From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>,
"Jason A . Donenfeld" <Jason@zx2c4.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Eric Biggers <ebiggers@kernel.org>
Subject: [PATCH 7/7] lib/crypto: tests: Add KUnit test suite for AES-XTS
Date: Sun, 15 Nov 2026 22:28:49 -0800 [thread overview]
Message-ID: <20261116062849.1071038-8-ebiggers@kernel.org> (raw)
In-Reply-To: <20261116062849.1071038-1-ebiggers@kernel.org>
Add a KUnit test suite for the AES-XTS library API.
It consists of:
- All the shared test cases from skcipher-test-template.h. These
include extensive consistency tests, a "Monte-Carlo test", and a
benchmark.
- Tests against hardcoded AES-XTS test vectors from IEEE 1619-2007,
including ciphertext stealing test vectors.
- A test for weak key rejection (keys whose two halves are identical).
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
---
lib/crypto/.kunitconfig | 1 +
lib/crypto/tests/Kconfig | 9 +
lib/crypto/tests/Makefile | 1 +
lib/crypto/tests/aes_xts_kunit.c | 365 +++++++++++++++++++++++++++++++
4 files changed, 376 insertions(+)
create mode 100644 lib/crypto/tests/aes_xts_kunit.c
diff --git a/lib/crypto/.kunitconfig b/lib/crypto/.kunitconfig
index 465375a1a14c..1be91698a654 100644
--- a/lib/crypto/.kunitconfig
+++ b/lib/crypto/.kunitconfig
@@ -8,6 +8,7 @@ CONFIG_CRYPTO_LIB_AES_CCM_KUNIT_TEST=y
CONFIG_CRYPTO_LIB_AES_CTR_KUNIT_TEST=y
CONFIG_CRYPTO_LIB_AES_ECB_KUNIT_TEST=y
CONFIG_CRYPTO_LIB_AES_GCM_KUNIT_TEST=y
+CONFIG_CRYPTO_LIB_AES_XTS_KUNIT_TEST=y
CONFIG_CRYPTO_LIB_BLAKE2B_KUNIT_TEST=y
CONFIG_CRYPTO_LIB_BLAKE2S_KUNIT_TEST=y
CONFIG_CRYPTO_LIB_CHACHA_KUNIT_TEST=y
diff --git a/lib/crypto/tests/Kconfig b/lib/crypto/tests/Kconfig
index 4f7a07b0e3c0..98fcf053e937 100644
--- a/lib/crypto/tests/Kconfig
+++ b/lib/crypto/tests/Kconfig
@@ -54,6 +54,15 @@ config CRYPTO_LIB_AES_GCM_KUNIT_TEST
help
KUnit tests for the AES-GCM authenticated encryption algorithm.
+config CRYPTO_LIB_AES_XTS_KUNIT_TEST
+ tristate "KUnit tests for AES-XTS" if !KUNIT_ALL_TESTS
+ depends on KUNIT && CRYPTO_LIB_AES_XTS
+ default KUNIT_ALL_TESTS
+ select CRYPTO_LIB_BENCHMARK_VISIBLE
+ # This test uses BLAKE2s, but that's always built-in.
+ help
+ KUnit tests for the AES-XTS encryption mode.
+
config CRYPTO_LIB_BLAKE2B_KUNIT_TEST
tristate "KUnit tests for BLAKE2b" if !KUNIT_ALL_TESTS
depends on KUNIT && CRYPTO_LIB_BLAKE2B
diff --git a/lib/crypto/tests/Makefile b/lib/crypto/tests/Makefile
index 50e4a3f70ebf..048ceb1d595d 100644
--- a/lib/crypto/tests/Makefile
+++ b/lib/crypto/tests/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_CRYPTO_LIB_AES_CCM_KUNIT_TEST) += aes_ccm_kunit.o
obj-$(CONFIG_CRYPTO_LIB_AES_CTR_KUNIT_TEST) += aes_ctr_kunit.o aes_xctr_kunit.o
obj-$(CONFIG_CRYPTO_LIB_AES_ECB_KUNIT_TEST) += aes_ecb_kunit.o
obj-$(CONFIG_CRYPTO_LIB_AES_GCM_KUNIT_TEST) += aes_gcm_kunit.o
+obj-$(CONFIG_CRYPTO_LIB_AES_XTS_KUNIT_TEST) += aes_xts_kunit.o
obj-$(CONFIG_CRYPTO_LIB_BLAKE2B_KUNIT_TEST) += blake2b_kunit.o
obj-$(CONFIG_CRYPTO_LIB_BLAKE2S_KUNIT_TEST) += blake2s_kunit.o
obj-$(CONFIG_CRYPTO_LIB_CHACHA_KUNIT_TEST) += chacha_kunit.o
diff --git a/lib/crypto/tests/aes_xts_kunit.c b/lib/crypto/tests/aes_xts_kunit.c
new file mode 100644
index 000000000000..b45741567d2f
--- /dev/null
+++ b/lib/crypto/tests/aes_xts_kunit.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * KUnit test suite for AES-XTS
+ *
+ * Copyright 2026 Google LLC
+ */
+#include <crypto/aes-xts.h>
+#include <crypto/blake2s.h>
+#include <linux/fips.h>
+#include "test-utils.h"
+
+static int aes_xts_preparekey_test(struct aes_xts_key *key, const u8 *in_key,
+ size_t key_len)
+{
+ return aes_xts_preparekey(key, in_key, key_len, 0);
+}
+
+/* In FIPS mode, AES-192-XTS (48-byte keys) isn't allowed. */
+static bool aes_xts_is_key_len_allowed(size_t key_len)
+{
+ return !fips_enabled || key_len != 2 * AES_KEYSIZE_192;
+}
+
+static const size_t aes_xts_valid_key_lens[] = { 2 * AES_KEYSIZE_128,
+ 2 * AES_KEYSIZE_192,
+ 2 * AES_KEYSIZE_256 };
+#define SKCIPHER_VALID_KEY_LENS aes_xts_valid_key_lens
+#define SKCIPHER_MAX_KEY_LEN (2 * AES_MAX_KEY_SIZE)
+#define SKCIPHER_IV_LEN AES_BLOCK_SIZE /* the tweak */
+#define SKCIPHER_MIN_DATA_LEN AES_BLOCK_SIZE
+#define SKCIPHER_DATA_LEN_ALIGN 1
+
+#define SKCIPHER_KEY aes_xts_key
+#define SKCIPHER_PREPAREKEY aes_xts_preparekey_test
+#define SKCIPHER_ENCRYPT aes_xts_encrypt
+#define SKCIPHER_DECRYPT aes_xts_decrypt
+
+#define SKCIPHER_IS_KEY_LEN_ALLOWED aes_xts_is_key_len_allowed
+#define SKCIPHER_INCREMENTAL
+#define SKCIPHER_NONFINAL_DATA_LEN_ALIGN AES_BLOCK_SIZE
+
+/* This value was generated by gen-skcipher-testvecs.py. */
+static const u8 aes_xts_monte_carlo_checksum[BLAKE2S_HASH_SIZE] = {
+ 0x24, 0x93, 0x8f, 0x89, 0x72, 0x6f, 0xfb, 0x59, 0x4a, 0xea, 0x32,
+ 0x74, 0x15, 0x6a, 0x8f, 0x9a, 0xba, 0xde, 0x9e, 0xc3, 0x5c, 0x58,
+ 0x98, 0xa9, 0xb6, 0x9f, 0xeb, 0xe5, 0xfb, 0x3a, 0xf0, 0x87,
+};
+#define SKCIPHER_MONTE_CARLO_CHECKSUM aes_xts_monte_carlo_checksum
+
+#include "skcipher-test-template.h"
+
+/* Byte sequence 0x00..0xff, used in IEEE 1619-2007 Vector 10 */
+#define IEEE1619_SEQ256 \
+ "\x00\x01\x02\x03\x04\x05\x06\x07" \
+ "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" \
+ "\x10\x11\x12\x13\x14\x15\x16\x17" \
+ "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" \
+ "\x20\x21\x22\x23\x24\x25\x26\x27" \
+ "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" \
+ "\x30\x31\x32\x33\x34\x35\x36\x37" \
+ "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" \
+ "\x40\x41\x42\x43\x44\x45\x46\x47" \
+ "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" \
+ "\x50\x51\x52\x53\x54\x55\x56\x57" \
+ "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" \
+ "\x60\x61\x62\x63\x64\x65\x66\x67" \
+ "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" \
+ "\x70\x71\x72\x73\x74\x75\x76\x77" \
+ "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" \
+ "\x80\x81\x82\x83\x84\x85\x86\x87" \
+ "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" \
+ "\x90\x91\x92\x93\x94\x95\x96\x97" \
+ "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" \
+ "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" \
+ "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" \
+ "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" \
+ "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" \
+ "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" \
+ "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" \
+ "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" \
+ "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" \
+ "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" \
+ "\xe8\xe9\xea\xeb\xec\xed\xee\xef" \
+ "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" \
+ "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff"
+
+/* Inputs shared by IEEE 1619-2007 Vectors 15-17 */
+#define IEEE1619_VEC15_KEY \
+ "\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8" \
+ "\xf7\xf6\xf5\xf4\xf3\xf2\xf1\xf0" \
+ "\xbf\xbe\xbd\xbc\xbb\xba\xb9\xb8" \
+ "\xb7\xb6\xb5\xb4\xb3\xb2\xb1\xb0"
+#define IEEE1619_VEC15_TWEAK \
+ "\x9a\x78\x56\x34\x12\x00\x00\x00" \
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+#define IEEE1619_VEC15_PTEXT \
+ "\x00\x01\x02\x03\x04\x05\x06\x07" \
+ "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" \
+ "\x10\x11\x12"
+
+/*
+ * AES-XTS test vectors from IEEE Std 1619-2007. Vector 10 covers AES-256-XTS
+ * with a 512-byte data unit, and Vectors 15-17 cover ciphertext stealing.
+ */
+static const struct skcipher_testvec aes_xts_testvecs[] = {
+ {
+ .name = "IEEE 1619-2007 Vector 1",
+ .key = "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00",
+ .key_len = 32,
+ .iv = "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00",
+ .ptext = "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00",
+ .ctext = "\x91\x7c\xf6\x9e\xbd\x68\xb2\xec"
+ "\x9b\x9f\xe9\xa3\xea\xdd\xa6\x92"
+ "\xcd\x43\xd2\xf5\x95\x98\xed\x85"
+ "\x8c\x02\xc2\x65\x2f\xbf\x92\x2e",
+ .data_len = 32,
+ .next_iv = "\x98\xa5\x2f\x51\xbf\x2b\xb2\xec"
+ "\x20\x32\xe9\x67\x29\xd3\xac\xb8",
+ },
+ {
+ .name = "IEEE 1619-2007 Vector 2",
+ .key = "\x11\x11\x11\x11\x11\x11\x11\x11"
+ "\x11\x11\x11\x11\x11\x11\x11\x11"
+ "\x22\x22\x22\x22\x22\x22\x22\x22"
+ "\x22\x22\x22\x22\x22\x22\x22\x22",
+ .key_len = 32,
+ .iv = "\x33\x33\x33\x33\x33\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00",
+ .ptext = "\x44\x44\x44\x44\x44\x44\x44\x44"
+ "\x44\x44\x44\x44\x44\x44\x44\x44"
+ "\x44\x44\x44\x44\x44\x44\x44\x44"
+ "\x44\x44\x44\x44\x44\x44\x44\x44",
+ .ctext = "\xc4\x54\x18\x5e\x6a\x16\x93\x6e"
+ "\x39\x33\x40\x38\xac\xef\x83\x8b"
+ "\xfb\x18\x6f\xff\x74\x80\xad\xc4"
+ "\x28\x93\x82\xec\xd6\xd3\x94\xf0",
+ .data_len = 32,
+ .next_iv = "\xf2\x01\xee\x34\x37\xfc\x49\xcf"
+ "\xd6\x61\x05\x7d\x66\x55\x37\x9b",
+ },
+ {
+ .name = "IEEE 1619-2007 Vector 10",
+ .key = "\x27\x18\x28\x18\x28\x45\x90\x45"
+ "\x23\x53\x60\x28\x74\x71\x35\x26"
+ "\x62\x49\x77\x57\x24\x70\x93\x69"
+ "\x99\x59\x57\x49\x66\x96\x76\x27"
+ "\x31\x41\x59\x26\x53\x58\x97\x93"
+ "\x23\x84\x62\x64\x33\x83\x27\x95"
+ "\x02\x88\x41\x97\x16\x93\x99\x37"
+ "\x51\x05\x82\x09\x74\x94\x45\x92",
+ .key_len = 64,
+ .iv = "\xff\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00",
+ .ptext = IEEE1619_SEQ256 IEEE1619_SEQ256,
+ .ctext = "\x1c\x3b\x3a\x10\x2f\x77\x03\x86"
+ "\xe4\x83\x6c\x99\xe3\x70\xcf\x9b"
+ "\xea\x00\x80\x3f\x5e\x48\x23\x57"
+ "\xa4\xae\x12\xd4\x14\xa3\xe6\x3b"
+ "\x5d\x31\xe2\x76\xf8\xfe\x4a\x8d"
+ "\x66\xb3\x17\xf9\xac\x68\x3f\x44"
+ "\x68\x0a\x86\xac\x35\xad\xfc\x33"
+ "\x45\xbe\xfe\xcb\x4b\xb1\x88\xfd"
+ "\x57\x76\x92\x6c\x49\xa3\x09\x5e"
+ "\xb1\x08\xfd\x10\x98\xba\xec\x70"
+ "\xaa\xa6\x69\x99\xa7\x2a\x82\xf2"
+ "\x7d\x84\x8b\x21\xd4\xa7\x41\xb0"
+ "\xc5\xcd\x4d\x5f\xff\x9d\xac\x89"
+ "\xae\xba\x12\x29\x61\xd0\x3a\x75"
+ "\x71\x23\xe9\x87\x0f\x8a\xcf\x10"
+ "\x00\x02\x08\x87\x89\x14\x29\xca"
+ "\x2a\x3e\x7a\x7d\x7d\xf7\xb1\x03"
+ "\x55\x16\x5c\x8b\x9a\x6d\x0a\x7d"
+ "\xe8\xb0\x62\xc4\x50\x0d\xc4\xcd"
+ "\x12\x0c\x0f\x74\x18\xda\xe3\xd0"
+ "\xb5\x78\x1c\x34\x80\x3f\xa7\x54"
+ "\x21\xc7\x90\xdf\xe1\xde\x18\x34"
+ "\xf2\x80\xd7\x66\x7b\x32\x7f\x6c"
+ "\x8c\xd7\x55\x7e\x12\xac\x3a\x0f"
+ "\x93\xec\x05\xc5\x2e\x04\x93\xef"
+ "\x31\xa1\x2d\x3d\x92\x60\xf7\x9a"
+ "\x28\x9d\x6a\x37\x9b\xc7\x0c\x50"
+ "\x84\x14\x73\xd1\xa8\xcc\x81\xec"
+ "\x58\x3e\x96\x45\xe0\x7b\x8d\x96"
+ "\x70\x65\x5b\xa5\xbb\xcf\xec\xc6"
+ "\xdc\x39\x66\x38\x0a\xd8\xfe\xcb"
+ "\x17\xb6\xba\x02\x46\x9a\x02\x0a"
+ "\x84\xe1\x8e\x8f\x84\x25\x20\x70"
+ "\xc1\x3e\x9f\x1f\x28\x9b\xe5\x4f"
+ "\xbc\x48\x14\x57\x77\x8f\x61\x60"
+ "\x15\xe1\x32\x7a\x02\xb1\x40\xf1"
+ "\x50\x5e\xb3\x09\x32\x6d\x68\x37"
+ "\x8f\x83\x74\x59\x5c\x84\x9d\x84"
+ "\xf4\xc3\x33\xec\x44\x23\x88\x51"
+ "\x43\xcb\x47\xbd\x71\xc5\xed\xae"
+ "\x9b\xe6\x9a\x2f\xfe\xce\xb1\xbe"
+ "\xc9\xde\x24\x4f\xbe\x15\x99\x2b"
+ "\x11\xb7\x7c\x04\x0f\x12\xbd\x8f"
+ "\x6a\x97\x5a\x44\xa0\xf9\x0c\x29"
+ "\xa9\xab\xc3\xd4\xd8\x93\x92\x72"
+ "\x84\xc5\x87\x54\xcc\xe2\x94\x52"
+ "\x9f\x86\x14\xdc\xd2\xab\xa9\x91"
+ "\x92\x5f\xed\xc4\xae\x74\xff\xac"
+ "\x6e\x33\x3b\x93\xeb\x4a\xff\x04"
+ "\x79\xda\x9a\x41\x0e\x44\x50\xe0"
+ "\xdd\x7a\xe4\xc6\xe2\x91\x09\x00"
+ "\x57\x5d\xa4\x01\xfc\x07\x05\x9f"
+ "\x64\x5e\x8b\x7e\x9b\xfd\xef\x33"
+ "\x94\x30\x54\xff\x84\x01\x14\x93"
+ "\xc2\x7b\x34\x29\xea\xed\xb4\xed"
+ "\x53\x76\x44\x1a\x77\xed\x43\x85"
+ "\x1a\xd7\x7f\x16\xf5\x41\xdf\xd2"
+ "\x69\xd5\x0d\x6a\x5f\x14\xfb\x0a"
+ "\xab\x1c\xbb\x4c\x15\x50\xbe\x97"
+ "\xf7\xab\x40\x66\x19\x3c\x4c\xaa"
+ "\x77\x3d\xad\x38\x01\x4b\xd2\x09"
+ "\x2f\xa7\x55\xc8\x24\xbb\x5e\x54"
+ "\xc4\xf3\x6f\xfd\xa9\xfc\xea\x70"
+ "\xb9\xc6\xe6\x93\xe1\x48\xc1\x51",
+ .data_len = 512,
+ .next_iv = "\xd7\xcf\x75\x24\x5c\x26\x75\x77"
+ "\xa9\x0c\xaa\xd6\xae\x98\x8e\x22",
+ },
+ {
+ .name = "IEEE 1619-2007 Vector 15",
+ .key = IEEE1619_VEC15_KEY,
+ .key_len = 32,
+ .iv = IEEE1619_VEC15_TWEAK,
+ .ptext = IEEE1619_VEC15_PTEXT,
+ .ctext = "\x6c\x16\x25\xdb\x46\x71\x52\x2d"
+ "\x3d\x75\x99\x60\x1d\xe7\xca\x09"
+ "\xed",
+ .data_len = 17,
+ },
+ {
+ .name = "IEEE 1619-2007 Vector 16",
+ .key = IEEE1619_VEC15_KEY,
+ .key_len = 32,
+ .iv = IEEE1619_VEC15_TWEAK,
+ .ptext = IEEE1619_VEC15_PTEXT,
+ .ctext = "\xd0\x69\x44\x4b\x7a\x7e\x0c\xab"
+ "\x09\xe2\x44\x47\xd2\x4d\xeb\x1f"
+ "\xed\xbf",
+ .data_len = 18,
+ },
+ {
+ .name = "IEEE 1619-2007 Vector 17",
+ .key = IEEE1619_VEC15_KEY,
+ .key_len = 32,
+ .iv = IEEE1619_VEC15_TWEAK,
+ .ptext = IEEE1619_VEC15_PTEXT,
+ .ctext = "\xe5\xdf\x13\x51\xc0\x54\x4b\xa1"
+ "\x35\x0b\x33\x63\xcd\x8e\xf4\xbe"
+ "\xed\xbf\x9d",
+ .data_len = 19,
+ },
+};
+
+static void test_aes_xts_test_vectors(struct kunit *test)
+{
+ for (size_t i = 0; i < ARRAY_SIZE(aes_xts_testvecs); i++) {
+ const struct skcipher_testvec *tv = &aes_xts_testvecs[i];
+ const size_t half = tv->key_len / 2;
+
+ /*
+ * In FIPS mode, keys whose two halves are the same are
+ * rejected, so skip any test vectors that use such keys.
+ */
+ if (fips_enabled && memcmp(tv->key, &tv->key[half], half) == 0)
+ continue;
+ skcipher_run_testvecs(test, tv, 1);
+ }
+}
+
+/*
+ * Test that keys whose two halves are the same are rejected when
+ * XTS_FORBID_WEAK_KEYS is given (or in FIPS mode), and otherwise accepted, and
+ * that struct aes_xts_key is zeroized on failure.
+ */
+static void test_aes_xts_weak_keys(struct kunit *test)
+{
+ struct aes_xts_key *key = alloc_buf(test, sizeof(*key));
+ u8 *raw_key_buf_end = alloc_guarded_buf(test, SKCIPHER_MAX_KEY_LEN) +
+ SKCIPHER_MAX_KEY_LEN;
+ int err;
+
+ for (size_t i = 0; i < ARRAY_SIZE(aes_xts_valid_key_lens); i++) {
+ const size_t key_len = aes_xts_valid_key_lens[i];
+ const size_t half = key_len / 2;
+ const bool allowed = aes_xts_is_key_len_allowed(key_len);
+ u8 *raw_key = raw_key_buf_end - key_len;
+
+ /* Generate a weak key in an exact-size guarded buffer. */
+ rand_bytes(raw_key, half);
+ memcpy(&raw_key[half], raw_key, half);
+
+ memset(key, 0xff, sizeof(*key));
+ err = aes_xts_preparekey(key, raw_key, key_len,
+ XTS_FORBID_WEAK_KEYS);
+ KUNIT_ASSERT_EQ_MSG(
+ test, -EINVAL, err,
+ "Weak key wasn't rejected with XTS_FORBID_WEAK_KEYS; key_len=%zu",
+ key_len);
+ KUNIT_ASSERT_TRUE_MSG(
+ test, mem_is_zero(key, sizeof(*key)),
+ "Key struct wasn't zeroized on failure; key_len=%zu",
+ key_len);
+
+ memset(key, 0xff, sizeof(*key));
+ err = aes_xts_preparekey(key, raw_key, key_len, 0);
+ if (fips_enabled)
+ KUNIT_ASSERT_EQ_MSG(
+ test, -EINVAL, err,
+ "Weak key wasn't rejected in FIPS mode; key_len=%zu",
+ key_len);
+ else
+ KUNIT_ASSERT_EQ_MSG(
+ test, 0, err,
+ "Weak key wasn't accepted in non-FIPS mode; key_len=%zu",
+ key_len);
+ if (err)
+ KUNIT_ASSERT_TRUE(test, mem_is_zero(key, sizeof(*key)));
+
+ /*
+ * Make the key non-weak by flipping a bit at each byte position
+ * in turn, to verify that all bytes of the halves are compared.
+ */
+ for (size_t j = 0; j < key_len; j++) {
+ raw_key[j] ^= 1;
+ memset(key, 0xff, sizeof(*key));
+ err = aes_xts_preparekey(key, raw_key, key_len,
+ XTS_FORBID_WEAK_KEYS);
+ KUNIT_ASSERT_EQ_MSG(
+ test, allowed ? 0 : -EINVAL, err,
+ "Wrong result for non-weak key; key_len=%zu diff_byte=%zu",
+ key_len, j);
+ if (err)
+ KUNIT_ASSERT_TRUE(
+ test, mem_is_zero(key, sizeof(*key)));
+ raw_key[j] ^= 1;
+ }
+ }
+}
+
+static struct kunit_case aes_xts_test_cases[] = {
+ KUNIT_CASE(test_aes_xts_test_vectors),
+ KUNIT_CASE(test_aes_xts_weak_keys),
+ SKCIPHER_KUNIT_CASES,
+ {},
+};
+
+static struct kunit_suite aes_xts_test_suite = {
+ .name = "aes_xts",
+ .test_cases = aes_xts_test_cases,
+};
+kunit_test_suite(aes_xts_test_suite);
+
+MODULE_DESCRIPTION("KUnit tests and benchmark for AES-XTS");
+MODULE_LICENSE("GPL");
--
2.56.1
prev parent reply other threads:[~2026-11-16 6:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 6:28 [PATCH 0/7] lib/crypto: KUnit tests for unauthenticated AES modes Eric Biggers
2026-11-16 6:28 ` [PATCH 1/7] lib/crypto: tests: Add skcipher-test-template.h and gen-skcipher-testvecs.py Eric Biggers
2026-11-16 6:28 ` [PATCH 2/7] lib/crypto: tests: Add KUnit test suite for AES-ECB Eric Biggers
2026-11-16 6:28 ` [PATCH 3/7] lib/crypto: tests: Add KUnit test suite for AES-CBC Eric Biggers
2026-11-16 6:28 ` [PATCH 4/7] lib/crypto: tests: Add KUnit test suite for AES-CBC-CTS Eric Biggers
2026-11-16 6:28 ` [PATCH 5/7] lib/crypto: tests: Add KUnit test suite for AES-CTR Eric Biggers
2026-11-16 6:28 ` [PATCH 6/7] lib/crypto: tests: Add KUnit test suite for AES-XCTR Eric Biggers
2026-11-16 6:28 ` Eric Biggers [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116062849.1071038-8-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=Jason@zx2c4.com \
--cc=ardb@kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox