From: Joachim Vandersmissen <git@jvdsn.com>
To: linux-crypto@vger.kernel.org, Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Howells <dhowells@redhat.com>, Simo Sorce <simo@redhat.com>,
Stephan Mueller <smueller@chronox.de>,
Joachim Vandersmissen <git@jvdsn.com>
Subject: [PATCH v2 2/2] certs: Add ECDSA signature verification self-test
Date: Sat, 20 Apr 2024 00:42:43 -0500 [thread overview]
Message-ID: <20240420054243.176901-2-git@jvdsn.com> (raw)
In-Reply-To: <20240420054243.176901-1-git@jvdsn.com>
Commit c27b2d2012e1 ("crypto: testmgr - allow ecdsa-nist-p256 and -p384
in FIPS mode") enabled support for ECDSA in crypto/testmgr.c. The
PKCS#7 signature verification API builds upon the KCAPI primitives to
perform its high-level operations. Therefore, this change in testmgr.c
also allows ECDSA to be used by the PKCS#7 signature verification API
(in FIPS mode).
However, from a FIPS perspective, the PKCS#7 signature verification API
is a distinct "service" from the KCAPI primitives. This is because the
PKCS#7 API performs a "full" signature verification, which consists of
both hashing the data to be verified, and the public key operation.
On the other hand, the KCAPI primitive does not perform this hashing
step - it accepts pre-hashed data from the caller and only performs the
public key operation.
For this reason, the ECDSA self-tests in crypto/testmgr.c are not
sufficient to cover ECDSA signature verification offered by the PKCS#7
API. This is reflected by the self-test already present in this file
for RSA PKCS#1 v1.5 signature verification.
The solution is simply to add a second self-test here for ECDSA. P-256
with SHA-256 hashing was chosen as those parameters should remain
FIPS-approved for the foreseeable future, while keeping the performance
impact to a minimum. The ECDSA certificate and PKCS#7 signed data was
generated using OpenSSL. The input data is identical to the input data
for the existing RSA self-test.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
---
crypto/asymmetric_keys/Makefile | 1 +
crypto/asymmetric_keys/selftest.c | 1 +
crypto/asymmetric_keys/selftest.h | 6 ++
crypto/asymmetric_keys/selftest_ecdsa.c | 89 +++++++++++++++++++++++++
4 files changed, 97 insertions(+)
create mode 100644 crypto/asymmetric_keys/selftest_ecdsa.c
diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
index 4db6968132e9..55728d7aa979 100644
--- a/crypto/asymmetric_keys/Makefile
+++ b/crypto/asymmetric_keys/Makefile
@@ -25,6 +25,7 @@ x509_key_parser-y := \
obj-$(CONFIG_FIPS_SIGNATURE_SELFTEST) += x509_selftest.o
x509_selftest-y += selftest.o
x509_selftest-$(CONFIG_CRYPTO_RSA) += selftest_rsa.o
+x509_selftest-$(CONFIG_CRYPTO_ECDSA) += selftest_ecdsa.o
$(obj)/x509_cert_parser.o: \
$(obj)/x509.asn1.h \
diff --git a/crypto/asymmetric_keys/selftest.c b/crypto/asymmetric_keys/selftest.c
index ec289d2d065c..98dc5cdfdebe 100644
--- a/crypto/asymmetric_keys/selftest.c
+++ b/crypto/asymmetric_keys/selftest.c
@@ -61,6 +61,7 @@ void fips_signature_selftest(const char *name,
static int __init fips_signature_selftest_init(void)
{
fips_signature_selftest_rsa();
+ fips_signature_selftest_ecdsa();
return 0;
}
diff --git a/crypto/asymmetric_keys/selftest.h b/crypto/asymmetric_keys/selftest.h
index 3203de306619..279c8f22ca3d 100644
--- a/crypto/asymmetric_keys/selftest.h
+++ b/crypto/asymmetric_keys/selftest.h
@@ -14,3 +14,9 @@ void __init fips_signature_selftest_rsa(void);
#else
static inline void __init fips_signature_selftest_rsa(void) { }
#endif
+
+#ifdef CONFIG_CRYPTO_ECDSA
+void __init fips_signature_selftest_ecdsa(void);
+#else
+static inline void __init fips_signature_selftest_ecdsa(void) { }
+#endif
diff --git a/crypto/asymmetric_keys/selftest_ecdsa.c b/crypto/asymmetric_keys/selftest_ecdsa.c
new file mode 100644
index 000000000000..3ee2e4ea9e3f
--- /dev/null
+++ b/crypto/asymmetric_keys/selftest_ecdsa.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Self-tests for PKCS#7 ECDSA signature verification.
+ *
+ * Copyright (C) 2024 Joachim Vandersmissen <git@jvdsn.com>
+ */
+
+#include <linux/module.h>
+#include "selftest.h"
+
+/*
+ * Set of X.509 certificates to provide public keys for the tests. These will
+ * be loaded into a temporary keyring for the duration of the testing.
+ */
+static const u8 certs_selftest_ecdsa_keys[] __initconst = {
+ /* P-256 ECDSA certificate */
+ "\x30\x82\x01\xd4\x30\x82\x01\x7b\xa0\x03\x02\x01\x02\x02\x14\x2e"
+ "\xea\x64\x8d\x7f\x17\xe6\x2e\x9e\x58\x69\xc8\x87\xc6\x8e\x1b\xd0"
+ "\xf8\x6f\xde\x30\x0a\x06\x08\x2a\x86\x48\xce\x3d\x04\x03\x02\x30"
+ "\x3a\x31\x38\x30\x36\x06\x03\x55\x04\x03\x0c\x2f\x43\x65\x72\x74"
+ "\x69\x66\x69\x63\x61\x74\x65\x20\x76\x65\x72\x69\x66\x69\x63\x61"
+ "\x74\x69\x6f\x6e\x20\x45\x43\x44\x53\x41\x20\x73\x65\x6c\x66\x2d"
+ "\x74\x65\x73\x74\x69\x6e\x67\x20\x6b\x65\x79\x30\x20\x17\x0d\x32"
+ "\x34\x30\x34\x31\x33\x32\x32\x31\x36\x32\x36\x5a\x18\x0f\x32\x31"
+ "\x32\x34\x30\x33\x32\x30\x32\x32\x31\x36\x32\x36\x5a\x30\x3a\x31"
+ "\x38\x30\x36\x06\x03\x55\x04\x03\x0c\x2f\x43\x65\x72\x74\x69\x66"
+ "\x69\x63\x61\x74\x65\x20\x76\x65\x72\x69\x66\x69\x63\x61\x74\x69"
+ "\x6f\x6e\x20\x45\x43\x44\x53\x41\x20\x73\x65\x6c\x66\x2d\x74\x65"
+ "\x73\x74\x69\x6e\x67\x20\x6b\x65\x79\x30\x59\x30\x13\x06\x07\x2a"
+ "\x86\x48\xce\x3d\x02\x01\x06\x08\x2a\x86\x48\xce\x3d\x03\x01\x07"
+ "\x03\x42\x00\x04\x07\xe5\x6b\x51\xaf\xfc\x19\x41\x2c\x88\x92\x6b"
+ "\x77\x57\x71\x03\x9e\xe2\xfe\x6e\x6a\x71\x4e\xc7\x29\x9f\x90\xe1"
+ "\x77\x18\x9f\xc2\xe7\x0a\x82\xd0\x8a\xe1\x81\xa9\x71\x7c\x5a\x73"
+ "\xfb\x25\xb9\x5b\x1e\x24\x8c\x73\x9f\xf8\x38\xf8\x48\xb4\xad\x16"
+ "\x19\xc0\x22\xc6\xa3\x5d\x30\x5b\x30\x1d\x06\x03\x55\x1d\x0e\x04"
+ "\x16\x04\x14\x29\x00\xbc\xea\x1d\xeb\x7b\xc8\x47\x9a\x84\xa2\x3d"
+ "\x75\x8e\xfd\xfd\xd2\xb2\xd3\x30\x1f\x06\x03\x55\x1d\x23\x04\x18"
+ "\x30\x16\x80\x14\x29\x00\xbc\xea\x1d\xeb\x7b\xc8\x47\x9a\x84\xa2"
+ "\x3d\x75\x8e\xfd\xfd\xd2\xb2\xd3\x30\x0c\x06\x03\x55\x1d\x13\x01"
+ "\x01\xff\x04\x02\x30\x00\x30\x0b\x06\x03\x55\x1d\x0f\x04\x04\x03"
+ "\x02\x07\x80\x30\x0a\x06\x08\x2a\x86\x48\xce\x3d\x04\x03\x02\x03"
+ "\x47\x00\x30\x44\x02\x20\x1a\xd7\xac\x07\xc8\x97\x38\xf4\x89\x43"
+ "\x7e\xc7\x66\x6e\xa5\x00\x7c\x12\x1d\xb4\x09\x76\x0c\x99\x6b\x8c"
+ "\x26\x5d\xe9\x70\x5c\xb4\x02\x20\x73\xb7\xc7\x7a\x5a\xdb\x67\x0a"
+ "\x96\x42\x19\xcf\x4f\x67\x4f\x35\x6a\xee\x29\x25\xf2\x4f\xc8\x10"
+ "\x14\x9d\x79\x69\x1c\x7a\xd7\x5d"
+};
+
+
+/*
+ * Signed data and detached signature blobs that form the verification tests.
+ */
+static const u8 certs_selftest_ecdsa_data[] __initconst = {
+ "\x54\x68\x69\x73\x20\x69\x73\x20\x73\x6f\x6d\x65\x20\x74\x65\x73"
+ "\x74\x20\x64\x61\x74\x61\x20\x75\x73\x65\x64\x20\x66\x6f\x72\x20"
+ "\x73\x65\x6c\x66\x2d\x74\x65\x73\x74\x69\x6e\x67\x20\x63\x65\x72"
+ "\x74\x69\x66\x69\x63\x61\x74\x65\x20\x76\x65\x72\x69\x66\x69\x63"
+ "\x61\x74\x69\x6f\x6e\x2e\x0a"
+};
+
+static const u8 certs_selftest_ecdsa_sig[] __initconst = {
+ /* ECDSA signature using SHA-256 */
+ "\x30\x81\xf4\x06\x09\x2a\x86\x48\x86\xf7\x0d\x01\x07\x02\xa0\x81"
+ "\xe6\x30\x81\xe3\x02\x01\x01\x31\x0f\x30\x0d\x06\x09\x60\x86\x48"
+ "\x01\x65\x03\x04\x02\x01\x05\x00\x30\x0b\x06\x09\x2a\x86\x48\x86"
+ "\xf7\x0d\x01\x07\x01\x31\x81\xbf\x30\x81\xbc\x02\x01\x01\x30\x52"
+ "\x30\x3a\x31\x38\x30\x36\x06\x03\x55\x04\x03\x0c\x2f\x43\x65\x72"
+ "\x74\x69\x66\x69\x63\x61\x74\x65\x20\x76\x65\x72\x69\x66\x69\x63"
+ "\x61\x74\x69\x6f\x6e\x20\x45\x43\x44\x53\x41\x20\x73\x65\x6c\x66"
+ "\x2d\x74\x65\x73\x74\x69\x6e\x67\x20\x6b\x65\x79\x02\x14\x2e\xea"
+ "\x64\x8d\x7f\x17\xe6\x2e\x9e\x58\x69\xc8\x87\xc6\x8e\x1b\xd0\xf8"
+ "\x6f\xde\x30\x0d\x06\x09\x60\x86\x48\x01\x65\x03\x04\x02\x01\x05"
+ "\x00\x30\x0a\x06\x08\x2a\x86\x48\xce\x3d\x04\x03\x02\x04\x48\x30"
+ "\x46\x02\x21\x00\x86\xd1\xf4\x06\xb6\x49\x79\xf9\x09\x5f\x35\x1a"
+ "\x94\x7e\x0e\x1a\x12\x4d\xd9\xe6\x2a\x2d\xcf\x2d\x0a\xee\x88\x76"
+ "\xe0\x35\xf3\xeb\x02\x21\x00\xdf\x11\x8a\xab\x31\xf6\x3c\x1f\x32"
+ "\x43\x94\xe2\xb8\x35\xc9\xf3\x12\x4e\x9b\x31\x08\x10\x5d\x8d\xe2"
+ "\x43\x0a\x5f\xf5\xfd\xa2\xf1"
+};
+
+void __init fips_signature_selftest_ecdsa(void)
+{
+ fips_signature_selftest("ECDSA",
+ certs_selftest_ecdsa_keys,
+ sizeof(certs_selftest_ecdsa_keys) - 1,
+ certs_selftest_ecdsa_data,
+ sizeof(certs_selftest_ecdsa_data) - 1,
+ certs_selftest_ecdsa_sig,
+ sizeof(certs_selftest_ecdsa_sig) - 1);
+}
--
2.44.0
next prev parent reply other threads:[~2024-04-20 5:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-20 5:42 [PATCH v2 1/2] certs: Move RSA self-test data to separate file Joachim Vandersmissen
2024-04-20 5:42 ` Joachim Vandersmissen [this message]
2024-04-25 5:18 ` Herbert Xu
2024-05-01 2:52 ` Joachim Vandersmissen
2024-05-01 2:58 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240420054243.176901-2-git@jvdsn.com \
--to=git@jvdsn.com \
--cc=dhowells@redhat.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=simo@redhat.com \
--cc=smueller@chronox.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).