Linux cryptographic layer development
 help / color / mirror / Atom feed
From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>,
	"Jason A . Donenfeld" <Jason@zx2c4.com>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	x86@kernel.org, Eric Biggers <ebiggers@kernel.org>
Subject: [PATCH 2/3] lib/crypto: x86: Opt out of initializing MXCSR and 387 state
Date: Wed,  4 Nov 2026 16:55:22 -0800	[thread overview]
Message-ID: <20261105005523.84925-3-ebiggers@kernel.org> (raw)
In-Reply-To: <20261105005523.84925-1-ebiggers@kernel.org>

The crypto code using "kernel-mode FPU" is integer code that does not
use any MMX or x87 instructions.  To the extent that float-domain
instructions are used at all, they are only moves and shuffles, neither
of which raises SIMD floating-point exceptions or depends on MXCSR.

Therefore, there's no need to initialize MXCSR or the 387 FPU state.

Opt out of this initialization by using kernel_fpu_begin_mask(0) instead
of kernel_fpu_begin().  This eliminates an 'ldmxcsr' instruction in
every kernel-mode FPU section, reducing overhead, which matters most for
short input lengths.  On 32-bit kernels it also eliminates 'fninit'.

A precedent for this optimization can be found in
commit a58db7ad80e8 ("netfilter: nft_set_pipapo_avx2: Skip LDMXCSR, we
don't need a valid MXCSR state").

Signed-off-by: Eric Biggers <ebiggers@kernel.org>
---
 lib/crypto/x86/aes.h       | 24 ++++++++++++------------
 lib/crypto/x86/blake2s.h   |  2 +-
 lib/crypto/x86/chacha.h    |  4 ++--
 lib/crypto/x86/gf128hash.h |  8 ++++----
 lib/crypto/x86/nh.h        |  2 +-
 lib/crypto/x86/poly1305.h  |  2 +-
 lib/crypto/x86/sha1.h      |  4 ++--
 lib/crypto/x86/sha256.h    |  4 ++--
 lib/crypto/x86/sha512.h    |  2 +-
 lib/crypto/x86/sm3.h       |  2 +-
 10 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/lib/crypto/x86/aes.h b/lib/crypto/x86/aes.h
index b555290ab075..01af1a522b42 100644
--- a/lib/crypto/x86/aes.h
+++ b/lib/crypto/x86/aes.h
@@ -50,7 +50,7 @@ static void aes_preparekey_arch(union aes_enckey_arch *k,
 
 	if (static_branch_likely(&have_aesni) && key_len != AES_KEYSIZE_192 &&
 	    irq_fpu_usable()) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		if (key_len == AES_KEYSIZE_128)
 			aes128_expandkey_aesni(rndkeys, inv_rndkeys, in_key);
 		else
@@ -66,7 +66,7 @@ static void aes_encrypt_arch(const struct aes_enckey *key,
 			     const u8 in[AES_BLOCK_SIZE])
 {
 	if (static_branch_likely(&have_aesni) && irq_fpu_usable()) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		aes_encrypt_aesni(out, in, key);
 		kernel_fpu_end();
 	} else {
@@ -79,7 +79,7 @@ static void aes_decrypt_arch(const struct aes_key *key,
 			     const u8 in[AES_BLOCK_SIZE])
 {
 	if (static_branch_likely(&have_aesni) && irq_fpu_usable()) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		aes_decrypt_aesni(out, in, key);
 		kernel_fpu_end();
 	} else {
@@ -101,7 +101,7 @@ static bool aes_ecb_encrypt_arch(u8 *dst, const u8 *src, size_t len,
 {
 	if (!static_branch_likely(&have_aesni) || unlikely(!irq_fpu_usable()))
 		return false;
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	aes_ecb_encrypt_aesni(dst, src, len / AES_BLOCK_SIZE, key);
 	kernel_fpu_end();
 	return true;
@@ -114,7 +114,7 @@ static bool aes_ecb_decrypt_arch(u8 *dst, const u8 *src, size_t len,
 {
 	if (!static_branch_likely(&have_aesni) || unlikely(!irq_fpu_usable()))
 		return false;
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	aes_ecb_decrypt_aesni(dst, src, len / AES_BLOCK_SIZE, key);
 	kernel_fpu_end();
 	return true;
@@ -141,7 +141,7 @@ static bool aes_cbc_encrypt_arch(u8 *dst, const u8 *src, size_t len,
 {
 	if (!static_branch_likely(&have_aesni) || unlikely(!irq_fpu_usable()))
 		return false;
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	aes_cbc_encrypt_aesni(dst, src, len / AES_BLOCK_SIZE, iv, key);
 	kernel_fpu_end();
 	return true;
@@ -155,7 +155,7 @@ static bool aes_cbc_decrypt_arch(u8 *dst, const u8 *src, size_t len,
 {
 	if (!static_branch_likely(&have_aesni) || unlikely(!irq_fpu_usable()))
 		return false;
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	aes_cbc_decrypt_aesni(dst, src, len / AES_BLOCK_SIZE, iv, key);
 	kernel_fpu_end();
 	return true;
@@ -173,7 +173,7 @@ static bool aes_cbc_cts_encrypt_arch(u8 *dst, const u8 *src, size_t len,
 	if (!static_branch_likely(&have_aesni) || unlikely(!irq_fpu_usable()))
 		return false;
 
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	if (cbc_blocks) {
 		aes_cbc_encrypt_aesni(dst, src, cbc_blocks, iv, key);
 		dst += cbc_blocks * AES_BLOCK_SIZE;
@@ -197,7 +197,7 @@ static bool aes_cbc_cts_decrypt_arch(u8 *dst, const u8 *src, size_t len,
 	if (!static_branch_likely(&have_aesni) || unlikely(!irq_fpu_usable()))
 		return false;
 
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	if (cbc_blocks) {
 		aes_cbc_decrypt_aesni(dst, src, cbc_blocks, iv, key);
 		dst += cbc_blocks * AES_BLOCK_SIZE;
@@ -260,7 +260,7 @@ static bool aes_ctr_arch(u8 *dst, const u8 *src, size_t len,
 	ctr64 = le_ctr[0] = get_unaligned_be64(&ctr[8]);
 	le_ctr[1] = get_unaligned_be64(&ctr[0]);
 
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 
 	nblocks = DIV_ROUND_UP(len, AES_BLOCK_SIZE);
 	ctr64 += nblocks;
@@ -296,7 +296,7 @@ static bool aes_xctr_arch(u8 *dst, const u8 *src, size_t len, u64 ctr,
 	if (!static_branch_likely(&have_aesni_avx) ||
 	    unlikely(!irq_fpu_usable()))
 		return false;
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	if (static_branch_likely(&have_vaes_avx512))
 		aes_xctr_crypt_vaes_avx512(dst, src, len, ctr, iv, key);
 	else if (static_branch_likely(&have_vaes_avx2))
@@ -344,7 +344,7 @@ aes_xts_crypt_x86(u8 *dst, const u8 *src, size_t len, u8 tweak[AES_BLOCK_SIZE],
 	if (!static_branch_likely(&have_aesni) || unlikely(!irq_fpu_usable()))
 		return false;
 
-	kernel_fpu_begin();
+	kernel_fpu_begin_mask(0);
 	if (IS_ENABLED(CONFIG_X86_64) &&
 	    static_branch_likely(&have_vaes_avx512)) {
 		if (!cont)
diff --git a/lib/crypto/x86/blake2s.h b/lib/crypto/x86/blake2s.h
index 0f7c51f055c8..952db559eed3 100644
--- a/lib/crypto/x86/blake2s.h
+++ b/lib/crypto/x86/blake2s.h
@@ -34,7 +34,7 @@ static void blake2s_compress(struct blake2s_ctx *ctx,
 		const size_t blocks = min_t(size_t, nblocks,
 					    SZ_4K / BLAKE2S_BLOCK_SIZE);
 
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		if (static_branch_likely(&blake2s_use_avx512))
 			blake2s_compress_avx512(ctx, data, blocks, inc);
 		else
diff --git a/lib/crypto/x86/chacha.h b/lib/crypto/x86/chacha.h
index fdf01b07742e..3bbfd21255de 100644
--- a/lib/crypto/x86/chacha.h
+++ b/lib/crypto/x86/chacha.h
@@ -152,7 +152,7 @@ static void hchacha_block_arch(const struct chacha_state *state,
 	if (!static_branch_likely(&chacha_use_simd)) {
 		hchacha_block_generic(state, out, nrounds);
 	} else {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		hchacha_block_ssse3(state, out, nrounds);
 		kernel_fpu_end();
 	}
@@ -168,7 +168,7 @@ static void chacha_crypt_arch(struct chacha_state *state, u8 *dst,
 	do {
 		size_t todo = min(bytes, SZ_4K);
 
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		chacha_dosimd(state, dst, src, todo, nrounds);
 		kernel_fpu_end();
 
diff --git a/lib/crypto/x86/gf128hash.h b/lib/crypto/x86/gf128hash.h
index 6b79b06caab0..5ef8f2f7b6f3 100644
--- a/lib/crypto/x86/gf128hash.h
+++ b/lib/crypto/x86/gf128hash.h
@@ -31,7 +31,7 @@ static void polyval_preparekey_arch(struct polyval_key *key,
 	static_assert(ARRAY_SIZE(key->h_powers) == NUM_H_POWERS);
 	memcpy(&key->h_powers[NUM_H_POWERS - 1], raw_key, POLYVAL_BLOCK_SIZE);
 	if (static_branch_likely(&have_pclmul_avx) && irq_fpu_usable()) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		for (int i = NUM_H_POWERS - 2; i >= 0; i--) {
 			key->h_powers[i] = key->h_powers[i + 1];
 			polyval_mul_pclmul_avx(
@@ -52,7 +52,7 @@ static void polyval_mul_x86(struct polyval_elem *a,
 			    const struct polyval_elem *b)
 {
 	if (static_branch_likely(&have_pclmul) && irq_fpu_usable()) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		if (static_branch_likely(&have_pclmul_avx))
 			polyval_mul_pclmul_avx(a, b);
 		else
@@ -88,7 +88,7 @@ static void ghash_blocks_arch(struct polyval_elem *acc,
 			size_t n = min_t(size_t, nblocks,
 					 4096 / GHASH_BLOCK_SIZE);
 
-			kernel_fpu_begin();
+			kernel_fpu_begin_mask(0);
 			ghash_blocks_pclmul(acc, &key->h, data, n);
 			kernel_fpu_end();
 			data += n * GHASH_BLOCK_SIZE;
@@ -110,7 +110,7 @@ static void polyval_blocks_arch(struct polyval_elem *acc,
 			size_t n = min_t(size_t, nblocks,
 					 4096 / POLYVAL_BLOCK_SIZE);
 
-			kernel_fpu_begin();
+			kernel_fpu_begin_mask(0);
 			polyval_blocks_pclmul_avx(acc, key, data, n);
 			kernel_fpu_end();
 			data += n * POLYVAL_BLOCK_SIZE;
diff --git a/lib/crypto/x86/nh.h b/lib/crypto/x86/nh.h
index 342636dcb750..e41512e5b4bb 100644
--- a/lib/crypto/x86/nh.h
+++ b/lib/crypto/x86/nh.h
@@ -21,7 +21,7 @@ static bool nh_arch(const u32 *key, const u8 *message, size_t message_len,
 {
 	if (message_len >= 64 && static_branch_likely(&have_sse2) &&
 	    irq_fpu_usable()) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		if (static_branch_likely(&have_avx2))
 			nh_avx2(key, message, message_len, hash);
 		else
diff --git a/lib/crypto/x86/poly1305.h b/lib/crypto/x86/poly1305.h
index a2034809b97b..3b92e20f4f9b 100644
--- a/lib/crypto/x86/poly1305.h
+++ b/lib/crypto/x86/poly1305.h
@@ -117,7 +117,7 @@ static void poly1305_blocks(struct poly1305_block_state *state, const u8 *inp,
 	do {
 		const size_t bytes = min(len, SZ_4K);
 
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		if (static_branch_likely(&poly1305_use_avx512))
 			poly1305_blocks_avx512(ctx, inp, bytes, padbit);
 		else if (static_branch_likely(&poly1305_use_avx2))
diff --git a/lib/crypto/x86/sha1.h b/lib/crypto/x86/sha1.h
index 6aff433466e7..9de5f388055e 100644
--- a/lib/crypto/x86/sha1.h
+++ b/lib/crypto/x86/sha1.h
@@ -16,7 +16,7 @@ DEFINE_STATIC_CALL(sha1_blocks_x86, sha1_blocks_generic);
 			 const u8 *data, size_t nblocks)           \
 	{                                                          \
 		if (likely(irq_fpu_usable())) {                    \
-			kernel_fpu_begin();                        \
+			kernel_fpu_begin_mask(0);                  \
 			asm_fn(state, data, nblocks);              \
 			kernel_fpu_end();                          \
 		} else {                                           \
@@ -36,7 +36,7 @@ static void sha1_blocks_avx2(struct sha1_block_state *state,
 			     const u8 *data, size_t nblocks)
 {
 	if (likely(irq_fpu_usable())) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		/* Select the optimal transform based on the number of blocks */
 		if (nblocks >= SHA1_AVX2_BLOCK_OPTSIZE)
 			sha1_transform_avx2(state, data, nblocks);
diff --git a/lib/crypto/x86/sha256.h b/lib/crypto/x86/sha256.h
index e98ffdaf4b14..72bce769aa92 100644
--- a/lib/crypto/x86/sha256.h
+++ b/lib/crypto/x86/sha256.h
@@ -18,7 +18,7 @@ DEFINE_STATIC_CALL(sha256_blocks_x86, sha256_blocks_generic);
 			 size_t nblocks)                                   \
 	{                                                                  \
 		if (likely(irq_fpu_usable())) {                            \
-			kernel_fpu_begin();                                \
+			kernel_fpu_begin_mask(0);                          \
 			asm_fn(state, data, nblocks);                      \
 			kernel_fpu_end();                                  \
 		} else {                                                   \
@@ -79,7 +79,7 @@ static bool sha256_finup_2x_arch(const struct __sha256_ctx *ctx,
 	 */
 	if (static_branch_likely(&have_sha_ni) && len >= SHA256_BLOCK_SIZE &&
 	    len <= 65536 && likely(irq_fpu_usable())) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		sha256_ni_finup2x(ctx, data1, data2, len, out1, out2);
 		kernel_fpu_end();
 		kmsan_unpoison_memory(out1, SHA256_DIGEST_SIZE);
diff --git a/lib/crypto/x86/sha512.h b/lib/crypto/x86/sha512.h
index 4e177b4606bd..d16be7c03a41 100644
--- a/lib/crypto/x86/sha512.h
+++ b/lib/crypto/x86/sha512.h
@@ -16,7 +16,7 @@ DEFINE_STATIC_CALL(sha512_blocks_x86, sha512_blocks_generic);
 			 size_t nblocks)                                   \
 	{                                                                  \
 		if (likely(irq_fpu_usable())) {                            \
-			kernel_fpu_begin();                                \
+			kernel_fpu_begin_mask(0);                          \
 			asm_fn(state, data, nblocks);                      \
 			kernel_fpu_end();                                  \
 		} else {                                                   \
diff --git a/lib/crypto/x86/sm3.h b/lib/crypto/x86/sm3.h
index e06d4a22e4fa..493887838888 100644
--- a/lib/crypto/x86/sm3.h
+++ b/lib/crypto/x86/sm3.h
@@ -14,7 +14,7 @@ static void sm3_blocks_avx(struct sm3_block_state *state,
 			   const u8 *data, size_t nblocks)
 {
 	if (likely(irq_fpu_usable())) {
-		kernel_fpu_begin();
+		kernel_fpu_begin_mask(0);
 		sm3_transform_avx(state, data, nblocks);
 		kernel_fpu_end();
 	} else {
-- 
2.56.0


  parent reply	other threads:[~2026-11-05  0:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-05  0:55 [PATCH 0/3] crc, crypto: Opt out of initializing MXCSR and 387 state Eric Biggers
2026-11-05  0:55 ` [PATCH 1/3] lib/crc: x86: " Eric Biggers
2026-11-05  0:55 ` Eric Biggers [this message]
2026-11-05  0:55 ` [PATCH 3/3] crypto: x86 - " Eric Biggers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261105005523.84925-3-ebiggers@kernel.org \
    --to=ebiggers@kernel.org \
    --cc=Jason@zx2c4.com \
    --cc=ardb@kernel.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-crypto@vger.kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox