Linux CXL
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: Dave Jiang <dave.jiang@intel.com>, Fan Ni <fan.ni@samsung.com>,
	 Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	 Navneet Singh <navneet.singh@intel.com>,
	Jonathan Corbet <corbet@lwn.net>,
	 Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>,
	 Davidlohr Bueso <dave@stgolabs.net>,
	 Alison Schofield <alison.schofield@intel.com>,
	 Vishal Verma <vishal.l.verma@intel.com>,
	Ira Weiny <ira.weiny@intel.com>,
	 linux-cxl@vger.kernel.org, linux-doc@vger.kernel.org,
	 nvdimm@lists.linux.dev, linux-kernel@vger.kernel.org,
	 Li Ming <ming4.li@intel.com>
Subject: [PATCH v5 18/27] cxl/mem: Configure dynamic capacity interrupts
Date: Tue, 29 Oct 2024 15:34:53 -0500	[thread overview]
Message-ID: <20241029-dcd-type2-upstream-v5-18-8739cb67c374@intel.com> (raw)
In-Reply-To: <20241029-dcd-type2-upstream-v5-0-8739cb67c374@intel.com>

From: Navneet Singh <navneet.singh@intel.com>

Dynamic Capacity Devices (DCD) support extent change notifications
through the event log mechanism.  The interrupt mailbox commands were
extended in CXL 3.1 to support these notifications.  Firmware can't
configure DCD events to be FW controlled but can retain control of
memory events.

Configure DCD event log interrupts on devices supporting dynamic
capacity.  Disable DCD if interrupts are not supported.

Care is taken to preserve the interrupt policy set by the FW if FW first
has been selected by the BIOS.

Signed-off-by: Navneet Singh <navneet.singh@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming4.li@intel.com>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
---
Changes:
[Fan: Don't fail probe on DCD irq failure, just disable dcd and print error]
[Jonathan: move zero'ing of policy to this patch]
---
 drivers/cxl/cxlmem.h |  2 ++
 drivers/cxl/pci.c    | 73 ++++++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 62 insertions(+), 13 deletions(-)

diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 204f7bd9197bd1a02de44ef56a345811d2107ab4..16e06b59d7f04762ca73a81740b0d6b2487301af 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -226,7 +226,9 @@ struct cxl_event_interrupt_policy {
 	u8 warn_settings;
 	u8 failure_settings;
 	u8 fatal_settings;
+	u8 dcd_settings;
 } __packed;
+#define CXL_EVENT_INT_POLICY_BASE_SIZE 4 /* info, warn, failure, fatal */
 
 /**
  * struct cxl_event_state - Event log driver state
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index ac085a0b4881fc4f074d23f3606f9a3b7e70d05f..13672b8cad5be4b5a955a91e9faaba0a0acd345a 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -672,23 +672,34 @@ static int cxl_event_get_int_policy(struct cxl_memdev_state *mds,
 }
 
 static int cxl_event_config_msgnums(struct cxl_memdev_state *mds,
-				    struct cxl_event_interrupt_policy *policy)
+				    struct cxl_event_interrupt_policy *policy,
+				    bool native_cxl)
 {
 	struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
+	size_t size_in = CXL_EVENT_INT_POLICY_BASE_SIZE;
 	struct cxl_mbox_cmd mbox_cmd;
 	int rc;
 
-	*policy = (struct cxl_event_interrupt_policy) {
-		.info_settings = CXL_INT_MSI_MSIX,
-		.warn_settings = CXL_INT_MSI_MSIX,
-		.failure_settings = CXL_INT_MSI_MSIX,
-		.fatal_settings = CXL_INT_MSI_MSIX,
-	};
+	/* memory event policy is left if FW has control */
+	if (native_cxl) {
+		*policy = (struct cxl_event_interrupt_policy) {
+			.info_settings = CXL_INT_MSI_MSIX,
+			.warn_settings = CXL_INT_MSI_MSIX,
+			.failure_settings = CXL_INT_MSI_MSIX,
+			.fatal_settings = CXL_INT_MSI_MSIX,
+			.dcd_settings = 0,
+		};
+	}
+
+	if (cxl_dcd_supported(mds)) {
+		policy->dcd_settings = CXL_INT_MSI_MSIX;
+		size_in += sizeof(policy->dcd_settings);
+	}
 
 	mbox_cmd = (struct cxl_mbox_cmd) {
 		.opcode = CXL_MBOX_OP_SET_EVT_INT_POLICY,
 		.payload_in = policy,
-		.size_in = sizeof(*policy),
+		.size_in = size_in,
 	};
 
 	rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
@@ -735,6 +746,30 @@ static int cxl_event_irqsetup(struct cxl_memdev_state *mds,
 	return 0;
 }
 
+static int cxl_irqsetup(struct cxl_memdev_state *mds,
+			struct cxl_event_interrupt_policy *policy,
+			bool native_cxl)
+{
+	struct cxl_dev_state *cxlds = &mds->cxlds;
+	int rc;
+
+	if (native_cxl) {
+		rc = cxl_event_irqsetup(mds, policy);
+		if (rc)
+			return rc;
+	}
+
+	if (cxl_dcd_supported(mds)) {
+		rc = cxl_event_req_irq(cxlds, policy->dcd_settings);
+		if (rc) {
+			dev_err(cxlds->dev, "Failed to get interrupt for DCD event log\n");
+			cxl_disable_dcd(mds);
+		}
+	}
+
+	return 0;
+}
+
 static bool cxl_event_int_is_fw(u8 setting)
 {
 	u8 mode = FIELD_GET(CXLDEV_EVENT_INT_MODE_MASK, setting);
@@ -760,18 +795,26 @@ static bool cxl_event_validate_mem_policy(struct cxl_memdev_state *mds,
 static int cxl_event_config(struct pci_host_bridge *host_bridge,
 			    struct cxl_memdev_state *mds, bool irq_avail)
 {
-	struct cxl_event_interrupt_policy policy;
+	struct cxl_event_interrupt_policy policy = { 0 };
+	bool native_cxl = host_bridge->native_cxl_error;
 	int rc;
 
 	/*
 	 * When BIOS maintains CXL error reporting control, it will process
 	 * event records.  Only one agent can do so.
+	 *
+	 * If BIOS has control of events and DCD is not supported skip event
+	 * configuration.
 	 */
-	if (!host_bridge->native_cxl_error)
+	if (!native_cxl && !cxl_dcd_supported(mds))
 		return 0;
 
 	if (!irq_avail) {
 		dev_info(mds->cxlds.dev, "No interrupt support, disable event processing.\n");
+		if (cxl_dcd_supported(mds)) {
+			dev_info(mds->cxlds.dev, "DCD requires interrupts, disable DCD\n");
+			cxl_disable_dcd(mds);
+		}
 		return 0;
 	}
 
@@ -779,10 +822,10 @@ static int cxl_event_config(struct pci_host_bridge *host_bridge,
 	if (rc)
 		return rc;
 
-	if (!cxl_event_validate_mem_policy(mds, &policy))
+	if (native_cxl && !cxl_event_validate_mem_policy(mds, &policy))
 		return -EBUSY;
 
-	rc = cxl_event_config_msgnums(mds, &policy);
+	rc = cxl_event_config_msgnums(mds, &policy, native_cxl);
 	if (rc)
 		return rc;
 
@@ -790,12 +833,16 @@ static int cxl_event_config(struct pci_host_bridge *host_bridge,
 	if (rc)
 		return rc;
 
-	rc = cxl_event_irqsetup(mds, &policy);
+	rc = cxl_irqsetup(mds, &policy, native_cxl);
 	if (rc)
 		return rc;
 
 	cxl_mem_get_event_records(mds, CXLDEV_EVENT_STATUS_ALL);
 
+	dev_dbg(mds->cxlds.dev, "Event config : %s DCD %s\n",
+		native_cxl ? "OS" : "BIOS",
+		cxl_dcd_supported(mds) ? "supported" : "not supported");
+
 	return 0;
 }
 

-- 
2.47.0


  parent reply	other threads:[~2024-10-29 20:36 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-29 20:34 [PATCH v5 00/27] DCD: Add support for Dynamic Capacity Devices (DCD) Ira Weiny
2024-10-29 20:34 ` [PATCH v5 01/27] range: Add range_overlaps() Ira Weiny
2024-10-29 20:34 ` [PATCH v5 02/27] ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values Ira Weiny
2024-10-29 20:34 ` [PATCH v5 03/27] dax: Document struct dev_dax_range Ira Weiny
2024-10-30 13:28   ` Jonathan Cameron
2024-10-29 20:34 ` [PATCH v5 04/27] cxl/pci: Delay event buffer allocation Ira Weiny
2024-10-29 20:34 ` [PATCH v5 05/27] cxl/hdm: Use guard() in cxl_dpa_set_mode() Ira Weiny
2024-10-30 13:29   ` Jonathan Cameron
2024-10-31  0:16   ` Davidlohr Bueso
2024-10-29 20:34 ` [PATCH v5 06/27] cxl/region: Refactor common create region code Ira Weiny
2024-10-29 20:34 ` [PATCH v5 07/27] cxl/mbox: Flag support for Dynamic Capacity Devices (DCD) ira.weiny
2024-10-29 20:34 ` [PATCH v5 08/27] cxl/mem: Read dynamic capacity configuration from the device ira.weiny
2024-10-30 14:05   ` Jonathan Cameron
2024-10-30 16:28     ` Ira Weiny
2024-10-31  0:24   ` Davidlohr Bueso
2024-10-31 14:48     ` Ira Weiny
2024-10-31  1:34   ` Davidlohr Bueso
2024-10-31 16:00     ` Fan Ni
2024-10-31 22:16       ` Ira Weiny
2024-11-04 17:09   ` Davidlohr Bueso
2024-11-05  1:53     ` Ira Weiny
2024-10-29 20:34 ` [PATCH v5 09/27] cxl/core: Separate region mode from decoder mode ira.weiny
2024-10-29 20:34 ` [PATCH v5 10/27] cxl/region: Add dynamic capacity decoder and region modes ira.weiny
2024-10-29 20:34 ` [PATCH v5 11/27] cxl/hdm: Add dynamic capacity size support to endpoint decoders ira.weiny
2024-10-29 20:34 ` [PATCH v5 12/27] cxl/cdat: Gather DSMAS data for DCD regions Ira Weiny
2024-10-30 18:32   ` Dave Jiang
2024-10-29 20:34 ` [PATCH v5 13/27] cxl/mem: Expose DCD partition capabilities in sysfs ira.weiny
2024-10-30 17:50   ` Fan Ni
2024-10-29 20:34 ` [PATCH v5 14/27] cxl/port: Add endpoint decoder DC mode support to sysfs ira.weiny
2024-10-29 20:34 ` [PATCH v5 15/27] cxl/region: Add sparse DAX region support ira.weiny
2024-10-29 20:34 ` [PATCH v5 16/27] cxl/events: Split event msgnum configuration from irq setup Ira Weiny
2024-10-29 20:34 ` [PATCH v5 17/27] cxl/pci: Factor out interrupt policy check Ira Weiny
2024-10-29 20:34 ` ira.weiny [this message]
2024-10-30 17:58   ` [PATCH v5 18/27] cxl/mem: Configure dynamic capacity interrupts Fan Ni
2024-10-29 20:34 ` [PATCH v5 19/27] cxl/core: Return endpoint decoder information from region search Ira Weiny
2024-10-29 20:34 ` [PATCH v5 20/27] cxl/extent: Process DCD events and realize region extents ira.weiny
2024-10-30 14:32   ` Jonathan Cameron
2024-10-30 16:36     ` Ira Weiny
2024-11-01 12:07       ` Jonathan Cameron
2024-10-29 20:34 ` [PATCH v5 21/27] cxl/region/extent: Expose region extent information in sysfs ira.weiny
2024-10-29 20:34 ` [PATCH v5 22/27] dax/bus: Factor out dev dax resize logic Ira Weiny
2024-10-29 20:34 ` [PATCH v5 23/27] dax/region: Create resources on sparse DAX regions ira.weiny
2024-10-30 14:44   ` Jonathan Cameron
2024-10-29 20:34 ` [PATCH v5 24/27] cxl/region: Read existing extents on region creation ira.weiny
2024-10-29 20:35 ` [PATCH v5 25/27] cxl/mem: Trace Dynamic capacity Event Record ira.weiny
2024-10-29 20:35 ` [PATCH v5 26/27] tools/testing/cxl: Make event logs dynamic Ira Weiny
2024-10-29 20:35 ` [PATCH v5 27/27] tools/testing/cxl: Add DC Regions to mock mem data Ira Weiny
2024-10-30 14:48 ` [PATCH v5 00/27] DCD: Add support for Dynamic Capacity Devices (DCD) Jonathan Cameron
2024-10-31 15:55   ` Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241029-dcd-type2-upstream-v5-18-8739cb67c374@intel.com \
    --to=ira.weiny@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=alison.schofield@intel.com \
    --cc=corbet@lwn.net \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=fan.ni@samsung.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ming4.li@intel.com \
    --cc=navneet.singh@intel.com \
    --cc=nvdimm@lists.linux.dev \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox