* Re: [PATCH v4 2/3] drivers: crypto: Add the Virtual Function driver for CPT
From: George Cherian @ 2017-01-12 11:20 UTC (permalink / raw)
To: Stephan Müller
Cc: George Cherian, herbert, davem, david.daney, clabbe.montjoie,
linux-kernel, linux-crypto
In-Reply-To: <1970611.axXSiX4HVh@positron.chronox.de>
Hi Stephan,
Thank you for the clarification.
Regards,
-George
On 01/12/2017 04:49 PM, Stephan Müller wrote:
> Am Donnerstag, 12. Januar 2017, 16:40:32 CET schrieb George Cherian:
>
> Hi George,
>
>>>
>>> Sure, please do not forget to invoke xts_verify_key.
>>
>> Should I be using xts_check_key or xts_verify_key?
>
> Both are identical except for the input parameter -- the one requires
> crypto_skcipher, the other crypto_tfm. Depending what pointer you have handy
> in your setkey function, you would use the most appropriate one.
>
> Ciao
> Stephan
>
^ permalink raw reply
* Re: [PATCH v4 2/3] drivers: crypto: Add the Virtual Function driver for CPT
From: Stephan Müller @ 2017-01-12 11:19 UTC (permalink / raw)
To: George Cherian
Cc: George Cherian, herbert, davem, david.daney, clabbe.montjoie,
linux-kernel, linux-crypto
In-Reply-To: <58776428.1060308@caviumnetworks.com>
Am Donnerstag, 12. Januar 2017, 16:40:32 CET schrieb George Cherian:
Hi George,
> >
> > Sure, please do not forget to invoke xts_verify_key.
>
> Should I be using xts_check_key or xts_verify_key?
Both are identical except for the input parameter -- the one requires
crypto_skcipher, the other crypto_tfm. Depending what pointer you have handy
in your setkey function, you would use the most appropriate one.
Ciao
Stephan
^ permalink raw reply
* Re: [PATCH v4 2/3] drivers: crypto: Add the Virtual Function driver for CPT
From: George Cherian @ 2017-01-12 11:10 UTC (permalink / raw)
To: Stephan Müller
Cc: George Cherian, herbert, davem, david.daney, clabbe.montjoie,
linux-kernel, linux-crypto
In-Reply-To: <1522639.tMShRcNLPc@positron.chronox.de>
Hi Stephan,
On 01/11/2017 06:09 PM, Stephan Müller wrote:
> Am Mittwoch, 11. Januar 2017, 16:58:17 CET schrieb George Cherian:
>
> Hi George,
>
>> I will add a seperate function for xts setkey and make changes as following.
>>> ...
>>>
>>>> +
>>>> +struct crypto_alg algs[] = { {
>>>> + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
>>>> + .cra_blocksize = AES_BLOCK_SIZE,
>>>> + .cra_ctxsize = sizeof(struct cvm_enc_ctx),
>>>> + .cra_alignmask = 7,
>>>> + .cra_priority = 4001,
>>>> + .cra_name = "xts(aes)",
>>>> + .cra_driver_name = "cavium-xts-aes",
>>>> + .cra_type = &crypto_ablkcipher_type,
>>>> + .cra_u = {
>>>> + .ablkcipher = {
>>>> + .ivsize = AES_BLOCK_SIZE,
>>>> + .min_keysize = AES_MIN_KEY_SIZE,
>>>> + .max_keysize = AES_MAX_KEY_SIZE,
>>>> + .setkey = cvm_enc_dec_setkey,
>>>
>>> May I ask how the setkey for XTS is intended to work? The XTS keys are
>>> double in size than "normal" keys.
>>
>> .ablkcipher = {
>> .ivsize = AES_BLOCK_SIZE,
>> .min_keysize = 2 * AES_MIN_KEY_SIZE,
>> .max_keysize = 2 * AES_MAX_KEY_SIZE,
>> .setkey = cvm_xts_setkey,
>>
>> Hope this is fine?
>>
> Sure, please do not forget to invoke xts_verify_key.
Should I be using xts_check_key or xts_verify_key?
>
> Ciao
> Stephan
>
Regards,
-George
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Ingo Molnar @ 2017-01-12 8:18 UTC (permalink / raw)
To: Herbert Xu
Cc: Andy Lutomirski, Linus Torvalds, Linux Kernel Mailing List,
Linux Crypto Mailing List, Thomas Gleixner, Andy Lutomirski,
Ard Biesheuvel
In-Reply-To: <20170112080422.GA14355@gondor.apana.org.au>
* Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > But if we can't do this with automatic verification, then I'm not sure
> > I want to do it at all. The asm is already more precarious than I'd
> > like, and having a code path that is misaligned is asking for obscure
> > bugs down the road.
>
> I understand the need for automated checks at this point in time.
> But longer term this is just part of the calling ABI. After all,
> we don't add checks everywhere to ensure people preserve rbx.
The intelligent and responsible way to introduce such post facto ABI changes is
via a smarter assembler: which would detect the obvious cases where assembly code
generates a misaligned stack, at build time.
Assembly code can obviously still mess up in a hard to detect fashion if it tries
- but that's OK, as most assembly code doesn't try to go outside regular stack
allocation patterns.
Such a static check is relatively straightforward to do in assembly tooling - and
perhaps objtool could do this too, as it already tracks the instructions that
change the stack offset.
( And yes, this is what the GCC guys should have done, instead of sloppily
introducing such silent breakages and making the whole application landscape
less robust ... )
Thanks,
Ingo
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Herbert Xu @ 2017-01-12 8:06 UTC (permalink / raw)
To: Ard Biesheuvel
Cc: Linux Kernel Mailing List, Linux Crypto Mailing List,
Linus Torvalds, Ingo Molnar, Thomas Gleixner, Andy Lutomirski
In-Reply-To: <CAKv+Gu8=zhpZF_Y39L+DtxHysnAEATGP1ZzY1tSMdd+pG=k+jA@mail.gmail.com>
On Thu, Jan 12, 2017 at 08:01:51AM +0000, Ard Biesheuvel wrote:
>
> [From memory] the arm64 ELF psABI mandates a 16 byte stack alignment
> at function entry, and 8 byte alignment at all other times. This means
> compiled code will typically preserve 16 byte alignment, and
> __aligned(16) on a stack variable will likely not result in an
> explicit alignment of the stack pointer *. But the arm64 ISA does not
> have any load/store instructions that would trigger a misalignment
> fault on an address that is 8 byte aligned but not 16 byte aligned, so
> the situation is very different from x86 (assuming I am correct in
> asserting that there are no failure modes resulting from a misaligned
> stack other than this one and a potential performance hit)
OK, sounds like we're already using 16-byte aligned stacks on
ARM64. So unless x86-64 stacks are much smaller, I don't see
the need to use 8-byte aligned stacks at least from a stack space
point-of-view.
Thanks,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Herbert Xu @ 2017-01-12 8:04 UTC (permalink / raw)
To: Andy Lutomirski
Cc: Linus Torvalds, Linux Kernel Mailing List,
Linux Crypto Mailing List, Ingo Molnar, Thomas Gleixner,
Andy Lutomirski, Ard Biesheuvel
In-Reply-To: <CALCETrV78gNs5ZqunaSPZ4AATapb1+ESKd6Wv+5rdMpZe9TSJQ@mail.gmail.com>
On Wed, Jan 11, 2017 at 11:51:10PM -0800, Andy Lutomirski wrote:
>
> The problem is that we have nasties like TRACE_IRQS_OFF. Performance
I don't understand. What's the issue with TRACE_IRQS_OFF? It should
be treated as any other function call. That is, enter it with an
aligned stack, and the TRACE_IRQS_OFF code itself should ensure
the stack stays aligned before it calls down into C.
> But if we can't do this with automatic verification, then I'm not sure
> I want to do it at all. The asm is already more precarious than I'd
> like, and having a code path that is misaligned is asking for obscure
> bugs down the road.
I understand the need for automated checks at this point in time.
But longer term this is just part of the calling ABI. After all,
we don't add checks everywhere to ensure people preserve rbx.
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Ard Biesheuvel @ 2017-01-12 8:01 UTC (permalink / raw)
To: Herbert Xu
Cc: Linux Kernel Mailing List, Linux Crypto Mailing List,
Linus Torvalds, Ingo Molnar, Thomas Gleixner, Andy Lutomirski
In-Reply-To: <20170112061211.GA10247@gondor.apana.org.au>
On 12 January 2017 at 06:12, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Tue, Jan 10, 2017 at 05:30:48PM +0000, Ard Biesheuvel wrote:
>>
>> Apologies for introducing this breakage. It seemed like an obvious and
>> simple cleanup, so I didn't even bother to mention it in the commit
>> log, but if the kernel does not guarantee 16 byte alignment, I guess
>> we should revert to the old method. If SSE instructions are the only
>> ones that require this alignment, then I suppose not having a ABI
>> conforming stack pointer should not be an issue in general.
>
> BTW Ard, what is the stack alignment on ARM64?
>
[From memory] the arm64 ELF psABI mandates a 16 byte stack alignment
at function entry, and 8 byte alignment at all other times. This means
compiled code will typically preserve 16 byte alignment, and
__aligned(16) on a stack variable will likely not result in an
explicit alignment of the stack pointer *. But the arm64 ISA does not
have any load/store instructions that would trigger a misalignment
fault on an address that is 8 byte aligned but not 16 byte aligned, so
the situation is very different from x86 (assuming I am correct in
asserting that there are no failure modes resulting from a misaligned
stack other than this one and a potential performance hit)
* I didn't check whether the exception handling realigns the stack
pointer on nested exceptions (arm64 has separate IRQ stacks)
^ permalink raw reply
* Re: [PATCH v2 8/8] crypto/testmgr: Allocate only the required output size for hash tests
From: Andy Lutomirski @ 2017-01-12 7:52 UTC (permalink / raw)
To: Herbert Xu
Cc: Andy Lutomirski, Daniel Borkmann, Network Development,
linux-kernel@vger.kernel.org, Linux Crypto Mailing List,
Jason A. Donenfeld, Hannes Frederic Sowa, Alexei Starovoitov,
Eric Dumazet, Eric Biggers, Tom Herbert, David S. Miller,
Ard Biesheuvel
In-Reply-To: <20170112074752.GA14230@gondor.apana.org.au>
On Wed, Jan 11, 2017 at 11:47 PM, Herbert Xu
<herbert@gondor.apana.org.au> wrote:
> Andy Lutomirski <luto@kernel.org> wrote:
>> There are some hashes (e.g. sha224) that have some internal trickery
>> to make sure that only the correct number of output bytes are
>> generated. If something goes wrong, they could potentially overrun
>> the output buffer.
>>
>> Make the test more robust by allocating only enough space for the
>> correct output size so that memory debugging will catch the error if
>> the output is overrun.
>>
>> Tested by intentionally breaking sha224 to output all 256
>> internally-generated bits while running on KASAN.
>>
>> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> Cc: Herbert Xu <herbert@gondor.apana.org.au>
>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>
> This patch doesn't seem to depend on anything else in the series.
> Do you want me to take it separately?
Yes, please. Its only relation to the rest of the series is that I
wanted to make sure that I didn't mess up sha224's finalization code.
--Andy
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Andy Lutomirski @ 2017-01-12 7:51 UTC (permalink / raw)
To: Herbert Xu
Cc: Linus Torvalds, Linux Kernel Mailing List,
Linux Crypto Mailing List, Ingo Molnar, Thomas Gleixner,
Andy Lutomirski, Ard Biesheuvel
In-Reply-To: <20170112070534.GA14016@gondor.apana.org.au>
On Wed, Jan 11, 2017 at 11:05 PM, Herbert Xu
<herbert@gondor.apana.org.au> wrote:
> On Tue, Jan 10, 2017 at 09:05:28AM -0800, Linus Torvalds wrote:
>>
>> I'm pretty sure we have random asm code that may not maintain a
>> 16-byte stack alignment when it calls other code (including, in some
>> cases, calling C code).
>>
>> So I'm not at all convinced that this is a good idea. We shouldn't
>> expect 16-byte alignment to be something trustworthy.
>
> So what if we audited all the x86 assembly code to fix this? Would
> it then be acceptable to do a 16-byte aligned stack?
>
> On the face of it it doesn't seem to be a huge amount of code
> assuming they mostly live under arch/x86.
The problem is that we have nasties like TRACE_IRQS_OFF. Performance
doesn't really matter for these macros, so we could probably rig up a
helper for forcibly align the stack there. Maybe
FRAME_BEGIN_FORCE_ALIGN? I also think I'd rather not to modify
pt_regs. We should just fix the small number of code paths that
create a pt_regs and then call into C code to align the stack.
But if we can't do this with automatic verification, then I'm not sure
I want to do it at all. The asm is already more precarious than I'd
like, and having a code path that is misaligned is asking for obscure
bugs down the road.
--Andy
^ permalink raw reply
* Re: arm64 broken
From: Herbert Xu @ 2017-01-12 7:50 UTC (permalink / raw)
To: Rob Rice; +Cc: linux-crypto
In-Reply-To: <0795D328-B031-4EFA-AA0B-603B66F9F035@broadcom.com>
Rob Rice <rob.rice@broadcom.com> wrote:
> I’m working on updating a patchset. The master branch in crypto-2.6 doesn’t compile for ARM64. The first couple errors are listed below. A colleague believes that the following commit in rc2 fixes the problem.
I presume you mean cryptodev and not crypto.
> commit b4b8664d291ac1998e0f0bcdc96b6397f0fe68b3
> Author: Al Viro <viro@zeniv.linux.org.uk <mailto:viro@zeniv.linux.org.uk>>
> Date: Mon Dec 26 04:10:19 2016 -0500
>
> arm64: don't pull uaccess.h into *.S
>
> Split asm-only parts of arm64 uaccess.h into a new header and use that
> from *.S.
>
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk <mailto:viro@zeniv.linux.org.uk>>
>
> Any chance we could either pull in the fix or move to rc2?
Sure I'll pull it in.
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: [PATCH v2 8/8] crypto/testmgr: Allocate only the required output size for hash tests
From: Herbert Xu @ 2017-01-12 7:47 UTC (permalink / raw)
To: Andy Lutomirski
Cc: daniel, netdev, linux-kernel, linux-crypto, Jason, hannes,
alexei.starovoitov, edumazet, ebiggers3, tom, davem, luto,
ard.biesheuvel
In-Reply-To: <890f4bdb28a1cf72f6b802b220b35ebaf0f76bb9.1484090585.git.luto@kernel.org>
Andy Lutomirski <luto@kernel.org> wrote:
> There are some hashes (e.g. sha224) that have some internal trickery
> to make sure that only the correct number of output bytes are
> generated. If something goes wrong, they could potentially overrun
> the output buffer.
>
> Make the test more robust by allocating only enough space for the
> correct output size so that memory debugging will catch the error if
> the output is overrun.
>
> Tested by intentionally breaking sha224 to output all 256
> internally-generated bits while running on KASAN.
>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
This patch doesn't seem to depend on anything else in the series.
Do you want me to take it separately?
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Ingo Molnar @ 2017-01-12 7:46 UTC (permalink / raw)
To: Herbert Xu, Josh Poimboeuf
Cc: Linus Torvalds, Linux Kernel Mailing List,
Linux Crypto Mailing List, Thomas Gleixner, Andy Lutomirski,
Ard Biesheuvel
In-Reply-To: <20170112070534.GA14016@gondor.apana.org.au>
* Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Tue, Jan 10, 2017 at 09:05:28AM -0800, Linus Torvalds wrote:
> >
> > I'm pretty sure we have random asm code that may not maintain a
> > 16-byte stack alignment when it calls other code (including, in some
> > cases, calling C code).
> >
> > So I'm not at all convinced that this is a good idea. We shouldn't
> > expect 16-byte alignment to be something trustworthy.
>
> So what if we audited all the x86 assembly code to fix this? Would
> it then be acceptable to do a 16-byte aligned stack?
Audits for small but deadly details that isn't checked automatically by tooling
would inevitably bitrot again - and in this particular case there's a 50% chance
that a new, buggy change would test out to be 'fine' on a kernel developer's own
box - and break on different configs, different hw or with unrelated (and
innocent) kernel changes, sometime later - spreading the pain unnecessarily.
So my feeling is that we really need improved tooling for this (and yes, the GCC
toolchain should have handled this correctly).
But fortunately we have related tooling in the kernel: could objtool handle this?
My secret hope was always that objtool would grow into a kind of life insurance
against toolchain bogosities (which is a must for things like livepatching or a
DWARF unwinder - but I digress).
Thanks,
Ingo
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Ingo Molnar @ 2017-01-12 7:40 UTC (permalink / raw)
To: Andy Lutomirski
Cc: Herbert Xu, Josh Poimboeuf, Linus Torvalds,
Linux Kernel Mailing List, Linux Crypto Mailing List,
Thomas Gleixner, Andy Lutomirski, Ard Biesheuvel
In-Reply-To: <CALCETrVb-NyKJajGEsLOrQqQrQ7cRm4sqLRxNr_yVE2-mjiDrg@mail.gmail.com>
* Andy Lutomirski <luto@amacapital.net> wrote:
> I find it rather annoying that gcc before 4.8 malfunctions when it
> sees __aligned__(16) on x86_64 kernels. Sigh.
Ran into this when writing silly FPU in-kernel testcases a couple of months ago...
Thanks,
Ingo
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Herbert Xu @ 2017-01-12 7:05 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux Kernel Mailing List, Linux Crypto Mailing List, Ingo Molnar,
Thomas Gleixner, Andy Lutomirski, Ard Biesheuvel
In-Reply-To: <CA+55aFyuUCr3aUBhFt6T3vKyZOskLyH8Kd_2jeFkPYxxvEaXEg@mail.gmail.com>
On Tue, Jan 10, 2017 at 09:05:28AM -0800, Linus Torvalds wrote:
>
> I'm pretty sure we have random asm code that may not maintain a
> 16-byte stack alignment when it calls other code (including, in some
> cases, calling C code).
>
> So I'm not at all convinced that this is a good idea. We shouldn't
> expect 16-byte alignment to be something trustworthy.
So what if we audited all the x86 assembly code to fix this? Would
it then be acceptable to do a 16-byte aligned stack?
On the face of it it doesn't seem to be a huge amount of code
assuming they mostly live under arch/x86.
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Andy Lutomirski @ 2017-01-12 6:21 UTC (permalink / raw)
To: Herbert Xu, Josh Poimboeuf
Cc: Linus Torvalds, Linux Kernel Mailing List,
Linux Crypto Mailing List, Ingo Molnar, Thomas Gleixner,
Andy Lutomirski, Ard Biesheuvel
In-Reply-To: <CALCETrX_vWTWu=kh4Zawn2OuhPnLip8xTqBGjYU-BvpJ9=ruTg@mail.gmail.com>
On Tue, Jan 10, 2017 at 10:01 PM, Andy Lutomirski <luto@amacapital.net> wrote:
> On Tue, Jan 10, 2017 at 8:35 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
>> On Tue, Jan 10, 2017 at 08:17:17PM -0800, Linus Torvalds wrote:
>>>
>>> That said, I do think that the "don't assume stack alignment, do it by
>>> hand" may be the safer thing. Because who knows what the random rules
>>> will be on other architectures.
>>
>> Sure we can ban the use of attribute aligned on stacks. But
>> what about indirect uses through structures? For example, if
>> someone does
>>
>> struct foo {
>> } __attribute__ ((__aligned__(16)));
>>
>> int bar(...)
>> {
>> struct foo f;
>>
>> return baz(&f);
>> }
>>
>> then baz will end up with an unaligned argument. The worst part
>> is that it is not at all obvious to the person writing the function
>> bar.
>
> Linus, I'm starting to lean toward agreeing with Herbert here, except
> that we should consider making it conditional on having a silly GCC
> version. After all, the silly GCC versions are wasting space and time
> with alignment instructions no matter what we do, so this would just
> mean tweaking the asm and adding some kind of check_stack_alignment()
> helper to throw out a WARN_ONCE() if we miss one. The problem with
> making it conditional is that making pt_regs effectively live at a
> variable offset from %rsp is just nasty.
So actually doing this is gross because we have calls from asm to C
all over the place. But... maybe we can automate all the testing.
Josh, how hard would it be to teach objtool to (if requested by an
option) check that stack frames with statically known size preserve
16-byte stack alignment?
I find it rather annoying that gcc before 4.8 malfunctions when it
sees __aligned__(16) on x86_64 kernels. Sigh.
--Andy
^ permalink raw reply
* Re: [PATCH 00/13] crypto: copy AAD during encrypt for AEAD ciphers
From: Herbert Xu @ 2017-01-12 6:19 UTC (permalink / raw)
To: Stephan Müller; +Cc: linux-crypto
In-Reply-To: <10526995.lyZ7Je1KMx@positron.chronox.de>
On Tue, Jan 10, 2017 at 02:36:21AM +0100, Stephan Müller wrote:
>
> to all driver maintainers: the patches I added are compile tested, but
> I do not have the hardware to verify the code. May I ask the respective
> hardware maintainers to verify that the code is appropriate and works
> as intended? Thanks a lot.
>
> Herbert, this is my proprosal for our discussion around copying the
> AAD for algif_aead. Instead of adding the code to algif_aead and wait
> until it transpires to all cipher implementations, I thought it would
> be more helpful to fix all cipher implementations.
I think it's too much churn. Let's get the algif_aead code fixed
up first, and then pursue this later.
BTW, why are you only doing the copy for encryption?
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Herbert Xu @ 2017-01-12 6:12 UTC (permalink / raw)
To: Ard Biesheuvel
Cc: Linux Kernel Mailing List, Linux Crypto Mailing List,
Linus Torvalds, Ingo Molnar, Thomas Gleixner, Andy Lutomirski
In-Reply-To: <CAKv+Gu8xVrfR=J5b2pGK7R5Tv-M3xZhL_dnTvvM7nTZLLtC-EQ@mail.gmail.com>
On Tue, Jan 10, 2017 at 05:30:48PM +0000, Ard Biesheuvel wrote:
>
> Apologies for introducing this breakage. It seemed like an obvious and
> simple cleanup, so I didn't even bother to mention it in the commit
> log, but if the kernel does not guarantee 16 byte alignment, I guess
> we should revert to the old method. If SSE instructions are the only
> ones that require this alignment, then I suppose not having a ABI
> conforming stack pointer should not be an issue in general.
BTW Ard, what is the stack alignment on ARM64?
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* arm64 broken
From: Rob Rice @ 2017-01-11 18:37 UTC (permalink / raw)
To: linux-crypto
I’m working on updating a patchset. The master branch in crypto-2.6 doesn’t compile for ARM64. The first couple errors are listed below. A colleague believes that the following commit in rc2 fixes the problem.
commit b4b8664d291ac1998e0f0bcdc96b6397f0fe68b3
Author: Al Viro <viro@zeniv.linux.org.uk <mailto:viro@zeniv.linux.org.uk>>
Date: Mon Dec 26 04:10:19 2016 -0500
arm64: don't pull uaccess.h into *.S
Split asm-only parts of arm64 uaccess.h into a new header and use that
from *.S.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk <mailto:viro@zeniv.linux.org.uk>>
Any chance we could either pull in the fix or move to rc2?
Thanks,
Rob
AS arch/arm64/kernel/entry.o
In file included from ./include/linux/sched.h:17:0,
from ./include/linux/uaccess.h:4,
from arch/arm64/kernel/entry.S:34:
./include/linux/kernel.h:49:0: warning: "ALIGN" redefined
#define ALIGN(x, a) __ALIGN_KERNEL((x), (a))
^
In file included from arch/arm64/kernel/entry.S:22:0:
./include/linux/linkage.h:78:0: note: this is the location of the previous definition
#define ALIGN __ALIGN
^
In file included from ./include/linux/time.h:7:0,
from ./include/uapi/linux/timex.h:56,
from ./include/linux/timex.h:56,
from ./include/linux/sched.h:19,
from ./include/linux/uaccess.h:4,
from arch/arm64/kernel/entry.S:34:
./include/linux/time64.h:36:0: warning: "NSEC_PER_SEC" redefined
#define NSEC_PER_SEC 1000000000L
^ permalink raw reply
* Re: x86-64: Maintain 16-byte stack alignment
From: Andy Lutomirski @ 2017-01-11 18:20 UTC (permalink / raw)
To: Herbert Xu
Cc: Ard Biesheuvel, Linus Torvalds, Andrew Lutomirski,
Linux Crypto Mailing List, Thomas Gleixner, Ingo Molnar,
Linux Kernel Mailing List
In-Reply-To: <20170111080925.GA5341@gondor.apana.org.au>
On Wed, Jan 11, 2017 at 12:09 AM, Herbert Xu
<herbert@gondor.apana.org.au> wrote:
> On Wed, Jan 11, 2017 at 08:06:54AM +0000, Ard Biesheuvel wrote:
>>
>> Couldn't we update the __aligned(x) macro to emit 32 if arch == x86
>> and x == 16? All other cases should work just fine afaict
>
> Not everyone uses that macro. You'd also need to add some checks
> to stop people from using the gcc __attribute__ directly.
>
You'd also have to audit things to make sure that __aligned__(16)
isn't being used for non-stack purposes. After all, __aligned__(16)
in static data is fine, and it's also fine as a promise to GCC that
some object is 16-byte aligned.
--Andy
^ permalink raw reply
* Re: [PATCH v2 7/8] net: Rename TCA*BPF_DIGEST to ..._SHA256
From: Andy Lutomirski @ 2017-01-11 18:19 UTC (permalink / raw)
To: Daniel Borkmann
Cc: Andy Lutomirski, Netdev, LKML, Linux Crypto Mailing List,
Jason A. Donenfeld, Hannes Frederic Sowa, Alexei Starovoitov,
Eric Dumazet, Eric Biggers, Tom Herbert, David S. Miller,
Alexei Starovoitov
In-Reply-To: <5875F65A.4010904@iogearbox.net>
On Wed, Jan 11, 2017 at 1:09 AM, Daniel Borkmann <daniel@iogearbox.net> wrote:
> Hi Andy,
>
> On 01/11/2017 04:11 AM, Andy Lutomirski wrote:
>>
>> On Tue, Jan 10, 2017 at 4:50 PM, Daniel Borkmann <daniel@iogearbox.net>
>> wrote:
>>>
>>> On 01/11/2017 12:24 AM, Andy Lutomirski wrote:
>>>>
>>>>
>>>> This makes it easier to add another digest algorithm down the road if
>>>> needed. It also serves to force any programs that might have been
>>>> written against a kernel that had the old field name to notice the
>>>> change and make any necessary changes.
>>>>
>>>> This shouldn't violate any stable API policies, as no released kernel
>>>> has ever had TCA*BPF_DIGEST.
>>>
>>>
>>> Imho, this and patch 6/8 is not really needed. Should there ever
>>> another digest alg be used (doubt it), then you'd need a new nl
>>> attribute and fdinfo line anyway to keep existing stuff intact.
>>> Nobody made the claim that you can just change this underneath
>>> and not respecting abi for existing applications when I read from
>>> above that such apps now will get "forced" to notice a change.
>>
>>
>> Fair enough. I was more concerned about prerelease iproute2 versions,
>> but maybe that's a nonissue. I'll drop these two patches.
>
>
> Ok. Sleeping over this a bit, how about a general rename into
> "prog_tag" for fdinfo and TCA_BPF_TAG resp. TCA_ACT_BPF_TAG for
> the netlink attributes, fwiw, it might reduce any assumptions on
> this being made? If this would be preferable, I could cook that
> patch against -net for renaming it?
That would be fine with me.
I think there are two reasonable approaches to computing the actual tag.
1. Use a standard, modern cryptographic hash. SHA-256, SHA-512,
Blake2b, whatever. SHA-1 is a bad choice in part because it's partly
broken and in part because the implementation in lib/ is a real mess
to use (as you noticed while writing the code).
2. Use whatever algorithm you like but make the tag so short that it's
obviously not collision-free. 48 or 64 bits is probably reasonable.
The intermediate versions are just asking for trouble. Alexei wants
to make the tag shorter, but I admit I still don't understand why he
prefers that over using a better crypto hash and letting user code
truncate the tag if it wants.
^ permalink raw reply
* Re: [PATCH v2 8/8] crypto/testmgr: Allocate only the required output size for hash tests
From: Andy Lutomirski @ 2017-01-11 18:10 UTC (permalink / raw)
To: David Laight
Cc: Andy Lutomirski, Daniel Borkmann, Netdev, LKML,
Linux Crypto Mailing List, Jason A. Donenfeld,
Hannes Frederic Sowa, Alexei Starovoitov, Eric Dumazet,
Eric Biggers, Tom Herbert, David S. Miller, Ard Biesheuvel,
Herbert Xu
In-Reply-To: <063D6719AE5E284EB5DD2968C1650D6DB025EE7B@AcuExch.aculab.com>
On Wed, Jan 11, 2017 at 7:13 AM, David Laight <David.Laight@aculab.com> wrote:
> From: Andy Lutomirski
>> Sent: 10 January 2017 23:25
>> There are some hashes (e.g. sha224) that have some internal trickery
>> to make sure that only the correct number of output bytes are
>> generated. If something goes wrong, they could potentially overrun
>> the output buffer.
>>
>> Make the test more robust by allocating only enough space for the
>> correct output size so that memory debugging will catch the error if
>> the output is overrun.
>
> Might be better to test this by allocating an overlong buffer
> and then explicitly checking that the output hasn't overrun
> the allowed space.
>
> If nothing else the error message will be clearer.
I thought about that, but then I'd have to figure out what poison
value to use. Both KASAN and the usual slab debugging are quite good
at this kind of checking, and KASAN will even point you to the
problematic code directly.
--Andy
--
Andy Lutomirski
AMA Capital Management, LLC
^ permalink raw reply
* [PATCH v2 7/7] crypto: arm64/aes - reimplement bit-sliced ARM/NEON implementation for arm64
From: Ard Biesheuvel @ 2017-01-11 16:41 UTC (permalink / raw)
To: linux-crypto; +Cc: herbert, linux-arm-kernel, Ard Biesheuvel
In-Reply-To: <1484152915-26517-1-git-send-email-ard.biesheuvel@linaro.org>
This is a reimplementation of the NEON version of the bit-sliced AES
algorithm. This code is heavily based on Andy Polyakov's OpenSSL version
for ARM, which is also available in the kernel. This is an alternative for
the existing NEON implementation for arm64 authored by me, which suffers
from poor performance due to its reliance on the pathologically slow four
register variant of the tbl/tbx NEON instruction.
This version is about ~30% (*) faster than the generic C code, but only in
cases where the input can be 8x interleaved (this is a fundamental property
of bit slicing). For this reason, only the chaining modes ECB, XTS and CTR
are implemented. (The significance of ECB is that it could potentially be
used by other chaining modes)
* Measured on Cortex-A57. Note that this is still an order of magnitude
slower than the implementations that use the dedicated AES instructions
introduced in ARMv8, but those are part of an optional extension, and so
it is good to have a fallback.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/crypto/Kconfig | 7 +
arch/arm64/crypto/Makefile | 3 +
arch/arm64/crypto/aes-neonbs-core.S | 963 ++++++++++++++++++++
arch/arm64/crypto/aes-neonbs-glue.c | 420 +++++++++
4 files changed, 1393 insertions(+)
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index 0826f8e599a6..5de75c3dcbd4 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -82,4 +82,11 @@ config CRYPTO_CHACHA20_NEON
select CRYPTO_BLKCIPHER
select CRYPTO_CHACHA20
+config CRYPTO_AES_ARM64_BS
+ tristate "AES in ECB/CBC/CTR/XTS modes using bit-sliced NEON algorithm"
+ depends on KERNEL_MODE_NEON
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_AES_ARM64
+ select CRYPTO_SIMD
+
endif
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index a893507629eb..d1ae1b9cbe70 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -47,6 +47,9 @@ chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
obj-$(CONFIG_CRYPTO_AES_ARM64) += aes-arm64.o
aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o
+obj-$(CONFIG_CRYPTO_AES_ARM64_BS) += aes-neon-bs.o
+aes-neon-bs-y := aes-neonbs-core.o aes-neonbs-glue.o
+
AFLAGS_aes-ce.o := -DINTERLEAVE=4
AFLAGS_aes-neon.o := -DINTERLEAVE=4
diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S
new file mode 100644
index 000000000000..8d0cdaa2768d
--- /dev/null
+++ b/arch/arm64/crypto/aes-neonbs-core.S
@@ -0,0 +1,963 @@
+/*
+ * Bit sliced AES using NEON instructions
+ *
+ * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The algorithm implemented here is described in detail by the paper
+ * 'Faster and Timing-Attack Resistant AES-GCM' by Emilia Kaesper and
+ * Peter Schwabe (https://eprint.iacr.org/2009/129.pdf)
+ *
+ * This implementation is based primarily on the OpenSSL implementation
+ * for 32-bit ARM written by Andy Polyakov <appro@openssl.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ .text
+
+ rounds .req x11
+ bskey .req x12
+
+ .macro in_bs_ch, b0, b1, b2, b3, b4, b5, b6, b7
+ eor \b2, \b2, \b1
+ eor \b5, \b5, \b6
+ eor \b3, \b3, \b0
+ eor \b6, \b6, \b2
+ eor \b5, \b5, \b0
+ eor \b6, \b6, \b3
+ eor \b3, \b3, \b7
+ eor \b7, \b7, \b5
+ eor \b3, \b3, \b4
+ eor \b4, \b4, \b5
+ eor \b2, \b2, \b7
+ eor \b3, \b3, \b1
+ eor \b1, \b1, \b5
+ .endm
+
+ .macro out_bs_ch, b0, b1, b2, b3, b4, b5, b6, b7
+ eor \b0, \b0, \b6
+ eor \b1, \b1, \b4
+ eor \b4, \b4, \b6
+ eor \b2, \b2, \b0
+ eor \b6, \b6, \b1
+ eor \b1, \b1, \b5
+ eor \b5, \b5, \b3
+ eor \b3, \b3, \b7
+ eor \b7, \b7, \b5
+ eor \b2, \b2, \b5
+ eor \b4, \b4, \b7
+ .endm
+
+ .macro inv_in_bs_ch, b6, b1, b2, b4, b7, b0, b3, b5
+ eor \b1, \b1, \b7
+ eor \b4, \b4, \b7
+ eor \b7, \b7, \b5
+ eor \b1, \b1, \b3
+ eor \b2, \b2, \b5
+ eor \b3, \b3, \b7
+ eor \b6, \b6, \b1
+ eor \b2, \b2, \b0
+ eor \b5, \b5, \b3
+ eor \b4, \b4, \b6
+ eor \b0, \b0, \b6
+ eor \b1, \b1, \b4
+ .endm
+
+ .macro inv_out_bs_ch, b6, b5, b0, b3, b7, b1, b4, b2
+ eor \b1, \b1, \b5
+ eor \b2, \b2, \b7
+ eor \b3, \b3, \b1
+ eor \b4, \b4, \b5
+ eor \b7, \b7, \b5
+ eor \b3, \b3, \b4
+ eor \b5, \b5, \b0
+ eor \b3, \b3, \b7
+ eor \b6, \b6, \b2
+ eor \b2, \b2, \b1
+ eor \b6, \b6, \b3
+ eor \b3, \b3, \b0
+ eor \b5, \b5, \b6
+ .endm
+
+ .macro mul_gf4, x0, x1, y0, y1, t0, t1
+ eor \t0, \y0, \y1
+ and \t0, \t0, \x0
+ eor \x0, \x0, \x1
+ and \t1, \x1, \y0
+ and \x0, \x0, \y1
+ eor \x1, \t1, \t0
+ eor \x0, \x0, \t1
+ .endm
+
+ .macro mul_gf4_n_gf4, x0, x1, y0, y1, t0, x2, x3, y2, y3, t1
+ eor \t0, \y0, \y1
+ eor \t1, \y2, \y3
+ and \t0, \t0, \x0
+ and \t1, \t1, \x2
+ eor \x0, \x0, \x1
+ eor \x2, \x2, \x3
+ and \x1, \x1, \y0
+ and \x3, \x3, \y2
+ and \x0, \x0, \y1
+ and \x2, \x2, \y3
+ eor \x1, \x1, \x0
+ eor \x2, \x2, \x3
+ eor \x0, \x0, \t0
+ eor \x3, \x3, \t1
+ .endm
+
+ .macro mul_gf16_2, x0, x1, x2, x3, x4, x5, x6, x7, \
+ y0, y1, y2, y3, t0, t1, t2, t3
+ eor \t0, \x0, \x2
+ eor \t1, \x1, \x3
+ mul_gf4 \x0, \x1, \y0, \y1, \t2, \t3
+ eor \y0, \y0, \y2
+ eor \y1, \y1, \y3
+ mul_gf4_n_gf4 \t0, \t1, \y0, \y1, \t3, \x2, \x3, \y2, \y3, \t2
+ eor \x0, \x0, \t0
+ eor \x2, \x2, \t0
+ eor \x1, \x1, \t1
+ eor \x3, \x3, \t1
+ eor \t0, \x4, \x6
+ eor \t1, \x5, \x7
+ mul_gf4_n_gf4 \t0, \t1, \y0, \y1, \t3, \x6, \x7, \y2, \y3, \t2
+ eor \y0, \y0, \y2
+ eor \y1, \y1, \y3
+ mul_gf4 \x4, \x5, \y0, \y1, \t2, \t3
+ eor \x4, \x4, \t0
+ eor \x6, \x6, \t0
+ eor \x5, \x5, \t1
+ eor \x7, \x7, \t1
+ .endm
+
+ .macro inv_gf256, x0, x1, x2, x3, x4, x5, x6, x7, \
+ t0, t1, t2, t3, s0, s1, s2, s3
+ eor \t3, \x4, \x6
+ eor \t0, \x5, \x7
+ eor \t1, \x1, \x3
+ eor \s1, \x7, \x6
+ eor \s0, \x0, \x2
+ eor \s3, \t3, \t0
+ orr \t2, \t0, \t1
+ and \s2, \t3, \s0
+ orr \t3, \t3, \s0
+ eor \s0, \s0, \t1
+ and \t0, \t0, \t1
+ eor \t1, \x3, \x2
+ and \s3, \s3, \s0
+ and \s1, \s1, \t1
+ eor \t1, \x4, \x5
+ eor \s0, \x1, \x0
+ eor \t3, \t3, \s1
+ eor \t2, \t2, \s1
+ and \s1, \t1, \s0
+ orr \t1, \t1, \s0
+ eor \t3, \t3, \s3
+ eor \t0, \t0, \s1
+ eor \t2, \t2, \s2
+ eor \t1, \t1, \s3
+ eor \t0, \t0, \s2
+ and \s0, \x7, \x3
+ eor \t1, \t1, \s2
+ and \s1, \x6, \x2
+ and \s2, \x5, \x1
+ orr \s3, \x4, \x0
+ eor \t3, \t3, \s0
+ eor \t1, \t1, \s2
+ eor \s0, \t0, \s3
+ eor \t2, \t2, \s1
+ and \s2, \t3, \t1
+ eor \s1, \t2, \s2
+ eor \s3, \s0, \s2
+ bsl \s1, \t1, \s0
+ not \t0, \s0
+ bsl \s0, \s1, \s3
+ bsl \t0, \s1, \s3
+ bsl \s3, \t3, \t2
+ eor \t3, \t3, \t2
+ and \s2, \s0, \s3
+ eor \t1, \t1, \t0
+ eor \s2, \s2, \t3
+ mul_gf16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \
+ \s3, \s2, \s1, \t1, \s0, \t0, \t2, \t3
+ .endm
+
+ .macro sbox, b0, b1, b2, b3, b4, b5, b6, b7, \
+ t0, t1, t2, t3, s0, s1, s2, s3
+ in_bs_ch \b0\().16b, \b1\().16b, \b2\().16b, \b3\().16b, \
+ \b4\().16b, \b5\().16b, \b6\().16b, \b7\().16b
+ inv_gf256 \b6\().16b, \b5\().16b, \b0\().16b, \b3\().16b, \
+ \b7\().16b, \b1\().16b, \b4\().16b, \b2\().16b, \
+ \t0\().16b, \t1\().16b, \t2\().16b, \t3\().16b, \
+ \s0\().16b, \s1\().16b, \s2\().16b, \s3\().16b
+ out_bs_ch \b7\().16b, \b1\().16b, \b4\().16b, \b2\().16b, \
+ \b6\().16b, \b5\().16b, \b0\().16b, \b3\().16b
+ .endm
+
+ .macro inv_sbox, b0, b1, b2, b3, b4, b5, b6, b7, \
+ t0, t1, t2, t3, s0, s1, s2, s3
+ inv_in_bs_ch \b0\().16b, \b1\().16b, \b2\().16b, \b3\().16b, \
+ \b4\().16b, \b5\().16b, \b6\().16b, \b7\().16b
+ inv_gf256 \b5\().16b, \b1\().16b, \b2\().16b, \b6\().16b, \
+ \b3\().16b, \b7\().16b, \b0\().16b, \b4\().16b, \
+ \t0\().16b, \t1\().16b, \t2\().16b, \t3\().16b, \
+ \s0\().16b, \s1\().16b, \s2\().16b, \s3\().16b
+ inv_out_bs_ch \b3\().16b, \b7\().16b, \b0\().16b, \b4\().16b, \
+ \b5\().16b, \b1\().16b, \b2\().16b, \b6\().16b
+ .endm
+
+ .macro enc_next_rk
+ ldp q16, q17, [bskey], #128
+ ldp q18, q19, [bskey, #-96]
+ ldp q20, q21, [bskey, #-64]
+ ldp q22, q23, [bskey, #-32]
+ .endm
+
+ .macro dec_next_rk
+ ldp q16, q17, [bskey, #-128]!
+ ldp q18, q19, [bskey, #32]
+ ldp q20, q21, [bskey, #64]
+ ldp q22, q23, [bskey, #96]
+ .endm
+
+ .macro add_round_key, x0, x1, x2, x3, x4, x5, x6, x7
+ eor \x0\().16b, \x0\().16b, v16.16b
+ eor \x1\().16b, \x1\().16b, v17.16b
+ eor \x2\().16b, \x2\().16b, v18.16b
+ eor \x3\().16b, \x3\().16b, v19.16b
+ eor \x4\().16b, \x4\().16b, v20.16b
+ eor \x5\().16b, \x5\().16b, v21.16b
+ eor \x6\().16b, \x6\().16b, v22.16b
+ eor \x7\().16b, \x7\().16b, v23.16b
+ .endm
+
+ .macro shift_rows, x0, x1, x2, x3, x4, x5, x6, x7, mask
+ tbl \x0\().16b, {\x0\().16b}, \mask\().16b
+ tbl \x1\().16b, {\x1\().16b}, \mask\().16b
+ tbl \x2\().16b, {\x2\().16b}, \mask\().16b
+ tbl \x3\().16b, {\x3\().16b}, \mask\().16b
+ tbl \x4\().16b, {\x4\().16b}, \mask\().16b
+ tbl \x5\().16b, {\x5\().16b}, \mask\().16b
+ tbl \x6\().16b, {\x6\().16b}, \mask\().16b
+ tbl \x7\().16b, {\x7\().16b}, \mask\().16b
+ .endm
+
+ .macro mix_cols, x0, x1, x2, x3, x4, x5, x6, x7, \
+ t0, t1, t2, t3, t4, t5, t6, t7, inv
+ ext \t0\().16b, \x0\().16b, \x0\().16b, #12
+ ext \t1\().16b, \x1\().16b, \x1\().16b, #12
+ eor \x0\().16b, \x0\().16b, \t0\().16b
+ ext \t2\().16b, \x2\().16b, \x2\().16b, #12
+ eor \x1\().16b, \x1\().16b, \t1\().16b
+ ext \t3\().16b, \x3\().16b, \x3\().16b, #12
+ eor \x2\().16b, \x2\().16b, \t2\().16b
+ ext \t4\().16b, \x4\().16b, \x4\().16b, #12
+ eor \x3\().16b, \x3\().16b, \t3\().16b
+ ext \t5\().16b, \x5\().16b, \x5\().16b, #12
+ eor \x4\().16b, \x4\().16b, \t4\().16b
+ ext \t6\().16b, \x6\().16b, \x6\().16b, #12
+ eor \x5\().16b, \x5\().16b, \t5\().16b
+ ext \t7\().16b, \x7\().16b, \x7\().16b, #12
+ eor \x6\().16b, \x6\().16b, \t6\().16b
+ eor \t1\().16b, \t1\().16b, \x0\().16b
+ eor \x7\().16b, \x7\().16b, \t7\().16b
+ ext \x0\().16b, \x0\().16b, \x0\().16b, #8
+ eor \t2\().16b, \t2\().16b, \x1\().16b
+ eor \t0\().16b, \t0\().16b, \x7\().16b
+ eor \t1\().16b, \t1\().16b, \x7\().16b
+ ext \x1\().16b, \x1\().16b, \x1\().16b, #8
+ eor \t5\().16b, \t5\().16b, \x4\().16b
+ eor \x0\().16b, \x0\().16b, \t0\().16b
+ eor \t6\().16b, \t6\().16b, \x5\().16b
+ eor \x1\().16b, \x1\().16b, \t1\().16b
+ ext \t0\().16b, \x4\().16b, \x4\().16b, #8
+ eor \t4\().16b, \t4\().16b, \x3\().16b
+ ext \t1\().16b, \x5\().16b, \x5\().16b, #8
+ eor \t7\().16b, \t7\().16b, \x6\().16b
+ ext \x4\().16b, \x3\().16b, \x3\().16b, #8
+ eor \t3\().16b, \t3\().16b, \x2\().16b
+ ext \x5\().16b, \x7\().16b, \x7\().16b, #8
+ eor \t4\().16b, \t4\().16b, \x7\().16b
+ ext \x3\().16b, \x6\().16b, \x6\().16b, #8
+ eor \t3\().16b, \t3\().16b, \x7\().16b
+ ext \x6\().16b, \x2\().16b, \x2\().16b, #8
+ eor \x7\().16b, \t1\().16b, \t5\().16b
+ .ifb \inv
+ eor \x2\().16b, \t0\().16b, \t4\().16b
+ eor \x4\().16b, \x4\().16b, \t3\().16b
+ eor \x5\().16b, \x5\().16b, \t7\().16b
+ eor \x3\().16b, \x3\().16b, \t6\().16b
+ eor \x6\().16b, \x6\().16b, \t2\().16b
+ .else
+ eor \t3\().16b, \t3\().16b, \x4\().16b
+ eor \x5\().16b, \x5\().16b, \t7\().16b
+ eor \x2\().16b, \x3\().16b, \t6\().16b
+ eor \x3\().16b, \t0\().16b, \t4\().16b
+ eor \x4\().16b, \x6\().16b, \t2\().16b
+ mov \x6\().16b, \t3\().16b
+ .endif
+ .endm
+
+ .macro inv_mix_cols, x0, x1, x2, x3, x4, x5, x6, x7, \
+ t0, t1, t2, t3, t4, t5, t6, t7
+ ext \t0\().16b, \x0\().16b, \x0\().16b, #8
+ ext \t6\().16b, \x6\().16b, \x6\().16b, #8
+ ext \t7\().16b, \x7\().16b, \x7\().16b, #8
+ eor \t0\().16b, \t0\().16b, \x0\().16b
+ ext \t1\().16b, \x1\().16b, \x1\().16b, #8
+ eor \t6\().16b, \t6\().16b, \x6\().16b
+ ext \t2\().16b, \x2\().16b, \x2\().16b, #8
+ eor \t7\().16b, \t7\().16b, \x7\().16b
+ ext \t3\().16b, \x3\().16b, \x3\().16b, #8
+ eor \t1\().16b, \t1\().16b, \x1\().16b
+ ext \t4\().16b, \x4\().16b, \x4\().16b, #8
+ eor \t2\().16b, \t2\().16b, \x2\().16b
+ ext \t5\().16b, \x5\().16b, \x5\().16b, #8
+ eor \t3\().16b, \t3\().16b, \x3\().16b
+ eor \t4\().16b, \t4\().16b, \x4\().16b
+ eor \t5\().16b, \t5\().16b, \x5\().16b
+ eor \x0\().16b, \x0\().16b, \t6\().16b
+ eor \x1\().16b, \x1\().16b, \t6\().16b
+ eor \x2\().16b, \x2\().16b, \t0\().16b
+ eor \x4\().16b, \x4\().16b, \t2\().16b
+ eor \x3\().16b, \x3\().16b, \t1\().16b
+ eor \x1\().16b, \x1\().16b, \t7\().16b
+ eor \x2\().16b, \x2\().16b, \t7\().16b
+ eor \x4\().16b, \x4\().16b, \t6\().16b
+ eor \x5\().16b, \x5\().16b, \t3\().16b
+ eor \x3\().16b, \x3\().16b, \t6\().16b
+ eor \x6\().16b, \x6\().16b, \t4\().16b
+ eor \x4\().16b, \x4\().16b, \t7\().16b
+ eor \x5\().16b, \x5\().16b, \t7\().16b
+ eor \x7\().16b, \x7\().16b, \t5\().16b
+ mix_cols \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \
+ \t0, \t1, \t2, \t3, \t4, \t5, \t6, \t7, 1
+ .endm
+
+ .macro swapmove_2x, a0, b0, a1, b1, n, mask, t0, t1
+ ushr \t0\().2d, \b0\().2d, #\n
+ ushr \t1\().2d, \b1\().2d, #\n
+ eor \t0\().16b, \t0\().16b, \a0\().16b
+ eor \t1\().16b, \t1\().16b, \a1\().16b
+ and \t0\().16b, \t0\().16b, \mask\().16b
+ and \t1\().16b, \t1\().16b, \mask\().16b
+ eor \a0\().16b, \a0\().16b, \t0\().16b
+ shl \t0\().2d, \t0\().2d, #\n
+ eor \a1\().16b, \a1\().16b, \t1\().16b
+ shl \t1\().2d, \t1\().2d, #\n
+ eor \b0\().16b, \b0\().16b, \t0\().16b
+ eor \b1\().16b, \b1\().16b, \t1\().16b
+ .endm
+
+ .macro bitslice, x7, x6, x5, x4, x3, x2, x1, x0, t0, t1, t2, t3
+ movi \t0\().16b, #0x55
+ movi \t1\().16b, #0x33
+ swapmove_2x \x0, \x1, \x2, \x3, 1, \t0, \t2, \t3
+ swapmove_2x \x4, \x5, \x6, \x7, 1, \t0, \t2, \t3
+ movi \t0\().16b, #0x0f
+ swapmove_2x \x0, \x2, \x1, \x3, 2, \t1, \t2, \t3
+ swapmove_2x \x4, \x6, \x5, \x7, 2, \t1, \t2, \t3
+ swapmove_2x \x0, \x4, \x1, \x5, 4, \t0, \t2, \t3
+ swapmove_2x \x2, \x6, \x3, \x7, 4, \t0, \t2, \t3
+ .endm
+
+
+ .align 6
+M0: .octa 0x0004080c0105090d02060a0e03070b0f
+
+M0SR: .octa 0x0004080c05090d010a0e02060f03070b
+SR: .octa 0x0f0e0d0c0a09080b0504070600030201
+SRM0: .octa 0x01060b0c0207080d0304090e00050a0f
+
+M0ISR: .octa 0x0004080c0d0105090a0e0206070b0f03
+ISR: .octa 0x0f0e0d0c080b0a090504070602010003
+ISRM0: .octa 0x0306090c00070a0d01040b0e0205080f
+
+ /*
+ * void aesbs_convert_key(u8 out[], u32 const rk[], int rounds)
+ */
+ENTRY(aesbs_convert_key)
+ ld1 {v7.4s}, [x1], #16 // load round 0 key
+ ld1 {v17.4s}, [x1], #16 // load round 1 key
+
+ movi v8.16b, #0x01 // bit masks
+ movi v9.16b, #0x02
+ movi v10.16b, #0x04
+ movi v11.16b, #0x08
+ movi v12.16b, #0x10
+ movi v13.16b, #0x20
+ movi v14.16b, #0x40
+ movi v15.16b, #0x80
+ ldr q16, M0
+
+ sub x2, x2, #1
+ str q7, [x0], #16 // save round 0 key
+
+.Lkey_loop:
+ tbl v7.16b ,{v17.16b}, v16.16b
+ ld1 {v17.4s}, [x1], #16 // load next round key
+
+ cmtst v0.16b, v7.16b, v8.16b
+ cmtst v1.16b, v7.16b, v9.16b
+ cmtst v2.16b, v7.16b, v10.16b
+ cmtst v3.16b, v7.16b, v11.16b
+ cmtst v4.16b, v7.16b, v12.16b
+ cmtst v5.16b, v7.16b, v13.16b
+ cmtst v6.16b, v7.16b, v14.16b
+ cmtst v7.16b, v7.16b, v15.16b
+ not v0.16b, v0.16b
+ not v1.16b, v1.16b
+ not v5.16b, v5.16b
+ not v6.16b, v6.16b
+
+ subs x2, x2, #1
+ stp q0, q1, [x0], #128
+ stp q2, q3, [x0, #-96]
+ stp q4, q5, [x0, #-64]
+ stp q6, q7, [x0, #-32]
+ b.ne .Lkey_loop
+
+ movi v7.16b, #0x63 // compose .L63
+ eor v17.16b, v17.16b, v7.16b
+ str q17, [x0]
+ ret
+ENDPROC(aesbs_convert_key)
+
+ .align 4
+aesbs_encrypt8:
+ ldr q9, [bskey], #16 // round 0 key
+ ldr q8, M0SR
+ ldr q24, SR
+
+ eor v10.16b, v0.16b, v9.16b // xor with round0 key
+ eor v11.16b, v1.16b, v9.16b
+ tbl v0.16b, {v10.16b}, v8.16b
+ eor v12.16b, v2.16b, v9.16b
+ tbl v1.16b, {v11.16b}, v8.16b
+ eor v13.16b, v3.16b, v9.16b
+ tbl v2.16b, {v12.16b}, v8.16b
+ eor v14.16b, v4.16b, v9.16b
+ tbl v3.16b, {v13.16b}, v8.16b
+ eor v15.16b, v5.16b, v9.16b
+ tbl v4.16b, {v14.16b}, v8.16b
+ eor v10.16b, v6.16b, v9.16b
+ tbl v5.16b, {v15.16b}, v8.16b
+ eor v11.16b, v7.16b, v9.16b
+ tbl v6.16b, {v10.16b}, v8.16b
+ tbl v7.16b, {v11.16b}, v8.16b
+
+ bitslice v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11
+
+ sub rounds, rounds, #1
+ b .Lenc_sbox
+
+.Lenc_loop:
+ shift_rows v0, v1, v2, v3, v4, v5, v6, v7, v24
+.Lenc_sbox:
+ sbox v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, v12, \
+ v13, v14, v15
+ subs rounds, rounds, #1
+ b.cc .Lenc_done
+
+ enc_next_rk
+
+ mix_cols v0, v1, v4, v6, v3, v7, v2, v5, v8, v9, v10, v11, v12, \
+ v13, v14, v15
+
+ add_round_key v0, v1, v2, v3, v4, v5, v6, v7
+
+ b.ne .Lenc_loop
+ ldr q24, SRM0
+ b .Lenc_loop
+
+.Lenc_done:
+ ldr q12, [bskey] // last round key
+
+ bitslice v0, v1, v4, v6, v3, v7, v2, v5, v8, v9, v10, v11
+
+ eor v0.16b, v0.16b, v12.16b
+ eor v1.16b, v1.16b, v12.16b
+ eor v4.16b, v4.16b, v12.16b
+ eor v6.16b, v6.16b, v12.16b
+ eor v3.16b, v3.16b, v12.16b
+ eor v7.16b, v7.16b, v12.16b
+ eor v2.16b, v2.16b, v12.16b
+ eor v5.16b, v5.16b, v12.16b
+ ret
+ENDPROC(aesbs_encrypt8)
+
+ .align 4
+aesbs_decrypt8:
+ lsl x9, rounds, #7
+ add bskey, bskey, x9
+
+ ldr q9, [bskey, #-112]! // round 0 key
+ ldr q8, M0ISR
+ ldr q24, ISR
+
+ eor v10.16b, v0.16b, v9.16b // xor with round0 key
+ eor v11.16b, v1.16b, v9.16b
+ tbl v0.16b, {v10.16b}, v8.16b
+ eor v12.16b, v2.16b, v9.16b
+ tbl v1.16b, {v11.16b}, v8.16b
+ eor v13.16b, v3.16b, v9.16b
+ tbl v2.16b, {v12.16b}, v8.16b
+ eor v14.16b, v4.16b, v9.16b
+ tbl v3.16b, {v13.16b}, v8.16b
+ eor v15.16b, v5.16b, v9.16b
+ tbl v4.16b, {v14.16b}, v8.16b
+ eor v10.16b, v6.16b, v9.16b
+ tbl v5.16b, {v15.16b}, v8.16b
+ eor v11.16b, v7.16b, v9.16b
+ tbl v6.16b, {v10.16b}, v8.16b
+ tbl v7.16b, {v11.16b}, v8.16b
+
+ bitslice v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11
+
+ sub rounds, rounds, #1
+ b .Ldec_sbox
+
+.Ldec_loop:
+ shift_rows v0, v1, v2, v3, v4, v5, v6, v7, v24
+.Ldec_sbox:
+ inv_sbox v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, v12, \
+ v13, v14, v15
+ subs rounds, rounds, #1
+ b.cc .Ldec_done
+
+ dec_next_rk
+
+ add_round_key v0, v1, v6, v4, v2, v7, v3, v5
+
+ inv_mix_cols v0, v1, v6, v4, v2, v7, v3, v5, v8, v9, v10, v11, v12, \
+ v13, v14, v15
+
+ b.ne .Ldec_loop
+ ldr q24, ISRM0
+ b .Ldec_loop
+.Ldec_done:
+ ldr q12, [bskey, #-16] // last round key
+
+ bitslice v0, v1, v6, v4, v2, v7, v3, v5, v8, v9, v10, v11
+
+ eor v0.16b, v0.16b, v12.16b
+ eor v1.16b, v1.16b, v12.16b
+ eor v6.16b, v6.16b, v12.16b
+ eor v4.16b, v4.16b, v12.16b
+ eor v2.16b, v2.16b, v12.16b
+ eor v7.16b, v7.16b, v12.16b
+ eor v3.16b, v3.16b, v12.16b
+ eor v5.16b, v5.16b, v12.16b
+ ret
+ENDPROC(aesbs_decrypt8)
+
+ /*
+ * aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+ * int blocks)
+ * aesbs_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+ * int blocks)
+ */
+ .macro __ecb_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7
+ stp x29, x30, [sp, #-16]!
+ mov x29, sp
+
+99: mov x5, #1
+ lsl x5, x5, x4
+ subs w4, w4, #8
+ csel x4, x4, xzr, pl
+ csel x5, x5, xzr, mi
+
+ ld1 {v0.16b}, [x1], #16
+ tbnz x5, #1, 0f
+ ld1 {v1.16b}, [x1], #16
+ tbnz x5, #2, 0f
+ ld1 {v2.16b}, [x1], #16
+ tbnz x5, #3, 0f
+ ld1 {v3.16b}, [x1], #16
+ tbnz x5, #4, 0f
+ ld1 {v4.16b}, [x1], #16
+ tbnz x5, #5, 0f
+ ld1 {v5.16b}, [x1], #16
+ tbnz x5, #6, 0f
+ ld1 {v6.16b}, [x1], #16
+ tbnz x5, #7, 0f
+ ld1 {v7.16b}, [x1], #16
+
+0: mov bskey, x2
+ mov rounds, x3
+ bl \do8
+
+ st1 {\o0\().16b}, [x0], #16
+ tbnz x5, #1, 1f
+ st1 {\o1\().16b}, [x0], #16
+ tbnz x5, #2, 1f
+ st1 {\o2\().16b}, [x0], #16
+ tbnz x5, #3, 1f
+ st1 {\o3\().16b}, [x0], #16
+ tbnz x5, #4, 1f
+ st1 {\o4\().16b}, [x0], #16
+ tbnz x5, #5, 1f
+ st1 {\o5\().16b}, [x0], #16
+ tbnz x5, #6, 1f
+ st1 {\o6\().16b}, [x0], #16
+ tbnz x5, #7, 1f
+ st1 {\o7\().16b}, [x0], #16
+
+ cbnz x4, 99b
+
+1: ldp x29, x30, [sp], #16
+ ret
+ .endm
+
+ .align 4
+ENTRY(aesbs_ecb_encrypt)
+ __ecb_crypt aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
+ENDPROC(aesbs_ecb_encrypt)
+
+ .align 4
+ENTRY(aesbs_ecb_decrypt)
+ __ecb_crypt aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
+ENDPROC(aesbs_ecb_decrypt)
+
+ /*
+ * aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+ * int blocks, u8 iv[])
+ */
+ .align 4
+ENTRY(aesbs_cbc_decrypt)
+ stp x29, x30, [sp, #-16]!
+ mov x29, sp
+
+99: mov x6, #1
+ lsl x6, x6, x4
+ subs w4, w4, #8
+ csel x4, x4, xzr, pl
+ csel x6, x6, xzr, mi
+
+ ld1 {v0.16b}, [x1], #16
+ mov v25.16b, v0.16b
+ tbnz x6, #1, 0f
+ ld1 {v1.16b}, [x1], #16
+ mov v26.16b, v1.16b
+ tbnz x6, #2, 0f
+ ld1 {v2.16b}, [x1], #16
+ mov v27.16b, v2.16b
+ tbnz x6, #3, 0f
+ ld1 {v3.16b}, [x1], #16
+ mov v28.16b, v3.16b
+ tbnz x6, #4, 0f
+ ld1 {v4.16b}, [x1], #16
+ mov v29.16b, v4.16b
+ tbnz x6, #5, 0f
+ ld1 {v5.16b}, [x1], #16
+ mov v30.16b, v5.16b
+ tbnz x6, #6, 0f
+ ld1 {v6.16b}, [x1], #16
+ mov v31.16b, v6.16b
+ tbnz x6, #7, 0f
+ ld1 {v7.16b}, [x1]
+
+0: mov bskey, x2
+ mov rounds, x3
+ bl aesbs_decrypt8
+
+ ld1 {v24.16b}, [x5] // load IV
+
+ eor v1.16b, v1.16b, v25.16b
+ eor v6.16b, v6.16b, v26.16b
+ eor v4.16b, v4.16b, v27.16b
+ eor v2.16b, v2.16b, v28.16b
+ eor v7.16b, v7.16b, v29.16b
+ eor v0.16b, v0.16b, v24.16b
+ eor v3.16b, v3.16b, v30.16b
+ eor v5.16b, v5.16b, v31.16b
+
+ st1 {v0.16b}, [x0], #16
+ mov v24.16b, v25.16b
+ tbnz x6, #1, 1f
+ st1 {v1.16b}, [x0], #16
+ mov v24.16b, v26.16b
+ tbnz x6, #2, 1f
+ st1 {v6.16b}, [x0], #16
+ mov v24.16b, v27.16b
+ tbnz x6, #3, 1f
+ st1 {v4.16b}, [x0], #16
+ mov v24.16b, v28.16b
+ tbnz x6, #4, 1f
+ st1 {v2.16b}, [x0], #16
+ mov v24.16b, v29.16b
+ tbnz x6, #5, 1f
+ st1 {v7.16b}, [x0], #16
+ mov v24.16b, v30.16b
+ tbnz x6, #6, 1f
+ st1 {v3.16b}, [x0], #16
+ mov v24.16b, v31.16b
+ tbnz x6, #7, 1f
+ ld1 {v24.16b}, [x1], #16
+ st1 {v5.16b}, [x0], #16
+1: st1 {v24.16b}, [x5] // store IV
+
+ cbnz x4, 99b
+
+ ldp x29, x30, [sp], #16
+ ret
+ENDPROC(aesbs_cbc_decrypt)
+
+ .macro next_tweak, out, in, const, tmp
+ sshr \tmp\().2d, \in\().2d, #63
+ and \tmp\().16b, \tmp\().16b, \const\().16b
+ add \out\().2d, \in\().2d, \in\().2d
+ ext \tmp\().16b, \tmp\().16b, \tmp\().16b, #8
+ eor \out\().16b, \out\().16b, \tmp\().16b
+ .endm
+
+ .align 4
+.Lxts_mul_x:
+CPU_LE( .quad 1, 0x87 )
+CPU_BE( .quad 0x87, 1 )
+
+ /*
+ * aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+ * int blocks, u8 iv[])
+ * aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+ * int blocks, u8 iv[])
+ */
+__xts_crypt8:
+ mov x6, #1
+ lsl x6, x6, x4
+ subs w4, w4, #8
+ csel x4, x4, xzr, pl
+ csel x6, x6, xzr, mi
+
+ ld1 {v0.16b}, [x1], #16
+ next_tweak v26, v25, v30, v31
+ eor v0.16b, v0.16b, v25.16b
+ tbnz x6, #1, 0f
+
+ ld1 {v1.16b}, [x1], #16
+ next_tweak v27, v26, v30, v31
+ eor v1.16b, v1.16b, v26.16b
+ tbnz x6, #2, 0f
+
+ ld1 {v2.16b}, [x1], #16
+ next_tweak v28, v27, v30, v31
+ eor v2.16b, v2.16b, v27.16b
+ tbnz x6, #3, 0f
+
+ ld1 {v3.16b}, [x1], #16
+ next_tweak v29, v28, v30, v31
+ eor v3.16b, v3.16b, v28.16b
+ tbnz x6, #4, 0f
+
+ ld1 {v4.16b}, [x1], #16
+ str q29, [sp, #16]
+ eor v4.16b, v4.16b, v29.16b
+ next_tweak v29, v29, v30, v31
+ tbnz x6, #5, 0f
+
+ ld1 {v5.16b}, [x1], #16
+ str q29, [sp, #32]
+ eor v5.16b, v5.16b, v29.16b
+ next_tweak v29, v29, v30, v31
+ tbnz x6, #6, 0f
+
+ ld1 {v6.16b}, [x1], #16
+ str q29, [sp, #48]
+ eor v6.16b, v6.16b, v29.16b
+ next_tweak v29, v29, v30, v31
+ tbnz x6, #7, 0f
+
+ ld1 {v7.16b}, [x1], #16
+ str q29, [sp, #64]
+ eor v7.16b, v7.16b, v29.16b
+ next_tweak v29, v29, v30, v31
+
+0: mov bskey, x2
+ mov rounds, x3
+ br x7
+ENDPROC(__xts_crypt8)
+
+ .macro __xts_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7
+ stp x29, x30, [sp, #-80]!
+ mov x29, sp
+
+ ldr q30, .Lxts_mul_x
+ ld1 {v25.16b}, [x5]
+
+99: adr x7, \do8
+ bl __xts_crypt8
+
+ ldp q16, q17, [sp, #16]
+ ldp q18, q19, [sp, #48]
+
+ eor \o0\().16b, \o0\().16b, v25.16b
+ eor \o1\().16b, \o1\().16b, v26.16b
+ eor \o2\().16b, \o2\().16b, v27.16b
+ eor \o3\().16b, \o3\().16b, v28.16b
+
+ st1 {\o0\().16b}, [x0], #16
+ mov v25.16b, v26.16b
+ tbnz x6, #1, 1f
+ st1 {\o1\().16b}, [x0], #16
+ mov v25.16b, v27.16b
+ tbnz x6, #2, 1f
+ st1 {\o2\().16b}, [x0], #16
+ mov v25.16b, v28.16b
+ tbnz x6, #3, 1f
+ st1 {\o3\().16b}, [x0], #16
+ mov v25.16b, v29.16b
+ tbnz x6, #4, 1f
+
+ eor \o4\().16b, \o4\().16b, v16.16b
+ eor \o5\().16b, \o5\().16b, v17.16b
+ eor \o6\().16b, \o6\().16b, v18.16b
+ eor \o7\().16b, \o7\().16b, v19.16b
+
+ st1 {\o4\().16b}, [x0], #16
+ tbnz x6, #5, 1f
+ st1 {\o5\().16b}, [x0], #16
+ tbnz x6, #6, 1f
+ st1 {\o6\().16b}, [x0], #16
+ tbnz x6, #7, 1f
+ st1 {\o7\().16b}, [x0], #16
+
+ cbnz x4, 99b
+
+1: st1 {v25.16b}, [x5]
+ ldp x29, x30, [sp], #80
+ ret
+ .endm
+
+ENTRY(aesbs_xts_encrypt)
+ __xts_crypt aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
+ENDPROC(aesbs_xts_encrypt)
+
+ENTRY(aesbs_xts_decrypt)
+ __xts_crypt aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
+ENDPROC(aesbs_xts_decrypt)
+
+ .macro next_ctr, v
+ mov \v\().d[1], x8
+ adds x8, x8, #1
+ mov \v\().d[0], x7
+ adc x7, x7, xzr
+ rev64 \v\().16b, \v\().16b
+ .endm
+
+ /*
+ * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
+ * int rounds, int blocks, u8 iv[], bool final)
+ */
+ENTRY(aesbs_ctr_encrypt)
+ stp x29, x30, [sp, #-16]!
+ mov x29, sp
+
+ add x4, x4, x6 // do one extra block if final
+
+ ldp x7, x8, [x5]
+ ld1 {v0.16b}, [x5]
+CPU_LE( rev x7, x7 )
+CPU_LE( rev x8, x8 )
+ adds x8, x8, #1
+ adc x7, x7, xzr
+
+99: mov x9, #1
+ lsl x9, x9, x4
+ subs w4, w4, #8
+ csel x4, x4, xzr, pl
+ csel x9, x9, xzr, le
+
+ next_ctr v1
+ next_ctr v2
+ next_ctr v3
+ next_ctr v4
+ next_ctr v5
+ next_ctr v6
+ next_ctr v7
+
+0: mov bskey, x2
+ mov rounds, x3
+ bl aesbs_encrypt8
+
+ lsr x9, x9, x6 // disregard the extra block
+ tbnz x9, #0, 0f
+
+ ld1 {v8.16b}, [x1], #16
+ eor v0.16b, v0.16b, v8.16b
+ st1 {v0.16b}, [x0], #16
+ tbnz x9, #1, 1f
+
+ ld1 {v9.16b}, [x1], #16
+ eor v1.16b, v1.16b, v9.16b
+ st1 {v1.16b}, [x0], #16
+ tbnz x9, #2, 2f
+
+ ld1 {v10.16b}, [x1], #16
+ eor v4.16b, v4.16b, v10.16b
+ st1 {v4.16b}, [x0], #16
+ tbnz x9, #3, 3f
+
+ ld1 {v11.16b}, [x1], #16
+ eor v6.16b, v6.16b, v11.16b
+ st1 {v6.16b}, [x0], #16
+ tbnz x9, #4, 4f
+
+ ld1 {v12.16b}, [x1], #16
+ eor v3.16b, v3.16b, v12.16b
+ st1 {v3.16b}, [x0], #16
+ tbnz x9, #5, 5f
+
+ ld1 {v13.16b}, [x1], #16
+ eor v7.16b, v7.16b, v13.16b
+ st1 {v7.16b}, [x0], #16
+ tbnz x9, #6, 6f
+
+ ld1 {v14.16b}, [x1], #16
+ eor v2.16b, v2.16b, v14.16b
+ st1 {v2.16b}, [x0], #16
+ tbnz x9, #7, 7f
+
+ ld1 {v15.16b}, [x1], #16
+ eor v5.16b, v5.16b, v15.16b
+ st1 {v5.16b}, [x0], #16
+
+ next_ctr v0
+ cbnz x4, 99b
+
+0: st1 {v0.16b}, [x5]
+8: ldp x29, x30, [sp], #16
+ ret
+
+ /*
+ * If we are handling the tail of the input (x6 == 1), return the
+ * final keystream block back to the caller via the IV buffer.
+ */
+1: cbz x6, 8b
+ st1 {v1.16b}, [x5]
+ b 8b
+2: cbz x6, 8b
+ st1 {v4.16b}, [x5]
+ b 8b
+3: cbz x6, 8b
+ st1 {v6.16b}, [x5]
+ b 8b
+4: cbz x6, 8b
+ st1 {v3.16b}, [x5]
+ b 8b
+5: cbz x6, 8b
+ st1 {v7.16b}, [x5]
+ b 8b
+6: cbz x6, 8b
+ st1 {v2.16b}, [x5]
+ b 8b
+7: cbz x6, 8b
+ st1 {v5.16b}, [x5]
+ b 8b
+ENDPROC(aesbs_ctr_encrypt)
diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c
new file mode 100644
index 000000000000..323dd76ae5f0
--- /dev/null
+++ b/arch/arm64/crypto/aes-neonbs-glue.c
@@ -0,0 +1,420 @@
+/*
+ * Bit sliced AES using NEON instructions
+ *
+ * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/neon.h>
+#include <crypto/aes.h>
+#include <crypto/cbc.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/xts.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+
+MODULE_ALIAS_CRYPTO("ecb(aes)");
+MODULE_ALIAS_CRYPTO("cbc(aes)");
+MODULE_ALIAS_CRYPTO("ctr(aes)");
+MODULE_ALIAS_CRYPTO("xts(aes)");
+
+asmlinkage void aesbs_convert_key(u8 out[], u32 const rk[], int rounds);
+
+asmlinkage void aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks);
+asmlinkage void aesbs_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks);
+
+asmlinkage void aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks, u8 iv[]);
+
+asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks, u8 iv[], bool final);
+
+asmlinkage void aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks, u8 iv[]);
+asmlinkage void aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks, u8 iv[]);
+
+asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+
+struct aesbs_ctx {
+ u8 rk[13 * (8 * AES_BLOCK_SIZE) + 32];
+ int rounds;
+} __aligned(AES_BLOCK_SIZE);
+
+struct aesbs_cbc_ctx {
+ struct aesbs_ctx key;
+ u32 enc[AES_MAX_KEYLENGTH_U32];
+};
+
+struct aesbs_xts_ctx {
+ struct aesbs_ctx key;
+ u32 twkey[AES_MAX_KEYLENGTH_U32];
+};
+
+static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct crypto_aes_ctx rk;
+ int err;
+
+ err = crypto_aes_expand_key(&rk, in_key, key_len);
+ if (err)
+ return err;
+
+ ctx->rounds = 6 + key_len / 4;
+
+ kernel_neon_begin();
+ aesbs_convert_key(ctx->rk, rk.key_enc, ctx->rounds);
+ kernel_neon_end();
+
+ return 0;
+}
+
+static int __ecb_crypt(struct skcipher_request *req,
+ void (*fn)(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks))
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct skcipher_walk walk;
+ int err;
+
+ err = skcipher_walk_virt(&walk, req, true);
+
+ kernel_neon_begin();
+ while (walk.nbytes >= AES_BLOCK_SIZE) {
+ unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
+
+ if (walk.nbytes < walk.total)
+ blocks = round_down(blocks,
+ walk.stride / AES_BLOCK_SIZE);
+
+ fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->rk,
+ ctx->rounds, blocks);
+ err = skcipher_walk_done(&walk,
+ walk.nbytes - blocks * AES_BLOCK_SIZE);
+ }
+ kernel_neon_end();
+
+ return err;
+}
+
+static int ecb_encrypt(struct skcipher_request *req)
+{
+ return __ecb_crypt(req, aesbs_ecb_encrypt);
+}
+
+static int ecb_decrypt(struct skcipher_request *req)
+{
+ return __ecb_crypt(req, aesbs_ecb_decrypt);
+}
+
+static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct crypto_aes_ctx rk;
+ int err;
+
+ err = crypto_aes_expand_key(&rk, in_key, key_len);
+ if (err)
+ return err;
+
+ ctx->key.rounds = 6 + key_len / 4;
+
+ memcpy(ctx->enc, rk.key_enc, sizeof(ctx->enc));
+
+ kernel_neon_begin();
+ aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds);
+ kernel_neon_end();
+
+ return 0;
+}
+
+static void cbc_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst)
+{
+ struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+ __aes_arm64_encrypt(ctx->enc, dst, src, ctx->key.rounds);
+}
+
+static int cbc_encrypt(struct skcipher_request *req)
+{
+ return crypto_cbc_encrypt_walk(req, cbc_encrypt_one);
+}
+
+static int cbc_decrypt(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct skcipher_walk walk;
+ int err;
+
+ err = skcipher_walk_virt(&walk, req, true);
+
+ kernel_neon_begin();
+ while (walk.nbytes >= AES_BLOCK_SIZE) {
+ unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
+
+ if (walk.nbytes < walk.total)
+ blocks = round_down(blocks,
+ walk.stride / AES_BLOCK_SIZE);
+
+ aesbs_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+ ctx->key.rk, ctx->key.rounds, blocks,
+ walk.iv);
+ err = skcipher_walk_done(&walk,
+ walk.nbytes - blocks * AES_BLOCK_SIZE);
+ }
+ kernel_neon_end();
+
+ return err;
+}
+
+static int ctr_encrypt(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct skcipher_walk walk;
+ int err;
+
+ err = skcipher_walk_virt(&walk, req, true);
+
+ kernel_neon_begin();
+ while (walk.nbytes > 0) {
+ unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
+ bool final = (walk.total % AES_BLOCK_SIZE) != 0;
+
+ if (walk.nbytes < walk.total) {
+ blocks = round_down(blocks,
+ walk.stride / AES_BLOCK_SIZE);
+ final = false;
+ }
+
+ aesbs_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+ ctx->rk, ctx->rounds, blocks, walk.iv, final);
+
+ if (final) {
+ u8 *dst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
+ u8 *src = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
+
+ if (dst != src)
+ memcpy(dst, src, walk.total % AES_BLOCK_SIZE);
+ crypto_xor(dst, walk.iv, walk.total % AES_BLOCK_SIZE);
+
+ err = skcipher_walk_done(&walk, 0);
+ break;
+ }
+ err = skcipher_walk_done(&walk,
+ walk.nbytes - blocks * AES_BLOCK_SIZE);
+ }
+ kernel_neon_end();
+
+ return err;
+}
+
+static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct crypto_aes_ctx rk;
+ int err;
+
+ err = xts_verify_key(tfm, in_key, key_len);
+ if (err)
+ return err;
+
+ key_len /= 2;
+ err = crypto_aes_expand_key(&rk, in_key + key_len, key_len);
+ if (err)
+ return err;
+
+ memcpy(ctx->twkey, rk.key_enc, sizeof(ctx->twkey));
+
+ return aesbs_setkey(tfm, in_key, key_len);
+}
+
+static int __xts_crypt(struct skcipher_request *req,
+ void (*fn)(u8 out[], u8 const in[], u8 const rk[],
+ int rounds, int blocks, u8 iv[]))
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct skcipher_walk walk;
+ int err;
+
+ err = skcipher_walk_virt(&walk, req, true);
+
+ __aes_arm64_encrypt(ctx->twkey, walk.iv, walk.iv, ctx->key.rounds);
+
+ kernel_neon_begin();
+ while (walk.nbytes >= AES_BLOCK_SIZE) {
+ unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
+
+ if (walk.nbytes < walk.total)
+ blocks = round_down(blocks,
+ walk.stride / AES_BLOCK_SIZE);
+
+ fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->key.rk,
+ ctx->key.rounds, blocks, walk.iv);
+ err = skcipher_walk_done(&walk,
+ walk.nbytes - blocks * AES_BLOCK_SIZE);
+ }
+ kernel_neon_end();
+
+ return err;
+}
+
+static int xts_encrypt(struct skcipher_request *req)
+{
+ return __xts_crypt(req, aesbs_xts_encrypt);
+}
+
+static int xts_decrypt(struct skcipher_request *req)
+{
+ return __xts_crypt(req, aesbs_xts_decrypt);
+}
+
+static struct skcipher_alg aes_algs[] = { {
+ .base.cra_name = "__ecb(aes)",
+ .base.cra_driver_name = "__ecb-aes-neonbs",
+ .base.cra_priority = 250,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct aesbs_ctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_flags = CRYPTO_ALG_INTERNAL,
+
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .walksize = 8 * AES_BLOCK_SIZE,
+ .setkey = aesbs_setkey,
+ .encrypt = ecb_encrypt,
+ .decrypt = ecb_decrypt,
+}, {
+ .base.cra_name = "__cbc(aes)",
+ .base.cra_driver_name = "__cbc-aes-neonbs",
+ .base.cra_priority = 250,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct aesbs_cbc_ctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_flags = CRYPTO_ALG_INTERNAL,
+
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .walksize = 8 * AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aesbs_cbc_setkey,
+ .encrypt = cbc_encrypt,
+ .decrypt = cbc_decrypt,
+}, {
+ .base.cra_name = "__ctr(aes)",
+ .base.cra_driver_name = "__ctr-aes-neonbs",
+ .base.cra_priority = 250,
+ .base.cra_blocksize = 1,
+ .base.cra_ctxsize = sizeof(struct aesbs_ctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_flags = CRYPTO_ALG_INTERNAL,
+
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .chunksize = AES_BLOCK_SIZE,
+ .walksize = 8 * AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aesbs_setkey,
+ .encrypt = ctr_encrypt,
+ .decrypt = ctr_encrypt,
+}, {
+ .base.cra_name = "ctr(aes)",
+ .base.cra_driver_name = "ctr-aes-neonbs",
+ .base.cra_priority = 250 - 1,
+ .base.cra_blocksize = 1,
+ .base.cra_ctxsize = sizeof(struct aesbs_ctx),
+ .base.cra_module = THIS_MODULE,
+
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .chunksize = AES_BLOCK_SIZE,
+ .walksize = 8 * AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aesbs_setkey,
+ .encrypt = ctr_encrypt,
+ .decrypt = ctr_encrypt,
+}, {
+ .base.cra_name = "__xts(aes)",
+ .base.cra_driver_name = "__xts-aes-neonbs",
+ .base.cra_priority = 250,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct aesbs_xts_ctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_flags = CRYPTO_ALG_INTERNAL,
+
+ .min_keysize = 2 * AES_MIN_KEY_SIZE,
+ .max_keysize = 2 * AES_MAX_KEY_SIZE,
+ .walksize = 8 * AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aesbs_xts_setkey,
+ .encrypt = xts_encrypt,
+ .decrypt = xts_decrypt,
+} };
+
+static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)];
+
+static void aes_exit(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aes_simd_algs); i++)
+ if (aes_simd_algs[i])
+ simd_skcipher_free(aes_simd_algs[i]);
+
+ crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
+}
+
+static int __init aes_init(void)
+{
+ struct simd_skcipher_alg *simd;
+ const char *basename;
+ const char *algname;
+ const char *drvname;
+ int err;
+ int i;
+
+ if (!(elf_hwcap & HWCAP_ASIMD))
+ return -ENODEV;
+
+ err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
+ if (err)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
+ if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL))
+ continue;
+
+ algname = aes_algs[i].base.cra_name + 2;
+ drvname = aes_algs[i].base.cra_driver_name + 2;
+ basename = aes_algs[i].base.cra_driver_name;
+ simd = simd_skcipher_create_compat(algname, drvname, basename);
+ err = PTR_ERR(simd);
+ if (IS_ERR(simd))
+ goto unregister_simds;
+
+ aes_simd_algs[i] = simd;
+ }
+ return 0;
+
+unregister_simds:
+ aes_exit();
+ return err;
+}
+
+module_init(aes_init);
+module_exit(aes_exit);
--
2.7.4
^ permalink raw reply related
* [PATCH v2 4/7] crypto: arm64/aes - add scalar implementation
From: Ard Biesheuvel @ 2017-01-11 16:41 UTC (permalink / raw)
To: linux-crypto; +Cc: herbert, linux-arm-kernel, Ard Biesheuvel
In-Reply-To: <1484152915-26517-1-git-send-email-ard.biesheuvel@linaro.org>
This adds a scalar implementation of AES, based on the precomputed tables
that are exposed by the generic AES code. Since rotates are cheap on arm64,
this implementation only uses the 4 core tables (of 1 KB each), and avoids
the prerotated ones, reducing the D-cache footprint by 75%.
On Cortex-A57, this code manages 13.0 cycles per byte, which is ~34% faster
than the generic C code. (Note that this is still >13x slower than the code
that uses the optional ARMv8 Crypto Extensions, which manages <1 cycles per
byte.)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/crypto/Kconfig | 4 +
arch/arm64/crypto/Makefile | 3 +
arch/arm64/crypto/aes-cipher-core.S | 127 ++++++++++++++++++++
arch/arm64/crypto/aes-cipher-glue.c | 69 +++++++++++
4 files changed, 203 insertions(+)
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index 0bf0f531f539..0826f8e599a6 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -41,6 +41,10 @@ config CRYPTO_CRC32_ARM64_CE
depends on KERNEL_MODE_NEON && CRC32
select CRYPTO_HASH
+config CRYPTO_AES_ARM64
+ tristate "AES core cipher using scalar instructions"
+ select CRYPTO_AES
+
config CRYPTO_AES_ARM64_CE
tristate "AES core cipher using ARMv8 Crypto Extensions"
depends on ARM64 && KERNEL_MODE_NEON
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index 9d2826c5fccf..a893507629eb 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -44,6 +44,9 @@ sha512-arm64-y := sha512-glue.o sha512-core.o
obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o
chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
+obj-$(CONFIG_CRYPTO_AES_ARM64) += aes-arm64.o
+aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o
+
AFLAGS_aes-ce.o := -DINTERLEAVE=4
AFLAGS_aes-neon.o := -DINTERLEAVE=4
diff --git a/arch/arm64/crypto/aes-cipher-core.S b/arch/arm64/crypto/aes-cipher-core.S
new file mode 100644
index 000000000000..37590ab8121a
--- /dev/null
+++ b/arch/arm64/crypto/aes-cipher-core.S
@@ -0,0 +1,127 @@
+/*
+ * Scalar AES core transform
+ *
+ * Copyright (C) 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ .text
+
+ rk .req x0
+ out .req x1
+ in .req x2
+ rounds .req x3
+ tt .req x4
+ lt .req x2
+
+ .macro __hround, out0, out1, in0, in1, in2, in3, t0, t1, enc
+ ldp \out0, \out1, [rk], #8
+
+ ubfx w13, \in0, #0, #8
+ ubfx w14, \in1, #8, #8
+ ldr w13, [tt, w13, uxtw #2]
+ ldr w14, [tt, w14, uxtw #2]
+
+ .if \enc
+ ubfx w17, \in1, #0, #8
+ ubfx w18, \in2, #8, #8
+ .else
+ ubfx w17, \in3, #0, #8
+ ubfx w18, \in0, #8, #8
+ .endif
+ ldr w17, [tt, w17, uxtw #2]
+ ldr w18, [tt, w18, uxtw #2]
+
+ ubfx w15, \in2, #16, #8
+ ubfx w16, \in3, #24, #8
+ ldr w15, [tt, w15, uxtw #2]
+ ldr w16, [tt, w16, uxtw #2]
+
+ .if \enc
+ ubfx \t0, \in3, #16, #8
+ ubfx \t1, \in0, #24, #8
+ .else
+ ubfx \t0, \in1, #16, #8
+ ubfx \t1, \in2, #24, #8
+ .endif
+ ldr \t0, [tt, \t0, uxtw #2]
+ ldr \t1, [tt, \t1, uxtw #2]
+
+ eor \out0, \out0, w13
+ eor \out1, \out1, w17
+ eor \out0, \out0, w14, ror #24
+ eor \out1, \out1, w18, ror #24
+ eor \out0, \out0, w15, ror #16
+ eor \out1, \out1, \t0, ror #16
+ eor \out0, \out0, w16, ror #8
+ eor \out1, \out1, \t1, ror #8
+ .endm
+
+ .macro fround, out0, out1, out2, out3, in0, in1, in2, in3
+ __hround \out0, \out1, \in0, \in1, \in2, \in3, \out2, \out3, 1
+ __hround \out2, \out3, \in2, \in3, \in0, \in1, \in1, \in2, 1
+ .endm
+
+ .macro iround, out0, out1, out2, out3, in0, in1, in2, in3
+ __hround \out0, \out1, \in0, \in3, \in2, \in1, \out2, \out3, 0
+ __hround \out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0
+ .endm
+
+ .macro do_crypt, round, ttab, ltab
+ ldp w5, w6, [in]
+ ldp w7, w8, [in, #8]
+ ldp w9, w10, [rk], #16
+ ldp w11, w12, [rk, #-8]
+
+CPU_BE( rev w5, w5 )
+CPU_BE( rev w6, w6 )
+CPU_BE( rev w7, w7 )
+CPU_BE( rev w8, w8 )
+
+ eor w5, w5, w9
+ eor w6, w6, w10
+ eor w7, w7, w11
+ eor w8, w8, w12
+
+ ldr tt, =\ttab
+ ldr lt, =\ltab
+
+ tbnz rounds, #1, 1f
+
+0: \round w9, w10, w11, w12, w5, w6, w7, w8
+ \round w5, w6, w7, w8, w9, w10, w11, w12
+
+1: subs rounds, rounds, #4
+ \round w9, w10, w11, w12, w5, w6, w7, w8
+ csel tt, tt, lt, hi
+ \round w5, w6, w7, w8, w9, w10, w11, w12
+ b.hi 0b
+
+CPU_BE( rev w5, w5 )
+CPU_BE( rev w6, w6 )
+CPU_BE( rev w7, w7 )
+CPU_BE( rev w8, w8 )
+
+ stp w5, w6, [out]
+ stp w7, w8, [out, #8]
+ ret
+
+ .align 4
+ .ltorg
+ .endm
+
+ .align 5
+ENTRY(__aes_arm64_encrypt)
+ do_crypt fround, crypto_ft_tab, crypto_fl_tab
+ENDPROC(__aes_arm64_encrypt)
+
+ .align 5
+ENTRY(__aes_arm64_decrypt)
+ do_crypt iround, crypto_it_tab, crypto_il_tab
+ENDPROC(__aes_arm64_decrypt)
diff --git a/arch/arm64/crypto/aes-cipher-glue.c b/arch/arm64/crypto/aes-cipher-glue.c
new file mode 100644
index 000000000000..7288e7cbebff
--- /dev/null
+++ b/arch/arm64/crypto/aes-cipher-glue.c
@@ -0,0 +1,69 @@
+/*
+ * Scalar AES core transform
+ *
+ * Copyright (C) 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <crypto/aes.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+EXPORT_SYMBOL(__aes_arm64_encrypt);
+
+asmlinkage void __aes_arm64_decrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+EXPORT_SYMBOL(__aes_arm64_decrypt);
+
+static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ int rounds = 6 + ctx->key_length / 4;
+
+ __aes_arm64_encrypt(ctx->key_enc, out, in, rounds);
+}
+
+static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ int rounds = 6 + ctx->key_length / 4;
+
+ __aes_arm64_decrypt(ctx->key_dec, out, in, rounds);
+}
+
+static struct crypto_alg aes_alg = {
+ .cra_name = "aes",
+ .cra_driver_name = "aes-arm64",
+ .cra_priority = 200,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct crypto_aes_ctx),
+ .cra_module = THIS_MODULE,
+
+ .cra_cipher.cia_min_keysize = AES_MIN_KEY_SIZE,
+ .cra_cipher.cia_max_keysize = AES_MAX_KEY_SIZE,
+ .cra_cipher.cia_setkey = crypto_aes_set_key,
+ .cra_cipher.cia_encrypt = aes_encrypt,
+ .cra_cipher.cia_decrypt = aes_decrypt
+};
+
+static int __init aes_init(void)
+{
+ return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_fini(void)
+{
+ crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_DESCRIPTION("Scalar AES cipher for arm64");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("aes");
--
2.7.4
^ permalink raw reply related
* [PATCH v2 5/7] crypto: arm/aes - replace scalar AES cipher
From: Ard Biesheuvel @ 2017-01-11 16:41 UTC (permalink / raw)
To: linux-crypto; +Cc: herbert, linux-arm-kernel, Ard Biesheuvel
In-Reply-To: <1484152915-26517-1-git-send-email-ard.biesheuvel@linaro.org>
This replaces the scalar AES cipher that originates in the OpenSSL project
with a new implementation that is ~15% (*) faster (on modern cores), and
reuses the lookup tables and the key schedule generation routines from the
generic C implementation (which is usually compiled in anyway due to
networking and other subsystems depending on it).
Note that the bit sliced NEON code for AES still depends on the scalar cipher
that this patch replaces, so it is not removed entirely yet.
* On Cortex-A57, the performance increases from 17.0 to 14.9 cycles per byte
for 128-bit keys.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm/crypto/Kconfig | 20 +--
arch/arm/crypto/Makefile | 4 +-
arch/arm/crypto/aes-cipher-core.S | 179 ++++++++++++++++++++
arch/arm/crypto/aes-cipher-glue.c | 74 ++++++++
arch/arm/crypto/aes_glue.c | 98 -----------
5 files changed, 256 insertions(+), 119 deletions(-)
diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig
index 2f3339f015d3..f1de658c3c8f 100644
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -62,33 +62,15 @@ config CRYPTO_SHA512_ARM
using optimized ARM assembler and NEON, when available.
config CRYPTO_AES_ARM
- tristate "AES cipher algorithms (ARM-asm)"
- depends on ARM
+ tristate "Scalar AES cipher for ARM"
select CRYPTO_ALGAPI
select CRYPTO_AES
help
Use optimized AES assembler routines for ARM platforms.
- AES cipher algorithms (FIPS-197). AES uses the Rijndael
- algorithm.
-
- Rijndael appears to be consistently a very good performer in
- both hardware and software across a wide range of computing
- environments regardless of its use in feedback or non-feedback
- modes. Its key setup time is excellent, and its key agility is
- good. Rijndael's very low memory requirements make it very well
- suited for restricted-space environments, in which it also
- demonstrates excellent performance. Rijndael's operations are
- among the easiest to defend against power and timing attacks.
-
- The AES specifies three key sizes: 128, 192 and 256 bits
-
- See <http://csrc.nist.gov/encryption/aes/> for more information.
-
config CRYPTO_AES_ARM_BS
tristate "Bit sliced AES using NEON instructions"
depends on KERNEL_MODE_NEON
- select CRYPTO_AES_ARM
select CRYPTO_BLKCIPHER
select CRYPTO_SIMD
help
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index 8d74e55eacd4..8f5de2db701c 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -27,8 +27,8 @@ $(warning $(ce-obj-y) $(ce-obj-m))
endif
endif
-aes-arm-y := aes-armv4.o aes_glue.o
-aes-arm-bs-y := aesbs-core.o aesbs-glue.o
+aes-arm-y := aes-cipher-core.o aes-cipher-glue.o
+aes-arm-bs-y := aes-armv4.o aesbs-core.o aesbs-glue.o
sha1-arm-y := sha1-armv4-large.o sha1_glue.o
sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o
sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
diff --git a/arch/arm/crypto/aes-cipher-core.S b/arch/arm/crypto/aes-cipher-core.S
new file mode 100644
index 000000000000..b04261e1e068
--- /dev/null
+++ b/arch/arm/crypto/aes-cipher-core.S
@@ -0,0 +1,179 @@
+/*
+ * Scalar AES core transform
+ *
+ * Copyright (C) 2017 Linaro Ltd.
+ * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+ .text
+ .align 5
+
+ rk .req r0
+ rounds .req r1
+ in .req r2
+ out .req r3
+ tt .req ip
+
+ t0 .req lr
+ t1 .req r2
+ t2 .req r3
+
+ .macro __select, out, in, idx
+ .if __LINUX_ARM_ARCH__ < 7
+ and \out, \in, #0xff << (8 * \idx)
+ .else
+ ubfx \out, \in, #(8 * \idx), #8
+ .endif
+ .endm
+
+ .macro __load, out, in, idx
+ .if __LINUX_ARM_ARCH__ < 7 && \idx > 0
+ ldr \out, [tt, \in, lsr #(8 * \idx) - 2]
+ .else
+ ldr \out, [tt, \in, lsl #2]
+ .endif
+ .endm
+
+ .macro __hround, out0, out1, in0, in1, in2, in3, t3, t4, enc
+ __select \out0, \in0, 0
+ __select t0, \in1, 1
+ __load \out0, \out0, 0
+ __load t0, t0, 1
+
+ .if \enc
+ __select \out1, \in1, 0
+ __select t1, \in2, 1
+ .else
+ __select \out1, \in3, 0
+ __select t1, \in0, 1
+ .endif
+ __load \out1, \out1, 0
+ __select t2, \in2, 2
+ __load t1, t1, 1
+ __load t2, t2, 2
+
+ eor \out0, \out0, t0, ror #24
+
+ __select t0, \in3, 3
+ .if \enc
+ __select \t3, \in3, 2
+ __select \t4, \in0, 3
+ .else
+ __select \t3, \in1, 2
+ __select \t4, \in2, 3
+ .endif
+ __load \t3, \t3, 2
+ __load t0, t0, 3
+ __load \t4, \t4, 3
+
+ eor \out1, \out1, t1, ror #24
+ eor \out0, \out0, t2, ror #16
+ ldm rk!, {t1, t2}
+ eor \out1, \out1, \t3, ror #16
+ eor \out0, \out0, t0, ror #8
+ eor \out1, \out1, \t4, ror #8
+ eor \out0, \out0, t1
+ eor \out1, \out1, t2
+ .endm
+
+ .macro fround, out0, out1, out2, out3, in0, in1, in2, in3
+ __hround \out0, \out1, \in0, \in1, \in2, \in3, \out2, \out3, 1
+ __hround \out2, \out3, \in2, \in3, \in0, \in1, \in1, \in2, 1
+ .endm
+
+ .macro iround, out0, out1, out2, out3, in0, in1, in2, in3
+ __hround \out0, \out1, \in0, \in3, \in2, \in1, \out2, \out3, 0
+ __hround \out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0
+ .endm
+
+ .macro __rev, out, in
+ .if __LINUX_ARM_ARCH__ < 6
+ lsl t0, \in, #24
+ and t1, \in, #0xff00
+ and t2, \in, #0xff0000
+ orr \out, t0, \in, lsr #24
+ orr \out, \out, t1, lsl #8
+ orr \out, \out, t2, lsr #8
+ .else
+ rev \out, \in
+ .endif
+ .endm
+
+ .macro __adrl, out, sym, c
+ .if __LINUX_ARM_ARCH__ < 7
+ ldr\c \out, =\sym
+ .else
+ movw\c \out, #:lower16:\sym
+ movt\c \out, #:upper16:\sym
+ .endif
+ .endm
+
+ .macro do_crypt, round, ttab, ltab
+ push {r3-r11, lr}
+
+ ldr r4, [in]
+ ldr r5, [in, #4]
+ ldr r6, [in, #8]
+ ldr r7, [in, #12]
+
+ ldm rk!, {r8-r11}
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ __rev r4, r4
+ __rev r5, r5
+ __rev r6, r6
+ __rev r7, r7
+#endif
+
+ eor r4, r4, r8
+ eor r5, r5, r9
+ eor r6, r6, r10
+ eor r7, r7, r11
+
+ __adrl tt, \ttab
+
+ tst rounds, #2
+ bne 1f
+
+0: \round r8, r9, r10, r11, r4, r5, r6, r7
+ \round r4, r5, r6, r7, r8, r9, r10, r11
+
+1: subs rounds, rounds, #4
+ \round r8, r9, r10, r11, r4, r5, r6, r7
+ __adrl tt, \ltab, ls
+ \round r4, r5, r6, r7, r8, r9, r10, r11
+ bhi 0b
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ __rev r4, r4
+ __rev r5, r5
+ __rev r6, r6
+ __rev r7, r7
+#endif
+
+ ldr out, [sp]
+
+ str r4, [out]
+ str r5, [out, #4]
+ str r6, [out, #8]
+ str r7, [out, #12]
+
+ pop {r3-r11, pc}
+
+ .align 3
+ .ltorg
+ .endm
+
+ENTRY(__aes_arm_encrypt)
+ do_crypt fround, crypto_ft_tab, crypto_fl_tab
+ENDPROC(__aes_arm_encrypt)
+
+ENTRY(__aes_arm_decrypt)
+ do_crypt iround, crypto_it_tab, crypto_il_tab
+ENDPROC(__aes_arm_decrypt)
diff --git a/arch/arm/crypto/aes-cipher-glue.c b/arch/arm/crypto/aes-cipher-glue.c
new file mode 100644
index 000000000000..c222f6e072ad
--- /dev/null
+++ b/arch/arm/crypto/aes-cipher-glue.c
@@ -0,0 +1,74 @@
+/*
+ * Scalar AES core transform
+ *
+ * Copyright (C) 2017 Linaro Ltd.
+ * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <crypto/aes.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+asmlinkage void __aes_arm_encrypt(u32 *rk, int rounds, const u8 *in, u8 *out);
+EXPORT_SYMBOL(__aes_arm_encrypt);
+
+asmlinkage void __aes_arm_decrypt(u32 *rk, int rounds, const u8 *in, u8 *out);
+EXPORT_SYMBOL(__aes_arm_decrypt);
+
+static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ int rounds = 6 + ctx->key_length / 4;
+
+ __aes_arm_encrypt(ctx->key_enc, rounds, in, out);
+}
+
+static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ int rounds = 6 + ctx->key_length / 4;
+
+ __aes_arm_decrypt(ctx->key_dec, rounds, in, out);
+}
+
+static struct crypto_alg aes_alg = {
+ .cra_name = "aes",
+ .cra_driver_name = "aes-arm",
+ .cra_priority = 200,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct crypto_aes_ctx),
+ .cra_module = THIS_MODULE,
+
+ .cra_cipher.cia_min_keysize = AES_MIN_KEY_SIZE,
+ .cra_cipher.cia_max_keysize = AES_MAX_KEY_SIZE,
+ .cra_cipher.cia_setkey = crypto_aes_set_key,
+ .cra_cipher.cia_encrypt = aes_encrypt,
+ .cra_cipher.cia_decrypt = aes_decrypt,
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ .cra_alignmask = 3,
+#endif
+};
+
+static int __init aes_init(void)
+{
+ return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_fini(void)
+{
+ crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_DESCRIPTION("Scalar AES cipher for ARM");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("aes");
diff --git a/arch/arm/crypto/aes_glue.c b/arch/arm/crypto/aes_glue.c
deleted file mode 100644
index 0409b8f89782..000000000000
--- a/arch/arm/crypto/aes_glue.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Glue Code for the asm optimized version of the AES Cipher Algorithm
- */
-
-#include <linux/module.h>
-#include <linux/crypto.h>
-#include <crypto/aes.h>
-
-#include "aes_glue.h"
-
-EXPORT_SYMBOL(AES_encrypt);
-EXPORT_SYMBOL(AES_decrypt);
-EXPORT_SYMBOL(private_AES_set_encrypt_key);
-EXPORT_SYMBOL(private_AES_set_decrypt_key);
-
-static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-{
- struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
- AES_encrypt(src, dst, &ctx->enc_key);
-}
-
-static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-{
- struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
- AES_decrypt(src, dst, &ctx->dec_key);
-}
-
-static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
- unsigned int key_len)
-{
- struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
-
- switch (key_len) {
- case AES_KEYSIZE_128:
- key_len = 128;
- break;
- case AES_KEYSIZE_192:
- key_len = 192;
- break;
- case AES_KEYSIZE_256:
- key_len = 256;
- break;
- default:
- tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
- return -EINVAL;
- }
-
- if (private_AES_set_encrypt_key(in_key, key_len, &ctx->enc_key) == -1) {
- tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
- return -EINVAL;
- }
- /* private_AES_set_decrypt_key expects an encryption key as input */
- ctx->dec_key = ctx->enc_key;
- if (private_AES_set_decrypt_key(in_key, key_len, &ctx->dec_key) == -1) {
- tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
- return -EINVAL;
- }
- return 0;
-}
-
-static struct crypto_alg aes_alg = {
- .cra_name = "aes",
- .cra_driver_name = "aes-asm",
- .cra_priority = 200,
- .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
- .cra_blocksize = AES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct AES_CTX),
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(aes_alg.cra_list),
- .cra_u = {
- .cipher = {
- .cia_min_keysize = AES_MIN_KEY_SIZE,
- .cia_max_keysize = AES_MAX_KEY_SIZE,
- .cia_setkey = aes_set_key,
- .cia_encrypt = aes_encrypt,
- .cia_decrypt = aes_decrypt
- }
- }
-};
-
-static int __init aes_init(void)
-{
- return crypto_register_alg(&aes_alg);
-}
-
-static void __exit aes_fini(void)
-{
- crypto_unregister_alg(&aes_alg);
-}
-
-module_init(aes_init);
-module_exit(aes_fini);
-
-MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CRYPTO("aes");
-MODULE_ALIAS_CRYPTO("aes-asm");
-MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
--
2.7.4
^ permalink raw reply related
* [PATCH v2 1/7] crypto: arm64/chacha20 - implement NEON version based on SSE3 code
From: Ard Biesheuvel @ 2017-01-11 16:41 UTC (permalink / raw)
To: linux-crypto; +Cc: herbert, linux-arm-kernel, Ard Biesheuvel
In-Reply-To: <1484152915-26517-1-git-send-email-ard.biesheuvel@linaro.org>
This is a straight port to arm64/NEON of the x86 SSE3 implementation
of the ChaCha20 stream cipher. It uses the new skcipher walksize
attribute to process the input in strides of 4x the block size.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/crypto/Kconfig | 6 +
arch/arm64/crypto/Makefile | 3 +
arch/arm64/crypto/chacha20-neon-core.S | 450 ++++++++++++++++++++
arch/arm64/crypto/chacha20-neon-glue.c | 127 ++++++
4 files changed, 586 insertions(+)
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index 450a85df041a..0bf0f531f539 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -72,4 +72,10 @@ config CRYPTO_CRC32_ARM64
depends on ARM64
select CRYPTO_HASH
+config CRYPTO_CHACHA20_NEON
+ tristate "NEON accelerated ChaCha20 symmetric cipher"
+ depends on KERNEL_MODE_NEON
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_CHACHA20
+
endif
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index aa8888d7b744..9d2826c5fccf 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -41,6 +41,9 @@ sha256-arm64-y := sha256-glue.o sha256-core.o
obj-$(CONFIG_CRYPTO_SHA512_ARM64) += sha512-arm64.o
sha512-arm64-y := sha512-glue.o sha512-core.o
+obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o
+chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
+
AFLAGS_aes-ce.o := -DINTERLEAVE=4
AFLAGS_aes-neon.o := -DINTERLEAVE=4
diff --git a/arch/arm64/crypto/chacha20-neon-core.S b/arch/arm64/crypto/chacha20-neon-core.S
new file mode 100644
index 000000000000..13c85e272c2a
--- /dev/null
+++ b/arch/arm64/crypto/chacha20-neon-core.S
@@ -0,0 +1,450 @@
+/*
+ * ChaCha20 256-bit cipher algorithm, RFC7539, arm64 NEON functions
+ *
+ * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on:
+ * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSSE3 functions
+ *
+ * Copyright (C) 2015 Martin Willi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+
+ .text
+ .align 6
+
+ENTRY(chacha20_block_xor_neon)
+ // x0: Input state matrix, s
+ // x1: 1 data block output, o
+ // x2: 1 data block input, i
+
+ //
+ // This function encrypts one ChaCha20 block by loading the state matrix
+ // in four NEON registers. It performs matrix operation on four words in
+ // parallel, but requires shuffling to rearrange the words after each
+ // round.
+ //
+
+ // x0..3 = s0..3
+ adr x3, ROT8
+ ld1 {v0.4s-v3.4s}, [x0]
+ ld1 {v8.4s-v11.4s}, [x0]
+ ld1 {v12.4s}, [x3]
+
+ mov x3, #10
+
+.Ldoubleround:
+ // x0 += x1, x3 = rotl32(x3 ^ x0, 16)
+ add v0.4s, v0.4s, v1.4s
+ eor v3.16b, v3.16b, v0.16b
+ rev32 v3.8h, v3.8h
+
+ // x2 += x3, x1 = rotl32(x1 ^ x2, 12)
+ add v2.4s, v2.4s, v3.4s
+ eor v4.16b, v1.16b, v2.16b
+ shl v1.4s, v4.4s, #12
+ sri v1.4s, v4.4s, #20
+
+ // x0 += x1, x3 = rotl32(x3 ^ x0, 8)
+ add v0.4s, v0.4s, v1.4s
+ eor v3.16b, v3.16b, v0.16b
+ tbl v3.16b, {v3.16b}, v12.16b
+
+ // x2 += x3, x1 = rotl32(x1 ^ x2, 7)
+ add v2.4s, v2.4s, v3.4s
+ eor v4.16b, v1.16b, v2.16b
+ shl v1.4s, v4.4s, #7
+ sri v1.4s, v4.4s, #25
+
+ // x1 = shuffle32(x1, MASK(0, 3, 2, 1))
+ ext v1.16b, v1.16b, v1.16b, #4
+ // x2 = shuffle32(x2, MASK(1, 0, 3, 2))
+ ext v2.16b, v2.16b, v2.16b, #8
+ // x3 = shuffle32(x3, MASK(2, 1, 0, 3))
+ ext v3.16b, v3.16b, v3.16b, #12
+
+ // x0 += x1, x3 = rotl32(x3 ^ x0, 16)
+ add v0.4s, v0.4s, v1.4s
+ eor v3.16b, v3.16b, v0.16b
+ rev32 v3.8h, v3.8h
+
+ // x2 += x3, x1 = rotl32(x1 ^ x2, 12)
+ add v2.4s, v2.4s, v3.4s
+ eor v4.16b, v1.16b, v2.16b
+ shl v1.4s, v4.4s, #12
+ sri v1.4s, v4.4s, #20
+
+ // x0 += x1, x3 = rotl32(x3 ^ x0, 8)
+ add v0.4s, v0.4s, v1.4s
+ eor v3.16b, v3.16b, v0.16b
+ tbl v3.16b, {v3.16b}, v12.16b
+
+ // x2 += x3, x1 = rotl32(x1 ^ x2, 7)
+ add v2.4s, v2.4s, v3.4s
+ eor v4.16b, v1.16b, v2.16b
+ shl v1.4s, v4.4s, #7
+ sri v1.4s, v4.4s, #25
+
+ // x1 = shuffle32(x1, MASK(2, 1, 0, 3))
+ ext v1.16b, v1.16b, v1.16b, #12
+ // x2 = shuffle32(x2, MASK(1, 0, 3, 2))
+ ext v2.16b, v2.16b, v2.16b, #8
+ // x3 = shuffle32(x3, MASK(0, 3, 2, 1))
+ ext v3.16b, v3.16b, v3.16b, #4
+
+ subs x3, x3, #1
+ b.ne .Ldoubleround
+
+ ld1 {v4.16b-v7.16b}, [x2]
+
+ // o0 = i0 ^ (x0 + s0)
+ add v0.4s, v0.4s, v8.4s
+ eor v0.16b, v0.16b, v4.16b
+
+ // o1 = i1 ^ (x1 + s1)
+ add v1.4s, v1.4s, v9.4s
+ eor v1.16b, v1.16b, v5.16b
+
+ // o2 = i2 ^ (x2 + s2)
+ add v2.4s, v2.4s, v10.4s
+ eor v2.16b, v2.16b, v6.16b
+
+ // o3 = i3 ^ (x3 + s3)
+ add v3.4s, v3.4s, v11.4s
+ eor v3.16b, v3.16b, v7.16b
+
+ st1 {v0.16b-v3.16b}, [x1]
+
+ ret
+ENDPROC(chacha20_block_xor_neon)
+
+ .align 6
+ENTRY(chacha20_4block_xor_neon)
+ // x0: Input state matrix, s
+ // x1: 4 data blocks output, o
+ // x2: 4 data blocks input, i
+
+ //
+ // This function encrypts four consecutive ChaCha20 blocks by loading
+ // the state matrix in NEON registers four times. The algorithm performs
+ // each operation on the corresponding word of each state matrix, hence
+ // requires no word shuffling. For final XORing step we transpose the
+ // matrix by interleaving 32- and then 64-bit words, which allows us to
+ // do XOR in NEON registers.
+ //
+ adr x3, CTRINC // ... and ROT8
+ ld1 {v30.4s-v31.4s}, [x3]
+
+ // x0..15[0-3] = s0..3[0..3]
+ mov x4, x0
+ ld4r { v0.4s- v3.4s}, [x4], #16
+ ld4r { v4.4s- v7.4s}, [x4], #16
+ ld4r { v8.4s-v11.4s}, [x4], #16
+ ld4r {v12.4s-v15.4s}, [x4]
+
+ // x12 += counter values 0-3
+ add v12.4s, v12.4s, v30.4s
+
+ mov x3, #10
+
+.Ldoubleround4:
+ // x0 += x4, x12 = rotl32(x12 ^ x0, 16)
+ // x1 += x5, x13 = rotl32(x13 ^ x1, 16)
+ // x2 += x6, x14 = rotl32(x14 ^ x2, 16)
+ // x3 += x7, x15 = rotl32(x15 ^ x3, 16)
+ add v0.4s, v0.4s, v4.4s
+ add v1.4s, v1.4s, v5.4s
+ add v2.4s, v2.4s, v6.4s
+ add v3.4s, v3.4s, v7.4s
+
+ eor v12.16b, v12.16b, v0.16b
+ eor v13.16b, v13.16b, v1.16b
+ eor v14.16b, v14.16b, v2.16b
+ eor v15.16b, v15.16b, v3.16b
+
+ rev32 v12.8h, v12.8h
+ rev32 v13.8h, v13.8h
+ rev32 v14.8h, v14.8h
+ rev32 v15.8h, v15.8h
+
+ // x8 += x12, x4 = rotl32(x4 ^ x8, 12)
+ // x9 += x13, x5 = rotl32(x5 ^ x9, 12)
+ // x10 += x14, x6 = rotl32(x6 ^ x10, 12)
+ // x11 += x15, x7 = rotl32(x7 ^ x11, 12)
+ add v8.4s, v8.4s, v12.4s
+ add v9.4s, v9.4s, v13.4s
+ add v10.4s, v10.4s, v14.4s
+ add v11.4s, v11.4s, v15.4s
+
+ eor v16.16b, v4.16b, v8.16b
+ eor v17.16b, v5.16b, v9.16b
+ eor v18.16b, v6.16b, v10.16b
+ eor v19.16b, v7.16b, v11.16b
+
+ shl v4.4s, v16.4s, #12
+ shl v5.4s, v17.4s, #12
+ shl v6.4s, v18.4s, #12
+ shl v7.4s, v19.4s, #12
+
+ sri v4.4s, v16.4s, #20
+ sri v5.4s, v17.4s, #20
+ sri v6.4s, v18.4s, #20
+ sri v7.4s, v19.4s, #20
+
+ // x0 += x4, x12 = rotl32(x12 ^ x0, 8)
+ // x1 += x5, x13 = rotl32(x13 ^ x1, 8)
+ // x2 += x6, x14 = rotl32(x14 ^ x2, 8)
+ // x3 += x7, x15 = rotl32(x15 ^ x3, 8)
+ add v0.4s, v0.4s, v4.4s
+ add v1.4s, v1.4s, v5.4s
+ add v2.4s, v2.4s, v6.4s
+ add v3.4s, v3.4s, v7.4s
+
+ eor v12.16b, v12.16b, v0.16b
+ eor v13.16b, v13.16b, v1.16b
+ eor v14.16b, v14.16b, v2.16b
+ eor v15.16b, v15.16b, v3.16b
+
+ tbl v12.16b, {v12.16b}, v31.16b
+ tbl v13.16b, {v13.16b}, v31.16b
+ tbl v14.16b, {v14.16b}, v31.16b
+ tbl v15.16b, {v15.16b}, v31.16b
+
+ // x8 += x12, x4 = rotl32(x4 ^ x8, 7)
+ // x9 += x13, x5 = rotl32(x5 ^ x9, 7)
+ // x10 += x14, x6 = rotl32(x6 ^ x10, 7)
+ // x11 += x15, x7 = rotl32(x7 ^ x11, 7)
+ add v8.4s, v8.4s, v12.4s
+ add v9.4s, v9.4s, v13.4s
+ add v10.4s, v10.4s, v14.4s
+ add v11.4s, v11.4s, v15.4s
+
+ eor v16.16b, v4.16b, v8.16b
+ eor v17.16b, v5.16b, v9.16b
+ eor v18.16b, v6.16b, v10.16b
+ eor v19.16b, v7.16b, v11.16b
+
+ shl v4.4s, v16.4s, #7
+ shl v5.4s, v17.4s, #7
+ shl v6.4s, v18.4s, #7
+ shl v7.4s, v19.4s, #7
+
+ sri v4.4s, v16.4s, #25
+ sri v5.4s, v17.4s, #25
+ sri v6.4s, v18.4s, #25
+ sri v7.4s, v19.4s, #25
+
+ // x0 += x5, x15 = rotl32(x15 ^ x0, 16)
+ // x1 += x6, x12 = rotl32(x12 ^ x1, 16)
+ // x2 += x7, x13 = rotl32(x13 ^ x2, 16)
+ // x3 += x4, x14 = rotl32(x14 ^ x3, 16)
+ add v0.4s, v0.4s, v5.4s
+ add v1.4s, v1.4s, v6.4s
+ add v2.4s, v2.4s, v7.4s
+ add v3.4s, v3.4s, v4.4s
+
+ eor v15.16b, v15.16b, v0.16b
+ eor v12.16b, v12.16b, v1.16b
+ eor v13.16b, v13.16b, v2.16b
+ eor v14.16b, v14.16b, v3.16b
+
+ rev32 v15.8h, v15.8h
+ rev32 v12.8h, v12.8h
+ rev32 v13.8h, v13.8h
+ rev32 v14.8h, v14.8h
+
+ // x10 += x15, x5 = rotl32(x5 ^ x10, 12)
+ // x11 += x12, x6 = rotl32(x6 ^ x11, 12)
+ // x8 += x13, x7 = rotl32(x7 ^ x8, 12)
+ // x9 += x14, x4 = rotl32(x4 ^ x9, 12)
+ add v10.4s, v10.4s, v15.4s
+ add v11.4s, v11.4s, v12.4s
+ add v8.4s, v8.4s, v13.4s
+ add v9.4s, v9.4s, v14.4s
+
+ eor v16.16b, v5.16b, v10.16b
+ eor v17.16b, v6.16b, v11.16b
+ eor v18.16b, v7.16b, v8.16b
+ eor v19.16b, v4.16b, v9.16b
+
+ shl v5.4s, v16.4s, #12
+ shl v6.4s, v17.4s, #12
+ shl v7.4s, v18.4s, #12
+ shl v4.4s, v19.4s, #12
+
+ sri v5.4s, v16.4s, #20
+ sri v6.4s, v17.4s, #20
+ sri v7.4s, v18.4s, #20
+ sri v4.4s, v19.4s, #20
+
+ // x0 += x5, x15 = rotl32(x15 ^ x0, 8)
+ // x1 += x6, x12 = rotl32(x12 ^ x1, 8)
+ // x2 += x7, x13 = rotl32(x13 ^ x2, 8)
+ // x3 += x4, x14 = rotl32(x14 ^ x3, 8)
+ add v0.4s, v0.4s, v5.4s
+ add v1.4s, v1.4s, v6.4s
+ add v2.4s, v2.4s, v7.4s
+ add v3.4s, v3.4s, v4.4s
+
+ eor v15.16b, v15.16b, v0.16b
+ eor v12.16b, v12.16b, v1.16b
+ eor v13.16b, v13.16b, v2.16b
+ eor v14.16b, v14.16b, v3.16b
+
+ tbl v15.16b, {v15.16b}, v31.16b
+ tbl v12.16b, {v12.16b}, v31.16b
+ tbl v13.16b, {v13.16b}, v31.16b
+ tbl v14.16b, {v14.16b}, v31.16b
+
+ // x10 += x15, x5 = rotl32(x5 ^ x10, 7)
+ // x11 += x12, x6 = rotl32(x6 ^ x11, 7)
+ // x8 += x13, x7 = rotl32(x7 ^ x8, 7)
+ // x9 += x14, x4 = rotl32(x4 ^ x9, 7)
+ add v10.4s, v10.4s, v15.4s
+ add v11.4s, v11.4s, v12.4s
+ add v8.4s, v8.4s, v13.4s
+ add v9.4s, v9.4s, v14.4s
+
+ eor v16.16b, v5.16b, v10.16b
+ eor v17.16b, v6.16b, v11.16b
+ eor v18.16b, v7.16b, v8.16b
+ eor v19.16b, v4.16b, v9.16b
+
+ shl v5.4s, v16.4s, #7
+ shl v6.4s, v17.4s, #7
+ shl v7.4s, v18.4s, #7
+ shl v4.4s, v19.4s, #7
+
+ sri v5.4s, v16.4s, #25
+ sri v6.4s, v17.4s, #25
+ sri v7.4s, v18.4s, #25
+ sri v4.4s, v19.4s, #25
+
+ subs x3, x3, #1
+ b.ne .Ldoubleround4
+
+ ld4r {v16.4s-v19.4s}, [x0], #16
+ ld4r {v20.4s-v23.4s}, [x0], #16
+
+ // x12 += counter values 0-3
+ add v12.4s, v12.4s, v30.4s
+
+ // x0[0-3] += s0[0]
+ // x1[0-3] += s0[1]
+ // x2[0-3] += s0[2]
+ // x3[0-3] += s0[3]
+ add v0.4s, v0.4s, v16.4s
+ add v1.4s, v1.4s, v17.4s
+ add v2.4s, v2.4s, v18.4s
+ add v3.4s, v3.4s, v19.4s
+
+ ld4r {v24.4s-v27.4s}, [x0], #16
+ ld4r {v28.4s-v31.4s}, [x0]
+
+ // x4[0-3] += s1[0]
+ // x5[0-3] += s1[1]
+ // x6[0-3] += s1[2]
+ // x7[0-3] += s1[3]
+ add v4.4s, v4.4s, v20.4s
+ add v5.4s, v5.4s, v21.4s
+ add v6.4s, v6.4s, v22.4s
+ add v7.4s, v7.4s, v23.4s
+
+ // x8[0-3] += s2[0]
+ // x9[0-3] += s2[1]
+ // x10[0-3] += s2[2]
+ // x11[0-3] += s2[3]
+ add v8.4s, v8.4s, v24.4s
+ add v9.4s, v9.4s, v25.4s
+ add v10.4s, v10.4s, v26.4s
+ add v11.4s, v11.4s, v27.4s
+
+ // x12[0-3] += s3[0]
+ // x13[0-3] += s3[1]
+ // x14[0-3] += s3[2]
+ // x15[0-3] += s3[3]
+ add v12.4s, v12.4s, v28.4s
+ add v13.4s, v13.4s, v29.4s
+ add v14.4s, v14.4s, v30.4s
+ add v15.4s, v15.4s, v31.4s
+
+ // interleave 32-bit words in state n, n+1
+ zip1 v16.4s, v0.4s, v1.4s
+ zip2 v17.4s, v0.4s, v1.4s
+ zip1 v18.4s, v2.4s, v3.4s
+ zip2 v19.4s, v2.4s, v3.4s
+ zip1 v20.4s, v4.4s, v5.4s
+ zip2 v21.4s, v4.4s, v5.4s
+ zip1 v22.4s, v6.4s, v7.4s
+ zip2 v23.4s, v6.4s, v7.4s
+ zip1 v24.4s, v8.4s, v9.4s
+ zip2 v25.4s, v8.4s, v9.4s
+ zip1 v26.4s, v10.4s, v11.4s
+ zip2 v27.4s, v10.4s, v11.4s
+ zip1 v28.4s, v12.4s, v13.4s
+ zip2 v29.4s, v12.4s, v13.4s
+ zip1 v30.4s, v14.4s, v15.4s
+ zip2 v31.4s, v14.4s, v15.4s
+
+ // interleave 64-bit words in state n, n+2
+ zip1 v0.2d, v16.2d, v18.2d
+ zip2 v4.2d, v16.2d, v18.2d
+ zip1 v8.2d, v17.2d, v19.2d
+ zip2 v12.2d, v17.2d, v19.2d
+ ld1 {v16.16b-v19.16b}, [x2], #64
+
+ zip1 v1.2d, v20.2d, v22.2d
+ zip2 v5.2d, v20.2d, v22.2d
+ zip1 v9.2d, v21.2d, v23.2d
+ zip2 v13.2d, v21.2d, v23.2d
+ ld1 {v20.16b-v23.16b}, [x2], #64
+
+ zip1 v2.2d, v24.2d, v26.2d
+ zip2 v6.2d, v24.2d, v26.2d
+ zip1 v10.2d, v25.2d, v27.2d
+ zip2 v14.2d, v25.2d, v27.2d
+ ld1 {v24.16b-v27.16b}, [x2], #64
+
+ zip1 v3.2d, v28.2d, v30.2d
+ zip2 v7.2d, v28.2d, v30.2d
+ zip1 v11.2d, v29.2d, v31.2d
+ zip2 v15.2d, v29.2d, v31.2d
+ ld1 {v28.16b-v31.16b}, [x2]
+
+ // xor with corresponding input, write to output
+ eor v16.16b, v16.16b, v0.16b
+ eor v17.16b, v17.16b, v1.16b
+ eor v18.16b, v18.16b, v2.16b
+ eor v19.16b, v19.16b, v3.16b
+ eor v20.16b, v20.16b, v4.16b
+ eor v21.16b, v21.16b, v5.16b
+ st1 {v16.16b-v19.16b}, [x1], #64
+ eor v22.16b, v22.16b, v6.16b
+ eor v23.16b, v23.16b, v7.16b
+ eor v24.16b, v24.16b, v8.16b
+ eor v25.16b, v25.16b, v9.16b
+ st1 {v20.16b-v23.16b}, [x1], #64
+ eor v26.16b, v26.16b, v10.16b
+ eor v27.16b, v27.16b, v11.16b
+ eor v28.16b, v28.16b, v12.16b
+ st1 {v24.16b-v27.16b}, [x1], #64
+ eor v29.16b, v29.16b, v13.16b
+ eor v30.16b, v30.16b, v14.16b
+ eor v31.16b, v31.16b, v15.16b
+ st1 {v28.16b-v31.16b}, [x1]
+
+ ret
+ENDPROC(chacha20_4block_xor_neon)
+
+CTRINC: .word 0, 1, 2, 3
+ROT8: .word 0x02010003, 0x06050407, 0x0a09080b, 0x0e0d0c0f
diff --git a/arch/arm64/crypto/chacha20-neon-glue.c b/arch/arm64/crypto/chacha20-neon-glue.c
new file mode 100644
index 000000000000..a7f2337d46cf
--- /dev/null
+++ b/arch/arm64/crypto/chacha20-neon-glue.c
@@ -0,0 +1,127 @@
+/*
+ * ChaCha20 256-bit cipher algorithm, RFC7539, arm64 NEON functions
+ *
+ * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on:
+ * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code
+ *
+ * Copyright (C) 2015 Martin Willi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/chacha20.h>
+#include <crypto/internal/skcipher.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+
+asmlinkage void chacha20_block_xor_neon(u32 *state, u8 *dst, const u8 *src);
+asmlinkage void chacha20_4block_xor_neon(u32 *state, u8 *dst, const u8 *src);
+
+static void chacha20_doneon(u32 *state, u8 *dst, const u8 *src,
+ unsigned int bytes)
+{
+ u8 buf[CHACHA20_BLOCK_SIZE];
+
+ while (bytes >= CHACHA20_BLOCK_SIZE * 4) {
+ chacha20_4block_xor_neon(state, dst, src);
+ bytes -= CHACHA20_BLOCK_SIZE * 4;
+ src += CHACHA20_BLOCK_SIZE * 4;
+ dst += CHACHA20_BLOCK_SIZE * 4;
+ state[12] += 4;
+ }
+ while (bytes >= CHACHA20_BLOCK_SIZE) {
+ chacha20_block_xor_neon(state, dst, src);
+ bytes -= CHACHA20_BLOCK_SIZE;
+ src += CHACHA20_BLOCK_SIZE;
+ dst += CHACHA20_BLOCK_SIZE;
+ state[12]++;
+ }
+ if (bytes) {
+ memcpy(buf, src, bytes);
+ chacha20_block_xor_neon(state, buf, buf);
+ memcpy(dst, buf, bytes);
+ }
+}
+
+static int chacha20_neon(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct chacha20_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct skcipher_walk walk;
+ u32 state[16];
+ int err;
+
+ if (req->cryptlen <= CHACHA20_BLOCK_SIZE)
+ return crypto_chacha20_crypt(req);
+
+ err = skcipher_walk_virt(&walk, req, true);
+
+ crypto_chacha20_init(state, ctx, walk.iv);
+
+ kernel_neon_begin();
+ while (walk.nbytes > 0) {
+ unsigned int nbytes = walk.nbytes;
+
+ if (nbytes < walk.total)
+ nbytes = round_down(nbytes, walk.stride);
+
+ chacha20_doneon(state, walk.dst.virt.addr, walk.src.virt.addr,
+ nbytes);
+ err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+ }
+ kernel_neon_end();
+
+ return err;
+}
+
+static struct skcipher_alg alg = {
+ .base.cra_name = "chacha20",
+ .base.cra_driver_name = "chacha20-neon",
+ .base.cra_priority = 300,
+ .base.cra_blocksize = 1,
+ .base.cra_ctxsize = sizeof(struct chacha20_ctx),
+ .base.cra_alignmask = 1,
+ .base.cra_module = THIS_MODULE,
+
+ .min_keysize = CHACHA20_KEY_SIZE,
+ .max_keysize = CHACHA20_KEY_SIZE,
+ .ivsize = CHACHA20_IV_SIZE,
+ .chunksize = CHACHA20_BLOCK_SIZE,
+ .walksize = 4 * CHACHA20_BLOCK_SIZE,
+ .setkey = crypto_chacha20_setkey,
+ .encrypt = chacha20_neon,
+ .decrypt = chacha20_neon,
+};
+
+static int __init chacha20_simd_mod_init(void)
+{
+ if (!(elf_hwcap & HWCAP_ASIMD))
+ return -ENODEV;
+
+ return crypto_register_skcipher(&alg);
+}
+
+static void __exit chacha20_simd_mod_fini(void)
+{
+ crypto_unregister_skcipher(&alg);
+}
+
+module_init(chacha20_simd_mod_init);
+module_exit(chacha20_simd_mod_fini);
+
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("chacha20");
--
2.7.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox