Re: [PATCH net-next v1 02/10] :crypto: octeontx2: add SGv2 support for CN10KB or CN10KA B0

Kalesh Anakkur Purayil
2023-12-11T08:12:39Z

[-- Attachment #1.1: Type: text/plain, Size: 44903 bytes --]

Hi Srujana,

Looks like you ignored my comments on V1 of your patch.

On Mon, Dec 11, 2023 at 12:50 PM Srujana Challa <schalla@marvell.com> wrote:

> Scatter Gather input format for CPT has changed on CN10KB/CN10KA B0 HW
> to make it comapatible with NIX Scatter Gather format to support SG mode
> for inline IPsec. This patch modifies the code to make the driver works
> for the same. This patch also enables CPT firmware load for these chips.
>
> Signed-off-by: Srujana Challa <schalla@marvell.com>
> ---
> drivers/crypto/marvell/octeontx2/cn10k_cpt.c | 19 +-
> drivers/crypto/marvell/octeontx2/cn10k_cpt.h | 1 +
> .../marvell/octeontx2/otx2_cpt_common.h | 41 ++-
> .../marvell/octeontx2/otx2_cpt_hw_types.h | 3 +
> .../marvell/octeontx2/otx2_cpt_reqmgr.h | 293 ++++++++++++++++++
> drivers/crypto/marvell/octeontx2/otx2_cptlf.h | 2 +
> .../marvell/octeontx2/otx2_cptpf_main.c | 26 +-
> .../marvell/octeontx2/otx2_cptpf_mbox.c | 2 +-
> .../marvell/octeontx2/otx2_cptpf_ucode.c | 33 +-
> .../marvell/octeontx2/otx2_cptpf_ucode.h | 3 +-
> drivers/crypto/marvell/octeontx2/otx2_cptvf.h | 2 +
> .../marvell/octeontx2/otx2_cptvf_main.c | 13 +
> .../marvell/octeontx2/otx2_cptvf_mbox.c | 26 ++
> .../marvell/octeontx2/otx2_cptvf_reqmgr.c | 160 +---------
> 14 files changed, 447 insertions(+), 177 deletions(-)
>
> diff --git a/drivers/crypto/marvell/octeontx2/cn10k_cpt.c
> b/drivers/crypto/marvell/octeontx2/cn10k_cpt.c
> index 93d22b328991..b23ae3a020e0 100644
> --- a/drivers/crypto/marvell/octeontx2/cn10k_cpt.c
> +++ b/drivers/crypto/marvell/octeontx2/cn10k_cpt.c
> @@ -14,12 +14,14 @@ static struct cpt_hw_ops otx2_hw_ops = {
> .send_cmd = otx2_cpt_send_cmd,
> .cpt_get_compcode = otx2_cpt_get_compcode,
> .cpt_get_uc_compcode = otx2_cpt_get_uc_compcode,
> + .cpt_sg_info_create = otx2_sg_info_create,
> };
>
> static struct cpt_hw_ops cn10k_hw_ops = {
> .send_cmd = cn10k_cpt_send_cmd,
> .cpt_get_compcode = cn10k_cpt_get_compcode,
> .cpt_get_uc_compcode = cn10k_cpt_get_uc_compcode,
> + .cpt_sg_info_create = otx2_sg_info_create,
> };
>
> static void cn10k_cpt_send_cmd(union otx2_cpt_inst_s *cptinst, u32
> insts_num,
> @@ -78,12 +80,9 @@ int cn10k_cptvf_lmtst_init(struct otx2_cptvf_dev *cptvf)
> struct pci_dev *pdev = cptvf->pdev;
> resource_size_t offset, size;
>
> - if (!test_bit(CN10K_LMTST, &cptvf->cap_flag)) {
> - cptvf->lfs.ops = &otx2_hw_ops;
> + if (!test_bit(CN10K_LMTST, &cptvf->cap_flag))
> return 0;
> - }
>
> - cptvf->lfs.ops = &cn10k_hw_ops;
> offset = pci_resource_start(pdev, PCI_MBOX_BAR_NUM);
> size = pci_resource_len(pdev, PCI_MBOX_BAR_NUM);
> /* Map VF LMILINE region */
> @@ -96,3 +95,15 @@ int cn10k_cptvf_lmtst_init(struct otx2_cptvf_dev *cptvf)
> return 0;
> }
> EXPORT_SYMBOL_NS_GPL(cn10k_cptvf_lmtst_init, CRYPTO_DEV_OCTEONTX2_CPT);
> +
> +int cptvf_hw_ops_get(struct otx2_cptvf_dev *cptvf)
> +{
> + if (!test_bit(CN10K_LMTST, &cptvf->cap_flag)) {
> + cptvf->lfs.ops = &otx2_hw_ops;
> + return 0;
> + }
> + cptvf->lfs.ops = &cn10k_hw_ops;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_NS_GPL(cptvf_hw_ops_get, CRYPTO_DEV_OCTEONTX2_CPT);
>
[Kalesh]: You can make this function return void as it returns 0 always.
+void cptvf_hw_ops_get(struct otx2_cptvf_dev *cptvf)
+{
+ if (!test_bit(CN10K_LMTST, &cptvf->cap_flag))
+ cptvf->lfs.ops = &otx2_hw_ops;
+ else
+ cptvf->lfs.ops = &cn10k_hw_ops;
+}

> diff --git a/drivers/crypto/marvell/octeontx2/cn10k_cpt.h
> b/drivers/crypto/marvell/octeontx2/cn10k_cpt.h
> index aaefc7e38e06..0f714ee564f5 100644
> --- a/drivers/crypto/marvell/octeontx2/cn10k_cpt.h
> +++ b/drivers/crypto/marvell/octeontx2/cn10k_cpt.h
> @@ -30,5 +30,6 @@ static inline u8 otx2_cpt_get_uc_compcode(union
> otx2_cpt_res_s *result)
>
> int cn10k_cptpf_lmtst_init(struct otx2_cptpf_dev *cptpf);
> int cn10k_cptvf_lmtst_init(struct otx2_cptvf_dev *cptvf);
> +int cptvf_hw_ops_get(struct otx2_cptvf_dev *cptvf);
>
> #endif /* __CN10K_CPTLF_H */
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
> b/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
> index 46b778bbbee4..2a7544252444 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
> @@ -102,7 +102,10 @@ union otx2_cpt_eng_caps {
> u64 kasumi:1;
> u64 des:1;
> u64 crc:1;
> - u64 reserved_14_63:50;
> + u64 mmul:1;
> + u64 reserved_15_33:19;
> + u64 pdcp_chain:1;
> + u64 reserved_35_63:29;
> };
> };
>
> @@ -145,6 +148,41 @@ static inline bool is_dev_otx2(struct pci_dev *pdev)
> return false;
> }
>
> +static inline bool is_dev_cn10ka(struct pci_dev *pdev)
> +{
> + if (pdev->subsystem_device == CPT_PCI_SUBSYS_DEVID_CN10K_A)
> + return true;
> +
> + return false;
> +}
>
[Kalesh]: You can further simply this as:
return pdev->subsystem_device == CPT_PCI_SUBSYS_DEVID_CN10K_A

> +
> +static inline bool is_dev_cn10ka_ax(struct pci_dev *pdev)
> +{
> + if (pdev->subsystem_device == CPT_PCI_SUBSYS_DEVID_CN10K_A &&
> + ((pdev->revision & 0xFF) == 4 || (pdev->revision & 0xFF) ==
> 0x50 ||
> + (pdev->revision & 0xff) == 0x51))
> + return true;
> +
> + return false;
> +}
> +
> +static inline bool is_dev_cn10kb(struct pci_dev *pdev)
> +{
> + if (pdev->subsystem_device == CPT_PCI_SUBSYS_DEVID_CN10K_B)
> + return true;
> +
> + return false;
> +}
>
[Kalesh]: You can further simply this as:
return pdev->subsystem_device == CPT_PCI_SUBSYS_DEVID_CN10K_B

> +
> +static inline bool is_dev_cn10ka_b0(struct pci_dev *pdev)
> +{
> + if (pdev->subsystem_device == CPT_PCI_SUBSYS_DEVID_CN10K_A &&
> + (pdev->revision & 0xFF) == 0x54)
> + return true;
> +
> + return false;
> +}
> +
> static inline void otx2_cpt_set_hw_caps(struct pci_dev *pdev,
> unsigned long *cap_flag)
> {
> @@ -154,7 +192,6 @@ static inline void otx2_cpt_set_hw_caps(struct pci_dev
> *pdev,
> }
> }
>
> -
>
[Kalesh]: This change looks unrelated

> int otx2_cpt_send_ready_msg(struct otx2_mbox *mbox, struct pci_dev *pdev);
> int otx2_cpt_send_mbox_msg(struct otx2_mbox *mbox, struct pci_dev *pdev);
>
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_hw_types.h
> b/drivers/crypto/marvell/octeontx2/otx2_cpt_hw_types.h
> index 6f947978e4e8..756aee0c2b05 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_hw_types.h
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_hw_types.h
> @@ -13,6 +13,9 @@
> #define CN10K_CPT_PCI_PF_DEVICE_ID 0xA0F2
> #define CN10K_CPT_PCI_VF_DEVICE_ID 0xA0F3
>
> +#define CPT_PCI_SUBSYS_DEVID_CN10K_A 0xB900
> +#define CPT_PCI_SUBSYS_DEVID_CN10K_B 0xBD00
> +
> /* Mailbox interrupts offset */
> #define OTX2_CPT_PF_MBOX_INT 6
> #define OTX2_CPT_PF_INT_VEC_E_MBOXX(x, a) ((x) + (a))
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h
> b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h
> index dbb1ee746f4c..b0f426531a42 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h
> @@ -143,6 +143,8 @@ struct otx2_cpt_inst_info {
> unsigned long time_in;
> u32 dlen;
> u32 dma_len;
> + u64 gthr_sz;
> + u64 sctr_sz;
> u8 extra_time;
> };
>
> @@ -157,6 +159,16 @@ struct otx2_cpt_sglist_component {
> __be64 ptr3;
> };
>
> +struct cn10kb_cpt_sglist_component {
> + u16 len0;
> + u16 len1;
> + u16 len2;
> + u16 valid_segs;
> + u64 ptr0;
> + u64 ptr1;
> + u64 ptr2;
> +};
> +
> static inline void otx2_cpt_info_destroy(struct pci_dev *pdev,
> struct otx2_cpt_inst_info *info)
> {
> @@ -188,6 +200,287 @@ static inline void otx2_cpt_info_destroy(struct
> pci_dev *pdev,
> kfree(info);
> }
>
> +static inline int setup_sgio_components(struct pci_dev *pdev,
> + struct otx2_cpt_buf_ptr *list,
> + int buf_count, u8 *buffer)
> +{
> + struct otx2_cpt_sglist_component *sg_ptr = NULL;
> + int ret = 0, i, j;
> + int components;
> +
> + if (unlikely(!list)) {
> + dev_err(&pdev->dev, "Input list pointer is NULL\n");
> + return -EFAULT;
> + }
> +
> + for (i = 0; i < buf_count; i++) {
> + if (unlikely(!list[i].vptr))
> + continue;
> + list[i].dma_addr = dma_map_single(&pdev->dev, list[i].vptr,
> + list[i].size,
> + DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(&pdev->dev,
> list[i].dma_addr))) {
> + dev_err(&pdev->dev, "Dma mapping failed\n");
> + ret = -EIO;
> + goto sg_cleanup;
> + }
> + }
> + components = buf_count / 4;
> + sg_ptr = (struct otx2_cpt_sglist_component *)buffer;
> + for (i = 0; i < components; i++) {
> + sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size);
> + sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size);
> + sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size);
> + sg_ptr->len3 = cpu_to_be16(list[i * 4 + 3].size);
> + sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr);
> + sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr);
> + sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr);
> + sg_ptr->ptr3 = cpu_to_be64(list[i * 4 + 3].dma_addr);
> + sg_ptr++;
> + }
> + components = buf_count % 4;
> +
> + switch (components) {
> + case 3:
> + sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size);
> + sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr);
> + fallthrough;
> + case 2:
> + sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size);
> + sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr);
> + fallthrough;
> + case 1:
> + sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size);
> + sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr);
> + break;
> + default:
> + break;
> + }
> + return ret;
> +
> +sg_cleanup:
> + for (j = 0; j < i; j++) {
> + if (list[j].dma_addr) {
> + dma_unmap_single(&pdev->dev, list[j].dma_addr,
> + list[j].size, DMA_BIDIRECTIONAL);
> + }
> +
> + list[j].dma_addr = 0;
> + }
> + return ret;
> +}
> +
> +static inline int sgv2io_components_setup(struct pci_dev *pdev,
> + struct otx2_cpt_buf_ptr *list,
> + int buf_count, u8 *buffer)
> +{
> + struct cn10kb_cpt_sglist_component *sg_ptr = NULL;
> + int ret = 0, i, j;
> + int components;
>
[Kalesh]: maintain RCT order

> +
> + if (unlikely(!list)) {
> + dev_err(&pdev->dev, "Input list pointer is NULL\n");
> + return -EFAULT;
> + }
> +
> + for (i = 0; i < buf_count; i++) {
> + if (unlikely(!list[i].vptr))
> + continue;
> + list[i].dma_addr = dma_map_single(&pdev->dev, list[i].vptr,
> + list[i].size,
> + DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(&pdev->dev,
> list[i].dma_addr))) {
> + dev_err(&pdev->dev, "Dma mapping failed\n");
> + ret = -EIO;
> + goto sg_cleanup;
> + }
> + }
> + components = buf_count / 3;
> + sg_ptr = (struct cn10kb_cpt_sglist_component *)buffer;
> + for (i = 0; i < components; i++) {
> + sg_ptr->len0 = list[i * 3 + 0].size;
> + sg_ptr->len1 = list[i * 3 + 1].size;
> + sg_ptr->len2 = list[i * 3 + 2].size;
> + sg_ptr->ptr0 = list[i * 3 + 0].dma_addr;
> + sg_ptr->ptr1 = list[i * 3 + 1].dma_addr;
> + sg_ptr->ptr2 = list[i * 3 + 2].dma_addr;
> + sg_ptr->valid_segs = 3;
> + sg_ptr++;
> + }
> + components = buf_count % 3;
> +
> + sg_ptr->valid_segs = components;
> + switch (components) {
> + case 2:
> + sg_ptr->len1 = list[i * 3 + 1].size;
> + sg_ptr->ptr1 = list[i * 3 + 1].dma_addr;
> + fallthrough;
> + case 1:
> + sg_ptr->len0 = list[i * 3 + 0].size;
> + sg_ptr->ptr0 = list[i * 3 + 0].dma_addr;
> + break;
> + default:
> + break;
> + }
> + return ret;
> +
> +sg_cleanup:
> + for (j = 0; j < i; j++) {
> + if (list[j].dma_addr) {
> + dma_unmap_single(&pdev->dev, list[j].dma_addr,
> + list[j].size, DMA_BIDIRECTIONAL);
> + }
> +
> + list[j].dma_addr = 0;
> + }
> + return ret;
> +}
> +
> +static inline struct otx2_cpt_inst_info *cn10k_sgv2_info_create(
> + struct pci_dev *pdev,
> + struct otx2_cpt_req_info
> *req,
> + gfp_t gfp)
> +{
> + u32 dlen = 0, g_len, sg_len, info_len;
> + int align = OTX2_CPT_DMA_MINALIGN;
> + struct otx2_cpt_inst_info *info;
> + u16 g_sz_bytes, s_sz_bytes;
> + u32 total_mem_len;
> + int i;
> +
> + g_sz_bytes = ((req->in_cnt + 2) / 3) *
> + sizeof(struct cn10kb_cpt_sglist_component);
> + s_sz_bytes = ((req->out_cnt + 2) / 3) *
> + sizeof(struct cn10kb_cpt_sglist_component);
> +
> + g_len = ALIGN(g_sz_bytes, align);
> + sg_len = ALIGN(g_len + s_sz_bytes, align);
> + info_len = ALIGN(sizeof(*info), align);
> + total_mem_len = sg_len + info_len + sizeof(union otx2_cpt_res_s);
> +
> + info = kzalloc(total_mem_len, gfp);
> + if (unlikely(!info))
> + return NULL;
> +
> + for (i = 0; i < req->in_cnt; i++)
> + dlen += req->in[i].size;
> +
> + info->dlen = dlen;
> + info->in_buffer = (u8 *)info + info_len;
> + info->gthr_sz = req->in_cnt;
> + info->sctr_sz = req->out_cnt;
> +
> + /* Setup gather (input) components */
> + if (sgv2io_components_setup(pdev, req->in, req->in_cnt,
> + info->in_buffer)) {
> + dev_err(&pdev->dev, "Failed to setup gather list\n");
> + goto destroy_info;
> + }
> +
> + if (sgv2io_components_setup(pdev, req->out, req->out_cnt,
> + &info->in_buffer[g_len])) {
> + dev_err(&pdev->dev, "Failed to setup scatter list\n");
> + goto destroy_info;
> + }
> +
> + info->dma_len = total_mem_len - info_len;
> + info->dptr_baddr = dma_map_single(&pdev->dev, info->in_buffer,
> + info->dma_len,
> DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(&pdev->dev, info->dptr_baddr))) {
> + dev_err(&pdev->dev, "DMA Mapping failed for cpt req\n");
> + goto destroy_info;
> + }
> + info->rptr_baddr = info->dptr_baddr + g_len;
> + /*
> + * Get buffer for union otx2_cpt_res_s response
> + * structure and its physical address
> + */
> + info->completion_addr = info->in_buffer + sg_len;
> + info->comp_baddr = info->dptr_baddr + sg_len;
> +
> + return info;
> +
> +destroy_info:
> + otx2_cpt_info_destroy(pdev, info);
> + return NULL;
> +}
> +
> +/* SG list header size in bytes */
> +#define SG_LIST_HDR_SIZE 8
> +static inline struct otx2_cpt_inst_info *otx2_sg_info_create(
> + struct pci_dev *pdev,
> + struct otx2_cpt_req_info
> *req,
> + gfp_t gfp)
> +{
> + int align = OTX2_CPT_DMA_MINALIGN;
> + struct otx2_cpt_inst_info *info;
> + u32 dlen, align_dlen, info_len;
> + u16 g_sz_bytes, s_sz_bytes;
> + u32 total_mem_len;
> +
> + if (unlikely(req->in_cnt > OTX2_CPT_MAX_SG_IN_CNT ||
> + req->out_cnt > OTX2_CPT_MAX_SG_OUT_CNT)) {
> + dev_err(&pdev->dev, "Error too many sg components\n");
> + return NULL;
> + }
> +
> + g_sz_bytes = ((req->in_cnt + 3) / 4) *
> + sizeof(struct otx2_cpt_sglist_component);
> + s_sz_bytes = ((req->out_cnt + 3) / 4) *
> + sizeof(struct otx2_cpt_sglist_component);
> +
> + dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE;
> + align_dlen = ALIGN(dlen, align);
> + info_len = ALIGN(sizeof(*info), align);
> + total_mem_len = align_dlen + info_len + sizeof(union
> otx2_cpt_res_s);
> +
> + info = kzalloc(total_mem_len, gfp);
> + if (unlikely(!info))
> + return NULL;
> +
> + info->dlen = dlen;
> + info->in_buffer = (u8 *)info + info_len;
> +
> + ((u16 *)info->in_buffer)[0] = req->out_cnt;
> + ((u16 *)info->in_buffer)[1] = req->in_cnt;
> + ((u16 *)info->in_buffer)[2] = 0;
> + ((u16 *)info->in_buffer)[3] = 0;
> + cpu_to_be64s((u64 *)info->in_buffer);
> +
> + /* Setup gather (input) components */
> + if (setup_sgio_components(pdev, req->in, req->in_cnt,
> + &info->in_buffer[8])) {
> + dev_err(&pdev->dev, "Failed to setup gather list\n");
> + goto destroy_info;
> + }
> +
> + if (setup_sgio_components(pdev, req->out, req->out_cnt,
> + &info->in_buffer[8 + g_sz_bytes])) {
> + dev_err(&pdev->dev, "Failed to setup scatter list\n");
> + goto destroy_info;
> + }
> +
> + info->dma_len = total_mem_len - info_len;
> + info->dptr_baddr = dma_map_single(&pdev->dev, info->in_buffer,
> + info->dma_len,
> DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(&pdev->dev, info->dptr_baddr))) {
> + dev_err(&pdev->dev, "DMA Mapping failed for cpt req\n");
> + goto destroy_info;
> + }
> + /*
> + * Get buffer for union otx2_cpt_res_s response
> + * structure and its physical address
> + */
> + info->completion_addr = info->in_buffer + align_dlen;
> + info->comp_baddr = info->dptr_baddr + align_dlen;
> +
> + return info;
> +
> +destroy_info:
> + otx2_cpt_info_destroy(pdev, info);
>
[Kalesh]" Where is the memory allocated for "info" getting freed. The
memory is allocated locally inside this function.

> + return NULL;
> +}
> +
> struct otx2_cptlf_wqe;
> int otx2_cpt_do_request(struct pci_dev *pdev, struct otx2_cpt_req_info
> *req,
> int cpu_num);
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptlf.h
> b/drivers/crypto/marvell/octeontx2/otx2_cptlf.h
> index 5302fe3d0e6f..70138d65ba9e 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptlf.h
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptlf.h
> @@ -99,6 +99,8 @@ struct cpt_hw_ops {
> struct otx2_cptlf_info *lf);
> u8 (*cpt_get_compcode)(union otx2_cpt_res_s *result);
> u8 (*cpt_get_uc_compcode)(union otx2_cpt_res_s *result);
> + struct otx2_cpt_inst_info * (*cpt_sg_info_create)(struct pci_dev
> *pdev,
> + struct otx2_cpt_req_info *req, gfp_t
> gfp);
> };
>
> struct otx2_cptlfs_info {
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
> b/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
> index 5436b0d3685c..c64c50a964ed 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
> @@ -14,6 +14,8 @@
> #define OTX2_CPT_DRV_STRING "Marvell RVU CPT Physical Function Driver"
>
> #define CPT_UC_RID_CN9K_B0 1
> +#define CPT_UC_RID_CN10K_A 4
> +#define CPT_UC_RID_CN10K_B 5
>
> static void cptpf_enable_vfpf_mbox_intr(struct otx2_cptpf_dev *cptpf,
> int num_vfs)
> @@ -587,6 +589,26 @@ static int cpt_is_pf_usable(struct otx2_cptpf_dev
> *cptpf)
> return 0;
> }
>
> +static int cptpf_get_rid(struct pci_dev *pdev, struct otx2_cptpf_dev
> *cptpf)
> +{
> + struct otx2_cpt_eng_grps *eng_grps = &cptpf->eng_grps;
> + u64 reg_val = 0x0;
> +
> + if (is_dev_otx2(pdev)) {
> + eng_grps->rid = pdev->revision;
> + return 0;
> + }
> + otx2_cpt_read_af_reg(&cptpf->afpf_mbox, pdev, CPT_AF_CTL, &reg_val,
> + BLKADDR_CPT0);
> + if ((is_dev_cn10ka_b0(pdev) && (reg_val & BIT_ULL(18))) ||
> + is_dev_cn10ka_ax(pdev))
> + eng_grps->rid = CPT_UC_RID_CN10K_A;
> + else if (is_dev_cn10kb(pdev) || is_dev_cn10ka_b0(pdev))
> + eng_grps->rid = CPT_UC_RID_CN10K_B;
> +
> + return 0;
> +}
>
[Kalesh]: You can convert this function to return void as it always returns
0 always.

> +
> static void cptpf_check_block_implemented(struct otx2_cptpf_dev *cptpf)
> {
> u64 cfg;
> @@ -657,7 +679,9 @@ static int cptpf_sriov_enable(struct pci_dev *pdev,
> int num_vfs)
> ret = cptpf_register_vfpf_intr(cptpf, num_vfs);
> if (ret)
> goto destroy_flr;
> -
> + ret = cptpf_get_rid(pdev, cptpf);
> + if (ret)
> + goto disable_intr;
> /* Get CPT HW capabilities using LOAD_FVC operation. */
> ret = otx2_cpt_discover_eng_capabilities(cptpf);
> if (ret)
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_mbox.c
> b/drivers/crypto/marvell/octeontx2/otx2_cptpf_mbox.c
> index 480b3720f15a..390ed146d309 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_mbox.c
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_mbox.c
> @@ -78,7 +78,7 @@ static int handle_msg_get_caps(struct otx2_cptpf_dev
> *cptpf,
> rsp->hdr.sig = OTX2_MBOX_RSP_SIG;
> rsp->hdr.pcifunc = req->pcifunc;
> rsp->cpt_pf_drv_version = OTX2_CPT_PF_DRV_VERSION;
> - rsp->cpt_revision = cptpf->pdev->revision;
> + rsp->cpt_revision = cptpf->eng_grps.rid;
> memcpy(&rsp->eng_caps, &cptpf->eng_caps, sizeof(rsp->eng_caps));
>
> return 0;
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
> b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
> index 1958b797a421..7fccc348f66e 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
> @@ -117,12 +117,10 @@ static char *get_ucode_type_str(int ucode_type)
>
> static int get_ucode_type(struct device *dev,
> struct otx2_cpt_ucode_hdr *ucode_hdr,
> - int *ucode_type)
> + int *ucode_type, u16 rid)
> {
> - struct otx2_cptpf_dev *cptpf = dev_get_drvdata(dev);
> char ver_str_prefix[OTX2_CPT_UCODE_VER_STR_SZ];
> char tmp_ver_str[OTX2_CPT_UCODE_VER_STR_SZ];
> - struct pci_dev *pdev = cptpf->pdev;
> int i, val = 0;
> u8 nn;
>
> @@ -130,7 +128,7 @@ static int get_ucode_type(struct device *dev,
> for (i = 0; i < strlen(tmp_ver_str); i++)
> tmp_ver_str[i] = tolower(tmp_ver_str[i]);
>
> - sprintf(ver_str_prefix, "ocpt-%02d", pdev->revision);
> + sprintf(ver_str_prefix, "ocpt-%02d", rid);
> if (!strnstr(tmp_ver_str, ver_str_prefix,
> OTX2_CPT_UCODE_VER_STR_SZ))
> return -EINVAL;
>
> @@ -359,7 +357,7 @@ static int cpt_attach_and_enable_cores(struct
> otx2_cpt_eng_grp_info *eng_grp,
> }
>
> static int load_fw(struct device *dev, struct fw_info_t *fw_info,
> - char *filename)
> + char *filename, u16 rid)
> {
> struct otx2_cpt_ucode_hdr *ucode_hdr;
> struct otx2_cpt_uc_info_t *uc_info;
> @@ -375,7 +373,7 @@ static int load_fw(struct device *dev, struct
> fw_info_t *fw_info,
> goto free_uc_info;
>
> ucode_hdr = (struct otx2_cpt_ucode_hdr *)uc_info->fw->data;
> - ret = get_ucode_type(dev, ucode_hdr, &ucode_type);
> + ret = get_ucode_type(dev, ucode_hdr, &ucode_type, rid);
> if (ret)
> goto release_fw;
>
> @@ -389,6 +387,7 @@ static int load_fw(struct device *dev, struct
> fw_info_t *fw_info,
> set_ucode_filename(&uc_info->ucode, filename);
> memcpy(uc_info->ucode.ver_str, ucode_hdr->ver_str,
> OTX2_CPT_UCODE_VER_STR_SZ);
> + uc_info->ucode.ver_str[OTX2_CPT_UCODE_VER_STR_SZ] = 0;
> uc_info->ucode.ver_num = ucode_hdr->ver_num;
> uc_info->ucode.type = ucode_type;
> uc_info->ucode.size = ucode_size;
> @@ -448,7 +447,8 @@ static void print_uc_info(struct fw_info_t *fw_info)
> }
> }
>
> -static int cpt_ucode_load_fw(struct pci_dev *pdev, struct fw_info_t
> *fw_info)
> +static int cpt_ucode_load_fw(struct pci_dev *pdev, struct fw_info_t
> *fw_info,
> + u16 rid)
> {
> char filename[OTX2_CPT_NAME_LENGTH];
> char eng_type[8] = {0};
> @@ -462,9 +462,9 @@ static int cpt_ucode_load_fw(struct pci_dev *pdev,
> struct fw_info_t *fw_info)
> eng_type[i] = tolower(eng_type[i]);
>
> snprintf(filename, sizeof(filename), "mrvl/cpt%02d/%s.out",
> - pdev->revision, eng_type);
> + rid, eng_type);
> /* Request firmware for each engine type */
> - ret = load_fw(&pdev->dev, fw_info, filename);
> + ret = load_fw(&pdev->dev, fw_info, filename, rid);
> if (ret)
> goto release_fw;
> }
> @@ -1155,7 +1155,7 @@ int otx2_cpt_create_eng_grps(struct otx2_cptpf_dev
> *cptpf,
> if (eng_grps->is_grps_created)
> goto unlock;
>
> - ret = cpt_ucode_load_fw(pdev, &fw_info);
> + ret = cpt_ucode_load_fw(pdev, &fw_info, eng_grps->rid);
> if (ret)
> goto unlock;
>
> @@ -1230,14 +1230,16 @@ int otx2_cpt_create_eng_grps(struct otx2_cptpf_dev
> *cptpf,
> */
> rnm_to_cpt_errata_fixup(&pdev->dev);
>
> + otx2_cpt_read_af_reg(&cptpf->afpf_mbox, pdev, CPT_AF_CTL, &reg_val,
> + BLKADDR_CPT0);
> /*
> * Configure engine group mask to allow context prefetching
> * for the groups and enable random number request, to enable
> * CPT to request random numbers from RNM.
> */
> + reg_val |= OTX2_CPT_ALL_ENG_GRPS_MASK << 3 | BIT_ULL(16);
> otx2_cpt_write_af_reg(&cptpf->afpf_mbox, pdev, CPT_AF_CTL,
> - OTX2_CPT_ALL_ENG_GRPS_MASK << 3 |
> BIT_ULL(16),
> - BLKADDR_CPT0);
> + reg_val, BLKADDR_CPT0);
> /*
> * Set interval to periodically flush dirty data for the next
> * CTX cache entry. Set the interval count to maximum supported
> @@ -1412,7 +1414,7 @@ static int create_eng_caps_discovery_grps(struct
> pci_dev *pdev,
> int ret;
>
> mutex_lock(&eng_grps->lock);
> - ret = cpt_ucode_load_fw(pdev, &fw_info);
> + ret = cpt_ucode_load_fw(pdev, &fw_info, eng_grps->rid);
> if (ret) {
> mutex_unlock(&eng_grps->lock);
> return ret;
> @@ -1686,13 +1688,14 @@ int otx2_cpt_dl_custom_egrp_create(struct
> otx2_cptpf_dev *cptpf,
> goto err_unlock;
> }
> INIT_LIST_HEAD(&fw_info.ucodes);
> - ret = load_fw(dev, &fw_info, ucode_filename[0]);
> +
> + ret = load_fw(dev, &fw_info, ucode_filename[0], eng_grps->rid);
> if (ret) {
> dev_err(dev, "Unable to load firmware %s\n",
> ucode_filename[0]);
> goto err_unlock;
> }
> if (ucode_idx > 1) {
> - ret = load_fw(dev, &fw_info, ucode_filename[1]);
> + ret = load_fw(dev, &fw_info, ucode_filename[1],
> eng_grps->rid);
> if (ret) {
> dev_err(dev, "Unable to load firmware %s\n",
> ucode_filename[1]);
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.h
> b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.h
> index e69320a54b5d..365fe8943bd9 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.h
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.h
> @@ -73,7 +73,7 @@ struct otx2_cpt_ucode_hdr {
> };
>
> struct otx2_cpt_ucode {
> - u8 ver_str[OTX2_CPT_UCODE_VER_STR_SZ];/*
> + u8 ver_str[OTX2_CPT_UCODE_VER_STR_SZ + 1];/*
> * ucode version in readable
> * format
> */
> @@ -150,6 +150,7 @@ struct otx2_cpt_eng_grps {
> int engs_num; /* total number of engines
> supported */
> u8 eng_ref_cnt[OTX2_CPT_MAX_ENGINES];/* engines reference count */
> bool is_grps_created; /* Is the engine groups are already created
> */
> + u16 rid;
> };
> struct otx2_cptpf_dev;
> int otx2_cpt_init_eng_grps(struct pci_dev *pdev,
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf.h
> b/drivers/crypto/marvell/octeontx2/otx2_cptvf.h
> index 994291e90da1..11ab9af1df15 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptvf.h
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf.h
> @@ -22,6 +22,7 @@ struct otx2_cptvf_dev {
> int blkaddr;
> void *bbuf_base;
> unsigned long cap_flag;
> + u64 eng_caps[OTX2_CPT_MAX_ENG_TYPES];
> };
>
> irqreturn_t otx2_cptvf_pfvf_mbox_intr(int irq, void *arg);
> @@ -29,5 +30,6 @@ void otx2_cptvf_pfvf_mbox_handler(struct work_struct
> *work);
> int otx2_cptvf_send_eng_grp_num_msg(struct otx2_cptvf_dev *cptvf, int
> eng_type);
> int otx2_cptvf_send_kvf_limits_msg(struct otx2_cptvf_dev *cptvf);
> int otx2_cpt_mbox_bbuf_init(struct otx2_cptvf_dev *cptvf, struct pci_dev
> *pdev);
> +int otx2_cptvf_send_caps_msg(struct otx2_cptvf_dev *cptvf);
>
> #endif /* __OTX2_CPTVF_H */
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
> b/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
> index bac729c885f9..5d1e11135c17 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
> @@ -380,6 +380,19 @@ static int otx2_cptvf_probe(struct pci_dev *pdev,
> goto destroy_pfvf_mbox;
>
> cptvf->blkaddr = BLKADDR_CPT0;
> +
> + ret = cptvf_hw_ops_get(cptvf);
> + if (ret)
> + goto unregister_interrupts;
>
[Kalesh]: No need to check return value here. See my other comment above.

> +
> + ret = otx2_cptvf_send_caps_msg(cptvf);
> + if (ret) {
> + dev_err(&pdev->dev, "Couldn't get CPT engine
> capabilities.\n");
> + goto unregister_interrupts;
> + }
> + if (cptvf->eng_caps[OTX2_CPT_SE_TYPES] & BIT_ULL(35))
> + cptvf->lfs.ops->cpt_sg_info_create =
> cn10k_sgv2_info_create;
> +
> /* Initialize CPT LFs */
> ret = cptvf_lf_init(cptvf);
> if (ret)
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf_mbox.c
> b/drivers/crypto/marvell/octeontx2/otx2_cptvf_mbox.c
> index 75c403f2b1d9..f68da1d08fdf 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptvf_mbox.c
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf_mbox.c
> @@ -72,6 +72,7 @@ static void process_pfvf_mbox_mbox_msg(struct
> otx2_cptvf_dev *cptvf,
> struct otx2_cptlfs_info *lfs = &cptvf->lfs;
> struct otx2_cpt_kvf_limits_rsp *rsp_limits;
> struct otx2_cpt_egrp_num_rsp *rsp_grp;
> + struct otx2_cpt_caps_rsp *eng_caps;
> struct cpt_rd_wr_reg_msg *rsp_reg;
> struct msix_offset_rsp *rsp_msix;
> int i;
> @@ -127,6 +128,11 @@ static void process_pfvf_mbox_mbox_msg(struct
> otx2_cptvf_dev *cptvf,
> rsp_limits = (struct otx2_cpt_kvf_limits_rsp *) msg;
> cptvf->lfs.kvf_limits = rsp_limits->kvf_limits;
> break;
> + case MBOX_MSG_GET_CAPS:
> + eng_caps = (struct otx2_cpt_caps_rsp *)msg;
> + memcpy(cptvf->eng_caps, eng_caps->eng_caps,
> + sizeof(cptvf->eng_caps));
> + break;
> default:
> dev_err(&cptvf->pdev->dev, "Unsupported msg %d
> received.\n",
> msg->id);
> @@ -205,3 +211,23 @@ int otx2_cptvf_send_kvf_limits_msg(struct
> otx2_cptvf_dev *cptvf)
>
> return otx2_cpt_send_mbox_msg(mbox, pdev);
> }
> +
> +int otx2_cptvf_send_caps_msg(struct otx2_cptvf_dev *cptvf)
> +{
> + struct otx2_mbox *mbox = &cptvf->pfvf_mbox;
> + struct pci_dev *pdev = cptvf->pdev;
> + struct mbox_msghdr *req;
> +
> + req = (struct mbox_msghdr *)
> + otx2_mbox_alloc_msg_rsp(mbox, 0, sizeof(*req),
> + sizeof(struct otx2_cpt_caps_rsp));
> + if (!req) {
> + dev_err(&pdev->dev, "RVU MBOX failed to get message.\n");
> + return -EFAULT;
> + }
> + req->id = MBOX_MSG_GET_CAPS;
> + req->sig = OTX2_MBOX_REQ_SIG;
> + req->pcifunc = OTX2_CPT_RVU_PFFUNC(cptvf->vf_id, 0);
> +
> + return otx2_cpt_send_mbox_msg(mbox, pdev);
> +}
> diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c
> b/drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c
> index 811ded72ce5f..997a2eb60c66 100644
> --- a/drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c
> +++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c
> @@ -4,9 +4,6 @@
> #include "otx2_cptvf.h"
> #include "otx2_cpt_common.h"
>
> -/* SG list header size in bytes */
> -#define SG_LIST_HDR_SIZE 8
> -
> /* Default timeout when waiting for free pending entry in us */
> #define CPT_PENTRY_TIMEOUT 1000
> #define CPT_PENTRY_STEP 50
> @@ -26,9 +23,9 @@ static void otx2_cpt_dump_sg_list(struct pci_dev *pdev,
>
> pr_debug("Gather list size %d\n", req->in_cnt);
> for (i = 0; i < req->in_cnt; i++) {
> - pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%p\n", i,
> + pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%llx\n",
> i,
> req->in[i].size, req->in[i].vptr,
> - (void *) req->in[i].dma_addr);
> + req->in[i].dma_addr);
> pr_debug("Buffer hexdump (%d bytes)\n",
> req->in[i].size);
> print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1,
> @@ -36,9 +33,9 @@ static void otx2_cpt_dump_sg_list(struct pci_dev *pdev,
> }
> pr_debug("Scatter list size %d\n", req->out_cnt);
> for (i = 0; i < req->out_cnt; i++) {
> - pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%p\n", i,
> + pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%llx\n",
> i,
> req->out[i].size, req->out[i].vptr,
> - (void *) req->out[i].dma_addr);
> + req->out[i].dma_addr);
> pr_debug("Buffer hexdump (%d bytes)\n", req->out[i].size);
> print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1,
> req->out[i].vptr, req->out[i].size,
> false);
> @@ -84,149 +81,6 @@ static inline void free_pentry(struct
> otx2_cpt_pending_entry *pentry)
> pentry->busy = false;
> }
>
> -static inline int setup_sgio_components(struct pci_dev *pdev,
> - struct otx2_cpt_buf_ptr *list,
> - int buf_count, u8 *buffer)
> -{
> - struct otx2_cpt_sglist_component *sg_ptr = NULL;
> - int ret = 0, i, j;
> - int components;
> -
> - if (unlikely(!list)) {
> - dev_err(&pdev->dev, "Input list pointer is NULL\n");
> - return -EFAULT;
> - }
> -
> - for (i = 0; i < buf_count; i++) {
> - if (unlikely(!list[i].vptr))
> - continue;
> - list[i].dma_addr = dma_map_single(&pdev->dev, list[i].vptr,
> - list[i].size,
> - DMA_BIDIRECTIONAL);
> - if (unlikely(dma_mapping_error(&pdev->dev,
> list[i].dma_addr))) {
> - dev_err(&pdev->dev, "Dma mapping failed\n");
> - ret = -EIO;
> - goto sg_cleanup;
> - }
> - }
> - components = buf_count / 4;
> - sg_ptr = (struct otx2_cpt_sglist_component *)buffer;
> - for (i = 0; i < components; i++) {
> - sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size);
> - sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size);
> - sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size);
> - sg_ptr->len3 = cpu_to_be16(list[i * 4 + 3].size);
> - sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr);
> - sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr);
> - sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr);
> - sg_ptr->ptr3 = cpu_to_be64(list[i * 4 + 3].dma_addr);
> - sg_ptr++;
> - }
> - components = buf_count % 4;
> -
> - switch (components) {
> - case 3:
> - sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size);
> - sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr);
> - fallthrough;
> - case 2:
> - sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size);
> - sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr);
> - fallthrough;
> - case 1:
> - sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size);
> - sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr);
> - break;
> - default:
> - break;
> - }
> - return ret;
> -
> -sg_cleanup:
> - for (j = 0; j < i; j++) {
> - if (list[j].dma_addr) {
> - dma_unmap_single(&pdev->dev, list[j].dma_addr,
> - list[j].size, DMA_BIDIRECTIONAL);
> - }
> -
> - list[j].dma_addr = 0;
> - }
> - return ret;
> -}
> -
> -static inline struct otx2_cpt_inst_info *info_create(struct pci_dev *pdev,
> - struct otx2_cpt_req_info
> *req,
> - gfp_t gfp)
> -{
> - int align = OTX2_CPT_DMA_MINALIGN;
> - struct otx2_cpt_inst_info *info;
> - u32 dlen, align_dlen, info_len;
> - u16 g_sz_bytes, s_sz_bytes;
> - u32 total_mem_len;
> -
> - if (unlikely(req->in_cnt > OTX2_CPT_MAX_SG_IN_CNT ||
> - req->out_cnt > OTX2_CPT_MAX_SG_OUT_CNT)) {
> - dev_err(&pdev->dev, "Error too many sg components\n");
> - return NULL;
> - }
> -
> - g_sz_bytes = ((req->in_cnt + 3) / 4) *
> - sizeof(struct otx2_cpt_sglist_component);
> - s_sz_bytes = ((req->out_cnt + 3) / 4) *
> - sizeof(struct otx2_cpt_sglist_component);
> -
> - dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE;
> - align_dlen = ALIGN(dlen, align);
> - info_len = ALIGN(sizeof(*info), align);
> - total_mem_len = align_dlen + info_len + sizeof(union
> otx2_cpt_res_s);
> -
> - info = kzalloc(total_mem_len, gfp);
> - if (unlikely(!info))
> - return NULL;
> -
> - info->dlen = dlen;
> - info->in_buffer = (u8 *)info + info_len;
> -
> - ((u16 *)info->in_buffer)[0] = req->out_cnt;
> - ((u16 *)info->in_buffer)[1] = req->in_cnt;
> - ((u16 *)info->in_buffer)[2] = 0;
> - ((u16 *)info->in_buffer)[3] = 0;
> - cpu_to_be64s((u64 *)info->in_buffer);
> -
> - /* Setup gather (input) components */
> - if (setup_sgio_components(pdev, req->in, req->in_cnt,
> - &info->in_buffer[8])) {
> - dev_err(&pdev->dev, "Failed to setup gather list\n");
> - goto destroy_info;
> - }
> -
> - if (setup_sgio_components(pdev, req->out, req->out_cnt,
> - &info->in_buffer[8 + g_sz_bytes])) {
> - dev_err(&pdev->dev, "Failed to setup scatter list\n");
> - goto destroy_info;
> - }
> -
> - info->dma_len = total_mem_len - info_len;
> - info->dptr_baddr = dma_map_single(&pdev->dev, info->in_buffer,
> - info->dma_len,
> DMA_BIDIRECTIONAL);
> - if (unlikely(dma_mapping_error(&pdev->dev, info->dptr_baddr))) {
> - dev_err(&pdev->dev, "DMA Mapping failed for cpt req\n");
> - goto destroy_info;
> - }
> - /*
> - * Get buffer for union otx2_cpt_res_s response
> - * structure and its physical address
> - */
> - info->completion_addr = info->in_buffer + align_dlen;
> - info->comp_baddr = info->dptr_baddr + align_dlen;
> -
> - return info;
> -
> -destroy_info:
> - otx2_cpt_info_destroy(pdev, info);
> - return NULL;
> -}
> -
> static int process_request(struct pci_dev *pdev, struct otx2_cpt_req_info
> *req,
> struct otx2_cpt_pending_queue *pqueue,
> struct otx2_cptlf_info *lf)
> @@ -247,7 +101,7 @@ static int process_request(struct pci_dev *pdev,
> struct otx2_cpt_req_info *req,
> if (unlikely(!otx2_cptlf_started(lf->lfs)))
> return -ENODEV;
>
> - info = info_create(pdev, req, gfp);
> + info = lf->lfs->ops->cpt_sg_info_create(pdev, req, gfp);
> if (unlikely(!info)) {
> dev_err(&pdev->dev, "Setting up cpt inst info failed");
> return -ENOMEM;
> @@ -303,8 +157,8 @@ static int process_request(struct pci_dev *pdev,
> struct otx2_cpt_req_info *req,
>
> /* 64-bit swap for microcode data reads, not needed for addresses*/
> cpu_to_be64s(&iq_cmd.cmd.u);
> - iq_cmd.dptr = info->dptr_baddr;
> - iq_cmd.rptr = 0;
> + iq_cmd.dptr = info->dptr_baddr | info->gthr_sz << 60;
> + iq_cmd.rptr = info->rptr_baddr | info->sctr_sz << 60;
> iq_cmd.cptr.u = 0;
> iq_cmd.cptr.s.grp = ctrl->s.grp;
>
> --
> 2.25.1
>
>
>

--
Regards,
Kalesh A P

[-- Attachment #1.2: Type: text/html, Size: 54824 bytes --]

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4239 bytes --]