linux-cxl.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ben Cheatham <Benjamin.Cheatham@amd.com>
To: <linux-cxl@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	<linux-acpi@vger.kernel.org>
Cc: Ben Cheatham <Benjamin.Cheatham@amd.com>
Subject: [PATCH 02/16] cxl/regs: Add CXL Isolation capability mapping
Date: Wed, 30 Jul 2025 16:47:04 -0500	[thread overview]
Message-ID: <20250730214718.10679-3-Benjamin.Cheatham@amd.com> (raw)
In-Reply-To: <20250730214718.10679-1-Benjamin.Cheatham@amd.com>

Add necessary information to map the CXL Timeout & Isolation Capability
(CXL 3.2 8.2.4.24). This will be used in later commits by the CXL core
and PCIe portdrv driver to set up and manage the capability.

Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
---
 drivers/cxl/core/regs.c | 8 ++++++++
 drivers/cxl/cxl.h       | 7 +++++++
 2 files changed, 15 insertions(+)

diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index da8e668a3b70..bdc1eb59d69c 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -92,6 +92,13 @@ void cxl_probe_component_regs(struct device *dev, void __iomem *base,
 			length = CXL_RAS_CAPABILITY_LENGTH;
 			rmap = &map->ras;
 			break;
+		case CXL_CM_CAP_CAP_ID_ISOLATION:
+			dev_dbg(dev,
+				"found Timeout & Isolation capability (0x%x)\n",
+				offset);
+			length = CXL_ISOLATION_CAPABILITY_LENGTH;
+			rmap = &map->isolation;
+			break;
 		default:
 			dev_dbg(dev, "Unknown CM cap ID: %d (0x%x)\n", cap_id,
 				offset);
@@ -213,6 +220,7 @@ static int cxl_get_mapinfo(const struct cxl_register_map *map,
 	struct mapinfo mapinfo[] = {
 		{ &map->component_map.hdm_decoder, &regs->hdm_decoder },
 		{ &map->component_map.ras, &regs->ras },
+		{ &map->component_map.isolation, &regs->isolation },
 	};
 	int i;
 
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index a0fda305e25b..3013ba600ba3 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -41,6 +41,7 @@ extern const struct nvdimm_security_ops *cxl_security_ops;
 
 #define   CXL_CM_CAP_CAP_ID_RAS 0x2
 #define   CXL_CM_CAP_CAP_ID_HDM 0x5
+#define   CXL_CM_CAP_CAP_ID_ISOLATION 0x9
 #define   CXL_CM_CAP_CAP_HDM_VERSION 1
 
 /* HDM decoders CXL 2.0 8.2.5.12 CXL HDM Decoder Capability Structure */
@@ -133,6 +134,9 @@ static inline int ways_to_eiw(unsigned int ways, u8 *eiw)
 	return 0;
 }
 
+/* CXL 3.2 8.2.4.24 CXL Timeout and Isolation Capability Structure */
+#define CXL_ISOLATION_CAPABILITY_LENGTH 0x10
+
 /* RAS Registers CXL 2.0 8.2.5.9 CXL RAS Capability Structure */
 #define CXL_RAS_UNCORRECTABLE_STATUS_OFFSET 0x0
 #define   CXL_RAS_UNCORRECTABLE_STATUS_MASK (GENMASK(16, 14) | GENMASK(11, 0))
@@ -211,10 +215,12 @@ struct cxl_regs {
 	 * Common set of CXL Component register block base pointers
 	 * @hdm_decoder: CXL 2.0 8.2.5.12 CXL HDM Decoder Capability Structure
 	 * @ras: CXL 2.0 8.2.5.9 CXL RAS Capability Structure
+	 * @isolation: CXL 3.2 8.2.4.24 CXL Timeout & Isolation Capability Structure
 	 */
 	struct_group_tagged(cxl_component_regs, component,
 		void __iomem *hdm_decoder;
 		void __iomem *ras;
+		void __iomem *isolation;
 	);
 	/*
 	 * Common set of CXL Device register block base pointers
@@ -257,6 +263,7 @@ struct cxl_reg_map {
 struct cxl_component_reg_map {
 	struct cxl_reg_map hdm_decoder;
 	struct cxl_reg_map ras;
+	struct cxl_reg_map isolation;
 };
 
 struct cxl_device_reg_map {
-- 
2.34.1


  parent reply	other threads:[~2025-07-30 21:48 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-30 21:47 [PATCH 00/16] CXL.mem error isolation support Ben Cheatham
2025-07-30 21:47 ` [PATCH 01/16] cxl/regs: Add cxl_unmap_component_regs() Ben Cheatham
2025-07-30 21:47 ` Ben Cheatham [this message]
2025-07-30 21:47 ` [PATCH 03/16] PCI: PCIe portdrv: Add CXL Isolation service driver Ben Cheatham
2025-07-30 21:47 ` [PATCH 04/16] PCI: PCIe portdrv: Allocate CXL isolation MSI/-X vector Ben Cheatham
2025-08-04 21:39   ` Bjorn Helgaas
2025-08-06 17:58     ` Cheatham, Benjamin
2025-07-30 21:47 ` [PATCH 05/16] PCI: PCIe portdrv: Add interface for getting CXL isolation IRQ Ben Cheatham
2025-07-31  5:59   ` Lukas Wunner
2025-07-31 13:13     ` Cheatham, Benjamin
2025-07-30 21:47 ` [PATCH 06/16] cxl/core: Enable CXL.mem isolation Ben Cheatham
2025-07-30 21:47 ` [PATCH 07/16] cxl/core: Set up isolation interrupts Ben Cheatham
2025-07-30 21:47 ` [PATCH 08/16] cxl/core: Enable CXL " Ben Cheatham
2025-07-30 21:47 ` [PATCH 09/16] cxl/core: Prevent onlining CXL memory behind isolated ports Ben Cheatham
2025-07-30 21:47 ` [PATCH 10/16] cxl/core: Enable CXL.mem timeout Ben Cheatham
2025-07-30 21:47 ` [PATCH 11/16] cxl/pci: Add isolation handler Ben Cheatham
2025-07-30 21:47 ` [PATCH 12/16] PCI: PCIe portdrv: Add cxl_isolation sysfs attributes Ben Cheatham
2025-07-30 21:47 ` [PATCH 13/16] cxl/core, PCI: PCIe portdrv: Add CXL timeout range programming Ben Cheatham
2025-08-04 21:39   ` Bjorn Helgaas
2025-08-06 17:58     ` Cheatham, Benjamin
2025-07-30 21:47 ` [PATCH 14/16] ACPI: Add CXL isolation _OSC fields Ben Cheatham
2025-08-22 19:19   ` Rafael J. Wysocki
2025-07-30 21:47 ` [PATCH 15/16] cxl/core, cxl/acpi: Enable CXL isolation based on _OSC handshake Ben Cheatham
2025-07-30 21:47 ` [PATCH 16/16] cxl/core, cxl/acpi: Add CXL isolation notify handler Ben Cheatham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250730214718.10679-3-Benjamin.Cheatham@amd.com \
    --to=benjamin.cheatham@amd.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).