From: Eric Biggers <ebiggers@kernel.org>
To: Herbert Xu <herbert@gondor.apana.org.au>, linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Eric Biggers <ebiggers@kernel.org>
Subject: [PATCH v4] crypto: cryptomgr - Select algorithm types only when CRYPTO_SELFTESTS
Date: Fri, 27 Mar 2026 16:08:18 -0700 [thread overview]
Message-ID: <20260327230818.140264-1-ebiggers@kernel.org> (raw)
Enabling any template selects CRYPTO_MANAGER, which causes
CRYPTO_MANAGER2 to enable itself, which selects every algorithm type
option. However, pulling in all algorithm types is needed only when the
self-tests are enabled. So condition the selections accordingly.
To make this possible, also add the missing selections to various
symbols that were relying on transitive selections via CRYPTO_MANAGER.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
---
This patch is targeting cryptodev/master
v4: addressed yet another transitive selection
v3: addressed more transitive selections
v2: add selections to options that were relying on transitive selection
crypto/Kconfig | 27 +++++++++++++++++++--------
drivers/crypto/Kconfig | 1 +
drivers/crypto/allwinner/Kconfig | 2 ++
drivers/crypto/intel/qat/Kconfig | 1 +
4 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/crypto/Kconfig b/crypto/Kconfig
index e2b4106ac961..7099f0bf2c31 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -155,23 +155,24 @@ config CRYPTO_MANAGER
This provides the support for instantiating templates such as
cbc(aes), and the support for the crypto self-tests.
config CRYPTO_MANAGER2
def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
- select CRYPTO_ACOMP2
- select CRYPTO_AEAD2
- select CRYPTO_AKCIPHER2
- select CRYPTO_SIG2
- select CRYPTO_HASH2
- select CRYPTO_KPP2
- select CRYPTO_RNG2
- select CRYPTO_SKCIPHER2
+ select CRYPTO_ACOMP2 if CRYPTO_SELFTESTS
+ select CRYPTO_AEAD2 if CRYPTO_SELFTESTS
+ select CRYPTO_AKCIPHER2 if CRYPTO_SELFTESTS
+ select CRYPTO_SIG2 if CRYPTO_SELFTESTS
+ select CRYPTO_HASH2 if CRYPTO_SELFTESTS
+ select CRYPTO_KPP2 if CRYPTO_SELFTESTS
+ select CRYPTO_RNG2 if CRYPTO_SELFTESTS
+ select CRYPTO_SKCIPHER2 if CRYPTO_SELFTESTS
config CRYPTO_USER
tristate "Userspace cryptographic algorithm configuration"
depends on NET
select CRYPTO_MANAGER
+ select CRYPTO_RNG
help
Userspace configuration for cryptographic instantiations such as
cbc(aes).
config CRYPTO_SELFTESTS
@@ -222,10 +223,11 @@ config CRYPTO_PCRYPT
This converts an arbitrary crypto algorithm into a parallel
algorithm that executes in kernel threads.
config CRYPTO_CRYPTD
tristate "Software async crypto daemon"
+ select CRYPTO_AEAD
select CRYPTO_SKCIPHER
select CRYPTO_HASH
select CRYPTO_MANAGER
help
This is a generic software asynchronous crypto daemon that
@@ -255,24 +257,33 @@ config CRYPTO_KRB5ENC
sunrpc/NFS and rxrpc/AFS.
config CRYPTO_BENCHMARK
tristate "Crypto benchmarking module"
depends on m || EXPERT
+ select CRYPTO_AEAD
+ select CRYPTO_HASH
select CRYPTO_MANAGER
+ select CRYPTO_SKCIPHER
help
Quick & dirty crypto benchmarking module.
This is mainly intended for use by people developing cryptographic
algorithms in the kernel. It should not be enabled in production
kernels.
config CRYPTO_SIMD
tristate
+ select CRYPTO_AEAD
select CRYPTO_CRYPTD
config CRYPTO_ENGINE
tristate
+ select CRYPTO_AEAD
+ select CRYPTO_AKCIPHER
+ select CRYPTO_HASH
+ select CRYPTO_KPP
+ select CRYPTO_SKCIPHER
endmenu
menu "Public-key cryptography"
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 8d3b5d2890f8..3c52e7a1df2b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -299,10 +299,11 @@ config CRYPTO_DEV_PPC4XX
select CRYPTO_AES
select CRYPTO_LIB_AES
select CRYPTO_CCM
select CRYPTO_CTR
select CRYPTO_GCM
+ select CRYPTO_RNG
select CRYPTO_SKCIPHER
help
This option allows you to have support for AMCC crypto acceleration.
config HW_RANDOM_PPC4XX
diff --git a/drivers/crypto/allwinner/Kconfig b/drivers/crypto/allwinner/Kconfig
index b8e75210a0e3..7270e5fbc573 100644
--- a/drivers/crypto/allwinner/Kconfig
+++ b/drivers/crypto/allwinner/Kconfig
@@ -12,10 +12,11 @@ config CRYPTO_DEV_SUN4I_SS
depends on CRYPTO_DEV_ALLWINNER
select CRYPTO_MD5
select CRYPTO_SHA1
select CRYPTO_AES
select CRYPTO_LIB_DES
+ select CRYPTO_RNG
select CRYPTO_SKCIPHER
help
Some Allwinner SoC have a crypto accelerator named
Security System. Select this if you want to use it.
The Security System handle AES/DES/3DES ciphers in CBC mode
@@ -47,10 +48,11 @@ config CRYPTO_DEV_SUN8I_CE
select CRYPTO_ENGINE
select CRYPTO_ECB
select CRYPTO_CBC
select CRYPTO_AES
select CRYPTO_DES
+ select CRYPTO_RNG
depends on CRYPTO_DEV_ALLWINNER
depends on PM
help
Select y here to have support for the crypto Engine available on
Allwinner SoC H2+, H3, H5, H6, R40 and A64.
diff --git a/drivers/crypto/intel/qat/Kconfig b/drivers/crypto/intel/qat/Kconfig
index 4b4861460dd4..6734b746ea70 100644
--- a/drivers/crypto/intel/qat/Kconfig
+++ b/drivers/crypto/intel/qat/Kconfig
@@ -1,8 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
config CRYPTO_DEV_QAT
tristate
+ select CRYPTO_ACOMP
select CRYPTO_AEAD
select CRYPTO_AUTHENC
select CRYPTO_SKCIPHER
select CRYPTO_AKCIPHER
select CRYPTO_DH
base-commit: be0240f65705b0b125de60d4fc952c013ef74e26
--
2.53.0
reply other threads:[~2026-03-27 23:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260327230818.140264-1-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox