Re: [PATCH 1/4] cxl/region: Add a DPA to HPA translation helper

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Tue, 22 Nov 2022 15:07:48 -0800
alison.schofield@intel.com wrote:

> From: Alison Schofield <alison.schofield@intel.com>
> 
> CXL devices may report errors and events using their DPA (device
> physical address). When a CXL device contributes capacity to a
> CXL region, the device's physical addresses are mapped to HPA's.
> (host physical addresses)
> 
> Provide a helper to calculate the HPA when given a DPA, a region,
> and the devices position in the region interleave.
> 
> Verify that the HPA is within the expected ranges that this device
> contributes to the region interleave set.
> 
> The initial use case is translating the DPAs that CXL devices
> report in media error records.
> 
> Signed-off-by: Alison Schofield <alison.schofield@intel.com>
> ---
>  drivers/cxl/core/core.h   |  3 ++
>  drivers/cxl/core/region.c | 80 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 83 insertions(+)
> 
> diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
> index 1d8f87be283f..72b58e53c394 100644
> --- a/drivers/cxl/core/core.h
> +++ b/drivers/cxl/core/core.h
> @@ -67,6 +67,9 @@ static inline struct cxl_ep *cxl_ep_load(struct cxl_port *port,
>  	return xa_load(&port->endpoints, (unsigned long)&cxlmd->dev);
>  }
>  
> +u64 cxl_dpa_to_hpa(u64 dpa, struct cxl_region *cxlr,
> +		   struct cxl_endpoint_decoder *cxled);
> +
>  int cxl_memdev_init(void);
>  void cxl_memdev_exit(void);
>  void cxl_mbox_init(void);
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index f9ae5ad284ff..c847517e766c 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -1865,6 +1865,86 @@ static void cxlr_pmem_unregister(void *dev)
>  	device_unregister(dev);
>  }
>  
> +static bool cxl_is_hpa_in_range(u64 hpa, struct cxl_region *cxlr, int pos)
> +{
> +	struct cxl_region_params *p = &cxlr->params;
> +	int gran = p->interleave_granularity;
> +	int ways = p->interleave_ways;
> +	u64 stride;
> +
> +	/* Is the hpa within this region at all */
> +	if (hpa < p->res->start || hpa > p->res->end) {
> +		dev_dbg(&cxlr->dev,
> +			"Addr trans fail: hpa 0x%llx not in region\n", hpa);
> +		return false;
> +	}
> +	/* Is the hpa in an expected stride for its pos(-ition) */
> +	stride = p->res->start + pos * gran;
> +	do {
> +		if (hpa >= stride && hpa <= stride + gran - 1)
> +			return true;
> +
> +		stride = stride + ways * gran;
> +	} while (stride < p->res->end);
> +
> +	dev_dbg(&cxlr->dev,
> +		"Addr trans fail: hpa 0x%llx not in any stride\n", hpa);
> +
> +	return false;
> +}
> +
> +u64 cxl_dpa_to_hpa(u64 dpa, struct cxl_region *cxlr,
> +		   struct cxl_endpoint_decoder *cxled)
> +{
> +	struct cxl_region_params *p = &cxlr->params;
> +	u64 dpa_offset, hpa_offset, hpa;
> +	int rc, pos = cxled->pos;
> +	u16 eig;
> +	u8 eiw;
> +
> +	rc = ways_to_cxl(p->interleave_ways, &eiw);
> +	if (rc)
> +		return rc;
> +	rc = granularity_to_cxl(p->interleave_granularity, &eig);
> +	if (rc)
> +		return rc;
returning integer as u64, so it won't end up as a useful error code.

> +
> +	/*
> +	 * Reverse the HPA->DPA decode logic defined
> +	 * in the CXL Spec 3.0 Section 8.2.4.19.13
> +	 * Implementation Note: Device Decode Logic
> +	 *
> +	 * The device position in the region interleave
> +	 * set was removed in the HPA->DPA translation.
> +	 * Put it back to reconstruct the HPA.
> +	 */
> +
> +	/* Remove the dpa base */
> +	dpa_offset = dpa - cxl_dpa_resource_start(cxled);
> +
> +	/* Restore the position */
> +	if (eiw <= 8) {
> +		hpa_offset = (dpa_offset & GENMASK_ULL(51, eig + 8)) << eiw;
> +		hpa_offset |= GENMASK_ULL(eig + 8 + eiw, eig + 8)
> +			      & (pos << (eig + 8));
> +	}
> +	if (eiw == 9)
> +		hpa_offset |= BIT(eig + eiw) & (pos & 0x01);
> +	if (eiw == 10)
> +		hpa_offset |= GENMASK_ULL(eig + eiw, eig + 8) & (pos & 0x03);
> +
> +	/* The lower bits remain unchanged */
> +	hpa_offset |= dpa_offset & GENMASK_ULL(eig + 7, 0);
> +
> +	/* Apply the hpa_offset to region base address */
> +	hpa = hpa_offset + p->res->start;
> +
> +	if (!cxl_is_hpa_in_range(hpa, cxlr, cxled->pos))
> +		return 0;
> +
> +	return hpa;
> +}
> +
>  /**
>   * devm_cxl_add_pmem_region() - add a cxl_region-to-nd_region bridge
>   * @cxlr: parent CXL region for this pmem region bridge device