Linux cryptographic layer development
 help / color / mirror / Atom feed
From: Krzysztof Halasa <khc@pm.waw.pl>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Christian Hohnstaedt <chohnstaedt@innominate.com>,
	linux-crypto@vger.kernel.org
Subject: Re: [6 PATCHes] IXP4xx crypto driver fixes.
Date: Sun, 10 Jan 2010 18:30:53 +0100	[thread overview]
Message-ID: <m3vdf93m0i.fsf@intrepid.localdomain> (raw)
In-Reply-To: <m34omu3rf7.fsf@intrepid.localdomain> (Krzysztof Halasa's message of "Sun, 10 Jan 2010 16:35:38 +0100")

IXP4xx: Fix ixp4xx_crypto little-endian operation.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>

Fixes the following on IXP425 little-endian:

NPE-C: firmware functionality 0x5, revision 0x2:1
alg: skcipher: Test 1 failed on encryption for ecb(des)-ixp4xx
00000000: 01 23 45 67 89 ab cd e7
alg: skcipher: Test 1 failed on encryption for ecb(des3_ede)-ixp4xx
00000000: 73 6f 6d 65 64 61 74 61
alg: skcipher: Test 1 failed on encryption for ecb(aes)-ixp4xx
00000000: 00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff

diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 6c6656d..cac026a 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -96,8 +96,13 @@
 
 struct buffer_desc {
 	u32 phys_next;
+#ifdef __ARMEB__
 	u16 buf_len;
 	u16 pkt_len;
+#else
+	u16 pkt_len;
+	u16 buf_len;
+#endif
 	u32 phys_addr;
 	u32 __reserved[4];
 	struct buffer_desc *next;
@@ -105,17 +110,30 @@ struct buffer_desc {
 };
 
 struct crypt_ctl {
+#ifdef __ARMEB__
 	u8 mode;		/* NPE_OP_*  operation mode */
 	u8 init_len;
 	u16 reserved;
+#else
+	u16 reserved;
+	u8 init_len;
+	u8 mode;		/* NPE_OP_*  operation mode */
+#endif
 	u8 iv[MAX_IVLEN];	/* IV for CBC mode or CTR IV for CTR mode */
 	u32 icv_rev_aes;	/* icv or rev aes */
 	u32 src_buf;
 	u32 dst_buf;
+#ifdef __ARMEB__
 	u16 auth_offs;		/* Authentication start offset */
 	u16 auth_len;		/* Authentication data length */
 	u16 crypt_offs;		/* Cryption start offset */
 	u16 crypt_len;		/* Cryption data length */
+#else
+	u16 auth_len;		/* Authentication data length */
+	u16 auth_offs;		/* Authentication start offset */
+	u16 crypt_len;		/* Cryption data length */
+	u16 crypt_offs;		/* Cryption start offset */
+#endif
 	u32 aadAddr;		/* Additional Auth Data Addr for CCM mode */
 	u32 crypto_ctx;		/* NPE Crypto Param structure address */
 
@@ -651,6 +669,9 @@ static int setup_auth(struct crypto_tfm *tfm, int encrypt, unsigned authsize,
 
 	/* write cfg word to cryptinfo */
 	cfgword = algo->cfgword | ( authsize << 6); /* (authsize/4) << 8 */
+#ifndef __ARMEB__
+	cfgword ^= 0xAA000000; /* change the "byte swap" flags */
+#endif
 	*(u32*)cinfo = cpu_to_be32(cfgword);
 	cinfo += sizeof(cfgword);
 
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2010-01-10 17:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-10 15:34 [6 PATCHes] IXP4xx crypto driver fixes Krzysztof Halasa
2010-01-10 17:30 ` Krzysztof Halasa [this message]
2010-01-11  9:07   ` Christian Hohnstaedt
2010-01-10 17:32 ` IXP4xx: Fix ixp4xx_crypto sparse warnings Krzysztof Halasa
2010-01-10 17:32 ` IXP4xx: Simplify get_crypt_desc() and get_crypt_desc_emerg() in ixp4xx_crypto Krzysztof Halasa
2010-01-10 17:33 ` IXP4xx: Fix whitespace problems " Krzysztof Halasa
2010-01-12 17:12   ` Christian Hohnstaedt
2010-01-12 18:09     ` Krzysztof Halasa
2010-01-10 17:37 ` ixp4xx_crypto: Fix possible NULL ptr dereference Krzysztof Halasa
2010-01-11 10:07   ` Christian Hohnstaedt
2010-01-10 17:37 ` ixp4xx_crypto: simplyfy the code a bit Krzysztof Halasa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m3vdf93m0i.fsf@intrepid.localdomain \
    --to=khc@pm.waw.pl \
    --cc=chohnstaedt@innominate.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-crypto@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox