[PATCH 0/1] omap-sham: use prefetch mechanism to increase transfer speed

[PATCH 0/1] omap-sham: use prefetch mechanism to increase transfer speed

[Dmitry Kasatkin]

Samu Onkalo (1):
  crypto: omap-sham: Adjust DMA parameters

 drivers/crypto/omap-sham.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

[PATCH 1/1] crypto: omap-sham: Adjust DMA parameters

[Dmitry Kasatkin]

From: Samu Onkalo <samu.p.onkalo@nokia.com>

DMA is set to use burst mode also for source channel. It should
descrease memory bandwidth needs.

DMA synchronization is set to use prefetch mechanism. SHAM block is behind
L4 bus and it doesn't have fifo. SHAM block is stalling as long as the new
data is available. It takes time to fetch data from memory and transfer it
via L4 bus. With prefetch enabled, data is waiting in DMA fifo and SHAM block
receives new data block faster.
This increases SHA processing speed up to 30 percent depending on the
bus / memory load.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
---
 drivers/crypto/omap-sham.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 7d14856..a081c7c 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -311,7 +311,8 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr,
 	len32 = DIV_ROUND_UP(length, sizeof(u32));
 
 	omap_set_dma_transfer_params(dd->dma_lch, OMAP_DMA_DATA_TYPE_S32, len32,
-			1, OMAP_DMA_SYNC_PACKET, dd->dma, OMAP_DMA_DST_SYNC);
+			1, OMAP_DMA_SYNC_PACKET, dd->dma,
+				OMAP_DMA_DST_SYNC_PREFETCH);
 
 	omap_set_dma_src_params(dd->dma_lch, 0, OMAP_DMA_AMODE_POST_INC,
 				dma_addr, 0, 0);
@@ -1072,6 +1073,9 @@ static int omap_sham_dma_init(struct omap_sham_dev *dd)
 	omap_set_dma_dest_burst_mode(dd->dma_lch,
 			OMAP_DMA_DATA_BURST_16);
 
+	omap_set_dma_src_burst_mode(dd->dma_lch,
+			OMAP_DMA_DATA_BURST_4);
+
 	return 0;
 }
 
-- 
1.7.0.4

Re: [PATCH 1/1] crypto: omap-sham: Adjust DMA parameters

[Herbert Xu]

On Thu, Sep 02, 2010 at 05:17:35PM +0300, Dmitry Kasatkin wrote:
> From: Samu Onkalo <samu.p.onkalo@nokia.com>
> 
> DMA is set to use burst mode also for source channel. It should
> descrease memory bandwidth needs.
> 
> DMA synchronization is set to use prefetch mechanism. SHAM block is behind
> L4 bus and it doesn't have fifo. SHAM block is stalling as long as the new
> data is available. It takes time to fetch data from memory and transfer it
> via L4 bus. With prefetch enabled, data is waiting in DMA fifo and SHAM block
> receives new data block faster.
> This increases SHA processing speed up to 30 percent depending on the
> bus / memory load.
> 
> Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>

Patch applied.  Thanks!
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt