From: Dave Jiang <dave.jiang@intel.com>
To: Robert Richter <rrichter@amd.com>
Cc: linux-cxl@vger.kernel.org, dave@stgolabs.net,
jonathan.cameron@huawei.com, alison.schofield@intel.com,
vishal.l.verma@intel.com, ira.weiny@intel.com,
dan.j.williams@intel.com
Subject: Re: [REWORK][PATCH] cxl: Remove core/acpi.c and cxl core dependency on ACPI
Date: Fri, 11 Jul 2025 07:58:27 -0700 [thread overview]
Message-ID: <108cc808-ff36-4386-bc63-6f38a13dccbd@intel.com> (raw)
In-Reply-To: <aHD3cDOZ4R3Vm7YA@rric.localdomain>
On 7/11/25 4:37 AM, Robert Richter wrote:
> Hi Dave,
>
> On 03.07.25 16:49:11, Dave Jiang wrote:
>>
>>
>> On 6/10/25 10:29 AM, Dave Jiang wrote:
>>> It was a mistake to introduce core/acpi.c and putting ACPI dependency on
>>> cxl_core when adding the extended linear cache support. Add a callback
>>> in the cxl_root_decoder to retrieve the extended linear cache size from
>>> ACPI via the cxl_acpi driver.
>>>
>>> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
>>
>> Applied to cxl/next
>> 1a45e1cd694fdf2d2a22e3c70a6917ff39fe77ab
>
> I am sorry to come back to this patch that late in the process. While
> rebasing my current region rework and address translation patches I
> came across your patch and realized that I have a much more simpler
> rework of that in my patch queue. I extracted that patch below from my
> series I am working on. Could you take a look at it? The changes are
> less intrusive and part of my rework required for address translation.
> If it looks good to you and during review, I rather prefer to replace
> your patch with this one. Note that I have follow on patches that
> reduce more code and remove the cxl_extended_linear_cache_resize()
> function entirely.
>
> Patch below bases on:
>
> ac0fe6a57317 cxl: make cxl_bus_type constant
Hi Robert. I do like the simplicity of this. So lets go with that. Can you please post your patch directly to the mailing list as a stand alone? I'll drop my patch from cxl/next. We still should refactor the hpa_to_spa callback function into the cxl_rd_ops struct though. But that is a much smaller change.
DJ
>
> Many thanks,
>
> -Robert
>
>
>
>
> From fd3f1f5b33313bb10a2e51861031015ac48a8cd1 Mon Sep 17 00:00:00 2001
> From: Robert Richter <rrichter@amd.com>
> Date: Fri, 11 Jul 2025 11:56:56 +0200
> Subject: [PATCH] cxl: Remove core/acpi.c and cxl core dependency on ACPI
>
> From Dave [1]:
>
> """
> It was a mistake to introduce core/acpi.c and putting ACPI dependency on
> cxl_core when adding the extended linear cache support.
> """
>
> Current implementation calls hmat_get_extended_linear_cache_size() of
> the ACPI subsystem. That external reference causes issue running
> cxl_test as there is no way to "mock" that function and ignore it when
> using cxl test.
>
> Instead of working around that using cxlrd ops and extensively
> expanding cxl_test code [1], just move HMAT calls out of the core
> module to cxl_acpi. Implement this by adding a @cache_size member to
> struct cxl_root_decoder. During initialization the cache size is
> determined and added to the root decoder object in cxl_acpi. Later on
> in cxl_core the cache_size parameter is used to setup extended linear
> caching.
>
> [1] https://patch.msgid.link/20250610172938.139428-1-dave.jiang@intel.com
>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> ---
> drivers/cxl/acpi.c | 59 +++++++++++++++++++++++++++++++++++++++
> drivers/cxl/core/Makefile | 1 -
> drivers/cxl/core/acpi.c | 11 --------
> drivers/cxl/core/core.h | 2 --
> drivers/cxl/core/region.c | 7 +----
> drivers/cxl/cxl.h | 1 +
> 6 files changed, 61 insertions(+), 20 deletions(-)
> delete mode 100644 drivers/cxl/core/acpi.c
>
> diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
> index a1a99ec3f12c..712624cba2b6 100644
> --- a/drivers/cxl/acpi.c
> +++ b/drivers/cxl/acpi.c
> @@ -335,6 +335,63 @@ static int add_or_reset_cxl_resource(struct resource *parent, struct resource *r
> return rc;
> }
>
> +static int cxl_acpi_set_cache_size(struct cxl_root_decoder *cxlrd)
> +{
> + struct cxl_decoder *cxld = &cxlrd->cxlsd.cxld;
> + struct range *hpa = &cxld->hpa_range;
> + resource_size_t size = range_len(hpa);
> + resource_size_t start = hpa->start;
> + resource_size_t cache_size;
> + struct resource res;
> + int nid, rc;
> +
> + res = DEFINE_RES(start, size, 0);
> + nid = phys_to_target_node(start);
> +
> + rc = hmat_get_extended_linear_cache_size(&res, nid, &cache_size);
> + if (rc)
> + return rc;
> +
> + /*
> + * The cache range is expected to be within the CFMWS.
> + * Currently there is only support cache_size == cxl_size. CXL
> + * size is then half of the total CFMWS window size.
> + */
> + size = size >> 1;
> + if (cache_size && size != cache_size) {
> + dev_warn(&cxld->dev,
> + "Extended Linear Cache size %pa != CXL size %pa. No Support!",
> + &cache_size, &size);
> + return -ENXIO;
> + }
> +
> + cxlrd->cache_size = cache_size;
> +
> + return 0;
> +}
> +
> +static void cxl_setup_extended_linear_cache(struct cxl_root_decoder *cxlrd)
> +{
> + int rc;
> +
> + rc = cxl_acpi_set_cache_size(cxlrd);
> + if (!rc)
> + return;
> +
> + if (rc != -EOPNOTSUPP) {
> + /*
> + * Failing to support extended linear cache region resize does not
> + * prevent the region from functioning. Only causes cxl list showing
> + * incorrect region size.
> + */
> + dev_warn(cxlrd->cxlsd.cxld.dev.parent,
> + "Extended linear cache calculation failed rc:%d\n", rc);
> + }
> +
> + /* Ignoring return code */
> + cxlrd->cache_size = 0;
> +}
> +
> DEFINE_FREE(put_cxlrd, struct cxl_root_decoder *,
> if (!IS_ERR_OR_NULL(_T)) put_device(&_T->cxlsd.cxld.dev))
> DEFINE_FREE(del_cxl_resource, struct resource *, if (_T) del_cxl_resource(_T))
> @@ -394,6 +451,8 @@ static int __cxl_parse_cfmws(struct acpi_cedt_cfmws *cfmws,
> ig = CXL_DECODER_MIN_GRANULARITY;
> cxld->interleave_granularity = ig;
>
> + cxl_setup_extended_linear_cache(cxlrd);
> +
> if (cfmws->interleave_arithmetic == ACPI_CEDT_CFMWS_ARITHMETIC_XOR) {
> if (ways != 1 && ways != 3) {
> cxims_ctx = (struct cxl_cxims_context) {
> diff --git a/drivers/cxl/core/Makefile b/drivers/cxl/core/Makefile
> index 79e2ef81fde8..5ad8fef210b5 100644
> --- a/drivers/cxl/core/Makefile
> +++ b/drivers/cxl/core/Makefile
> @@ -15,7 +15,6 @@ cxl_core-y += hdm.o
> cxl_core-y += pmu.o
> cxl_core-y += cdat.o
> cxl_core-y += ras.o
> -cxl_core-y += acpi.o
> cxl_core-$(CONFIG_TRACING) += trace.o
> cxl_core-$(CONFIG_CXL_REGION) += region.o
> cxl_core-$(CONFIG_CXL_MCE) += mce.o
> diff --git a/drivers/cxl/core/acpi.c b/drivers/cxl/core/acpi.c
> deleted file mode 100644
> index f13b4dae6ac5..000000000000
> --- a/drivers/cxl/core/acpi.c
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/* Copyright(c) 2024 Intel Corporation. All rights reserved. */
> -#include <linux/acpi.h>
> -#include "cxl.h"
> -#include "core.h"
> -
> -int cxl_acpi_get_extended_linear_cache_size(struct resource *backing_res,
> - int nid, resource_size_t *size)
> -{
> - return hmat_get_extended_linear_cache_size(backing_res, nid, size);
> -}
> diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
> index 29b61828a847..9462aea9ce9d 100644
> --- a/drivers/cxl/core/core.h
> +++ b/drivers/cxl/core/core.h
> @@ -120,8 +120,6 @@ int cxl_port_get_switch_dport_bandwidth(struct cxl_port *port,
> int cxl_ras_init(void);
> void cxl_ras_exit(void);
> int cxl_gpf_port_setup(struct cxl_dport *dport);
> -int cxl_acpi_get_extended_linear_cache_size(struct resource *backing_res,
> - int nid, resource_size_t *size);
>
> #ifdef CONFIG_CXL_FEATURES
> struct cxl_feat_entry *
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 6e5e1460068d..bc542a7142c0 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -3282,15 +3282,10 @@ static int cxl_extended_linear_cache_resize(struct cxl_region *cxlr,
> {
> struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(cxlr->dev.parent);
> struct cxl_region_params *p = &cxlr->params;
> - int nid = phys_to_target_node(res->start);
> resource_size_t size = resource_size(res);
> resource_size_t cache_size, start;
> - int rc;
> -
> - rc = cxl_acpi_get_extended_linear_cache_size(res, nid, &cache_size);
> - if (rc)
> - return rc;
>
> + cache_size = cxlrd->cache_size;
> if (!cache_size)
> return 0;
>
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index e7b66ca1d423..4643a95ca111 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -432,6 +432,7 @@ typedef u64 (*cxl_hpa_to_spa_fn)(struct cxl_root_decoder *cxlrd, u64 hpa);
> */
> struct cxl_root_decoder {
> struct resource *res;
> + resource_size_t cache_size;
> atomic_t region_id;
> cxl_hpa_to_spa_fn hpa_to_spa;
> void *platform_data;
next prev parent reply other threads:[~2025-07-11 14:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-10 17:29 [PATCH v3] cxl: Remove core/acpi.c and cxl core dependency on ACPI Dave Jiang
2025-06-11 13:30 ` Jonathan Cameron
2025-07-02 20:53 ` Alison Schofield
2025-07-03 23:48 ` Dave Jiang
2025-07-03 23:49 ` Dave Jiang
2025-07-11 11:37 ` [REWORK][PATCH] " Robert Richter
2025-07-11 14:58 ` Dave Jiang [this message]
2025-07-11 15:17 ` Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=108cc808-ff36-4386-bc63-6f38a13dccbd@intel.com \
--to=dave.jiang@intel.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox