Re: [PATCH v2 3/4] ARM: dts: rockchip: Add Crypto drivers for rk3288

[Caesar Wang <caesar.upstream@gmail.com>]

the subject should be add the node/info for crypto...

在 2015年11月06日 09:17, Zain Wang 写道:
> Add Crypto drivers for rk3288 including crypto controller and dma clk.
>
> Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
> ---
>
> Changed in v2:
> - None
>
> Changed in v1:
> - remove the _crypto suffix
> - use "rockchip,rk3288-crypto" instead of "rockchip,rk3288"
>
>   arch/arm/boot/dts/rk3288.dtsi | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 6a79c9c..7b7914e 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -170,6 +170,21 @@
>   		};
>   	};
>   
> +	crypto: cypto-controller@ff8a0000 {
> +		compatible = "rockchip,rk3288-crypto";
> +		reg = <0xff8a0000 0x4000>;
> +		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru ACLK_CRYPTO>,
> +			 <&cru HCLK_CRYPTO>,
> +			 <&cru SCLK_CRYPTO>,
> +			 <&cru ACLK_DMAC1>;
> +		clock-names = "aclk",
> +			      "hclk",
> +			      "sclk",
> +			      "apb_pclk";

I guess  you can do this:

clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,  <&cru SCLK_CRYPTO>,  <&cru ACLK_DMAC1>;

clock-names = "aclk", "hclk",  "sclk", "apb_pclk";


> +		status = "okay";
> +	};
> +
>   	reserved-memory {
>   		#address-cells = <1>;
>   		#size-cells = <1>;


-- 
Thanks,
Caesar