From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: <linux-cxl@vger.kernel.org>, <qemu-devel@nongnu.org>, <mst@redhat.com>
Cc: <linuxarm@huawei.com>, <fan.ni@samsung.com>,
Yuquan Wang <wangyuquan1236@phytium.com.cn>,
Arpit Kumar <arpit1.kumar@samsung.com>,
Sweta Kumari <s5.kumari@samsung.com>,
Vinayak Holikatti <vinayak.kh@samsung.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Ajay Joshi <ajay.opensrc@micron.com>
Subject: [PATCH qemu 3/8] hw/cxl/cxl-mailbox-utils: Add support for Media operations discovery commands cxl r3.2 (8.2.10.9.5.3)
Date: Wed, 5 Mar 2025 09:24:54 +0000 [thread overview]
Message-ID: <20250305092501.191929-4-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20250305092501.191929-1-Jonathan.Cameron@huawei.com>
From: Vinayak Holikatti <vinayak.kh@samsung.com>
CXL spec 3.2 section 8.2.10.9.5.3 describes media operations commands.
CXL devices supports media operations discovery command.
Signed-off-by: Vinayak Holikatti <vinayak.kh@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/cxl/cxl-mailbox-utils.c | 125 +++++++++++++++++++++++++++++++++++++
1 file changed, 125 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index bd25df033a..79b35d1405 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -89,6 +89,7 @@ enum {
SANITIZE = 0x44,
#define OVERWRITE 0x0
#define SECURE_ERASE 0x1
+ #define MEDIA_OPERATIONS 0x2
PERSISTENT_MEM = 0x45,
#define GET_SECURITY_STATE 0x0
MEDIA_AND_POISON = 0x43,
@@ -1705,6 +1706,126 @@ static CXLRetCode cmd_sanitize_overwrite(const struct cxl_cmd *cmd,
return CXL_MBOX_BG_STARTED;
}
+enum {
+ MEDIA_OP_CLASS_GENERAL = 0x0,
+ #define MEDIA_OP_GEN_SUBC_DISCOVERY 0x0
+ MEDIA_OP_CLASS_SANITIZE = 0x1,
+ #define MEDIA_OP_SAN_SUBC_SANITIZE 0x0
+ #define MEDIA_OP_SAN_SUBC_ZERO 0x1
+};
+
+struct media_op_supported_list_entry {
+ uint8_t media_op_class;
+ uint8_t media_op_subclass;
+};
+
+struct media_op_discovery_out_pl {
+ uint64_t dpa_range_granularity;
+ uint16_t total_supported_operations;
+ uint16_t num_of_supported_operations;
+ struct media_op_supported_list_entry entry[];
+} QEMU_PACKED;
+
+static const struct media_op_supported_list_entry media_op_matrix[] = {
+ { MEDIA_OP_CLASS_GENERAL, MEDIA_OP_GEN_SUBC_DISCOVERY },
+ { MEDIA_OP_CLASS_SANITIZE, MEDIA_OP_SAN_SUBC_SANITIZE },
+ { MEDIA_OP_CLASS_SANITIZE, MEDIA_OP_SAN_SUBC_ZERO },
+};
+
+static CXLRetCode media_operations_discovery(uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out)
+{
+ struct {
+ uint8_t media_operation_class;
+ uint8_t media_operation_subclass;
+ uint8_t rsvd[2];
+ uint32_t dpa_range_count;
+ struct {
+ uint16_t start_index;
+ uint16_t num_ops;
+ } discovery_osa;
+ } QEMU_PACKED *media_op_in_disc_pl = (void *)payload_in;
+ struct media_op_discovery_out_pl *media_out_pl =
+ (struct media_op_discovery_out_pl *)payload_out;
+ int num_ops, start_index, i;
+ int count = 0;
+
+ if (len_in < sizeof(*media_op_in_disc_pl)) {
+ return CXL_MBOX_INVALID_PAYLOAD_LENGTH;
+ }
+
+ num_ops = media_op_in_disc_pl->discovery_osa.num_ops;
+ start_index = media_op_in_disc_pl->discovery_osa.start_index;
+
+ /*
+ * As per spec CXL r3.2 8.2.10.9.5.3 dpa_range_count should be zero and
+ * start index should not exceed the total number of entries for discovery
+ * sub class command.
+ */
+ if (media_op_in_disc_pl->dpa_range_count ||
+ start_index > ARRAY_SIZE(media_op_matrix)) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ media_out_pl->dpa_range_granularity = CXL_CACHE_LINE_SIZE;
+ media_out_pl->total_supported_operations =
+ ARRAY_SIZE(media_op_matrix);
+ if (num_ops > 0) {
+ for (i = start_index; i < start_index + num_ops; i++) {
+ media_out_pl->entry[count].media_op_class =
+ media_op_matrix[i].media_op_class;
+ media_out_pl->entry[count].media_op_subclass =
+ media_op_matrix[i].media_op_subclass;
+ count++;
+ if (count == num_ops) {
+ break;
+ }
+ }
+ }
+
+ media_out_pl->num_of_supported_operations = count;
+ *len_out = sizeof(*media_out_pl) + count * sizeof(*media_out_pl->entry);
+ return CXL_MBOX_SUCCESS;
+}
+
+static CXLRetCode cmd_media_operations(const struct cxl_cmd *cmd,
+ uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out,
+ CXLCCI *cci)
+{
+ struct {
+ uint8_t media_operation_class;
+ uint8_t media_operation_subclass;
+ uint8_t rsvd[2];
+ uint32_t dpa_range_count;
+ } QEMU_PACKED *media_op_in_common_pl = (void *)payload_in;
+ uint8_t media_op_cl = 0;
+ uint8_t media_op_subclass = 0;
+
+ if (len_in < sizeof(*media_op_in_common_pl)) {
+ return CXL_MBOX_INVALID_PAYLOAD_LENGTH;
+ }
+
+ media_op_cl = media_op_in_common_pl->media_operation_class;
+ media_op_subclass = media_op_in_common_pl->media_operation_subclass;
+
+ switch (media_op_cl) {
+ case MEDIA_OP_CLASS_GENERAL:
+ if (media_op_subclass != MEDIA_OP_GEN_SUBC_DISCOVERY) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ return media_operations_discovery(payload_in, len_in, payload_out,
+ len_out);
+ default:
+ return CXL_MBOX_UNSUPPORTED;
+ }
+}
+
static CXLRetCode cmd_get_security_state(const struct cxl_cmd *cmd,
uint8_t *payload_in,
size_t len_in,
@@ -2850,6 +2971,10 @@ static const struct cxl_cmd cxl_cmd_set[256][256] = {
CXL_MBOX_SECURITY_STATE_CHANGE |
CXL_MBOX_BACKGROUND_OPERATION |
CXL_MBOX_BACKGROUND_OPERATION_ABORT)},
+ [SANITIZE][MEDIA_OPERATIONS] = { "MEDIA_OPERATIONS", cmd_media_operations,
+ ~0,
+ (CXL_MBOX_IMMEDIATE_DATA_CHANGE |
+ CXL_MBOX_BACKGROUND_OPERATION)},
[PERSISTENT_MEM][GET_SECURITY_STATE] = { "GET_SECURITY_STATE",
cmd_get_security_state, 0, 0 },
[MEDIA_AND_POISON][GET_POISON_LIST] = { "MEDIA_AND_POISON_GET_POISON_LIST",
--
2.43.0
next prev parent reply other threads:[~2025-03-05 9:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-05 9:24 [PATCH qemu 0/8] hw/cxl: new features for 10.0 (possibly) Jonathan Cameron
2025-03-05 9:24 ` [PATCH qemu 1/8] hw/cxl: Support aborting background commands Jonathan Cameron
2025-03-05 9:24 ` [PATCH qemu 2/8] hw/cxl: Support get/set mctp response payload size Jonathan Cameron
2025-03-05 9:24 ` Jonathan Cameron [this message]
2025-03-05 9:24 ` [PATCH qemu 4/8] hw/cxl: factor out calculation of sanitize duration from cmd_santize_overwrite Jonathan Cameron
2025-03-05 9:24 ` [PATCH qemu 5/8] hw/cxl/cxl-mailbox-utils: Media operations Sanitize and Write Zeros commands CXL r3.2(8.2.10.9.5.3) Jonathan Cameron
2025-03-05 9:24 ` [PATCH qemu 6/8] hw/cxl/cxl-mailbox-utils: CXL CCI Get/Set alert config commands Jonathan Cameron
2025-03-05 9:24 ` [PATCH qemu 7/8] hw/cxl/cxl-mailbox-utils: Added support for Get Log Capabilities (Opcode 0402h) Jonathan Cameron
2025-05-12 8:42 ` Michael S. Tsirkin
2025-05-12 10:14 ` Jonathan Cameron
2025-05-12 13:37 ` Michael S. Tsirkin
2025-05-12 16:40 ` Jonathan Cameron
2025-05-16 13:42 ` Arpit Kumar
2025-05-28 12:31 ` Jonathan Cameron
2025-05-28 12:38 ` Jonathan Cameron
2025-05-29 11:45 ` Arpit Kumar
2025-03-05 9:24 ` [PATCH qemu 8/8] docs/cxl: Add serial number for persistent-memdev Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250305092501.191929-4-Jonathan.Cameron@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=ajay.opensrc@micron.com \
--cc=arpit1.kumar@samsung.com \
--cc=dave@stgolabs.net \
--cc=fan.ni@samsung.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=s5.kumari@samsung.com \
--cc=vinayak.kh@samsung.com \
--cc=wangyuquan1236@phytium.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox