[PATCH 08/19] docs: cxl: Add example commandline for MCTP CXL CCIs

[Jonathan Cameron <Jonathan.Cameron@huawei.com>]

Add initial documentation for the MCTP over I2C management device. At
current time this can only be used with the Aspeed I2C controller which
is only available in aspeed SoCs, though can be added to other
emulated boards.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 docs/system/devices/cxl.rst | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst
index 6ab5f72473..dfe5577599 100644
--- a/docs/system/devices/cxl.rst
+++ b/docs/system/devices/cxl.rst
@@ -406,6 +406,33 @@ OS management of CXL memory devices as described here.
 * CONFIG_CXL_PORT
 * CONFIG_CXL_REGION
 
+
+CCI access via MCTP over I2C
+----------------------------
+
+In order to make use of this device, an I2C controller that supports MCTP
+is required.  The aspeed-i2c controller is an example of such a controller.
+
+Both CXL switches and CXL Type 3 devices support configuration via
+MCTP access to Component Command Interfaces (CCIs) on the devices.
+
+Example configuration:
+
+ -device cxl-upstream,port=33,bus=root_port0,id=us0,multifunction=on,addr=0.0,sn=12345678 \
+ -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
+ -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
+ -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
+ -device cxl-type3,bus=swport0,persistent-memdev=cxl-mem1,id=cxl-pmem0,lsa=cxl-lsa1,sn=3 \
+ -device cxl-type3,bus=swport1,persistent-memdev=cxl-mem2,id=cxl-pmem1,lsa=cxl-lsa2,sn=4 \
+ -device cxl-type3,bus=swport2,persistent-memdev=cxl-mem3,id=cxl-pmem2,lsa=cxl-lsa3,sn=5 \
+ -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=4,target=us0 \
+ -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=5,target=cxl-pmem0 \
+ -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=6,target=cxl-pmem1 \
+ -device i2c_mctp_cxl,bus=aspeed.i2c.bus.0,address=7,target=cxl-pmem2
+
+Guest OS communication with the MCTP CCI can then be established using standard
+MCTP configuration tools.
+
 References
 ----------
 
-- 
2.39.2