[PATCH v4 21/42] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)

[Jonathan Cameron <Jonathan.Cameron@huawei.com>]

From: Ben Widawsky <ben.widawsky@intel.com>

A device's volatile and persistent memory are known Host Defined Memory
(HDM) regions. The mechanism by which the device is programmed to claim
the addresses associated with those regions is through dedicated logic
known as the HDM decoder. In order to allow the OS to properly program
the HDMs, the HDM decoders must be modeled.

There are two ways the HDM decoders can be implemented, the legacy
mechanism is through the PCIe DVSEC programming from CXL 1.1 (8.1.3.8),
and MMIO is found in 8.2.5.12 of the spec. For now, 8.1.3.8 is not
implemented.

Much of CXL device logic is implemented in cxl-utils. The HDM decoder
however is implemented directly by the device implementation.
Whilst the implementation currently does no validity checks on the
encoder set up, future work will add sanity checking specific to
the type of cxl component.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 hw/mem/cxl_type3.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index c4021d2434..0033b1b28e 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -61,6 +61,56 @@ static void build_dvsecs(CXLType3Dev *ct3d)
                                REG_LOC_DVSEC_REVID, dvsec);
 }
 
+static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
+{
+    ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
+    uint32_t *cache_mem = cregs->cache_mem_registers;
+
+    assert(which == 0);
+
+    /* TODO: Sanity checks that the decoder is possible */
+    ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
+    ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, ERROR, 0);
+
+    ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
+}
+
+static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
+                           unsigned size)
+{
+    CXLComponentState *cxl_cstate = opaque;
+    ComponentRegisters *cregs = &cxl_cstate->crb;
+    CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
+    uint32_t *cache_mem = cregs->cache_mem_registers;
+    bool should_commit = false;
+    int which_hdm = -1;
+
+    assert(size == 4);
+
+    switch (offset) {
+    case A_CXL_HDM_DECODER0_CTRL:
+        should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+        which_hdm = 0;
+        break;
+    default:
+        break;
+    }
+
+    stl_le_p((uint8_t *)cache_mem + offset, value);
+    if (should_commit) {
+        hdm_decoder_commit(ct3d, which_hdm);
+    }
+}
+
+static void ct3_finalize(Object *obj)
+{
+    CXLType3Dev *ct3d = CT3(obj);
+    CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+    ComponentRegisters *regs = &cxl_cstate->crb;
+
+    g_free((void *)regs->special_ops);
+}
+
 static void cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
 {
     MemoryRegion *mr;
@@ -103,6 +153,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
     ct3d->cxl_cstate.pdev = pci_dev;
     build_dvsecs(ct3d);
 
+    regs->special_ops = g_new0(MemoryRegionOps, 1);
+    regs->special_ops->write = ct3d_reg_write;
+
     cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
                                       TYPE_CXL_TYPE3_DEV);
 
@@ -155,6 +208,7 @@ static const TypeInfo ct3d_info = {
     .parent = TYPE_PCI_DEVICE,
     .class_init = ct3_class_init,
     .instance_size = sizeof(CXLType3Dev),
+    .instance_finalize = ct3_finalize,
     .interfaces = (InterfaceInfo[]) {
         { INTERFACE_CXL_DEVICE },
         { INTERFACE_PCIE_DEVICE },
-- 
2.32.0