From: Tycho Andersen <tycho@kernel.org>
To: Thomas Gleixner <tglx@kernel.org>, Ingo Molnar <mingo@redhat.com>,
Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Ashish Kalra <ashish.kalra@amd.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
John Allen <john.allen@amd.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
"David S. Miller" <davem@davemloft.net>,
Ard Biesheuvel <ardb@kernel.org>,
Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>,
Kishon Vijay Abraham I <kvijayab@amd.com>,
Alexey Kardashevskiy <aik@amd.com>,
Nikunj A Dadhania <nikunj@amd.com>,
"Peter Zijlstra (Intel)" <peterz@infradead.org>,
Kim Phillips <kim.phillips@amd.com>,
Sean Christopherson <seanjc@google.com>
Cc: linux-kernel@vger.kernel.org, linux-crypto@vger.kernel.org,
"Tycho Andersen (AMD)" <tycho@kernel.org>
Subject: [PATCH v4 6/7] crypto/ccp: Implement SNP x86 shutdown
Date: Tue, 24 Mar 2026 10:13:00 -0600 [thread overview]
Message-ID: <20260324161301.1353976-7-tycho@kernel.org> (raw)
In-Reply-To: <20260324161301.1353976-1-tycho@kernel.org>
From: "Tycho Andersen (AMD)" <tycho@kernel.org>
The SEV firmware has support to disable SNP during an SNP_SHUTDOWN_EX
command. Verify that this support is available and set the flag so that SNP
is disabled when it is not being used. In cases where SNP is disabled, skip
the call to amd_iommu_snp_disable(), as all of the IOMMU pages have already
been made shared. Also skip the panic case, since snp_shutdown() does
IPIs.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
---
drivers/crypto/ccp/sev-dev.c | 41 +++++++++++++++++++++---------------
include/linux/psp-sev.h | 5 ++++-
2 files changed, 28 insertions(+), 18 deletions(-)
diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
index 47cb8fca4e6c..366303ff6466 100644
--- a/drivers/crypto/ccp/sev-dev.c
+++ b/drivers/crypto/ccp/sev-dev.c
@@ -2039,6 +2039,8 @@ static int __sev_snp_shutdown_locked(int *error, bool panic)
memset(&data, 0, sizeof(data));
data.len = sizeof(data);
data.iommu_snp_shutdown = 1;
+ if (sev->snp_feat_info_0.ecx & SNP_X86_SHUTDOWN_SUPPORTED)
+ data.x86_snp_shutdown = 1;
/*
* If invoked during panic handling, local interrupts are disabled
@@ -2072,23 +2074,28 @@ static int __sev_snp_shutdown_locked(int *error, bool panic)
return ret;
}
- /*
- * SNP_SHUTDOWN_EX with IOMMU_SNP_SHUTDOWN set to 1 disables SNP
- * enforcement by the IOMMU and also transitions all pages
- * associated with the IOMMU to the Reclaim state.
- * Firmware was transitioning the IOMMU pages to Hypervisor state
- * before version 1.53. But, accounting for the number of assigned
- * 4kB pages in a 2M page was done incorrectly by not transitioning
- * to the Reclaim state. This resulted in RMP #PF when later accessing
- * the 2M page containing those pages during kexec boot. Hence, the
- * firmware now transitions these pages to Reclaim state and hypervisor
- * needs to transition these pages to shared state. SNP Firmware
- * version 1.53 and above are needed for kexec boot.
- */
- ret = amd_iommu_snp_disable();
- if (ret) {
- dev_err(sev->dev, "SNP IOMMU shutdown failed\n");
- return ret;
+ if (data.x86_snp_shutdown) {
+ if (!panic)
+ snp_shutdown();
+ } else {
+ /*
+ * SNP_SHUTDOWN_EX with IOMMU_SNP_SHUTDOWN set to 1 disables SNP
+ * enforcement by the IOMMU and also transitions all pages
+ * associated with the IOMMU to the Reclaim state.
+ * Firmware was transitioning the IOMMU pages to Hypervisor state
+ * before version 1.53. But, accounting for the number of assigned
+ * 4kB pages in a 2M page was done incorrectly by not transitioning
+ * to the Reclaim state. This resulted in RMP #PF when later accessing
+ * the 2M page containing those pages during kexec boot. Hence, the
+ * firmware now transitions these pages to Reclaim state and hypervisor
+ * needs to transition these pages to shared state. SNP Firmware
+ * version 1.53 and above are needed for kexec boot.
+ */
+ ret = amd_iommu_snp_disable();
+ if (ret) {
+ dev_err(sev->dev, "SNP IOMMU shutdown failed\n");
+ return ret;
+ }
}
snp_leak_hv_fixed_pages();
diff --git a/include/linux/psp-sev.h b/include/linux/psp-sev.h
index 69ffa4b4d1fa..d5099a2baca5 100644
--- a/include/linux/psp-sev.h
+++ b/include/linux/psp-sev.h
@@ -829,12 +829,14 @@ struct sev_data_range_list {
*
* @len: length of the command buffer read by the PSP
* @iommu_snp_shutdown: Disable enforcement of SNP in the IOMMU
+ * @x86_snp_shutdown: Disable SNP on all cores
* @rsvd1: reserved
*/
struct sev_data_snp_shutdown_ex {
u32 len;
u32 iommu_snp_shutdown:1;
- u32 rsvd1:31;
+ u32 x86_snp_shutdown:1;
+ u32 rsvd1:30;
} __packed;
/**
@@ -891,6 +893,7 @@ struct snp_feature_info {
} __packed;
/* Feature bits in ECX */
+#define SNP_X86_SHUTDOWN_SUPPORTED BIT(1)
#define SNP_RAPL_DISABLE_SUPPORTED BIT(2)
#define SNP_CIPHER_TEXT_HIDING_SUPPORTED BIT(3)
#define SNP_AES_256_XTS_POLICY_SUPPORTED BIT(4)
--
2.53.0
next prev parent reply other threads:[~2026-03-24 16:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 16:12 [PATCH v4 0/7] Move SNP initialization to the CCP driver Tycho Andersen
2026-03-24 16:12 ` [PATCH v4 1/7] x86/sev: Create a function to clear/zero the RMP Tycho Andersen
2026-03-24 16:12 ` [PATCH v4 2/7] x86/sev: Create snp_prepare() Tycho Andersen
2026-03-24 16:12 ` [PATCH v4 3/7] x86/sev: Create snp_shutdown() Tycho Andersen
2026-03-24 16:12 ` [PATCH v4 4/7] x86/sev, crypto/ccp: Move SNP init to ccp driver Tycho Andersen
2026-03-24 16:12 ` [PATCH v4 5/7] x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/ Tycho Andersen
2026-03-24 16:13 ` Tycho Andersen [this message]
2026-03-24 16:13 ` [PATCH v4 7/7] crypto/ccp: Update HV_FIXED page states to allow freeing of memory Tycho Andersen
2026-03-25 9:07 ` [PATCH v4 0/7] Move SNP initialization to the CCP driver Borislav Petkov
2026-03-25 15:25 ` Tycho Andersen
2026-03-28 11:38 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260324161301.1353976-7-tycho@kernel.org \
--to=tycho@kernel.org \
--cc=Neeraj.Upadhyay@amd.com \
--cc=aik@amd.com \
--cc=ardb@kernel.org \
--cc=ashish.kalra@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=hpa@zytor.com \
--cc=john.allen@amd.com \
--cc=kim.phillips@amd.com \
--cc=kvijayab@amd.com \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=nikunj@amd.com \
--cc=peterz@infradead.org \
--cc=seanjc@google.com \
--cc=tglx@kernel.org \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox