[PATCH V4 4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes

[Anusha Rao <quic_anusha@quicinc.com>]

Enable crypto support for ipq9574.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
---
 Changes in V4:
	- Added bam compatible "qcom,bam-v1.7.4". This change depends on below patchset
	  https://lore.kernel.org/linux-arm-msm/20230519214813.2593271-2-bhupesh.sharma@linaro.org/
	- Picked up Reviewed-by tag.

 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index fea15f3cf910..1b0f535d1712 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -123,6 +123,26 @@
 			clock-names = "core";
 		};
 
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq9574-tlmm";
 			reg = <0x01000000 0x300000>;
-- 
2.17.1