From: Ben Widawsky <ben.widawsky@intel.com>
To: linux-cxl@vger.kernel.org, Chet Douglas <chet.r.douglas@intel.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Jonathan Cameron <Jonathan.Cameron@Huawei.com>,
Vishal Verma <vishal.l.verma@intel.com>
Subject: [RFC PATCH 12/27] cxl: Flesh out register names
Date: Fri, 15 Oct 2021 22:15:16 -0700 [thread overview]
Message-ID: <20211016051531.622613-13-ben.widawsky@intel.com> (raw)
In-Reply-To: <20211016051531.622613-1-ben.widawsky@intel.com>
Get a better naming scheme in place for upcoming additions. To solidify
the schema, add all the DVSEC identifiers to start with.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
See:
https://lore.kernel.org/linux-pci/20210913190131.xiiszmno46qie7v5@intel.com/
---
drivers/cxl/core/regs.c | 14 ++++++++------
drivers/cxl/pci.h | 38 ++++++++++++++++++++++++++++++--------
2 files changed, 38 insertions(+), 14 deletions(-)
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index c8ab8880b81b..b837196fbf39 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -253,9 +253,11 @@ static void cxl_decode_regblock(u32 reg_lo, u32 reg_hi,
struct cxl_register_map *map)
{
map->block_offset =
- ((u64)reg_hi << 32) | (reg_lo & CXL_REGLOC_ADDR_MASK);
- map->barno = FIELD_GET(CXL_REGLOC_BIR_MASK, reg_lo);
- map->reg_type = FIELD_GET(CXL_REGLOC_RBI_MASK, reg_lo);
+ ((u64)reg_hi << 32) |
+ (reg_lo & DVSEC_REGISTER_LOCATOR_BLOCK_OFFSET_LOW_MASK);
+ map->barno = FIELD_GET(DVSEC_REGISTER_LOCATOR_BIR_MASK, reg_lo);
+ map->reg_type =
+ FIELD_GET(DVSEC_REGISTER_LOCATOR_BLOCK_IDENTIFIER_MASK, reg_lo);
}
/**
@@ -276,15 +278,15 @@ int cxl_find_regblock(struct pci_dev *pdev, enum cxl_regloc_type type,
int regloc, i;
regloc = pci_find_dvsec_capability(pdev, PCI_DVSEC_VENDOR_ID_CXL,
- PCI_DVSEC_ID_CXL_REGLOC_DVSEC_ID);
+ CXL_DVSEC_REGISTER_LOCATOR);
if (!regloc)
return -ENXIO;
pci_read_config_dword(pdev, regloc + PCI_DVSEC_HEADER1, ®loc_size);
regloc_size = FIELD_GET(PCI_DVSEC_HEADER1_LENGTH_MASK, regloc_size);
- regloc += PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET;
- regblocks = (regloc_size - PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET) / 8;
+ regloc += DVSEC_REGISTER_LOCATOR_BLOCK1_OFFSET;
+ regblocks = (regloc_size - DVSEC_REGISTER_LOCATOR_BLOCK1_OFFSET) / 8;
for (i = 0; i < regblocks; i++, regloc += 8) {
u32 reg_lo, reg_hi;
diff --git a/drivers/cxl/pci.h b/drivers/cxl/pci.h
index 12fdcb1b14e5..fe2898b17736 100644
--- a/drivers/cxl/pci.h
+++ b/drivers/cxl/pci.h
@@ -7,17 +7,36 @@
/*
* See section 8.1 Configuration Space Registers in the CXL 2.0
- * Specification
+ * Specification. Names are taken straight from the specification with "CXL" and
+ * "DVSEC" redundancies removed.
*/
#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
#define PCI_DVSEC_VENDOR_ID_CXL 0x1E98
-#define PCI_DVSEC_ID_CXL 0x0
-#define PCI_DVSEC_ID_CXL_REGLOC_DVSEC_ID 0x8
-#define PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET 0xC
+/* 8.1.3: PCIe DVSEC for CXL Device */
+#define CXL_DVSEC_PCIE_DEVICE 0
-/* BAR Indicator Register (BIR) */
-#define CXL_REGLOC_BIR_MASK GENMASK(2, 0)
+/* 8.1.4: Non-CXL Function Map DVSEC */
+#define CXL_DVSEC_FUNCTION_MAP 2
+
+/* 8.1.5: CXL 2.0 Extensions DVSEC for Ports */
+#define CXL_DVSEC_PORT_EXTENSIONS 3
+
+/* 8.1.6: GPF DVSEC for CXL Port */
+#define CXL_DVSEC_PORT_GPF 4
+
+/* 8.1.7: GPF DVSEC for CXL Device */
+#define CXL_DVSEC_DEVICE_GPF 5
+
+/* 8.1.8: PCIe DVSEC for Flex Bus Port */
+#define CXL_DVSEC_PCIE_FLEXBUS_PORT 7
+
+/* 8.1.9: Register Locator DVSEC */
+#define CXL_DVSEC_REGISTER_LOCATOR 8
+#define DVSEC_REGISTER_LOCATOR_BLOCK1_OFFSET 0xC
+#define DVSEC_REGISTER_LOCATOR_BIR_MASK GENMASK(2, 0)
+#define DVSEC_REGISTER_LOCATOR_BLOCK_IDENTIFIER_MASK GENMASK(15, 8)
+#define DVSEC_REGISTER_LOCATOR_BLOCK_OFFSET_LOW_MASK GENMASK(31, 16)
/* Register Block Identifier (RBI) */
enum cxl_regloc_type {
@@ -28,8 +47,11 @@ enum cxl_regloc_type {
CXL_REGLOC_RBI_TYPES
};
-#define CXL_REGLOC_RBI_MASK GENMASK(15, 8)
-#define CXL_REGLOC_ADDR_MASK GENMASK(31, 16)
+/* 8.1.10: MLD DVSEC */
+#define CXL_DVSEC_MLD 9
+
+/* 14.16.1 CXL Device Test Capability Advertisement */
+#define CXL_DVSEC_PCIE_TEST_CAPABILITY 10
#define cxl_reg_block(pdev, map) \
((resource_size_t)(pci_resource_start(pdev, (map)->barno) + \
--
2.33.1
next prev parent reply other threads:[~2021-10-16 5:15 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-16 5:15 [RFC PATCH 00/27] CXL Region Creation / HDM decoder programming Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 01/27] cxl: Rename CXL_MEM to CXL_PCI Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 02/27] cxl: Move register block enumeration to core Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 03/27] cxl/acpi: Map component registers for Root Ports Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 04/27] cxl: Add helper for new drivers Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 05/27] cxl/core: Convert decoder range to resource Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 06/27] cxl: Introduce endpoint decoders Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 07/27] cxl/port: Introduce a port driver Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 08/27] cxl/acpi: Map single port host bridge component registers Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 09/27] cxl/core: Store global list of root ports Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 10/27] cxl/acpi: Rescan bus at probe completion Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 11/27] cxl/core: Store component register base for memdevs Ben Widawsky
2021-10-16 5:15 ` Ben Widawsky [this message]
2021-10-16 5:15 ` [RFC PATCH 13/27] cxl/core: Introduce API to scan switch ports Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 14/27] cxl: Introduce cxl_mem driver Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 15/27] cxl: Disable switch hierarchies for now Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 16/27] cxl/region: Add region creation ABI Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 17/27] cxl/region: Introduce concept of region configuration Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 18/27] cxl/region: Introduce a cxl_region driver Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 19/27] cxl/acpi: Handle address space allocation Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 20/27] cxl/region: Address " Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 21/27] cxl/region: Implement XHB verification Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 22/27] cxl/region: HB port config verification Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 23/27] cxl/region: Record host bridge target list Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 24/27] cxl/mem: Store the endpoint's uport Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 25/27] cxl/region: Gather HDM decoder resources Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 26/27] cxl: Program decoders for regions Ben Widawsky
2021-10-18 23:30 ` [RFC v2 " Ben Widawsky
2021-10-16 5:15 ` [RFC PATCH 27/27] dont-merge: My QEMU CFMWS is wrong Ben Widawsky
2021-10-18 23:36 ` Ben Widawsky
2021-10-18 0:15 ` [RFC PATCH 00/27] CXL Region Creation / HDM decoder programming Ben Widawsky
2021-10-21 14:29 ` Ben Widawsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211016051531.622613-13-ben.widawsky@intel.com \
--to=ben.widawsky@intel.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=alison.schofield@intel.com \
--cc=chet.r.douglas@intel.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox