* [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
@ 2024-10-04 9:41 Sakari Ailus
2024-10-04 9:41 ` [PATCH 06/51] crypto: " Sakari Ailus
2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
0 siblings, 2 replies; 13+ messages in thread
From: Sakari Ailus @ 2024-10-04 9:41 UTC (permalink / raw)
To: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi
Cc: laurent.pinchart, rafael, Andy Shevchenko
Hello everyone,
This set will switch the users of pm_runtime_put_autosuspend() to
__pm_runtime_put_autosuspend() while the former will soon be re-purposed
to include a call to pm_runtime_mark_last_busy(). The two are almost
always used together, apart from bugs which are likely common. Going
forward, most new users should be using pm_runtime_put_autosuspend().
Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
and pm_runtime_mark_last_busy().
The diff in these patches have been generated using the following
Coccinelle script (besides a manual change in
drivers/iio/magnetometer/af8133j.c):
----------8<-------------------
@@
expression E1;
@@
- pm_runtime_put_autosuspend(E1)
+ __pm_runtime_put_autosuspend(E1)
----------8<-------------------
These patches are on top of today's linux-next (i.e. next-20241004).
Sakari Ailus (51):
accel/ivpu: Switch to __pm_runtime_put_autosuspend()
bluetooth: Switch to __pm_runtime_put_autosuspend()
bus: sunxi-rsb: Switch to __pm_runtime_put_autosuspend()
hwrng: Switch to __pm_runtime_put_autosuspend()
clk: Switch to __pm_runtime_put_autosuspend()
crypto: Switch to __pm_runtime_put_autosuspend()
dmaengine: Switch to __pm_runtime_put_autosuspend()
gpio: Switch to __pm_runtime_put_autosuspend()
drm/amd: Switch to __pm_runtime_put_autosuspend()
drm/nouveau: Switch to __pm_runtime_put_autosuspend()
drm/radeon: Switch to __pm_runtime_put_autosuspend()
drm/panfrost: Switch to __pm_runtime_put_autosuspend()
drivers: drm: Switch to __pm_runtime_put_autosuspend()
HSI: omap_ssi_port: Switch to __pm_runtime_put_autosuspend()
stm class: Switch to __pm_runtime_put_autosuspend()
i2c: Switch to __pm_runtime_put_autosuspend()
i3c: master: svc: Switch to __pm_runtime_put_autosuspend()
i3c: dw: Switch to __pm_runtime_put_autosuspend()
iio: Switch to __pm_runtime_put_autosuspend()
Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
iommu/arm-smmu: Switch to __pm_runtime_put_autosuspend()
irqchip/imx-irqsteer: Switch to __pm_runtime_put_autosuspend()
mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
media: Switch to __pm_runtime_put_autosuspend()
mfd: Switch to __pm_runtime_put_autosuspend()
mei: Switch to __pm_runtime_put_autosuspend()
mmc: Switch to __pm_runtime_put_autosuspend()
mtd: rawnand: gpmi: Switch to __pm_runtime_put_autosuspend()
net: Switch to __pm_runtime_put_autosuspend()
nfc: trf7970a: Switch to __pm_runtime_put_autosuspend()
PCI/portdrv: Switch to __pm_runtime_put_autosuspend()
phy: motorola: phy-mapphone-mdm6600: Switch to
__pm_runtime_put_autosuspend()
phy: ti: phy-twl4030-usb: Switch to __pm_runtime_put_autosuspend()
power: Switch to __pm_runtime_put_autosuspend()
pwm: img: Switch to __pm_runtime_put_autosuspend()
regulator: stm32-vrefbuf: Switch to __pm_runtime_put_autosuspend()
remoteproc: omap: Switch to __pm_runtime_put_autosuspend()
slimbus: Switch to __pm_runtime_put_autosuspend()
soundwire: Switch to __pm_runtime_put_autosuspend()
spi: Switch to __pm_runtime_put_autosuspend()
staging: Switch to __pm_runtime_put_autosuspend()
thunderbolt: Switch to __pm_runtime_put_autosuspend()
serial: Switch to __pm_runtime_put_autosuspend()
usb: Switch to __pm_runtime_put_autosuspend()
w1: omap-hdq: Switch to __pm_runtime_put_autosuspend()
staging: greybus: Switch to __pm_runtime_put_autosuspend()
ALSA: hda: Switch to __pm_runtime_put_autosuspend()
ASoC: Switch to __pm_runtime_put_autosuspend()
ALSA: intel_hdmi: Switch to __pm_runtime_put_autosuspend()
soc: apple: mailbox: Switch to __pm_runtime_put_autosuspend()
drivers/accel/ivpu/ivpu_drv.c | 2 +-
drivers/accel/ivpu/ivpu_pm.c | 8 +-
drivers/bluetooth/btmtksdio.c | 2 +-
drivers/bluetooth/hci_bcm.c | 6 +-
drivers/bluetooth/hci_h5.c | 4 +-
drivers/bluetooth/hci_intel.c | 6 +-
drivers/bus/sunxi-rsb.c | 4 +-
drivers/char/hw_random/cctrng.c | 2 +-
drivers/char/hw_random/omap3-rom-rng.c | 2 +-
drivers/clk/imx/clk-imx8qxp-lpcg.c | 2 +-
drivers/clk/imx/clk-scu.c | 2 +-
drivers/clk/qcom/lpassaudiocc-sc7280.c | 4 +-
drivers/clk/qcom/lpasscorecc-sc7180.c | 4 +-
drivers/crypto/ccree/cc_pm.c | 2 +-
drivers/crypto/hisilicon/qm.c | 2 +-
drivers/crypto/omap-aes-gcm.c | 2 +-
drivers/crypto/omap-aes.c | 2 +-
drivers/crypto/omap-des.c | 2 +-
drivers/crypto/omap-sham.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 2 +-
.../crypto/rockchip/rk3288_crypto_skcipher.c | 2 +-
drivers/crypto/stm32/stm32-crc32.c | 4 +-
drivers/crypto/stm32/stm32-cryp.c | 2 +-
drivers/crypto/stm32/stm32-hash.c | 2 +-
drivers/dma/at_xdmac.c | 24 +--
drivers/dma/pl330.c | 14 +-
drivers/dma/qcom/bam_dma.c | 10 +-
drivers/dma/qcom/hidma.c | 18 +-
drivers/dma/qcom/hidma_dbg.c | 2 +-
drivers/dma/qcom/hidma_mgmt.c | 4 +-
drivers/dma/ste_dma40.c | 16 +-
drivers/dma/ti/cppi41.c | 10 +-
drivers/dma/xilinx/zynqmp_dma.c | 2 +-
drivers/gpio/gpio-arizona.c | 10 +-
drivers/gpio/gpio-mxc.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 2 +-
.../gpu/drm/amd/amdgpu/amdgpu_connectors.c | 16 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 120 ++++++------
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 6 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 6 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 4 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 4 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_rap.c | 4 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 +-
.../gpu/drm/amd/amdgpu/amdgpu_securedisplay.c | 4 +-
drivers/gpu/drm/amd/amdkfd/kfd_process.c | 4 +-
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +-
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 178 +++++++++---------
.../drm/bridge/analogix/analogix_dp_core.c | 2 +-
drivers/gpu/drm/bridge/analogix/anx7625.c | 4 +-
drivers/gpu/drm/bridge/parade-ps8640.c | 4 +-
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 14 +-
drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 12 +-
drivers/gpu/drm/exynos/exynos_drm_fimc.c | 4 +-
drivers/gpu/drm/exynos/exynos_drm_g2d.c | 4 +-
drivers/gpu/drm/exynos/exynos_drm_gsc.c | 6 +-
drivers/gpu/drm/exynos/exynos_drm_rotator.c | 2 +-
drivers/gpu/drm/exynos/exynos_drm_scaler.c | 2 +-
drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +-
drivers/gpu/drm/imx/dcss/dcss-crtc.c | 2 +-
drivers/gpu/drm/lima/lima_sched.c | 2 +-
drivers/gpu/drm/msm/adreno/adreno_device.c | 2 +-
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +-
drivers/gpu/drm/msm/msm_gpu.c | 2 +-
drivers/gpu/drm/msm/msm_iommu.c | 4 +-
drivers/gpu/drm/msm/msm_submitqueue.c | 2 +-
drivers/gpu/drm/nouveau/dispnv50/disp.c | 10 +-
drivers/gpu/drm/nouveau/nouveau_connector.c | 4 +-
drivers/gpu/drm/nouveau/nouveau_debugfs.c | 8 +-
drivers/gpu/drm/nouveau/nouveau_display.c | 4 +-
drivers/gpu/drm/nouveau/nouveau_drm.c | 10 +-
drivers/gpu/drm/nouveau/nouveau_gem.c | 10 +-
drivers/gpu/drm/panel/panel-edp.c | 8 +-
.../gpu/drm/panel/panel-samsung-atna33xc20.c | 6 +-
drivers/gpu/drm/panel/panel-simple.c | 6 +-
drivers/gpu/drm/panfrost/panfrost_job.c | 4 +-
drivers/gpu/drm/panfrost/panfrost_mmu.c | 4 +-
drivers/gpu/drm/panfrost/panfrost_perfcnt.c | 4 +-
drivers/gpu/drm/panthor/panthor_device.c | 2 +-
drivers/gpu/drm/panthor/panthor_sched.c | 6 +-
drivers/gpu/drm/radeon/radeon_acpi.c | 2 +-
drivers/gpu/drm/radeon/radeon_connectors.c | 20 +-
drivers/gpu/drm/radeon/radeon_display.c | 6 +-
drivers/gpu/drm/radeon/radeon_drv.c | 4 +-
drivers/gpu/drm/radeon/radeon_fbdev.c | 4 +-
drivers/gpu/drm/radeon/radeon_kms.c | 10 +-
drivers/gpu/drm/tegra/submit.c | 2 +-
drivers/gpu/drm/tidss/tidss_drv.c | 2 +-
drivers/gpu/drm/vc4/vc4_v3d.c | 2 +-
drivers/hsi/controllers/omap_ssi_port.c | 42 ++---
drivers/hwtracing/stm/core.c | 8 +-
drivers/i2c/busses/i2c-amd-mp2-pci.c | 2 +-
drivers/i2c/busses/i2c-amd-mp2.h | 2 +-
drivers/i2c/busses/i2c-at91-master.c | 2 +-
drivers/i2c/busses/i2c-cadence.c | 2 +-
drivers/i2c/busses/i2c-davinci.c | 4 +-
drivers/i2c/busses/i2c-designware-master.c | 2 +-
drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +-
drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
drivers/i2c/busses/i2c-i801.c | 4 +-
drivers/i2c/busses/i2c-img-scb.c | 6 +-
drivers/i2c/busses/i2c-imx-lpi2c.c | 6 +-
drivers/i2c/busses/i2c-imx.c | 4 +-
drivers/i2c/busses/i2c-mv64xxx.c | 2 +-
drivers/i2c/busses/i2c-nvidia-gpu.c | 4 +-
drivers/i2c/busses/i2c-omap.c | 6 +-
drivers/i2c/busses/i2c-qcom-cci.c | 2 +-
drivers/i2c/busses/i2c-qcom-geni.c | 2 +-
drivers/i2c/busses/i2c-qup.c | 4 +-
drivers/i2c/busses/i2c-riic.c | 4 +-
drivers/i2c/busses/i2c-rzv2m.c | 2 +-
drivers/i2c/busses/i2c-sprd.c | 4 +-
drivers/i2c/busses/i2c-stm32f7.c | 10 +-
drivers/i2c/busses/i2c-xiic.c | 2 +-
drivers/i3c/master/dw-i3c-master.c | 16 +-
drivers/i3c/master/svc-i3c-master.c | 16 +-
drivers/iio/accel/bmc150-accel-core.c | 2 +-
drivers/iio/accel/bmi088-accel-core.c | 6 +-
drivers/iio/accel/fxls8962af-core.c | 2 +-
drivers/iio/accel/kxcjk-1013.c | 2 +-
drivers/iio/accel/kxsd9.c | 6 +-
drivers/iio/accel/mma8452.c | 2 +-
drivers/iio/accel/mma9551_core.c | 2 +-
drivers/iio/accel/msa311.c | 12 +-
drivers/iio/adc/ab8500-gpadc.c | 2 +-
drivers/iio/adc/at91-sama5d2_adc.c | 20 +-
drivers/iio/adc/rcar-gyroadc.c | 2 +-
drivers/iio/adc/stm32-adc-core.c | 2 +-
drivers/iio/adc/stm32-adc.c | 12 +-
drivers/iio/adc/sun4i-gpadc-iio.c | 4 +-
drivers/iio/adc/ti-ads1015.c | 2 +-
drivers/iio/adc/ti-ads1100.c | 2 +-
drivers/iio/adc/ti-ads1119.c | 4 +-
drivers/iio/chemical/atlas-sensor.c | 4 +-
.../common/hid-sensors/hid-sensor-trigger.c | 2 +-
drivers/iio/dac/stm32-dac.c | 6 +-
drivers/iio/gyro/bmg160_core.c | 2 +-
drivers/iio/gyro/fxas21002c_core.c | 2 +-
drivers/iio/gyro/mpu3050-core.c | 6 +-
drivers/iio/gyro/mpu3050-i2c.c | 2 +-
.../iio/imu/inv_icm42600/inv_icm42600_accel.c | 10 +-
.../imu/inv_icm42600/inv_icm42600_buffer.c | 2 +-
.../iio/imu/inv_icm42600/inv_icm42600_gyro.c | 10 +-
.../iio/imu/inv_icm42600/inv_icm42600_temp.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 14 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 4 +-
drivers/iio/imu/kmx61.c | 2 +-
drivers/iio/light/apds9306.c | 6 +-
drivers/iio/light/apds9960.c | 4 +-
drivers/iio/light/bh1780.c | 2 +-
drivers/iio/light/gp2ap002.c | 4 +-
drivers/iio/light/isl29028.c | 2 +-
drivers/iio/light/ltrf216a.c | 2 +-
drivers/iio/light/pa12203001.c | 2 +-
drivers/iio/light/rpr0521.c | 2 +-
drivers/iio/light/tsl2583.c | 2 +-
drivers/iio/light/tsl2591.c | 4 +-
drivers/iio/light/us5182d.c | 2 +-
drivers/iio/light/vcnl4000.c | 2 +-
drivers/iio/light/vcnl4035.c | 2 +-
drivers/iio/magnetometer/af8133j.c | 4 +-
drivers/iio/magnetometer/ak8974.c | 4 +-
drivers/iio/magnetometer/ak8975.c | 2 +-
drivers/iio/magnetometer/bmc150_magn.c | 2 +-
drivers/iio/magnetometer/tmag5273.c | 4 +-
drivers/iio/magnetometer/yamaha-yas530.c | 4 +-
drivers/iio/pressure/bmp280-core.c | 10 +-
drivers/iio/pressure/icp10100.c | 2 +-
drivers/iio/pressure/mpl115.c | 4 +-
drivers/iio/pressure/zpa2326.c | 4 +-
.../iio/proximity/pulsedlight-lidar-lite-v2.c | 2 +-
drivers/iio/proximity/srf04.c | 2 +-
drivers/iio/temperature/mlx90614.c | 4 +-
drivers/iio/temperature/mlx90632.c | 4 +-
drivers/iio/temperature/mlx90635.c | 4 +-
drivers/input/keyboard/omap4-keypad.c | 8 +-
drivers/input/misc/cs40l50-vibra.c | 8 +-
drivers/iommu/arm/arm-smmu/arm-smmu.c | 2 +-
drivers/irqchip/irq-imx-irqsteer.c | 2 +-
drivers/mailbox/mtk-cmdq-mailbox.c | 10 +-
drivers/media/i2c/alvium-csi2.c | 2 +-
drivers/media/i2c/ccs/ccs-core.c | 10 +-
drivers/media/i2c/dw9719.c | 2 +-
drivers/media/i2c/gc0308.c | 6 +-
drivers/media/i2c/gc2145.c | 8 +-
drivers/media/i2c/imx283.c | 6 +-
drivers/media/i2c/imx290.c | 6 +-
drivers/media/i2c/imx296.c | 4 +-
drivers/media/i2c/imx415.c | 4 +-
drivers/media/i2c/mt9m114.c | 12 +-
drivers/media/i2c/ov2680.c | 2 +-
drivers/media/i2c/ov4689.c | 6 +-
drivers/media/i2c/ov5640.c | 8 +-
drivers/media/i2c/ov5645.c | 6 +-
drivers/media/i2c/ov5693.c | 2 +-
drivers/media/i2c/ov64a40.c | 8 +-
drivers/media/i2c/ov7251.c | 2 +-
drivers/media/i2c/ov8858.c | 4 +-
drivers/media/i2c/thp7312.c | 8 +-
drivers/media/i2c/video-i2c.c | 8 +-
.../media/platform/nvidia/tegra-vde/h264.c | 4 +-
drivers/media/platform/qcom/venus/vdec.c | 4 +-
drivers/media/platform/qcom/venus/venc.c | 4 +-
.../platform/raspberrypi/pisp_be/pisp_be.c | 4 +-
.../media/platform/st/sti/delta/delta-v4l2.c | 4 +-
drivers/media/platform/st/sti/hva/hva-hw.c | 8 +-
.../media/platform/verisilicon/hantro_drv.c | 2 +-
drivers/media/rc/gpio-ir-recv.c | 2 +-
drivers/mfd/arizona-irq.c | 2 +-
drivers/mfd/cs40l50-core.c | 2 +-
drivers/mfd/cs42l43.c | 2 +-
drivers/misc/mei/client.c | 14 +-
drivers/mmc/core/core.c | 4 +-
drivers/mmc/host/atmel-mci.c | 4 +-
drivers/mmc/host/dw_mmc-rockchip.c | 2 +-
drivers/mmc/host/dw_mmc.c | 2 +-
drivers/mmc/host/mmci.c | 2 +-
drivers/mmc/host/omap_hsmmc.c | 6 +-
drivers/mmc/host/sdhci-msm.c | 2 +-
drivers/mmc/host/sdhci-of-at91.c | 2 +-
drivers/mmc/host/sdhci-omap.c | 4 +-
drivers/mmc/host/sdhci-pci-core.c | 2 +-
drivers/mmc/host/sdhci-pxav3.c | 6 +-
drivers/mmc/host/sdhci-sprd.c | 2 +-
drivers/mmc/host/sdhci-xenon.c | 2 +-
drivers/mmc/host/sdhci_am654.c | 2 +-
drivers/mmc/host/tmio_mmc_core.c | 2 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 10 +-
drivers/net/ethernet/cadence/macb_main.c | 10 +-
drivers/net/ethernet/freescale/fec_main.c | 16 +-
drivers/net/ethernet/renesas/ravb_main.c | 8 +-
drivers/net/ethernet/ti/davinci_mdio.c | 14 +-
drivers/net/ipa/ipa_interrupt.c | 2 +-
drivers/net/ipa/ipa_main.c | 2 +-
drivers/net/ipa/ipa_modem.c | 8 +-
drivers/net/ipa/ipa_smp2p.c | 4 +-
drivers/net/ipa/ipa_uc.c | 4 +-
drivers/net/wireless/ath/wil6210/pm.c | 2 +-
drivers/net/wireless/ti/wl18xx/debugfs.c | 6 +-
drivers/net/wireless/ti/wlcore/cmd.c | 2 +-
drivers/net/wireless/ti/wlcore/debugfs.c | 22 +--
drivers/net/wireless/ti/wlcore/main.c | 72 +++----
drivers/net/wireless/ti/wlcore/scan.c | 2 +-
drivers/net/wireless/ti/wlcore/sysfs.c | 2 +-
drivers/net/wireless/ti/wlcore/testmode.c | 4 +-
drivers/net/wireless/ti/wlcore/tx.c | 2 +-
drivers/net/wireless/ti/wlcore/vendor_cmd.c | 6 +-
drivers/net/wwan/qcom_bam_dmux.c | 4 +-
drivers/net/wwan/t7xx/t7xx_hif_cldma.c | 6 +-
drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c | 6 +-
drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c | 4 +-
drivers/nfc/trf7970a.c | 2 +-
drivers/pci/pcie/portdrv.c | 2 +-
drivers/phy/motorola/phy-mapphone-mdm6600.c | 4 +-
drivers/phy/ti/phy-twl4030-usb.c | 8 +-
drivers/power/supply/bq24190_charger.c | 28 +--
drivers/power/supply/twl4030_charger.c | 2 +-
drivers/pwm/pwm-img.c | 4 +-
drivers/regulator/stm32-vrefbuf.c | 12 +-
drivers/remoteproc/omap_remoteproc.c | 6 +-
drivers/slimbus/core.c | 2 +-
drivers/slimbus/messaging.c | 4 +-
drivers/soc/apple/mailbox.c | 2 +-
drivers/soundwire/bus.c | 2 +-
drivers/soundwire/cadence_master.c | 2 +-
drivers/soundwire/qcom.c | 6 +-
drivers/spi/atmel-quadspi.c | 10 +-
drivers/spi/spi-cadence-quadspi.c | 4 +-
drivers/spi/spi-cadence.c | 2 +-
drivers/spi/spi-dw-pci.c | 2 +-
drivers/spi/spi-fsl-espi.c | 4 +-
drivers/spi/spi-fsl-lpspi.c | 4 +-
drivers/spi/spi-imx.c | 6 +-
drivers/spi/spi-mtk-nor.c | 2 +-
drivers/spi/spi-omap2-mcspi.c | 6 +-
drivers/spi/spi-pxa2xx-pci.c | 2 +-
drivers/spi/spi-s3c64xx.c | 6 +-
drivers/spi/spi-sprd.c | 2 +-
drivers/spi/spi-stm32-qspi.c | 14 +-
drivers/spi/spi-stm32.c | 4 +-
drivers/spi/spi-ti-qspi.c | 4 +-
drivers/spi/spi-zynqmp-gqspi.c | 2 +-
drivers/spi/spi.c | 6 +-
drivers/staging/greybus/gbphy.h | 2 +-
drivers/staging/media/rkvdec/rkvdec.c | 2 +-
drivers/thunderbolt/debugfs.c | 22 +--
drivers/thunderbolt/domain.c | 4 +-
drivers/thunderbolt/icm.c | 14 +-
drivers/thunderbolt/nhi.c | 2 +-
drivers/thunderbolt/retimer.c | 4 +-
drivers/thunderbolt/switch.c | 6 +-
drivers/thunderbolt/tb.c | 18 +-
drivers/thunderbolt/usb4_port.c | 4 +-
drivers/tty/serial/8250/8250_omap.c | 18 +-
drivers/tty/serial/8250/8250_port.c | 4 +-
drivers/tty/serial/fsl_lpuart.c | 2 +-
drivers/tty/serial/serial_core.c | 2 +-
drivers/tty/serial/uartlite.c | 4 +-
drivers/tty/serial/xilinx_uartps.c | 2 +-
drivers/usb/cdns3/cdns3-gadget.c | 2 +-
drivers/usb/cdns3/cdnsp-gadget.c | 2 +-
drivers/usb/chipidea/core.c | 2 +-
drivers/usb/chipidea/otg_fsm.c | 2 +-
drivers/usb/dwc3/core.c | 2 +-
drivers/usb/dwc3/dwc3-am62.c | 2 +-
drivers/usb/dwc3/dwc3-imx8mp.c | 2 +-
drivers/usb/gadget/udc/cdns2/cdns2-gadget.c | 2 +-
drivers/usb/host/xhci-mtk.c | 2 +-
drivers/usb/misc/apple-mfi-fastcharge.c | 2 +-
drivers/usb/mtu3/mtu3_plat.c | 2 +-
drivers/usb/musb/musb_core.c | 10 +-
drivers/usb/musb/musb_debugfs.c | 10 +-
drivers/usb/musb/musb_dsps.c | 2 +-
drivers/usb/musb/musb_gadget.c | 8 +-
drivers/usb/musb/omap2430.c | 2 +-
drivers/w1/masters/omap_hdq.c | 10 +-
include/linux/greybus/bundle.h | 2 +-
sound/hda/hdac_device.c | 2 +-
sound/pci/hda/cs35l41_hda.c | 8 +-
sound/pci/hda/cs35l56_hda.c | 2 +-
sound/pci/hda/hda_intel.c | 2 +-
sound/pci/hda/tas2781_hda_i2c.c | 6 +-
sound/soc/atmel/mchp-spdifrx.c | 12 +-
sound/soc/codecs/arizona-jack.c | 12 +-
sound/soc/codecs/arizona.c | 2 +-
sound/soc/codecs/cs35l41.c | 4 +-
sound/soc/codecs/cs35l45.c | 2 +-
sound/soc/codecs/cs35l56-sdw.c | 4 +-
sound/soc/codecs/cs35l56-shared.c | 2 +-
sound/soc/codecs/cs35l56.c | 2 +-
sound/soc/codecs/cs42l42-sdw.c | 2 +-
sound/soc/codecs/cs42l42.c | 4 +-
sound/soc/codecs/cs42l43-jack.c | 10 +-
sound/soc/codecs/cs42l43.c | 4 +-
sound/soc/codecs/hda.c | 6 +-
sound/soc/codecs/madera.c | 6 +-
sound/soc/codecs/max98363.c | 2 +-
sound/soc/codecs/max98373-sdw.c | 2 +-
sound/soc/codecs/rt1017-sdca-sdw.c | 2 +-
sound/soc/codecs/rt1308-sdw.c | 2 +-
sound/soc/codecs/rt1316-sdw.c | 2 +-
sound/soc/codecs/rt1318-sdw.c | 2 +-
sound/soc/codecs/rt1320-sdw.c | 2 +-
sound/soc/codecs/rt5682-sdw.c | 2 +-
sound/soc/codecs/rt700.c | 4 +-
sound/soc/codecs/rt711-sdca.c | 4 +-
sound/soc/codecs/rt711.c | 4 +-
sound/soc/codecs/rt712-sdca-dmic.c | 2 +-
sound/soc/codecs/rt712-sdca.c | 4 +-
sound/soc/codecs/rt715-sdca.c | 2 +-
sound/soc/codecs/rt715.c | 2 +-
sound/soc/codecs/rt722-sdca.c | 4 +-
sound/soc/codecs/wcd-mbhc-v2.c | 4 +-
sound/soc/codecs/wsa881x.c | 2 +-
sound/soc/codecs/wsa884x.c | 2 +-
sound/soc/intel/atom/sst/sst_pvt.c | 2 +-
sound/soc/intel/avs/core.c | 2 +-
sound/soc/intel/avs/debugfs.c | 4 +-
sound/soc/intel/avs/pcm.c | 2 +-
sound/soc/intel/catpt/pcm.c | 12 +-
sound/soc/intel/catpt/sysfs.c | 2 +-
sound/soc/soc-component.c | 2 +-
sound/soc/sof/control.c | 2 +-
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/ipc3-dtrace.c | 2 +-
sound/soc/sof/ipc4-loader.c | 2 +-
sound/soc/sof/pcm.c | 2 +-
sound/soc/sof/sof-client-ipc-flood-test.c | 2 +-
.../soc/sof/sof-client-ipc-kernel-injector.c | 2 +-
sound/soc/sof/sof-client-ipc-msg-injector.c | 2 +-
sound/soc/sof/sof-client-probes.c | 6 +-
sound/x86/intel_hdmi_audio.c | 6 +-
373 files changed, 1076 insertions(+), 1076 deletions(-)
--
2.39.5
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 06/51] crypto: Switch to __pm_runtime_put_autosuspend()
2024-10-04 9:41 [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend() Sakari Ailus
@ 2024-10-04 9:41 ` Sakari Ailus
2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
1 sibling, 0 replies; 13+ messages in thread
From: Sakari Ailus @ 2024-10-04 9:41 UTC (permalink / raw)
To: Herbert Xu, David S. Miller; +Cc: linux-crypto
pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/crypto/ccree/cc_pm.c | 2 +-
drivers/crypto/hisilicon/qm.c | 2 +-
drivers/crypto/omap-aes-gcm.c | 2 +-
drivers/crypto/omap-aes.c | 2 +-
drivers/crypto/omap-des.c | 2 +-
drivers/crypto/omap-sham.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 2 +-
drivers/crypto/stm32/stm32-crc32.c | 4 ++--
drivers/crypto/stm32/stm32-cryp.c | 2 +-
drivers/crypto/stm32/stm32-hash.c | 2 +-
11 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/crypto/ccree/cc_pm.c b/drivers/crypto/ccree/cc_pm.c
index 6124fbbbed94..e4b7eab2e143 100644
--- a/drivers/crypto/ccree/cc_pm.c
+++ b/drivers/crypto/ccree/cc_pm.c
@@ -78,5 +78,5 @@ int cc_pm_get(struct device *dev)
void cc_pm_put_suspend(struct device *dev)
{
pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
+ __pm_runtime_put_autosuspend(dev);
}
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 07983af9e3e2..13408c43fa20 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -840,7 +840,7 @@ static void qm_pm_put_sync(struct hisi_qm *qm)
return;
pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
+ __pm_runtime_put_autosuspend(dev);
}
static void qm_cq_head_update(struct hisi_qp *qp)
diff --git a/drivers/crypto/omap-aes-gcm.c b/drivers/crypto/omap-aes-gcm.c
index c498950402e8..a5566268d928 100644
--- a/drivers/crypto/omap-aes-gcm.c
+++ b/drivers/crypto/omap-aes-gcm.c
@@ -39,7 +39,7 @@ static void omap_aes_gcm_finish_req(struct omap_aes_dev *dd, int ret)
crypto_finalize_aead_request(dd->engine, req, ret);
pm_runtime_mark_last_busy(dd->dev);
- pm_runtime_put_autosuspend(dd->dev);
+ __pm_runtime_put_autosuspend(dd->dev);
}
static void omap_aes_gcm_done_task(struct omap_aes_dev *dd)
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index bad1adacbc84..bf0d953b8697 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -402,7 +402,7 @@ static void omap_aes_finish_req(struct omap_aes_dev *dd, int err)
crypto_finalize_skcipher_request(dd->engine, req, err);
pm_runtime_mark_last_busy(dd->dev);
- pm_runtime_put_autosuspend(dd->dev);
+ __pm_runtime_put_autosuspend(dd->dev);
}
int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd)
diff --git a/drivers/crypto/omap-des.c b/drivers/crypto/omap-des.c
index 209d3dc03a9b..156ef345e7fe 100644
--- a/drivers/crypto/omap-des.c
+++ b/drivers/crypto/omap-des.c
@@ -493,7 +493,7 @@ static void omap_des_finish_req(struct omap_des_dev *dd, int err)
crypto_finalize_skcipher_request(dd->engine, req, err);
pm_runtime_mark_last_busy(dd->dev);
- pm_runtime_put_autosuspend(dd->dev);
+ __pm_runtime_put_autosuspend(dd->dev);
}
static int omap_des_crypt_dma_stop(struct omap_des_dev *dd)
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 5bcd9ab0f72a..6b36a1abd371 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -1168,7 +1168,7 @@ static void omap_sham_finish_req(struct ahash_request *req, int err)
BIT(FLAGS_DMA_READY) | BIT(FLAGS_OUTPUT_READY));
pm_runtime_mark_last_busy(dd->dev);
- pm_runtime_put_autosuspend(dd->dev);
+ __pm_runtime_put_autosuspend(dd->dev);
ctx->offset = 0;
diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
index 69d6019d8abc..0c9e1a7ee429 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -330,7 +330,7 @@ static int rk_hash_run(struct crypto_engine *engine, void *breq)
}
theend:
- pm_runtime_put_autosuspend(rkc->dev);
+ __pm_runtime_put_autosuspend(rkc->dev);
rk_hash_unprepare(engine, breq);
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index 9393e10671c2..8ed80ab982ed 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -413,7 +413,7 @@ static int rk_cipher_run(struct crypto_engine *engine, void *async_req)
}
theend:
- pm_runtime_put_autosuspend(rkc->dev);
+ __pm_runtime_put_autosuspend(rkc->dev);
local_bh_disable();
crypto_finalize_skcipher_request(engine, areq, err);
diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index e0faddbf8990..366f8ed11b7f 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -139,7 +139,7 @@ static int stm32_crc_init(struct shash_desc *desc)
spin_unlock_irqrestore(&crc->lock, flags);
pm_runtime_mark_last_busy(crc->dev);
- pm_runtime_put_autosuspend(crc->dev);
+ __pm_runtime_put_autosuspend(crc->dev);
return 0;
}
@@ -209,7 +209,7 @@ static int burst_update(struct shash_desc *desc, const u8 *d8,
pm_out:
pm_runtime_mark_last_busy(crc->dev);
- pm_runtime_put_autosuspend(crc->dev);
+ __pm_runtime_put_autosuspend(crc->dev);
return 0;
}
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 937f6dab8955..c4f926925f03 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -852,7 +852,7 @@ static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err)
stm32_cryp_get_iv(cryp);
pm_runtime_mark_last_busy(cryp->dev);
- pm_runtime_put_autosuspend(cryp->dev);
+ __pm_runtime_put_autosuspend(cryp->dev);
if (is_gcm(cryp) || is_ccm(cryp))
crypto_finalize_aead_request(cryp->engine, cryp->areq, err);
diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index 351827372ea6..0d4b8a491620 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -1374,7 +1374,7 @@ static void stm32_hash_unprepare_request(struct ahash_request *req)
pm_runtime:
pm_runtime_mark_last_busy(hdev->dev);
- pm_runtime_put_autosuspend(hdev->dev);
+ __pm_runtime_put_autosuspend(hdev->dev);
}
static int stm32_hash_enqueue(struct ahash_request *req, unsigned int op)
--
2.39.5
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-04 9:41 [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend() Sakari Ailus
2024-10-04 9:41 ` [PATCH 06/51] crypto: " Sakari Ailus
@ 2024-10-04 14:38 ` Ulf Hansson
2024-10-07 18:49 ` Laurent Pinchart
1 sibling, 1 reply; 13+ messages in thread
From: Ulf Hansson @ 2024-10-04 14:38 UTC (permalink / raw)
To: Sakari Ailus
Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
laurent.pinchart, rafael, Andy Shevchenko
On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
>
> Hello everyone,
>
> This set will switch the users of pm_runtime_put_autosuspend() to
> __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> to include a call to pm_runtime_mark_last_busy(). The two are almost
> always used together, apart from bugs which are likely common. Going
> forward, most new users should be using pm_runtime_put_autosuspend().
>
> Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> and pm_runtime_mark_last_busy().
That sounds like it could cause a lot of churns.
Why not add a new helper function that does the
pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
things? Then we can start moving users over to this new interface,
rather than having this intermediate step?
Kind regards
Uffe
>
> The diff in these patches have been generated using the following
> Coccinelle script (besides a manual change in
> drivers/iio/magnetometer/af8133j.c):
>
> ----------8<-------------------
> @@
> expression E1;
>
> @@
>
> - pm_runtime_put_autosuspend(E1)
> + __pm_runtime_put_autosuspend(E1)
> ----------8<-------------------
>
> These patches are on top of today's linux-next (i.e. next-20241004).
>
> Sakari Ailus (51):
> accel/ivpu: Switch to __pm_runtime_put_autosuspend()
> bluetooth: Switch to __pm_runtime_put_autosuspend()
> bus: sunxi-rsb: Switch to __pm_runtime_put_autosuspend()
> hwrng: Switch to __pm_runtime_put_autosuspend()
> clk: Switch to __pm_runtime_put_autosuspend()
> crypto: Switch to __pm_runtime_put_autosuspend()
> dmaengine: Switch to __pm_runtime_put_autosuspend()
> gpio: Switch to __pm_runtime_put_autosuspend()
> drm/amd: Switch to __pm_runtime_put_autosuspend()
> drm/nouveau: Switch to __pm_runtime_put_autosuspend()
> drm/radeon: Switch to __pm_runtime_put_autosuspend()
> drm/panfrost: Switch to __pm_runtime_put_autosuspend()
> drivers: drm: Switch to __pm_runtime_put_autosuspend()
> HSI: omap_ssi_port: Switch to __pm_runtime_put_autosuspend()
> stm class: Switch to __pm_runtime_put_autosuspend()
> i2c: Switch to __pm_runtime_put_autosuspend()
> i3c: master: svc: Switch to __pm_runtime_put_autosuspend()
> i3c: dw: Switch to __pm_runtime_put_autosuspend()
> iio: Switch to __pm_runtime_put_autosuspend()
> Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
> Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
> iommu/arm-smmu: Switch to __pm_runtime_put_autosuspend()
> irqchip/imx-irqsteer: Switch to __pm_runtime_put_autosuspend()
> mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
> media: Switch to __pm_runtime_put_autosuspend()
> mfd: Switch to __pm_runtime_put_autosuspend()
> mei: Switch to __pm_runtime_put_autosuspend()
> mmc: Switch to __pm_runtime_put_autosuspend()
> mtd: rawnand: gpmi: Switch to __pm_runtime_put_autosuspend()
> net: Switch to __pm_runtime_put_autosuspend()
> nfc: trf7970a: Switch to __pm_runtime_put_autosuspend()
> PCI/portdrv: Switch to __pm_runtime_put_autosuspend()
> phy: motorola: phy-mapphone-mdm6600: Switch to
> __pm_runtime_put_autosuspend()
> phy: ti: phy-twl4030-usb: Switch to __pm_runtime_put_autosuspend()
> power: Switch to __pm_runtime_put_autosuspend()
> pwm: img: Switch to __pm_runtime_put_autosuspend()
> regulator: stm32-vrefbuf: Switch to __pm_runtime_put_autosuspend()
> remoteproc: omap: Switch to __pm_runtime_put_autosuspend()
> slimbus: Switch to __pm_runtime_put_autosuspend()
> soundwire: Switch to __pm_runtime_put_autosuspend()
> spi: Switch to __pm_runtime_put_autosuspend()
> staging: Switch to __pm_runtime_put_autosuspend()
> thunderbolt: Switch to __pm_runtime_put_autosuspend()
> serial: Switch to __pm_runtime_put_autosuspend()
> usb: Switch to __pm_runtime_put_autosuspend()
> w1: omap-hdq: Switch to __pm_runtime_put_autosuspend()
> staging: greybus: Switch to __pm_runtime_put_autosuspend()
> ALSA: hda: Switch to __pm_runtime_put_autosuspend()
> ASoC: Switch to __pm_runtime_put_autosuspend()
> ALSA: intel_hdmi: Switch to __pm_runtime_put_autosuspend()
> soc: apple: mailbox: Switch to __pm_runtime_put_autosuspend()
>
> drivers/accel/ivpu/ivpu_drv.c | 2 +-
> drivers/accel/ivpu/ivpu_pm.c | 8 +-
> drivers/bluetooth/btmtksdio.c | 2 +-
> drivers/bluetooth/hci_bcm.c | 6 +-
> drivers/bluetooth/hci_h5.c | 4 +-
> drivers/bluetooth/hci_intel.c | 6 +-
> drivers/bus/sunxi-rsb.c | 4 +-
> drivers/char/hw_random/cctrng.c | 2 +-
> drivers/char/hw_random/omap3-rom-rng.c | 2 +-
> drivers/clk/imx/clk-imx8qxp-lpcg.c | 2 +-
> drivers/clk/imx/clk-scu.c | 2 +-
> drivers/clk/qcom/lpassaudiocc-sc7280.c | 4 +-
> drivers/clk/qcom/lpasscorecc-sc7180.c | 4 +-
> drivers/crypto/ccree/cc_pm.c | 2 +-
> drivers/crypto/hisilicon/qm.c | 2 +-
> drivers/crypto/omap-aes-gcm.c | 2 +-
> drivers/crypto/omap-aes.c | 2 +-
> drivers/crypto/omap-des.c | 2 +-
> drivers/crypto/omap-sham.c | 2 +-
> drivers/crypto/rockchip/rk3288_crypto_ahash.c | 2 +-
> .../crypto/rockchip/rk3288_crypto_skcipher.c | 2 +-
> drivers/crypto/stm32/stm32-crc32.c | 4 +-
> drivers/crypto/stm32/stm32-cryp.c | 2 +-
> drivers/crypto/stm32/stm32-hash.c | 2 +-
> drivers/dma/at_xdmac.c | 24 +--
> drivers/dma/pl330.c | 14 +-
> drivers/dma/qcom/bam_dma.c | 10 +-
> drivers/dma/qcom/hidma.c | 18 +-
> drivers/dma/qcom/hidma_dbg.c | 2 +-
> drivers/dma/qcom/hidma_mgmt.c | 4 +-
> drivers/dma/ste_dma40.c | 16 +-
> drivers/dma/ti/cppi41.c | 10 +-
> drivers/dma/xilinx/zynqmp_dma.c | 2 +-
> drivers/gpio/gpio-arizona.c | 10 +-
> drivers/gpio/gpio-mxc.c | 2 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 2 +-
> .../gpu/drm/amd/amdgpu/amdgpu_connectors.c | 16 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 120 ++++++------
> drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 6 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 6 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 4 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 4 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_rap.c | 4 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 +-
> .../gpu/drm/amd/amdgpu/amdgpu_securedisplay.c | 4 +-
> drivers/gpu/drm/amd/amdkfd/kfd_process.c | 4 +-
> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +-
> drivers/gpu/drm/amd/pm/amdgpu_pm.c | 178 +++++++++---------
> .../drm/bridge/analogix/analogix_dp_core.c | 2 +-
> drivers/gpu/drm/bridge/analogix/anx7625.c | 4 +-
> drivers/gpu/drm/bridge/parade-ps8640.c | 4 +-
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 14 +-
> drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 12 +-
> drivers/gpu/drm/exynos/exynos_drm_fimc.c | 4 +-
> drivers/gpu/drm/exynos/exynos_drm_g2d.c | 4 +-
> drivers/gpu/drm/exynos/exynos_drm_gsc.c | 6 +-
> drivers/gpu/drm/exynos/exynos_drm_rotator.c | 2 +-
> drivers/gpu/drm/exynos/exynos_drm_scaler.c | 2 +-
> drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +-
> drivers/gpu/drm/imx/dcss/dcss-crtc.c | 2 +-
> drivers/gpu/drm/lima/lima_sched.c | 2 +-
> drivers/gpu/drm/msm/adreno/adreno_device.c | 2 +-
> drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +-
> drivers/gpu/drm/msm/msm_gpu.c | 2 +-
> drivers/gpu/drm/msm/msm_iommu.c | 4 +-
> drivers/gpu/drm/msm/msm_submitqueue.c | 2 +-
> drivers/gpu/drm/nouveau/dispnv50/disp.c | 10 +-
> drivers/gpu/drm/nouveau/nouveau_connector.c | 4 +-
> drivers/gpu/drm/nouveau/nouveau_debugfs.c | 8 +-
> drivers/gpu/drm/nouveau/nouveau_display.c | 4 +-
> drivers/gpu/drm/nouveau/nouveau_drm.c | 10 +-
> drivers/gpu/drm/nouveau/nouveau_gem.c | 10 +-
> drivers/gpu/drm/panel/panel-edp.c | 8 +-
> .../gpu/drm/panel/panel-samsung-atna33xc20.c | 6 +-
> drivers/gpu/drm/panel/panel-simple.c | 6 +-
> drivers/gpu/drm/panfrost/panfrost_job.c | 4 +-
> drivers/gpu/drm/panfrost/panfrost_mmu.c | 4 +-
> drivers/gpu/drm/panfrost/panfrost_perfcnt.c | 4 +-
> drivers/gpu/drm/panthor/panthor_device.c | 2 +-
> drivers/gpu/drm/panthor/panthor_sched.c | 6 +-
> drivers/gpu/drm/radeon/radeon_acpi.c | 2 +-
> drivers/gpu/drm/radeon/radeon_connectors.c | 20 +-
> drivers/gpu/drm/radeon/radeon_display.c | 6 +-
> drivers/gpu/drm/radeon/radeon_drv.c | 4 +-
> drivers/gpu/drm/radeon/radeon_fbdev.c | 4 +-
> drivers/gpu/drm/radeon/radeon_kms.c | 10 +-
> drivers/gpu/drm/tegra/submit.c | 2 +-
> drivers/gpu/drm/tidss/tidss_drv.c | 2 +-
> drivers/gpu/drm/vc4/vc4_v3d.c | 2 +-
> drivers/hsi/controllers/omap_ssi_port.c | 42 ++---
> drivers/hwtracing/stm/core.c | 8 +-
> drivers/i2c/busses/i2c-amd-mp2-pci.c | 2 +-
> drivers/i2c/busses/i2c-amd-mp2.h | 2 +-
> drivers/i2c/busses/i2c-at91-master.c | 2 +-
> drivers/i2c/busses/i2c-cadence.c | 2 +-
> drivers/i2c/busses/i2c-davinci.c | 4 +-
> drivers/i2c/busses/i2c-designware-master.c | 2 +-
> drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +-
> drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
> drivers/i2c/busses/i2c-i801.c | 4 +-
> drivers/i2c/busses/i2c-img-scb.c | 6 +-
> drivers/i2c/busses/i2c-imx-lpi2c.c | 6 +-
> drivers/i2c/busses/i2c-imx.c | 4 +-
> drivers/i2c/busses/i2c-mv64xxx.c | 2 +-
> drivers/i2c/busses/i2c-nvidia-gpu.c | 4 +-
> drivers/i2c/busses/i2c-omap.c | 6 +-
> drivers/i2c/busses/i2c-qcom-cci.c | 2 +-
> drivers/i2c/busses/i2c-qcom-geni.c | 2 +-
> drivers/i2c/busses/i2c-qup.c | 4 +-
> drivers/i2c/busses/i2c-riic.c | 4 +-
> drivers/i2c/busses/i2c-rzv2m.c | 2 +-
> drivers/i2c/busses/i2c-sprd.c | 4 +-
> drivers/i2c/busses/i2c-stm32f7.c | 10 +-
> drivers/i2c/busses/i2c-xiic.c | 2 +-
> drivers/i3c/master/dw-i3c-master.c | 16 +-
> drivers/i3c/master/svc-i3c-master.c | 16 +-
> drivers/iio/accel/bmc150-accel-core.c | 2 +-
> drivers/iio/accel/bmi088-accel-core.c | 6 +-
> drivers/iio/accel/fxls8962af-core.c | 2 +-
> drivers/iio/accel/kxcjk-1013.c | 2 +-
> drivers/iio/accel/kxsd9.c | 6 +-
> drivers/iio/accel/mma8452.c | 2 +-
> drivers/iio/accel/mma9551_core.c | 2 +-
> drivers/iio/accel/msa311.c | 12 +-
> drivers/iio/adc/ab8500-gpadc.c | 2 +-
> drivers/iio/adc/at91-sama5d2_adc.c | 20 +-
> drivers/iio/adc/rcar-gyroadc.c | 2 +-
> drivers/iio/adc/stm32-adc-core.c | 2 +-
> drivers/iio/adc/stm32-adc.c | 12 +-
> drivers/iio/adc/sun4i-gpadc-iio.c | 4 +-
> drivers/iio/adc/ti-ads1015.c | 2 +-
> drivers/iio/adc/ti-ads1100.c | 2 +-
> drivers/iio/adc/ti-ads1119.c | 4 +-
> drivers/iio/chemical/atlas-sensor.c | 4 +-
> .../common/hid-sensors/hid-sensor-trigger.c | 2 +-
> drivers/iio/dac/stm32-dac.c | 6 +-
> drivers/iio/gyro/bmg160_core.c | 2 +-
> drivers/iio/gyro/fxas21002c_core.c | 2 +-
> drivers/iio/gyro/mpu3050-core.c | 6 +-
> drivers/iio/gyro/mpu3050-i2c.c | 2 +-
> .../iio/imu/inv_icm42600/inv_icm42600_accel.c | 10 +-
> .../imu/inv_icm42600/inv_icm42600_buffer.c | 2 +-
> .../iio/imu/inv_icm42600/inv_icm42600_gyro.c | 10 +-
> .../iio/imu/inv_icm42600/inv_icm42600_temp.c | 2 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 14 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 4 +-
> drivers/iio/imu/kmx61.c | 2 +-
> drivers/iio/light/apds9306.c | 6 +-
> drivers/iio/light/apds9960.c | 4 +-
> drivers/iio/light/bh1780.c | 2 +-
> drivers/iio/light/gp2ap002.c | 4 +-
> drivers/iio/light/isl29028.c | 2 +-
> drivers/iio/light/ltrf216a.c | 2 +-
> drivers/iio/light/pa12203001.c | 2 +-
> drivers/iio/light/rpr0521.c | 2 +-
> drivers/iio/light/tsl2583.c | 2 +-
> drivers/iio/light/tsl2591.c | 4 +-
> drivers/iio/light/us5182d.c | 2 +-
> drivers/iio/light/vcnl4000.c | 2 +-
> drivers/iio/light/vcnl4035.c | 2 +-
> drivers/iio/magnetometer/af8133j.c | 4 +-
> drivers/iio/magnetometer/ak8974.c | 4 +-
> drivers/iio/magnetometer/ak8975.c | 2 +-
> drivers/iio/magnetometer/bmc150_magn.c | 2 +-
> drivers/iio/magnetometer/tmag5273.c | 4 +-
> drivers/iio/magnetometer/yamaha-yas530.c | 4 +-
> drivers/iio/pressure/bmp280-core.c | 10 +-
> drivers/iio/pressure/icp10100.c | 2 +-
> drivers/iio/pressure/mpl115.c | 4 +-
> drivers/iio/pressure/zpa2326.c | 4 +-
> .../iio/proximity/pulsedlight-lidar-lite-v2.c | 2 +-
> drivers/iio/proximity/srf04.c | 2 +-
> drivers/iio/temperature/mlx90614.c | 4 +-
> drivers/iio/temperature/mlx90632.c | 4 +-
> drivers/iio/temperature/mlx90635.c | 4 +-
> drivers/input/keyboard/omap4-keypad.c | 8 +-
> drivers/input/misc/cs40l50-vibra.c | 8 +-
> drivers/iommu/arm/arm-smmu/arm-smmu.c | 2 +-
> drivers/irqchip/irq-imx-irqsteer.c | 2 +-
> drivers/mailbox/mtk-cmdq-mailbox.c | 10 +-
> drivers/media/i2c/alvium-csi2.c | 2 +-
> drivers/media/i2c/ccs/ccs-core.c | 10 +-
> drivers/media/i2c/dw9719.c | 2 +-
> drivers/media/i2c/gc0308.c | 6 +-
> drivers/media/i2c/gc2145.c | 8 +-
> drivers/media/i2c/imx283.c | 6 +-
> drivers/media/i2c/imx290.c | 6 +-
> drivers/media/i2c/imx296.c | 4 +-
> drivers/media/i2c/imx415.c | 4 +-
> drivers/media/i2c/mt9m114.c | 12 +-
> drivers/media/i2c/ov2680.c | 2 +-
> drivers/media/i2c/ov4689.c | 6 +-
> drivers/media/i2c/ov5640.c | 8 +-
> drivers/media/i2c/ov5645.c | 6 +-
> drivers/media/i2c/ov5693.c | 2 +-
> drivers/media/i2c/ov64a40.c | 8 +-
> drivers/media/i2c/ov7251.c | 2 +-
> drivers/media/i2c/ov8858.c | 4 +-
> drivers/media/i2c/thp7312.c | 8 +-
> drivers/media/i2c/video-i2c.c | 8 +-
> .../media/platform/nvidia/tegra-vde/h264.c | 4 +-
> drivers/media/platform/qcom/venus/vdec.c | 4 +-
> drivers/media/platform/qcom/venus/venc.c | 4 +-
> .../platform/raspberrypi/pisp_be/pisp_be.c | 4 +-
> .../media/platform/st/sti/delta/delta-v4l2.c | 4 +-
> drivers/media/platform/st/sti/hva/hva-hw.c | 8 +-
> .../media/platform/verisilicon/hantro_drv.c | 2 +-
> drivers/media/rc/gpio-ir-recv.c | 2 +-
> drivers/mfd/arizona-irq.c | 2 +-
> drivers/mfd/cs40l50-core.c | 2 +-
> drivers/mfd/cs42l43.c | 2 +-
> drivers/misc/mei/client.c | 14 +-
> drivers/mmc/core/core.c | 4 +-
> drivers/mmc/host/atmel-mci.c | 4 +-
> drivers/mmc/host/dw_mmc-rockchip.c | 2 +-
> drivers/mmc/host/dw_mmc.c | 2 +-
> drivers/mmc/host/mmci.c | 2 +-
> drivers/mmc/host/omap_hsmmc.c | 6 +-
> drivers/mmc/host/sdhci-msm.c | 2 +-
> drivers/mmc/host/sdhci-of-at91.c | 2 +-
> drivers/mmc/host/sdhci-omap.c | 4 +-
> drivers/mmc/host/sdhci-pci-core.c | 2 +-
> drivers/mmc/host/sdhci-pxav3.c | 6 +-
> drivers/mmc/host/sdhci-sprd.c | 2 +-
> drivers/mmc/host/sdhci-xenon.c | 2 +-
> drivers/mmc/host/sdhci_am654.c | 2 +-
> drivers/mmc/host/tmio_mmc_core.c | 2 +-
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 10 +-
> drivers/net/ethernet/cadence/macb_main.c | 10 +-
> drivers/net/ethernet/freescale/fec_main.c | 16 +-
> drivers/net/ethernet/renesas/ravb_main.c | 8 +-
> drivers/net/ethernet/ti/davinci_mdio.c | 14 +-
> drivers/net/ipa/ipa_interrupt.c | 2 +-
> drivers/net/ipa/ipa_main.c | 2 +-
> drivers/net/ipa/ipa_modem.c | 8 +-
> drivers/net/ipa/ipa_smp2p.c | 4 +-
> drivers/net/ipa/ipa_uc.c | 4 +-
> drivers/net/wireless/ath/wil6210/pm.c | 2 +-
> drivers/net/wireless/ti/wl18xx/debugfs.c | 6 +-
> drivers/net/wireless/ti/wlcore/cmd.c | 2 +-
> drivers/net/wireless/ti/wlcore/debugfs.c | 22 +--
> drivers/net/wireless/ti/wlcore/main.c | 72 +++----
> drivers/net/wireless/ti/wlcore/scan.c | 2 +-
> drivers/net/wireless/ti/wlcore/sysfs.c | 2 +-
> drivers/net/wireless/ti/wlcore/testmode.c | 4 +-
> drivers/net/wireless/ti/wlcore/tx.c | 2 +-
> drivers/net/wireless/ti/wlcore/vendor_cmd.c | 6 +-
> drivers/net/wwan/qcom_bam_dmux.c | 4 +-
> drivers/net/wwan/t7xx/t7xx_hif_cldma.c | 6 +-
> drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c | 6 +-
> drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c | 4 +-
> drivers/nfc/trf7970a.c | 2 +-
> drivers/pci/pcie/portdrv.c | 2 +-
> drivers/phy/motorola/phy-mapphone-mdm6600.c | 4 +-
> drivers/phy/ti/phy-twl4030-usb.c | 8 +-
> drivers/power/supply/bq24190_charger.c | 28 +--
> drivers/power/supply/twl4030_charger.c | 2 +-
> drivers/pwm/pwm-img.c | 4 +-
> drivers/regulator/stm32-vrefbuf.c | 12 +-
> drivers/remoteproc/omap_remoteproc.c | 6 +-
> drivers/slimbus/core.c | 2 +-
> drivers/slimbus/messaging.c | 4 +-
> drivers/soc/apple/mailbox.c | 2 +-
> drivers/soundwire/bus.c | 2 +-
> drivers/soundwire/cadence_master.c | 2 +-
> drivers/soundwire/qcom.c | 6 +-
> drivers/spi/atmel-quadspi.c | 10 +-
> drivers/spi/spi-cadence-quadspi.c | 4 +-
> drivers/spi/spi-cadence.c | 2 +-
> drivers/spi/spi-dw-pci.c | 2 +-
> drivers/spi/spi-fsl-espi.c | 4 +-
> drivers/spi/spi-fsl-lpspi.c | 4 +-
> drivers/spi/spi-imx.c | 6 +-
> drivers/spi/spi-mtk-nor.c | 2 +-
> drivers/spi/spi-omap2-mcspi.c | 6 +-
> drivers/spi/spi-pxa2xx-pci.c | 2 +-
> drivers/spi/spi-s3c64xx.c | 6 +-
> drivers/spi/spi-sprd.c | 2 +-
> drivers/spi/spi-stm32-qspi.c | 14 +-
> drivers/spi/spi-stm32.c | 4 +-
> drivers/spi/spi-ti-qspi.c | 4 +-
> drivers/spi/spi-zynqmp-gqspi.c | 2 +-
> drivers/spi/spi.c | 6 +-
> drivers/staging/greybus/gbphy.h | 2 +-
> drivers/staging/media/rkvdec/rkvdec.c | 2 +-
> drivers/thunderbolt/debugfs.c | 22 +--
> drivers/thunderbolt/domain.c | 4 +-
> drivers/thunderbolt/icm.c | 14 +-
> drivers/thunderbolt/nhi.c | 2 +-
> drivers/thunderbolt/retimer.c | 4 +-
> drivers/thunderbolt/switch.c | 6 +-
> drivers/thunderbolt/tb.c | 18 +-
> drivers/thunderbolt/usb4_port.c | 4 +-
> drivers/tty/serial/8250/8250_omap.c | 18 +-
> drivers/tty/serial/8250/8250_port.c | 4 +-
> drivers/tty/serial/fsl_lpuart.c | 2 +-
> drivers/tty/serial/serial_core.c | 2 +-
> drivers/tty/serial/uartlite.c | 4 +-
> drivers/tty/serial/xilinx_uartps.c | 2 +-
> drivers/usb/cdns3/cdns3-gadget.c | 2 +-
> drivers/usb/cdns3/cdnsp-gadget.c | 2 +-
> drivers/usb/chipidea/core.c | 2 +-
> drivers/usb/chipidea/otg_fsm.c | 2 +-
> drivers/usb/dwc3/core.c | 2 +-
> drivers/usb/dwc3/dwc3-am62.c | 2 +-
> drivers/usb/dwc3/dwc3-imx8mp.c | 2 +-
> drivers/usb/gadget/udc/cdns2/cdns2-gadget.c | 2 +-
> drivers/usb/host/xhci-mtk.c | 2 +-
> drivers/usb/misc/apple-mfi-fastcharge.c | 2 +-
> drivers/usb/mtu3/mtu3_plat.c | 2 +-
> drivers/usb/musb/musb_core.c | 10 +-
> drivers/usb/musb/musb_debugfs.c | 10 +-
> drivers/usb/musb/musb_dsps.c | 2 +-
> drivers/usb/musb/musb_gadget.c | 8 +-
> drivers/usb/musb/omap2430.c | 2 +-
> drivers/w1/masters/omap_hdq.c | 10 +-
> include/linux/greybus/bundle.h | 2 +-
> sound/hda/hdac_device.c | 2 +-
> sound/pci/hda/cs35l41_hda.c | 8 +-
> sound/pci/hda/cs35l56_hda.c | 2 +-
> sound/pci/hda/hda_intel.c | 2 +-
> sound/pci/hda/tas2781_hda_i2c.c | 6 +-
> sound/soc/atmel/mchp-spdifrx.c | 12 +-
> sound/soc/codecs/arizona-jack.c | 12 +-
> sound/soc/codecs/arizona.c | 2 +-
> sound/soc/codecs/cs35l41.c | 4 +-
> sound/soc/codecs/cs35l45.c | 2 +-
> sound/soc/codecs/cs35l56-sdw.c | 4 +-
> sound/soc/codecs/cs35l56-shared.c | 2 +-
> sound/soc/codecs/cs35l56.c | 2 +-
> sound/soc/codecs/cs42l42-sdw.c | 2 +-
> sound/soc/codecs/cs42l42.c | 4 +-
> sound/soc/codecs/cs42l43-jack.c | 10 +-
> sound/soc/codecs/cs42l43.c | 4 +-
> sound/soc/codecs/hda.c | 6 +-
> sound/soc/codecs/madera.c | 6 +-
> sound/soc/codecs/max98363.c | 2 +-
> sound/soc/codecs/max98373-sdw.c | 2 +-
> sound/soc/codecs/rt1017-sdca-sdw.c | 2 +-
> sound/soc/codecs/rt1308-sdw.c | 2 +-
> sound/soc/codecs/rt1316-sdw.c | 2 +-
> sound/soc/codecs/rt1318-sdw.c | 2 +-
> sound/soc/codecs/rt1320-sdw.c | 2 +-
> sound/soc/codecs/rt5682-sdw.c | 2 +-
> sound/soc/codecs/rt700.c | 4 +-
> sound/soc/codecs/rt711-sdca.c | 4 +-
> sound/soc/codecs/rt711.c | 4 +-
> sound/soc/codecs/rt712-sdca-dmic.c | 2 +-
> sound/soc/codecs/rt712-sdca.c | 4 +-
> sound/soc/codecs/rt715-sdca.c | 2 +-
> sound/soc/codecs/rt715.c | 2 +-
> sound/soc/codecs/rt722-sdca.c | 4 +-
> sound/soc/codecs/wcd-mbhc-v2.c | 4 +-
> sound/soc/codecs/wsa881x.c | 2 +-
> sound/soc/codecs/wsa884x.c | 2 +-
> sound/soc/intel/atom/sst/sst_pvt.c | 2 +-
> sound/soc/intel/avs/core.c | 2 +-
> sound/soc/intel/avs/debugfs.c | 4 +-
> sound/soc/intel/avs/pcm.c | 2 +-
> sound/soc/intel/catpt/pcm.c | 12 +-
> sound/soc/intel/catpt/sysfs.c | 2 +-
> sound/soc/soc-component.c | 2 +-
> sound/soc/sof/control.c | 2 +-
> sound/soc/sof/debug.c | 2 +-
> sound/soc/sof/ipc3-dtrace.c | 2 +-
> sound/soc/sof/ipc4-loader.c | 2 +-
> sound/soc/sof/pcm.c | 2 +-
> sound/soc/sof/sof-client-ipc-flood-test.c | 2 +-
> .../soc/sof/sof-client-ipc-kernel-injector.c | 2 +-
> sound/soc/sof/sof-client-ipc-msg-injector.c | 2 +-
> sound/soc/sof/sof-client-probes.c | 6 +-
> sound/x86/intel_hdmi_audio.c | 6 +-
> 373 files changed, 1076 insertions(+), 1076 deletions(-)
>
> --
> 2.39.5
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
@ 2024-10-07 18:49 ` Laurent Pinchart
2024-10-07 22:08 ` Ulf Hansson
2024-10-08 20:38 ` Uwe Kleine-König
0 siblings, 2 replies; 13+ messages in thread
From: Laurent Pinchart @ 2024-10-07 18:49 UTC (permalink / raw)
To: Ulf Hansson
Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
linux-input, patches, iommu, imx, linux-mediatek, linux-media,
linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
rafael, Andy Shevchenko
Hi Ulf,
On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> >
> > Hello everyone,
> >
> > This set will switch the users of pm_runtime_put_autosuspend() to
> > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > always used together, apart from bugs which are likely common. Going
> > forward, most new users should be using pm_runtime_put_autosuspend().
> >
> > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > and pm_runtime_mark_last_busy().
>
> That sounds like it could cause a lot of churns.
>
> Why not add a new helper function that does the
> pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> things? Then we can start moving users over to this new interface,
> rather than having this intermediate step?
I think the API would be nicer if we used the shortest and simplest
function names for the most common use cases. Following
pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
most common use case. That's why I like Sakari's approach of repurposing
pm_runtime_put_autosuspend(), and introducing
__pm_runtime_put_autosuspend() for the odd cases where
pm_runtime_mark_last_busy() shouldn't be called.
> > The diff in these patches have been generated using the following
> > Coccinelle script (besides a manual change in
> > drivers/iio/magnetometer/af8133j.c):
> >
> > ----------8<-------------------
> > @@
> > expression E1;
> >
> > @@
> >
> > - pm_runtime_put_autosuspend(E1)
> > + __pm_runtime_put_autosuspend(E1)
> > ----------8<-------------------
> >
> > These patches are on top of today's linux-next (i.e. next-20241004).
> >
> > Sakari Ailus (51):
> > accel/ivpu: Switch to __pm_runtime_put_autosuspend()
> > bluetooth: Switch to __pm_runtime_put_autosuspend()
> > bus: sunxi-rsb: Switch to __pm_runtime_put_autosuspend()
> > hwrng: Switch to __pm_runtime_put_autosuspend()
> > clk: Switch to __pm_runtime_put_autosuspend()
> > crypto: Switch to __pm_runtime_put_autosuspend()
> > dmaengine: Switch to __pm_runtime_put_autosuspend()
> > gpio: Switch to __pm_runtime_put_autosuspend()
> > drm/amd: Switch to __pm_runtime_put_autosuspend()
> > drm/nouveau: Switch to __pm_runtime_put_autosuspend()
> > drm/radeon: Switch to __pm_runtime_put_autosuspend()
> > drm/panfrost: Switch to __pm_runtime_put_autosuspend()
> > drivers: drm: Switch to __pm_runtime_put_autosuspend()
> > HSI: omap_ssi_port: Switch to __pm_runtime_put_autosuspend()
> > stm class: Switch to __pm_runtime_put_autosuspend()
> > i2c: Switch to __pm_runtime_put_autosuspend()
> > i3c: master: svc: Switch to __pm_runtime_put_autosuspend()
> > i3c: dw: Switch to __pm_runtime_put_autosuspend()
> > iio: Switch to __pm_runtime_put_autosuspend()
> > Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
> > Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
> > iommu/arm-smmu: Switch to __pm_runtime_put_autosuspend()
> > irqchip/imx-irqsteer: Switch to __pm_runtime_put_autosuspend()
> > mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
> > media: Switch to __pm_runtime_put_autosuspend()
> > mfd: Switch to __pm_runtime_put_autosuspend()
> > mei: Switch to __pm_runtime_put_autosuspend()
> > mmc: Switch to __pm_runtime_put_autosuspend()
> > mtd: rawnand: gpmi: Switch to __pm_runtime_put_autosuspend()
> > net: Switch to __pm_runtime_put_autosuspend()
> > nfc: trf7970a: Switch to __pm_runtime_put_autosuspend()
> > PCI/portdrv: Switch to __pm_runtime_put_autosuspend()
> > phy: motorola: phy-mapphone-mdm6600: Switch to
> > __pm_runtime_put_autosuspend()
> > phy: ti: phy-twl4030-usb: Switch to __pm_runtime_put_autosuspend()
> > power: Switch to __pm_runtime_put_autosuspend()
> > pwm: img: Switch to __pm_runtime_put_autosuspend()
> > regulator: stm32-vrefbuf: Switch to __pm_runtime_put_autosuspend()
> > remoteproc: omap: Switch to __pm_runtime_put_autosuspend()
> > slimbus: Switch to __pm_runtime_put_autosuspend()
> > soundwire: Switch to __pm_runtime_put_autosuspend()
> > spi: Switch to __pm_runtime_put_autosuspend()
> > staging: Switch to __pm_runtime_put_autosuspend()
> > thunderbolt: Switch to __pm_runtime_put_autosuspend()
> > serial: Switch to __pm_runtime_put_autosuspend()
> > usb: Switch to __pm_runtime_put_autosuspend()
> > w1: omap-hdq: Switch to __pm_runtime_put_autosuspend()
> > staging: greybus: Switch to __pm_runtime_put_autosuspend()
> > ALSA: hda: Switch to __pm_runtime_put_autosuspend()
> > ASoC: Switch to __pm_runtime_put_autosuspend()
> > ALSA: intel_hdmi: Switch to __pm_runtime_put_autosuspend()
> > soc: apple: mailbox: Switch to __pm_runtime_put_autosuspend()
> >
> > drivers/accel/ivpu/ivpu_drv.c | 2 +-
> > drivers/accel/ivpu/ivpu_pm.c | 8 +-
> > drivers/bluetooth/btmtksdio.c | 2 +-
> > drivers/bluetooth/hci_bcm.c | 6 +-
> > drivers/bluetooth/hci_h5.c | 4 +-
> > drivers/bluetooth/hci_intel.c | 6 +-
> > drivers/bus/sunxi-rsb.c | 4 +-
> > drivers/char/hw_random/cctrng.c | 2 +-
> > drivers/char/hw_random/omap3-rom-rng.c | 2 +-
> > drivers/clk/imx/clk-imx8qxp-lpcg.c | 2 +-
> > drivers/clk/imx/clk-scu.c | 2 +-
> > drivers/clk/qcom/lpassaudiocc-sc7280.c | 4 +-
> > drivers/clk/qcom/lpasscorecc-sc7180.c | 4 +-
> > drivers/crypto/ccree/cc_pm.c | 2 +-
> > drivers/crypto/hisilicon/qm.c | 2 +-
> > drivers/crypto/omap-aes-gcm.c | 2 +-
> > drivers/crypto/omap-aes.c | 2 +-
> > drivers/crypto/omap-des.c | 2 +-
> > drivers/crypto/omap-sham.c | 2 +-
> > drivers/crypto/rockchip/rk3288_crypto_ahash.c | 2 +-
> > .../crypto/rockchip/rk3288_crypto_skcipher.c | 2 +-
> > drivers/crypto/stm32/stm32-crc32.c | 4 +-
> > drivers/crypto/stm32/stm32-cryp.c | 2 +-
> > drivers/crypto/stm32/stm32-hash.c | 2 +-
> > drivers/dma/at_xdmac.c | 24 +--
> > drivers/dma/pl330.c | 14 +-
> > drivers/dma/qcom/bam_dma.c | 10 +-
> > drivers/dma/qcom/hidma.c | 18 +-
> > drivers/dma/qcom/hidma_dbg.c | 2 +-
> > drivers/dma/qcom/hidma_mgmt.c | 4 +-
> > drivers/dma/ste_dma40.c | 16 +-
> > drivers/dma/ti/cppi41.c | 10 +-
> > drivers/dma/xilinx/zynqmp_dma.c | 2 +-
> > drivers/gpio/gpio-arizona.c | 10 +-
> > drivers/gpio/gpio-mxc.c | 2 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 2 +-
> > .../gpu/drm/amd/amdgpu/amdgpu_connectors.c | 16 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 120 ++++++------
> > drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 6 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 6 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 4 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 4 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_rap.c | 4 +-
> > drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 +-
> > .../gpu/drm/amd/amdgpu/amdgpu_securedisplay.c | 4 +-
> > drivers/gpu/drm/amd/amdkfd/kfd_process.c | 4 +-
> > .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +-
> > drivers/gpu/drm/amd/pm/amdgpu_pm.c | 178 +++++++++---------
> > .../drm/bridge/analogix/analogix_dp_core.c | 2 +-
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 4 +-
> > drivers/gpu/drm/bridge/parade-ps8640.c | 4 +-
> > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 14 +-
> > drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 12 +-
> > drivers/gpu/drm/exynos/exynos_drm_fimc.c | 4 +-
> > drivers/gpu/drm/exynos/exynos_drm_g2d.c | 4 +-
> > drivers/gpu/drm/exynos/exynos_drm_gsc.c | 6 +-
> > drivers/gpu/drm/exynos/exynos_drm_rotator.c | 2 +-
> > drivers/gpu/drm/exynos/exynos_drm_scaler.c | 2 +-
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +-
> > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 2 +-
> > drivers/gpu/drm/lima/lima_sched.c | 2 +-
> > drivers/gpu/drm/msm/adreno/adreno_device.c | 2 +-
> > drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +-
> > drivers/gpu/drm/msm/msm_gpu.c | 2 +-
> > drivers/gpu/drm/msm/msm_iommu.c | 4 +-
> > drivers/gpu/drm/msm/msm_submitqueue.c | 2 +-
> > drivers/gpu/drm/nouveau/dispnv50/disp.c | 10 +-
> > drivers/gpu/drm/nouveau/nouveau_connector.c | 4 +-
> > drivers/gpu/drm/nouveau/nouveau_debugfs.c | 8 +-
> > drivers/gpu/drm/nouveau/nouveau_display.c | 4 +-
> > drivers/gpu/drm/nouveau/nouveau_drm.c | 10 +-
> > drivers/gpu/drm/nouveau/nouveau_gem.c | 10 +-
> > drivers/gpu/drm/panel/panel-edp.c | 8 +-
> > .../gpu/drm/panel/panel-samsung-atna33xc20.c | 6 +-
> > drivers/gpu/drm/panel/panel-simple.c | 6 +-
> > drivers/gpu/drm/panfrost/panfrost_job.c | 4 +-
> > drivers/gpu/drm/panfrost/panfrost_mmu.c | 4 +-
> > drivers/gpu/drm/panfrost/panfrost_perfcnt.c | 4 +-
> > drivers/gpu/drm/panthor/panthor_device.c | 2 +-
> > drivers/gpu/drm/panthor/panthor_sched.c | 6 +-
> > drivers/gpu/drm/radeon/radeon_acpi.c | 2 +-
> > drivers/gpu/drm/radeon/radeon_connectors.c | 20 +-
> > drivers/gpu/drm/radeon/radeon_display.c | 6 +-
> > drivers/gpu/drm/radeon/radeon_drv.c | 4 +-
> > drivers/gpu/drm/radeon/radeon_fbdev.c | 4 +-
> > drivers/gpu/drm/radeon/radeon_kms.c | 10 +-
> > drivers/gpu/drm/tegra/submit.c | 2 +-
> > drivers/gpu/drm/tidss/tidss_drv.c | 2 +-
> > drivers/gpu/drm/vc4/vc4_v3d.c | 2 +-
> > drivers/hsi/controllers/omap_ssi_port.c | 42 ++---
> > drivers/hwtracing/stm/core.c | 8 +-
> > drivers/i2c/busses/i2c-amd-mp2-pci.c | 2 +-
> > drivers/i2c/busses/i2c-amd-mp2.h | 2 +-
> > drivers/i2c/busses/i2c-at91-master.c | 2 +-
> > drivers/i2c/busses/i2c-cadence.c | 2 +-
> > drivers/i2c/busses/i2c-davinci.c | 4 +-
> > drivers/i2c/busses/i2c-designware-master.c | 2 +-
> > drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +-
> > drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
> > drivers/i2c/busses/i2c-i801.c | 4 +-
> > drivers/i2c/busses/i2c-img-scb.c | 6 +-
> > drivers/i2c/busses/i2c-imx-lpi2c.c | 6 +-
> > drivers/i2c/busses/i2c-imx.c | 4 +-
> > drivers/i2c/busses/i2c-mv64xxx.c | 2 +-
> > drivers/i2c/busses/i2c-nvidia-gpu.c | 4 +-
> > drivers/i2c/busses/i2c-omap.c | 6 +-
> > drivers/i2c/busses/i2c-qcom-cci.c | 2 +-
> > drivers/i2c/busses/i2c-qcom-geni.c | 2 +-
> > drivers/i2c/busses/i2c-qup.c | 4 +-
> > drivers/i2c/busses/i2c-riic.c | 4 +-
> > drivers/i2c/busses/i2c-rzv2m.c | 2 +-
> > drivers/i2c/busses/i2c-sprd.c | 4 +-
> > drivers/i2c/busses/i2c-stm32f7.c | 10 +-
> > drivers/i2c/busses/i2c-xiic.c | 2 +-
> > drivers/i3c/master/dw-i3c-master.c | 16 +-
> > drivers/i3c/master/svc-i3c-master.c | 16 +-
> > drivers/iio/accel/bmc150-accel-core.c | 2 +-
> > drivers/iio/accel/bmi088-accel-core.c | 6 +-
> > drivers/iio/accel/fxls8962af-core.c | 2 +-
> > drivers/iio/accel/kxcjk-1013.c | 2 +-
> > drivers/iio/accel/kxsd9.c | 6 +-
> > drivers/iio/accel/mma8452.c | 2 +-
> > drivers/iio/accel/mma9551_core.c | 2 +-
> > drivers/iio/accel/msa311.c | 12 +-
> > drivers/iio/adc/ab8500-gpadc.c | 2 +-
> > drivers/iio/adc/at91-sama5d2_adc.c | 20 +-
> > drivers/iio/adc/rcar-gyroadc.c | 2 +-
> > drivers/iio/adc/stm32-adc-core.c | 2 +-
> > drivers/iio/adc/stm32-adc.c | 12 +-
> > drivers/iio/adc/sun4i-gpadc-iio.c | 4 +-
> > drivers/iio/adc/ti-ads1015.c | 2 +-
> > drivers/iio/adc/ti-ads1100.c | 2 +-
> > drivers/iio/adc/ti-ads1119.c | 4 +-
> > drivers/iio/chemical/atlas-sensor.c | 4 +-
> > .../common/hid-sensors/hid-sensor-trigger.c | 2 +-
> > drivers/iio/dac/stm32-dac.c | 6 +-
> > drivers/iio/gyro/bmg160_core.c | 2 +-
> > drivers/iio/gyro/fxas21002c_core.c | 2 +-
> > drivers/iio/gyro/mpu3050-core.c | 6 +-
> > drivers/iio/gyro/mpu3050-i2c.c | 2 +-
> > .../iio/imu/inv_icm42600/inv_icm42600_accel.c | 10 +-
> > .../imu/inv_icm42600/inv_icm42600_buffer.c | 2 +-
> > .../iio/imu/inv_icm42600/inv_icm42600_gyro.c | 10 +-
> > .../iio/imu/inv_icm42600/inv_icm42600_temp.c | 2 +-
> > drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 14 +-
> > drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 4 +-
> > drivers/iio/imu/kmx61.c | 2 +-
> > drivers/iio/light/apds9306.c | 6 +-
> > drivers/iio/light/apds9960.c | 4 +-
> > drivers/iio/light/bh1780.c | 2 +-
> > drivers/iio/light/gp2ap002.c | 4 +-
> > drivers/iio/light/isl29028.c | 2 +-
> > drivers/iio/light/ltrf216a.c | 2 +-
> > drivers/iio/light/pa12203001.c | 2 +-
> > drivers/iio/light/rpr0521.c | 2 +-
> > drivers/iio/light/tsl2583.c | 2 +-
> > drivers/iio/light/tsl2591.c | 4 +-
> > drivers/iio/light/us5182d.c | 2 +-
> > drivers/iio/light/vcnl4000.c | 2 +-
> > drivers/iio/light/vcnl4035.c | 2 +-
> > drivers/iio/magnetometer/af8133j.c | 4 +-
> > drivers/iio/magnetometer/ak8974.c | 4 +-
> > drivers/iio/magnetometer/ak8975.c | 2 +-
> > drivers/iio/magnetometer/bmc150_magn.c | 2 +-
> > drivers/iio/magnetometer/tmag5273.c | 4 +-
> > drivers/iio/magnetometer/yamaha-yas530.c | 4 +-
> > drivers/iio/pressure/bmp280-core.c | 10 +-
> > drivers/iio/pressure/icp10100.c | 2 +-
> > drivers/iio/pressure/mpl115.c | 4 +-
> > drivers/iio/pressure/zpa2326.c | 4 +-
> > .../iio/proximity/pulsedlight-lidar-lite-v2.c | 2 +-
> > drivers/iio/proximity/srf04.c | 2 +-
> > drivers/iio/temperature/mlx90614.c | 4 +-
> > drivers/iio/temperature/mlx90632.c | 4 +-
> > drivers/iio/temperature/mlx90635.c | 4 +-
> > drivers/input/keyboard/omap4-keypad.c | 8 +-
> > drivers/input/misc/cs40l50-vibra.c | 8 +-
> > drivers/iommu/arm/arm-smmu/arm-smmu.c | 2 +-
> > drivers/irqchip/irq-imx-irqsteer.c | 2 +-
> > drivers/mailbox/mtk-cmdq-mailbox.c | 10 +-
> > drivers/media/i2c/alvium-csi2.c | 2 +-
> > drivers/media/i2c/ccs/ccs-core.c | 10 +-
> > drivers/media/i2c/dw9719.c | 2 +-
> > drivers/media/i2c/gc0308.c | 6 +-
> > drivers/media/i2c/gc2145.c | 8 +-
> > drivers/media/i2c/imx283.c | 6 +-
> > drivers/media/i2c/imx290.c | 6 +-
> > drivers/media/i2c/imx296.c | 4 +-
> > drivers/media/i2c/imx415.c | 4 +-
> > drivers/media/i2c/mt9m114.c | 12 +-
> > drivers/media/i2c/ov2680.c | 2 +-
> > drivers/media/i2c/ov4689.c | 6 +-
> > drivers/media/i2c/ov5640.c | 8 +-
> > drivers/media/i2c/ov5645.c | 6 +-
> > drivers/media/i2c/ov5693.c | 2 +-
> > drivers/media/i2c/ov64a40.c | 8 +-
> > drivers/media/i2c/ov7251.c | 2 +-
> > drivers/media/i2c/ov8858.c | 4 +-
> > drivers/media/i2c/thp7312.c | 8 +-
> > drivers/media/i2c/video-i2c.c | 8 +-
> > .../media/platform/nvidia/tegra-vde/h264.c | 4 +-
> > drivers/media/platform/qcom/venus/vdec.c | 4 +-
> > drivers/media/platform/qcom/venus/venc.c | 4 +-
> > .../platform/raspberrypi/pisp_be/pisp_be.c | 4 +-
> > .../media/platform/st/sti/delta/delta-v4l2.c | 4 +-
> > drivers/media/platform/st/sti/hva/hva-hw.c | 8 +-
> > .../media/platform/verisilicon/hantro_drv.c | 2 +-
> > drivers/media/rc/gpio-ir-recv.c | 2 +-
> > drivers/mfd/arizona-irq.c | 2 +-
> > drivers/mfd/cs40l50-core.c | 2 +-
> > drivers/mfd/cs42l43.c | 2 +-
> > drivers/misc/mei/client.c | 14 +-
> > drivers/mmc/core/core.c | 4 +-
> > drivers/mmc/host/atmel-mci.c | 4 +-
> > drivers/mmc/host/dw_mmc-rockchip.c | 2 +-
> > drivers/mmc/host/dw_mmc.c | 2 +-
> > drivers/mmc/host/mmci.c | 2 +-
> > drivers/mmc/host/omap_hsmmc.c | 6 +-
> > drivers/mmc/host/sdhci-msm.c | 2 +-
> > drivers/mmc/host/sdhci-of-at91.c | 2 +-
> > drivers/mmc/host/sdhci-omap.c | 4 +-
> > drivers/mmc/host/sdhci-pci-core.c | 2 +-
> > drivers/mmc/host/sdhci-pxav3.c | 6 +-
> > drivers/mmc/host/sdhci-sprd.c | 2 +-
> > drivers/mmc/host/sdhci-xenon.c | 2 +-
> > drivers/mmc/host/sdhci_am654.c | 2 +-
> > drivers/mmc/host/tmio_mmc_core.c | 2 +-
> > drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 10 +-
> > drivers/net/ethernet/cadence/macb_main.c | 10 +-
> > drivers/net/ethernet/freescale/fec_main.c | 16 +-
> > drivers/net/ethernet/renesas/ravb_main.c | 8 +-
> > drivers/net/ethernet/ti/davinci_mdio.c | 14 +-
> > drivers/net/ipa/ipa_interrupt.c | 2 +-
> > drivers/net/ipa/ipa_main.c | 2 +-
> > drivers/net/ipa/ipa_modem.c | 8 +-
> > drivers/net/ipa/ipa_smp2p.c | 4 +-
> > drivers/net/ipa/ipa_uc.c | 4 +-
> > drivers/net/wireless/ath/wil6210/pm.c | 2 +-
> > drivers/net/wireless/ti/wl18xx/debugfs.c | 6 +-
> > drivers/net/wireless/ti/wlcore/cmd.c | 2 +-
> > drivers/net/wireless/ti/wlcore/debugfs.c | 22 +--
> > drivers/net/wireless/ti/wlcore/main.c | 72 +++----
> > drivers/net/wireless/ti/wlcore/scan.c | 2 +-
> > drivers/net/wireless/ti/wlcore/sysfs.c | 2 +-
> > drivers/net/wireless/ti/wlcore/testmode.c | 4 +-
> > drivers/net/wireless/ti/wlcore/tx.c | 2 +-
> > drivers/net/wireless/ti/wlcore/vendor_cmd.c | 6 +-
> > drivers/net/wwan/qcom_bam_dmux.c | 4 +-
> > drivers/net/wwan/t7xx/t7xx_hif_cldma.c | 6 +-
> > drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c | 6 +-
> > drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c | 4 +-
> > drivers/nfc/trf7970a.c | 2 +-
> > drivers/pci/pcie/portdrv.c | 2 +-
> > drivers/phy/motorola/phy-mapphone-mdm6600.c | 4 +-
> > drivers/phy/ti/phy-twl4030-usb.c | 8 +-
> > drivers/power/supply/bq24190_charger.c | 28 +--
> > drivers/power/supply/twl4030_charger.c | 2 +-
> > drivers/pwm/pwm-img.c | 4 +-
> > drivers/regulator/stm32-vrefbuf.c | 12 +-
> > drivers/remoteproc/omap_remoteproc.c | 6 +-
> > drivers/slimbus/core.c | 2 +-
> > drivers/slimbus/messaging.c | 4 +-
> > drivers/soc/apple/mailbox.c | 2 +-
> > drivers/soundwire/bus.c | 2 +-
> > drivers/soundwire/cadence_master.c | 2 +-
> > drivers/soundwire/qcom.c | 6 +-
> > drivers/spi/atmel-quadspi.c | 10 +-
> > drivers/spi/spi-cadence-quadspi.c | 4 +-
> > drivers/spi/spi-cadence.c | 2 +-
> > drivers/spi/spi-dw-pci.c | 2 +-
> > drivers/spi/spi-fsl-espi.c | 4 +-
> > drivers/spi/spi-fsl-lpspi.c | 4 +-
> > drivers/spi/spi-imx.c | 6 +-
> > drivers/spi/spi-mtk-nor.c | 2 +-
> > drivers/spi/spi-omap2-mcspi.c | 6 +-
> > drivers/spi/spi-pxa2xx-pci.c | 2 +-
> > drivers/spi/spi-s3c64xx.c | 6 +-
> > drivers/spi/spi-sprd.c | 2 +-
> > drivers/spi/spi-stm32-qspi.c | 14 +-
> > drivers/spi/spi-stm32.c | 4 +-
> > drivers/spi/spi-ti-qspi.c | 4 +-
> > drivers/spi/spi-zynqmp-gqspi.c | 2 +-
> > drivers/spi/spi.c | 6 +-
> > drivers/staging/greybus/gbphy.h | 2 +-
> > drivers/staging/media/rkvdec/rkvdec.c | 2 +-
> > drivers/thunderbolt/debugfs.c | 22 +--
> > drivers/thunderbolt/domain.c | 4 +-
> > drivers/thunderbolt/icm.c | 14 +-
> > drivers/thunderbolt/nhi.c | 2 +-
> > drivers/thunderbolt/retimer.c | 4 +-
> > drivers/thunderbolt/switch.c | 6 +-
> > drivers/thunderbolt/tb.c | 18 +-
> > drivers/thunderbolt/usb4_port.c | 4 +-
> > drivers/tty/serial/8250/8250_omap.c | 18 +-
> > drivers/tty/serial/8250/8250_port.c | 4 +-
> > drivers/tty/serial/fsl_lpuart.c | 2 +-
> > drivers/tty/serial/serial_core.c | 2 +-
> > drivers/tty/serial/uartlite.c | 4 +-
> > drivers/tty/serial/xilinx_uartps.c | 2 +-
> > drivers/usb/cdns3/cdns3-gadget.c | 2 +-
> > drivers/usb/cdns3/cdnsp-gadget.c | 2 +-
> > drivers/usb/chipidea/core.c | 2 +-
> > drivers/usb/chipidea/otg_fsm.c | 2 +-
> > drivers/usb/dwc3/core.c | 2 +-
> > drivers/usb/dwc3/dwc3-am62.c | 2 +-
> > drivers/usb/dwc3/dwc3-imx8mp.c | 2 +-
> > drivers/usb/gadget/udc/cdns2/cdns2-gadget.c | 2 +-
> > drivers/usb/host/xhci-mtk.c | 2 +-
> > drivers/usb/misc/apple-mfi-fastcharge.c | 2 +-
> > drivers/usb/mtu3/mtu3_plat.c | 2 +-
> > drivers/usb/musb/musb_core.c | 10 +-
> > drivers/usb/musb/musb_debugfs.c | 10 +-
> > drivers/usb/musb/musb_dsps.c | 2 +-
> > drivers/usb/musb/musb_gadget.c | 8 +-
> > drivers/usb/musb/omap2430.c | 2 +-
> > drivers/w1/masters/omap_hdq.c | 10 +-
> > include/linux/greybus/bundle.h | 2 +-
> > sound/hda/hdac_device.c | 2 +-
> > sound/pci/hda/cs35l41_hda.c | 8 +-
> > sound/pci/hda/cs35l56_hda.c | 2 +-
> > sound/pci/hda/hda_intel.c | 2 +-
> > sound/pci/hda/tas2781_hda_i2c.c | 6 +-
> > sound/soc/atmel/mchp-spdifrx.c | 12 +-
> > sound/soc/codecs/arizona-jack.c | 12 +-
> > sound/soc/codecs/arizona.c | 2 +-
> > sound/soc/codecs/cs35l41.c | 4 +-
> > sound/soc/codecs/cs35l45.c | 2 +-
> > sound/soc/codecs/cs35l56-sdw.c | 4 +-
> > sound/soc/codecs/cs35l56-shared.c | 2 +-
> > sound/soc/codecs/cs35l56.c | 2 +-
> > sound/soc/codecs/cs42l42-sdw.c | 2 +-
> > sound/soc/codecs/cs42l42.c | 4 +-
> > sound/soc/codecs/cs42l43-jack.c | 10 +-
> > sound/soc/codecs/cs42l43.c | 4 +-
> > sound/soc/codecs/hda.c | 6 +-
> > sound/soc/codecs/madera.c | 6 +-
> > sound/soc/codecs/max98363.c | 2 +-
> > sound/soc/codecs/max98373-sdw.c | 2 +-
> > sound/soc/codecs/rt1017-sdca-sdw.c | 2 +-
> > sound/soc/codecs/rt1308-sdw.c | 2 +-
> > sound/soc/codecs/rt1316-sdw.c | 2 +-
> > sound/soc/codecs/rt1318-sdw.c | 2 +-
> > sound/soc/codecs/rt1320-sdw.c | 2 +-
> > sound/soc/codecs/rt5682-sdw.c | 2 +-
> > sound/soc/codecs/rt700.c | 4 +-
> > sound/soc/codecs/rt711-sdca.c | 4 +-
> > sound/soc/codecs/rt711.c | 4 +-
> > sound/soc/codecs/rt712-sdca-dmic.c | 2 +-
> > sound/soc/codecs/rt712-sdca.c | 4 +-
> > sound/soc/codecs/rt715-sdca.c | 2 +-
> > sound/soc/codecs/rt715.c | 2 +-
> > sound/soc/codecs/rt722-sdca.c | 4 +-
> > sound/soc/codecs/wcd-mbhc-v2.c | 4 +-
> > sound/soc/codecs/wsa881x.c | 2 +-
> > sound/soc/codecs/wsa884x.c | 2 +-
> > sound/soc/intel/atom/sst/sst_pvt.c | 2 +-
> > sound/soc/intel/avs/core.c | 2 +-
> > sound/soc/intel/avs/debugfs.c | 4 +-
> > sound/soc/intel/avs/pcm.c | 2 +-
> > sound/soc/intel/catpt/pcm.c | 12 +-
> > sound/soc/intel/catpt/sysfs.c | 2 +-
> > sound/soc/soc-component.c | 2 +-
> > sound/soc/sof/control.c | 2 +-
> > sound/soc/sof/debug.c | 2 +-
> > sound/soc/sof/ipc3-dtrace.c | 2 +-
> > sound/soc/sof/ipc4-loader.c | 2 +-
> > sound/soc/sof/pcm.c | 2 +-
> > sound/soc/sof/sof-client-ipc-flood-test.c | 2 +-
> > .../soc/sof/sof-client-ipc-kernel-injector.c | 2 +-
> > sound/soc/sof/sof-client-ipc-msg-injector.c | 2 +-
> > sound/soc/sof/sof-client-probes.c | 6 +-
> > sound/x86/intel_hdmi_audio.c | 6 +-
> > 373 files changed, 1076 insertions(+), 1076 deletions(-)
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-07 18:49 ` Laurent Pinchart
@ 2024-10-07 22:08 ` Ulf Hansson
2024-10-07 22:25 ` Laurent Pinchart
2024-10-08 20:38 ` Uwe Kleine-König
1 sibling, 1 reply; 13+ messages in thread
From: Ulf Hansson @ 2024-10-07 22:08 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
linux-input, patches, iommu, imx, linux-mediatek, linux-media,
linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
rafael, Andy Shevchenko
On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Ulf,
>
> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> > >
> > > Hello everyone,
> > >
> > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > always used together, apart from bugs which are likely common. Going
> > > forward, most new users should be using pm_runtime_put_autosuspend().
> > >
> > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > and pm_runtime_mark_last_busy().
> >
> > That sounds like it could cause a lot of churns.
> >
> > Why not add a new helper function that does the
> > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > things? Then we can start moving users over to this new interface,
> > rather than having this intermediate step?
>
> I think the API would be nicer if we used the shortest and simplest
> function names for the most common use cases. Following
> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> most common use case. That's why I like Sakari's approach of repurposing
> pm_runtime_put_autosuspend(), and introducing
> __pm_runtime_put_autosuspend() for the odd cases where
> pm_runtime_mark_last_busy() shouldn't be called.
Okay, so the reason for this approach is because we couldn't find a
short and descriptive name that could be used in favor of
pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
you like it - or not. :-)
I don't know what options you guys discussed, but to me the entire
"autosuspend"-suffix isn't really that necessary in my opinion. There
are more ways than calling pm_runtime_put_autosuspend() that triggers
us to use the RPM_AUTO flag for rpm_suspend(). For example, just
calling pm_runtime_put() has the similar effect.
Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
during rpm_resume() too, for example. So why bother about having
"mark_last_busy" in the new name too.
That said, my suggestion is simply "pm_runtime_put_suspend".
If you don't like it, I will certainly not object to your current
approach, even if I think it leads to unnecessary churns.
[...]
Kind regards
Uffe
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-07 22:08 ` Ulf Hansson
@ 2024-10-07 22:25 ` Laurent Pinchart
2024-10-07 22:34 ` Ulf Hansson
0 siblings, 1 reply; 13+ messages in thread
From: Laurent Pinchart @ 2024-10-07 22:25 UTC (permalink / raw)
To: Ulf Hansson
Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
linux-input, patches, iommu, imx, linux-mediatek, linux-media,
linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
rafael, Andy Shevchenko
Hi Ulf,
On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > >
> > > > Hello everyone,
> > > >
> > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > always used together, apart from bugs which are likely common. Going
> > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > >
> > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > and pm_runtime_mark_last_busy().
> > >
> > > That sounds like it could cause a lot of churns.
> > >
> > > Why not add a new helper function that does the
> > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > things? Then we can start moving users over to this new interface,
> > > rather than having this intermediate step?
> >
> > I think the API would be nicer if we used the shortest and simplest
> > function names for the most common use cases. Following
> > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > most common use case. That's why I like Sakari's approach of repurposing
> > pm_runtime_put_autosuspend(), and introducing
> > __pm_runtime_put_autosuspend() for the odd cases where
> > pm_runtime_mark_last_busy() shouldn't be called.
>
> Okay, so the reason for this approach is because we couldn't find a
> short and descriptive name that could be used in favor of
> pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> you like it - or not. :-)
I like the idea at least :-)
> I don't know what options you guys discussed, but to me the entire
> "autosuspend"-suffix isn't really that necessary in my opinion. There
> are more ways than calling pm_runtime_put_autosuspend() that triggers
> us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> calling pm_runtime_put() has the similar effect.
To be honest, I'm lost there. pm_runtime_put() calls
__pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
RPM_ASYNC | RPM_AUTO).
>
> Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> during rpm_resume() too, for example. So why bother about having
> "mark_last_busy" in the new name too.
>
> That said, my suggestion is simply "pm_runtime_put_suspend".
Can we do even better, and make pm_runtime_put() to handle autosuspend
automatically when autosuspend is enabled ?
> If you don't like it, I will certainly not object to your current
> approach, even if I think it leads to unnecessary churns.
>
> [...]
>
> Kind regards
> Uffe
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-07 22:25 ` Laurent Pinchart
@ 2024-10-07 22:34 ` Ulf Hansson
2024-10-08 18:24 ` Rafael J. Wysocki
0 siblings, 1 reply; 13+ messages in thread
From: Ulf Hansson @ 2024-10-07 22:34 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
linux-input, patches, iommu, imx, linux-mediatek, linux-media,
linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
rafael, Andy Shevchenko
On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Ulf,
>
> On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > >
> > > > > Hello everyone,
> > > > >
> > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > always used together, apart from bugs which are likely common. Going
> > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > >
> > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > and pm_runtime_mark_last_busy().
> > > >
> > > > That sounds like it could cause a lot of churns.
> > > >
> > > > Why not add a new helper function that does the
> > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > things? Then we can start moving users over to this new interface,
> > > > rather than having this intermediate step?
> > >
> > > I think the API would be nicer if we used the shortest and simplest
> > > function names for the most common use cases. Following
> > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > most common use case. That's why I like Sakari's approach of repurposing
> > > pm_runtime_put_autosuspend(), and introducing
> > > __pm_runtime_put_autosuspend() for the odd cases where
> > > pm_runtime_mark_last_busy() shouldn't be called.
> >
> > Okay, so the reason for this approach is because we couldn't find a
> > short and descriptive name that could be used in favor of
> > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > you like it - or not. :-)
>
> I like the idea at least :-)
>
> > I don't know what options you guys discussed, but to me the entire
> > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > calling pm_runtime_put() has the similar effect.
>
> To be honest, I'm lost there. pm_runtime_put() calls
> __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> RPM_ASYNC | RPM_AUTO).
__pm_runtime_idle() ends up calling rpm_idle(), which may call
rpm_suspend() - if it succeeds to idle the device. In that case, it
tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
to what is happening when calling pm_runtime_put_autosuspend().
>
> >
> > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > during rpm_resume() too, for example. So why bother about having
> > "mark_last_busy" in the new name too.
> >
> > That said, my suggestion is simply "pm_runtime_put_suspend".
>
> Can we do even better, and make pm_runtime_put() to handle autosuspend
> automatically when autosuspend is enabled ?
As stated above, this is already the case.
>
> > If you don't like it, I will certainly not object to your current
> > approach, even if I think it leads to unnecessary churns.
> >
> > [...]
> >
> > Kind regards
> > Uffe
>
> --
> Regards,
>
> Laurent Pinchart
Kind regards
Uffe
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-07 22:34 ` Ulf Hansson
@ 2024-10-08 18:24 ` Rafael J. Wysocki
2024-10-09 10:20 ` Rafael J. Wysocki
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Rafael J. Wysocki @ 2024-10-08 18:24 UTC (permalink / raw)
To: Ulf Hansson, Laurent Pinchart, Sakari Ailus
Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
Andy Shevchenko
On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > Hi Ulf,
> >
> > On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > > >
> > > > > > Hello everyone,
> > > > > >
> > > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > > always used together, apart from bugs which are likely common. Going
> > > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > > >
> > > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > > and pm_runtime_mark_last_busy().
> > > > >
> > > > > That sounds like it could cause a lot of churns.
> > > > >
> > > > > Why not add a new helper function that does the
> > > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > > things? Then we can start moving users over to this new interface,
> > > > > rather than having this intermediate step?
> > > >
> > > > I think the API would be nicer if we used the shortest and simplest
> > > > function names for the most common use cases. Following
> > > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > > most common use case. That's why I like Sakari's approach of repurposing
> > > > pm_runtime_put_autosuspend(), and introducing
> > > > __pm_runtime_put_autosuspend() for the odd cases where
> > > > pm_runtime_mark_last_busy() shouldn't be called.
> > >
> > > Okay, so the reason for this approach is because we couldn't find a
> > > short and descriptive name that could be used in favor of
> > > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > > you like it - or not. :-)
> >
> > I like the idea at least :-)
> >
> > > I don't know what options you guys discussed, but to me the entire
> > > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > > calling pm_runtime_put() has the similar effect.
> >
> > To be honest, I'm lost there. pm_runtime_put() calls
> > __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> > pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> > RPM_ASYNC | RPM_AUTO).
>
> __pm_runtime_idle() ends up calling rpm_idle(), which may call
> rpm_suspend() - if it succeeds to idle the device. In that case, it
> tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> to what is happening when calling pm_runtime_put_autosuspend().
Right.
For almost everybody, except for a small bunch of drivers that
actually have a .runtime_idle() callback, pm_runtime_put() is
literally equivalent to pm_runtime_put_autosuspend().
So really the question is why anyone who doesn't provide a
.runtime_idle() callback bothers with using this special
pm_runtime_put_autosuspend() thing, which really means "do a
runtime_put(), but skip my .runtime_idle() callback".
> >
> > >
> > > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > > during rpm_resume() too, for example. So why bother about having
> > > "mark_last_busy" in the new name too.
> > >
> > > That said, my suggestion is simply "pm_runtime_put_suspend".
> >
> > Can we do even better, and make pm_runtime_put() to handle autosuspend
> > automatically when autosuspend is enabled ?
>
> As stated above, this is already the case.
What really is needed appears to be a combination of
pm_runtime_mark_last_busy() with pm_runtime_put().
Granted, pm_runtime_put() could do the pm_runtime_mark_last_busy()
thing automatically if autosuspend is enabled and the only consequence
of it might be delaying a suspend of the device until its autosuspend
timer expires, which should not be a problem in the vast majority of
cases.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-07 18:49 ` Laurent Pinchart
2024-10-07 22:08 ` Ulf Hansson
@ 2024-10-08 20:38 ` Uwe Kleine-König
1 sibling, 0 replies; 13+ messages in thread
From: Uwe Kleine-König @ 2024-10-08 20:38 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Ulf Hansson, Sakari Ailus, dri-devel, linux-kernel,
linux-bluetooth, linux-clk, linux-crypto, dmaengine, linux-gpio,
amd-gfx, nouveau, linux-stm32, linux-arm-kernel, linux-i2c,
linux-i3c, linux-iio, linux-input, patches, iommu, imx,
linux-mediatek, linux-media, linux-mmc, linux-mtd, netdev,
linux-wireless, linux-pci, linux-phy, linux-pwm, linux-remoteproc,
linux-sound, linux-spi, linux-staging, linux-usb, linux-serial,
greybus-dev, asahi, rafael, Andy Shevchenko
[-- Attachment #1: Type: text/plain, Size: 2371 bytes --]
Hello,
On Mon, Oct 07, 2024 at 09:49:24PM +0300, Laurent Pinchart wrote:
> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> > >
> > > Hello everyone,
> > >
> > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > always used together, apart from bugs which are likely common. Going
> > > forward, most new users should be using pm_runtime_put_autosuspend().
> > >
> > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > and pm_runtime_mark_last_busy().
> >
> > That sounds like it could cause a lot of churns.
> >
> > Why not add a new helper function that does the
> > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > things? Then we can start moving users over to this new interface,
> > rather than having this intermediate step?
>
> I think the API would be nicer if we used the shortest and simplest
> function names for the most common use cases. Following
> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> most common use case. That's why I like Sakari's approach of repurposing
> pm_runtime_put_autosuspend(), and introducing
> __pm_runtime_put_autosuspend() for the odd cases where
> pm_runtime_mark_last_busy() shouldn't be called.
That's ok for me. However this patch series isn't the optimal path to
there because most drivers (i.e. those that already today do
pm_runtime_mark_last_busy() in combination with
pm_runtime_put_autosuspend()) have to be patched twice.
The saner route is: Only convert the drivers with a sole
pm_runtime_put_autosuspend() (i.e. without pm_runtime_mark_last_busy())
to __pm_runtime_put_autosuspend(). Then add the mark_last_busy() bits to
pm_runtime_put_autosuspend() and then drop the explicit calls to
pm_runtime_mark_last_busy() before pm_runtime_put_autosuspend().
(Note this doesn't take into account Rafael's position that
pm_runtime_put() might be the saner option. My argument applies for that
conversion analogously.)
Best regards
Uwe
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-08 18:24 ` Rafael J. Wysocki
@ 2024-10-09 10:20 ` Rafael J. Wysocki
2024-10-09 10:27 ` Ulf Hansson
2024-10-09 12:48 ` Richard Fitzgerald
2 siblings, 0 replies; 13+ messages in thread
From: Rafael J. Wysocki @ 2024-10-09 10:20 UTC (permalink / raw)
To: Ulf Hansson, Laurent Pinchart, Sakari Ailus
Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
Andy Shevchenko
On Tue, Oct 8, 2024 at 8:24 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com> wrote:
> > >
> > > Hi Ulf,
> > >
> > > On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > > > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > > > >
> > > > > > > Hello everyone,
> > > > > > >
> > > > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > > > always used together, apart from bugs which are likely common. Going
> > > > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > > > >
> > > > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > > > and pm_runtime_mark_last_busy().
> > > > > >
> > > > > > That sounds like it could cause a lot of churns.
> > > > > >
> > > > > > Why not add a new helper function that does the
> > > > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > > > things? Then we can start moving users over to this new interface,
> > > > > > rather than having this intermediate step?
> > > > >
> > > > > I think the API would be nicer if we used the shortest and simplest
> > > > > function names for the most common use cases. Following
> > > > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > > > most common use case. That's why I like Sakari's approach of repurposing
> > > > > pm_runtime_put_autosuspend(), and introducing
> > > > > __pm_runtime_put_autosuspend() for the odd cases where
> > > > > pm_runtime_mark_last_busy() shouldn't be called.
> > > >
> > > > Okay, so the reason for this approach is because we couldn't find a
> > > > short and descriptive name that could be used in favor of
> > > > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > > > you like it - or not. :-)
> > >
> > > I like the idea at least :-)
> > >
> > > > I don't know what options you guys discussed, but to me the entire
> > > > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > > > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > > > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > > > calling pm_runtime_put() has the similar effect.
> > >
> > > To be honest, I'm lost there. pm_runtime_put() calls
> > > __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> > > pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> > > RPM_ASYNC | RPM_AUTO).
> >
> > __pm_runtime_idle() ends up calling rpm_idle(), which may call
> > rpm_suspend() - if it succeeds to idle the device. In that case, it
> > tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> > to what is happening when calling pm_runtime_put_autosuspend().
>
> Right.
>
> For almost everybody, except for a small bunch of drivers that
> actually have a .runtime_idle() callback, pm_runtime_put() is
> literally equivalent to pm_runtime_put_autosuspend().
>
> So really the question is why anyone who doesn't provide a
> .runtime_idle() callback bothers with using this special
> pm_runtime_put_autosuspend() thing, which really means "do a
> runtime_put(), but skip my .runtime_idle() callback".
>
> > >
> > > >
> > > > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > > > during rpm_resume() too, for example. So why bother about having
> > > > "mark_last_busy" in the new name too.
> > > >
> > > > That said, my suggestion is simply "pm_runtime_put_suspend".
> > >
> > > Can we do even better, and make pm_runtime_put() to handle autosuspend
> > > automatically when autosuspend is enabled ?
> >
> > As stated above, this is already the case.
>
> What really is needed appears to be a combination of
> pm_runtime_mark_last_busy() with pm_runtime_put().
>
> Granted, pm_runtime_put() could do the pm_runtime_mark_last_busy()
> thing automatically if autosuspend is enabled and the only consequence
> of it might be delaying a suspend of the device until its autosuspend
> timer expires, which should not be a problem in the vast majority of
> cases.
That said, it is likely better to avoid surprising the current users
of pm_runtime_put() and define something like
static inline void pm_runtime_touch_and_put(struct device *dev)
{
pm_runtime_mark_last_busy(dev);
pm_runtime_put(dev);
}
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-08 18:24 ` Rafael J. Wysocki
2024-10-09 10:20 ` Rafael J. Wysocki
@ 2024-10-09 10:27 ` Ulf Hansson
2024-10-09 12:48 ` Richard Fitzgerald
2 siblings, 0 replies; 13+ messages in thread
From: Ulf Hansson @ 2024-10-09 10:27 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Laurent Pinchart, Sakari Ailus, dri-devel, linux-kernel,
linux-bluetooth, linux-clk, linux-crypto, dmaengine, linux-gpio,
amd-gfx, nouveau, linux-stm32, linux-arm-kernel, linux-i2c,
linux-i3c, linux-iio, linux-input, patches, iommu, imx,
linux-mediatek, linux-media, linux-mmc, linux-mtd, netdev,
linux-wireless, linux-pci, linux-phy, linux-pwm, linux-remoteproc,
linux-sound, linux-spi, linux-staging, linux-usb, linux-serial,
greybus-dev, asahi, Andy Shevchenko
On Tue, 8 Oct 2024 at 20:25, Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com> wrote:
> > >
> > > Hi Ulf,
> > >
> > > On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > > > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > > > >
> > > > > > > Hello everyone,
> > > > > > >
> > > > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > > > always used together, apart from bugs which are likely common. Going
> > > > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > > > >
> > > > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > > > and pm_runtime_mark_last_busy().
> > > > > >
> > > > > > That sounds like it could cause a lot of churns.
> > > > > >
> > > > > > Why not add a new helper function that does the
> > > > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > > > things? Then we can start moving users over to this new interface,
> > > > > > rather than having this intermediate step?
> > > > >
> > > > > I think the API would be nicer if we used the shortest and simplest
> > > > > function names for the most common use cases. Following
> > > > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > > > most common use case. That's why I like Sakari's approach of repurposing
> > > > > pm_runtime_put_autosuspend(), and introducing
> > > > > __pm_runtime_put_autosuspend() for the odd cases where
> > > > > pm_runtime_mark_last_busy() shouldn't be called.
> > > >
> > > > Okay, so the reason for this approach is because we couldn't find a
> > > > short and descriptive name that could be used in favor of
> > > > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > > > you like it - or not. :-)
> > >
> > > I like the idea at least :-)
> > >
> > > > I don't know what options you guys discussed, but to me the entire
> > > > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > > > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > > > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > > > calling pm_runtime_put() has the similar effect.
> > >
> > > To be honest, I'm lost there. pm_runtime_put() calls
> > > __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> > > pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> > > RPM_ASYNC | RPM_AUTO).
> >
> > __pm_runtime_idle() ends up calling rpm_idle(), which may call
> > rpm_suspend() - if it succeeds to idle the device. In that case, it
> > tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> > to what is happening when calling pm_runtime_put_autosuspend().
>
> Right.
>
> For almost everybody, except for a small bunch of drivers that
> actually have a .runtime_idle() callback, pm_runtime_put() is
> literally equivalent to pm_runtime_put_autosuspend().
>
> So really the question is why anyone who doesn't provide a
> .runtime_idle() callback bothers with using this special
> pm_runtime_put_autosuspend() thing, which really means "do a
> runtime_put(), but skip my .runtime_idle() callback".
My guess is that it's in most cases a legacy pattern that is being
followed. Also note that rpm_idle() didn't "always" tag on the
RPM_AUTO flag, even if it's quite a while ago (2013) since we added
it.
Unless there is some actual optimization involved, as it also allows
us to skip calling rpm_idle() and go directly for rpm_suspend().
>
> > >
> > > >
> > > > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > > > during rpm_resume() too, for example. So why bother about having
> > > > "mark_last_busy" in the new name too.
> > > >
> > > > That said, my suggestion is simply "pm_runtime_put_suspend".
> > >
> > > Can we do even better, and make pm_runtime_put() to handle autosuspend
> > > automatically when autosuspend is enabled ?
> >
> > As stated above, this is already the case.
>
> What really is needed appears to be a combination of
> pm_runtime_mark_last_busy() with pm_runtime_put().
This makes sense to me too, but I don't think we should limit it to this.
Making pm_runtime_put_autosuspend (or if the name
"pm_runtime_put_suspend" is better?) to do the similar thing, is
probably a good idea too. At least in my opinion.
>
> Granted, pm_runtime_put() could do the pm_runtime_mark_last_busy()
> thing automatically if autosuspend is enabled and the only consequence
> of it might be delaying a suspend of the device until its autosuspend
> timer expires, which should not be a problem in the vast majority of
> cases.
Right.
I guess we should expect the *sync* variants to be used, if the timer
really needs to be overridden.
Kind regards
Uffe
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-08 18:24 ` Rafael J. Wysocki
2024-10-09 10:20 ` Rafael J. Wysocki
2024-10-09 10:27 ` Ulf Hansson
@ 2024-10-09 12:48 ` Richard Fitzgerald
2024-10-09 13:34 ` Rafael J. Wysocki
2 siblings, 1 reply; 13+ messages in thread
From: Richard Fitzgerald @ 2024-10-09 12:48 UTC (permalink / raw)
To: Rafael J. Wysocki, Ulf Hansson, Laurent Pinchart, Sakari Ailus
Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
linux-pwm, linux-remoteproc, linux-sound, linux-spi,
linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
Andy Shevchenko
On 08/10/2024 7:24 pm, Rafael J. Wysocki wrote:
> On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>>
>> On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
>> <laurent.pinchart@ideasonboard.com> wrote:
>>>
>>> Hi Ulf,
>>>
>>> On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
>>>> On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
>>>>> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
>>>>>> On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
>>>>>>>
>>>>>>> Hello everyone,
>>>>>>>
>>>>>>> This set will switch the users of pm_runtime_put_autosuspend() to
>>>>>>> __pm_runtime_put_autosuspend() while the former will soon be re-purposed
>>>>>>> to include a call to pm_runtime_mark_last_busy(). The two are almost
>>>>>>> always used together, apart from bugs which are likely common. Going
>>>>>>> forward, most new users should be using pm_runtime_put_autosuspend().
>>>>>>>
>>>>>>> Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
>>>>>>> I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
>>>>>>> and pm_runtime_mark_last_busy().
>>>>>>
>>>>>> That sounds like it could cause a lot of churns.
>>>>>>
>>>>>> Why not add a new helper function that does the
>>>>>> pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
>>>>>> things? Then we can start moving users over to this new interface,
>>>>>> rather than having this intermediate step?
>>>>>
>>>>> I think the API would be nicer if we used the shortest and simplest
>>>>> function names for the most common use cases. Following
>>>>> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
>>>>> most common use case. That's why I like Sakari's approach of repurposing
>>>>> pm_runtime_put_autosuspend(), and introducing
>>>>> __pm_runtime_put_autosuspend() for the odd cases where
>>>>> pm_runtime_mark_last_busy() shouldn't be called.
>>>>
>>>> Okay, so the reason for this approach is because we couldn't find a
>>>> short and descriptive name that could be used in favor of
>>>> pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
>>>> you like it - or not. :-)
>>>
>>> I like the idea at least :-)
>>>
>>>> I don't know what options you guys discussed, but to me the entire
>>>> "autosuspend"-suffix isn't really that necessary in my opinion. There
>>>> are more ways than calling pm_runtime_put_autosuspend() that triggers
>>>> us to use the RPM_AUTO flag for rpm_suspend(). For example, just
>>>> calling pm_runtime_put() has the similar effect.
>>>
>>> To be honest, I'm lost there. pm_runtime_put() calls
>>> __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
>>> pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
>>> RPM_ASYNC | RPM_AUTO).
>>
>> __pm_runtime_idle() ends up calling rpm_idle(), which may call
>> rpm_suspend() - if it succeeds to idle the device. In that case, it
>> tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
>> to what is happening when calling pm_runtime_put_autosuspend().
>
> Right.
>
> For almost everybody, except for a small bunch of drivers that
> actually have a .runtime_idle() callback, pm_runtime_put() is
> literally equivalent to pm_runtime_put_autosuspend().
>
> So really the question is why anyone who doesn't provide a
> .runtime_idle() callback bothers with using this special
> pm_runtime_put_autosuspend() thing,
Because they are following the documentation? It says:
"Drivers should call pm_runtime_mark_last_busy() to update this field
after carrying out I/O, typically just before calling
pm_runtime_put_autosuspend()."
and
"In order to use autosuspend, subsystems or drivers must call
pm_runtime_use_autosuspend() (...), and thereafter they should use the
various `*_autosuspend()` helper functions instead of the non#
autosuspend counterparts"
So the documentation says I should be using pm_runtime_put_autosuspend()
instead of pm_runtime_put().
Seems unfair to criticise people for following the documentation.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
2024-10-09 12:48 ` Richard Fitzgerald
@ 2024-10-09 13:34 ` Rafael J. Wysocki
0 siblings, 0 replies; 13+ messages in thread
From: Rafael J. Wysocki @ 2024-10-09 13:34 UTC (permalink / raw)
To: Richard Fitzgerald, Sakari Ailus
Cc: Ulf Hansson, Laurent Pinchart, dri-devel, linux-kernel,
linux-bluetooth, linux-clk, linux-crypto, dmaengine, linux-gpio,
amd-gfx, nouveau, linux-stm32, linux-arm-kernel, linux-i2c,
linux-i3c, linux-iio, linux-input, patches, iommu, imx,
linux-mediatek, linux-media, linux-mmc, linux-mtd, netdev,
linux-wireless, linux-pci, linux-phy, linux-pwm, linux-remoteproc,
linux-sound, linux-spi, linux-staging, linux-usb, linux-serial,
greybus-dev, asahi, Andy Shevchenko, Uwe Kleine-König
On Wed, Oct 9, 2024 at 2:48 PM Richard Fitzgerald
<rf@opensource.cirrus.com> wrote:
>
> On 08/10/2024 7:24 pm, Rafael J. Wysocki wrote:
> > On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >>
> >> On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> >> <laurent.pinchart@ideasonboard.com> wrote:
> >>>
> >>> Hi Ulf,
> >>>
> >>> On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> >>>> On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> >>>>> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> >>>>>> On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> >>>>>>>
> >>>>>>> Hello everyone,
> >>>>>>>
> >>>>>>> This set will switch the users of pm_runtime_put_autosuspend() to
> >>>>>>> __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> >>>>>>> to include a call to pm_runtime_mark_last_busy(). The two are almost
> >>>>>>> always used together, apart from bugs which are likely common. Going
> >>>>>>> forward, most new users should be using pm_runtime_put_autosuspend().
> >>>>>>>
> >>>>>>> Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> >>>>>>> I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> >>>>>>> and pm_runtime_mark_last_busy().
> >>>>>>
> >>>>>> That sounds like it could cause a lot of churns.
> >>>>>>
> >>>>>> Why not add a new helper function that does the
> >>>>>> pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> >>>>>> things? Then we can start moving users over to this new interface,
> >>>>>> rather than having this intermediate step?
> >>>>>
> >>>>> I think the API would be nicer if we used the shortest and simplest
> >>>>> function names for the most common use cases. Following
> >>>>> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> >>>>> most common use case. That's why I like Sakari's approach of repurposing
> >>>>> pm_runtime_put_autosuspend(), and introducing
> >>>>> __pm_runtime_put_autosuspend() for the odd cases where
> >>>>> pm_runtime_mark_last_busy() shouldn't be called.
> >>>>
> >>>> Okay, so the reason for this approach is because we couldn't find a
> >>>> short and descriptive name that could be used in favor of
> >>>> pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> >>>> you like it - or not. :-)
> >>>
> >>> I like the idea at least :-)
> >>>
> >>>> I don't know what options you guys discussed, but to me the entire
> >>>> "autosuspend"-suffix isn't really that necessary in my opinion. There
> >>>> are more ways than calling pm_runtime_put_autosuspend() that triggers
> >>>> us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> >>>> calling pm_runtime_put() has the similar effect.
> >>>
> >>> To be honest, I'm lost there. pm_runtime_put() calls
> >>> __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> >>> pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> >>> RPM_ASYNC | RPM_AUTO).
> >>
> >> __pm_runtime_idle() ends up calling rpm_idle(), which may call
> >> rpm_suspend() - if it succeeds to idle the device. In that case, it
> >> tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> >> to what is happening when calling pm_runtime_put_autosuspend().
> >
> > Right.
> >
> > For almost everybody, except for a small bunch of drivers that
> > actually have a .runtime_idle() callback, pm_runtime_put() is
> > literally equivalent to pm_runtime_put_autosuspend().
> >
> > So really the question is why anyone who doesn't provide a
> > .runtime_idle() callback bothers with using this special
> > pm_runtime_put_autosuspend() thing,
>
> Because they are following the documentation? It says:
>
> "Drivers should call pm_runtime_mark_last_busy() to update this field
> after carrying out I/O, typically just before calling
> pm_runtime_put_autosuspend()."
>
> and
>
> "In order to use autosuspend, subsystems or drivers must call
> pm_runtime_use_autosuspend() (...), and thereafter they should use the
> various `*_autosuspend()` helper functions instead of the non#
> autosuspend counterparts"
>
> So the documentation says I should be using pm_runtime_put_autosuspend()
> instead of pm_runtime_put().
>
> Seems unfair to criticise people for following the documentation.
I'm not criticising anyone, just wondering why they do what they do.
"Because it is documented this way" is a fair answer, but it doesn't
invalidate the observation that the difference between
pm_runtime_put_autosuspend() and pm_runtime_put() boils down to the
cases when the .runtime_idle() callback is present (which are few and
far between so to speak). Moreover, there are call sites using
pm_runtime_*() functions even though they may not know whether or not
autosuspend is enabled for the target devices, so the advice given in
the documentation cannot be universally followed regardless.
This thread is about the way to go, generally speaking, and what I'm
saying is effectively that replacing pm_runtime_put_autosuspend() with
pm_runtime_put() almost everywhere (if not just everywhere) would be
fine with me.
I also think that the current users of pm_runtime_put_autosuspend()
that is not immediately preceded by pm_runtime_mark_last_busy() can be
readily switched over to using pm_runtime_put() instead of it and then
pm_runtime_put_autosuspend() can be made call
pm_runtime_mark_last_busy(), so the latter can be removed from the
code using the former. Note that this last step does not require
tree-wide changes, because calling pm_runtime_mark_last_busy() twice
in a row for the same device is not a problem.
Of course, the documentation needs to be updated in accordance with
the code changes, which didn't happen when previous changes were made
to pm_runtime_put() and that likely is why it does not reflect the
current code.
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2024-10-09 13:34 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-04 9:41 [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend() Sakari Ailus
2024-10-04 9:41 ` [PATCH 06/51] crypto: " Sakari Ailus
2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
2024-10-07 18:49 ` Laurent Pinchart
2024-10-07 22:08 ` Ulf Hansson
2024-10-07 22:25 ` Laurent Pinchart
2024-10-07 22:34 ` Ulf Hansson
2024-10-08 18:24 ` Rafael J. Wysocki
2024-10-09 10:20 ` Rafael J. Wysocki
2024-10-09 10:27 ` Ulf Hansson
2024-10-09 12:48 ` Richard Fitzgerald
2024-10-09 13:34 ` Rafael J. Wysocki
2024-10-08 20:38 ` Uwe Kleine-König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox