[PATCH AUTOSEL 5.12 21/80] hwrng: exynos - Fix runtime PM imbalance on error

[PATCH AUTOSEL 5.12 21/80] hwrng: exynos - Fix runtime PM imbalance on error

[Sasha Levin]

From: Łukasz Stelmach <l.stelmach@samsung.com>

[ Upstream commit 0cdbabf8bb7a6147f5adf37dbc251e92a1bbc2c7 ]

pm_runtime_resume_and_get() wraps around pm_runtime_get_sync() and
decrements the runtime PM usage counter in case the latter function
fails and keeps the counter balanced.

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/hw_random/exynos-trng.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/hw_random/exynos-trng.c b/drivers/char/hw_random/exynos-trng.c
index 8e1fe3f8dd2d..c8db62bc5ff7 100644
--- a/drivers/char/hw_random/exynos-trng.c
+++ b/drivers/char/hw_random/exynos-trng.c
@@ -132,7 +132,7 @@ static int exynos_trng_probe(struct platform_device *pdev)
 		return PTR_ERR(trng->mem);
 
 	pm_runtime_enable(&pdev->dev);
-	ret = pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Could not get runtime PM.\n");
 		goto err_pm_get;
@@ -165,7 +165,7 @@ static int exynos_trng_probe(struct platform_device *pdev)
 	clk_disable_unprepare(trng->clk);
 
 err_clock:
-	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
 
 err_pm_get:
 	pm_runtime_disable(&pdev->dev);
-- 
2.30.2

[PATCH AUTOSEL 5.12 22/80] crypto: nx - add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 06676aa1f455c74e3ad1624cea3acb9ed2ef71ae ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/nx/nx-842-pseries.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index cc8dd3072b8b..8ee547ee378e 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -1069,6 +1069,7 @@ static const struct vio_device_id nx842_vio_driver_ids[] = {
 	{"ibm,compression-v1", "ibm,compression"},
 	{"", ""},
 };
+MODULE_DEVICE_TABLE(vio, nx842_vio_driver_ids);
 
 static struct vio_driver nx842_vio_driver = {
 	.name = KBUILD_MODNAME,
-- 
2.30.2

[PATCH AUTOSEL 5.12 31/80] crypto: qat - check return code of qat_hal_rd_rel_reg()

[Sasha Levin]

From: Jack Xu <jack.xu@intel.com>

[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]

Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.

This is to fix the following warning when compiling the driver with
clang scan-build:

    drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qat/qat_common/qat_hal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c
index bd3028126cbe..069f51621f0e 100644
--- a/drivers/crypto/qat/qat_common/qat_hal.c
+++ b/drivers/crypto/qat/qat_common/qat_hal.c
@@ -1417,7 +1417,11 @@ static int qat_hal_put_rel_wr_xfer(struct icp_qat_fw_loader_handle *handle,
 		pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr);
 		return -EINVAL;
 	}
-	qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+	status = qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+	if (status) {
+		pr_err("QAT: failed to read register");
+		return status;
+	}
 	gpr_addr = qat_hal_get_reg_addr(ICP_GPB_REL, gprnum);
 	data16low = 0xffff & data;
 	data16hi = 0xffff & (data >> 0x10);
-- 
2.30.2

[PATCH AUTOSEL 5.12 32/80] crypto: qat - remove unused macro in FW loader

[Sasha Levin]

From: Jack Xu <jack.xu@intel.com>

[ Upstream commit 9afe77cf25d9670e61b489fd52cc6f75fd7f6803 ]

Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.

This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:

    drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qat/qat_common/qat_uclo.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/qat/qat_common/qat_uclo.c b/drivers/crypto/qat/qat_common/qat_uclo.c
index 1fb5fc852f6b..6d95160e451e 100644
--- a/drivers/crypto/qat/qat_common/qat_uclo.c
+++ b/drivers/crypto/qat/qat_common/qat_uclo.c
@@ -342,7 +342,6 @@ static int qat_uclo_init_umem_seg(struct icp_qat_fw_loader_handle *handle,
 	return 0;
 }
 
-#define ICP_DH895XCC_PESRAM_BAR_SIZE 0x80000
 static int qat_uclo_init_ae_memory(struct icp_qat_fw_loader_handle *handle,
 				   struct icp_qat_uof_initmem *init_mem)
 {
-- 
2.30.2

[PATCH AUTOSEL 5.12 33/80] crypto: qce: skcipher: Fix incorrect sg count for dma transfers

[Sasha Levin]

From: Thara Gopinath <thara.gopinath@linaro.org>

[ Upstream commit 1339a7c3ba05137a2d2fe75f602311bbfc6fab33 ]

Use the sg count returned by dma_map_sg to call into
dmaengine_prep_slave_sg rather than using the original sg count. dma_map_sg
can merge consecutive sglist entries, thus making the original sg count
wrong. This is a fix for memory coruption issues observed while testing
encryption/decryption of large messages using libkcapi framework.

Patch has been tested further by running full suite of tcrypt.ko tests
including fuzz tests.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qce/skcipher.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/crypto/qce/skcipher.c b/drivers/crypto/qce/skcipher.c
index a2d3da0ad95f..5a6559131eac 100644
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -71,7 +71,7 @@ qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
 	struct scatterlist *sg;
 	bool diff_dst;
 	gfp_t gfp;
-	int ret;
+	int dst_nents, src_nents, ret;
 
 	rctx->iv = req->iv;
 	rctx->ivsize = crypto_skcipher_ivsize(skcipher);
@@ -122,21 +122,22 @@ qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
 	sg_mark_end(sg);
 	rctx->dst_sg = rctx->dst_tbl.sgl;
 
-	ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-	if (ret < 0)
+	dst_nents = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+	if (dst_nents < 0)
 		goto error_free;
 
 	if (diff_dst) {
-		ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-		if (ret < 0)
+		src_nents = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
+		if (src_nents < 0)
 			goto error_unmap_dst;
 		rctx->src_sg = req->src;
 	} else {
 		rctx->src_sg = rctx->dst_sg;
+		src_nents = dst_nents - 1;
 	}
 
-	ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
-			       rctx->dst_sg, rctx->dst_nents,
+	ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, src_nents,
+			       rctx->dst_sg, dst_nents,
 			       qce_skcipher_done, async_req);
 	if (ret)
 		goto error_unmap_src;
-- 
2.30.2

[PATCH AUTOSEL 5.12 45/80] crypto: hisilicon/sec - fixup 3des minimum key size declaration

[Sasha Levin]

From: Kai Ye <yekai13@huawei.com>

[ Upstream commit 6161f40c630bd7ced5f236cd5fbabec06e47afae ]

Fixup the 3des algorithm  minimum key size declaration.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 8adcbb327126..c86b01abd0a6 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -1513,11 +1513,11 @@ static struct skcipher_alg sec_skciphers[] = {
 			 AES_BLOCK_SIZE, AES_BLOCK_SIZE)
 
 	SEC_SKCIPHER_ALG("ecb(des3_ede)", sec_setkey_3des_ecb,
-			 SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE,
+			 SEC_DES3_3KEY_SIZE, SEC_DES3_3KEY_SIZE,
 			 DES3_EDE_BLOCK_SIZE, 0)
 
 	SEC_SKCIPHER_ALG("cbc(des3_ede)", sec_setkey_3des_cbc,
-			 SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE,
+			 SEC_DES3_3KEY_SIZE, SEC_DES3_3KEY_SIZE,
 			 DES3_EDE_BLOCK_SIZE, DES3_EDE_BLOCK_SIZE)
 
 	SEC_SKCIPHER_ALG("xts(sm4)", sec_setkey_sm4_xts,
-- 
2.30.2

[PATCH AUTOSEL 5.12 55/80] crypto: shash - avoid comparing pointers to exported functions under CFI

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 22ca9f4aaf431a9413dcc115dd590123307f274f ]

crypto_shash_alg_has_setkey() is implemented by testing whether the
.setkey() member of a struct shash_alg points to the default version,
called shash_no_setkey(). As crypto_shash_alg_has_setkey() is a static
inline, this requires shash_no_setkey() to be exported to modules.

Unfortunately, when building with CFI, function pointers are routed
via CFI stubs which are private to each module (or to the kernel proper)
and so this function pointer comparison may fail spuriously.

Let's fix this by turning crypto_shash_alg_has_setkey() into an out of
line function.

Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/shash.c                 | 18 +++++++++++++++---
 include/crypto/internal/hash.h |  8 +-------
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/crypto/shash.c b/crypto/shash.c
index 2e3433ad9762..0a0a50cb694f 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -20,12 +20,24 @@
 
 static const struct crypto_type crypto_shash_type;
 
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
-		    unsigned int keylen)
+static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+			   unsigned int keylen)
 {
 	return -ENOSYS;
 }
-EXPORT_SYMBOL_GPL(shash_no_setkey);
+
+/*
+ * Check whether an shash algorithm has a setkey function.
+ *
+ * For CFI compatibility, this must not be an inline function.  This is because
+ * when CFI is enabled, modules won't get the same address for shash_no_setkey
+ * (if it were exported, which inlining would require) as the core kernel will.
+ */
+bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
+{
+	return alg->setkey != shash_no_setkey;
+}
+EXPORT_SYMBOL_GPL(crypto_shash_alg_has_setkey);
 
 static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
 				  unsigned int keylen)
diff --git a/include/crypto/internal/hash.h b/include/crypto/internal/hash.h
index 0a288dddcf5b..25806141db59 100644
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -75,13 +75,7 @@ void crypto_unregister_ahashes(struct ahash_alg *algs, int count);
 int ahash_register_instance(struct crypto_template *tmpl,
 			    struct ahash_instance *inst);
 
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
-		    unsigned int keylen);
-
-static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
-{
-	return alg->setkey != shash_no_setkey;
-}
+bool crypto_shash_alg_has_setkey(struct shash_alg *alg);
 
 static inline bool crypto_shash_alg_needs_key(struct shash_alg *alg)
 {
-- 
2.30.2