[RFC PATCH 02/18] cxl: Move struct cxl_dev_state definition

[Ben Cheatham <Benjamin.Cheatham@amd.com>]

Move struct cxl_dev_state (and associated structs) from cxlmem.h to
cxl.h. This is in preparation of adding a new CXL cache device type
that will also use cxl_dev_state.

Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
---
 drivers/cxl/cxl.h    | 114 +++++++++++++++++++++++++++++++++++++++++++
 drivers/cxl/cxlmem.h | 113 ------------------------------------------
 2 files changed, 114 insertions(+), 113 deletions(-)

diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 1de4fec5c8f4..751e5860423a 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -11,6 +11,7 @@
 #include <linux/log2.h>
 #include <linux/node.h>
 #include <linux/io.h>
+#include <cxl/mailbox.h>
 
 extern const struct nvdimm_security_ops *cxl_security_ops;
 
@@ -696,6 +697,119 @@ struct cxl_ep {
 	struct cxl_port *next;
 };
 
+
+/*
+ * enum cxl_devtype - delineate type-2 from a generic type-3 device
+ * @CXL_DEVTYPE_DEVMEM - Vendor specific CXL Type-2 device implementing HDM-D or
+ *			 HDM-DB, no requirement that this device implements a
+ *			 mailbox, or other memory-device-standard manageability
+ *			 flows.
+ * @CXL_DEVTYPE_CLASSMEM - Common class definition of a CXL Type-3 device with
+ *			   HDM-H and class-mandatory memory device registers
+ */
+enum cxl_devtype {
+	CXL_DEVTYPE_DEVMEM,
+	CXL_DEVTYPE_CLASSMEM,
+};
+
+/**
+ * struct cxl_dpa_perf - DPA performance property entry
+ * @dpa_range: range for DPA address
+ * @coord: QoS performance data (i.e. latency, bandwidth)
+ * @cdat_coord: raw QoS performance data from CDAT
+ * @qos_class: QoS Class cookies
+ */
+struct cxl_dpa_perf {
+	struct range dpa_range;
+	struct access_coordinate coord[ACCESS_COORDINATE_MAX];
+	struct access_coordinate cdat_coord[ACCESS_COORDINATE_MAX];
+	int qos_class;
+};
+
+/**
+ * struct cxl_dpa_partition - DPA partition descriptor
+ * @res: shortcut to the partition in the DPA resource tree (cxlds->dpa_res)
+ * @perf: performance attributes of the partition from CDAT
+ * @mode: operation mode for the DPA capacity, e.g. ram, pmem, dynamic...
+ */
+struct cxl_dpa_partition {
+	struct resource res;
+	struct cxl_dpa_perf perf;
+	enum cxl_partition_mode mode;
+};
+
+#define CXL_NR_PARTITIONS_MAX 2
+
+struct cxl_dpa_info {
+	u64 size;
+	struct cxl_dpa_part_info {
+		struct range range;
+		enum cxl_partition_mode mode;
+	} part[CXL_NR_PARTITIONS_MAX];
+	int nr_partitions;
+};
+
+struct cxl_dev_ops {
+	int (*probe)(struct device *cxldev);
+};
+
+/**
+ * struct cxl_dev_state - The driver device state
+ *
+ * cxl_dev_state represents the CXL driver/device state.  It provides an
+ * interface to mailbox commands as well as some cached data about the device.
+ * Currently only memory devices are represented.
+ *
+ * @dev: The device associated with this CXL state
+ * @cxlmd: The device representing the CXL.mem capabilities of @dev
+ * @reg_map: component and ras register mapping parameters
+ * @regs: Parsed register blocks
+ * @cxl_dvsec: Offset to the PCIe device DVSEC
+ * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH)
+ * @media_ready: Indicate whether the device media is usable
+ * @dpa_res: Overall DPA resource tree for the device
+ * @part: DPA partition array
+ * @nr_partitions: Number of DPA partitions
+ * @serial: PCIe Device Serial Number
+ * @type: Generic Memory Class device or Vendor Specific Memory device
+ * @cxl_mbox: CXL mailbox context
+ * @cxlfs: CXL features context
+ */
+struct cxl_dev_state {
+	struct device *dev;
+	struct cxl_memdev *cxlmd;
+	struct cxl_register_map reg_map;
+	struct cxl_regs regs;
+	int cxl_dvsec;
+	bool rcd;
+	bool media_ready;
+	struct resource dpa_res;
+	struct cxl_dpa_partition part[CXL_NR_PARTITIONS_MAX];
+	unsigned int nr_partitions;
+	u64 serial;
+	enum cxl_devtype type;
+	struct cxl_mailbox cxl_mbox;
+#ifdef CONFIG_CXL_FEATURES
+	struct cxl_features_state *cxlfs;
+#endif
+};
+
+static inline resource_size_t cxl_pmem_size(struct cxl_dev_state *cxlds)
+{
+	/*
+	 * Static PMEM may be at partition index 0 when there is no static RAM
+	 * capacity.
+	 */
+	for (int i = 0; i < cxlds->nr_partitions; i++)
+		if (cxlds->part[i].mode == CXL_PARTMODE_PMEM)
+			return resource_size(&cxlds->part[i].res);
+	return 0;
+}
+
+static inline struct cxl_dev_state *mbox_to_cxlds(struct cxl_mailbox *cxl_mbox)
+{
+	return dev_get_drvdata(cxl_mbox->host);
+}
 /**
  * struct cxl_region_ref - track a region's interest in a port
  * @port: point in topology to install this reference
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 5e0e551c9d6b..9c9d8a878785 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -34,10 +34,6 @@
 	(FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) !=                       \
 	 CXLMDEV_RESET_NEEDED_NOT)
 
-struct cxl_dev_ops {
-	int (*probe)(struct device *cxldev);
-};
-
 /**
  * struct cxl_memdev - CXL bus object representing a Type-3 Memory Device
  * @dev: driver core device object
@@ -113,17 +109,6 @@ int devm_cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled,
 			 resource_size_t base, resource_size_t len,
 			 resource_size_t skipped);
 
-#define CXL_NR_PARTITIONS_MAX 2
-
-struct cxl_dpa_info {
-	u64 size;
-	struct cxl_dpa_part_info {
-		struct range range;
-		enum cxl_partition_mode mode;
-	} part[CXL_NR_PARTITIONS_MAX];
-	int nr_partitions;
-};
-
 int cxl_dpa_setup(struct cxl_dev_state *cxlds, const struct cxl_dpa_info *info);
 
 static inline struct cxl_ep *cxl_ep_load(struct cxl_port *port,
@@ -373,104 +358,6 @@ struct cxl_security_state {
 	struct kernfs_node *sanitize_node;
 };
 
-/*
- * enum cxl_devtype - delineate type-2 from a generic type-3 device
- * @CXL_DEVTYPE_DEVMEM - Vendor specific CXL Type-2 device implementing HDM-D or
- *			 HDM-DB, no requirement that this device implements a
- *			 mailbox, or other memory-device-standard manageability
- *			 flows.
- * @CXL_DEVTYPE_CLASSMEM - Common class definition of a CXL Type-3 device with
- *			   HDM-H and class-mandatory memory device registers
- */
-enum cxl_devtype {
-	CXL_DEVTYPE_DEVMEM,
-	CXL_DEVTYPE_CLASSMEM,
-};
-
-/**
- * struct cxl_dpa_perf - DPA performance property entry
- * @dpa_range: range for DPA address
- * @coord: QoS performance data (i.e. latency, bandwidth)
- * @cdat_coord: raw QoS performance data from CDAT
- * @qos_class: QoS Class cookies
- */
-struct cxl_dpa_perf {
-	struct range dpa_range;
-	struct access_coordinate coord[ACCESS_COORDINATE_MAX];
-	struct access_coordinate cdat_coord[ACCESS_COORDINATE_MAX];
-	int qos_class;
-};
-
-/**
- * struct cxl_dpa_partition - DPA partition descriptor
- * @res: shortcut to the partition in the DPA resource tree (cxlds->dpa_res)
- * @perf: performance attributes of the partition from CDAT
- * @mode: operation mode for the DPA capacity, e.g. ram, pmem, dynamic...
- */
-struct cxl_dpa_partition {
-	struct resource res;
-	struct cxl_dpa_perf perf;
-	enum cxl_partition_mode mode;
-};
-
-/**
- * struct cxl_dev_state - The driver device state
- *
- * cxl_dev_state represents the CXL driver/device state.  It provides an
- * interface to mailbox commands as well as some cached data about the device.
- * Currently only memory devices are represented.
- *
- * @dev: The device associated with this CXL state
- * @cxlmd: The device representing the CXL.mem capabilities of @dev
- * @reg_map: component and ras register mapping parameters
- * @regs: Parsed register blocks
- * @cxl_dvsec: Offset to the PCIe device DVSEC
- * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH)
- * @media_ready: Indicate whether the device media is usable
- * @dpa_res: Overall DPA resource tree for the device
- * @part: DPA partition array
- * @nr_partitions: Number of DPA partitions
- * @serial: PCIe Device Serial Number
- * @type: Generic Memory Class device or Vendor Specific Memory device
- * @cxl_mbox: CXL mailbox context
- * @cxlfs: CXL features context
- */
-struct cxl_dev_state {
-	struct device *dev;
-	struct cxl_memdev *cxlmd;
-	struct cxl_register_map reg_map;
-	struct cxl_regs regs;
-	int cxl_dvsec;
-	bool rcd;
-	bool media_ready;
-	struct resource dpa_res;
-	struct cxl_dpa_partition part[CXL_NR_PARTITIONS_MAX];
-	unsigned int nr_partitions;
-	u64 serial;
-	enum cxl_devtype type;
-	struct cxl_mailbox cxl_mbox;
-#ifdef CONFIG_CXL_FEATURES
-	struct cxl_features_state *cxlfs;
-#endif
-};
-
-static inline resource_size_t cxl_pmem_size(struct cxl_dev_state *cxlds)
-{
-	/*
-	 * Static PMEM may be at partition index 0 when there is no static RAM
-	 * capacity.
-	 */
-	for (int i = 0; i < cxlds->nr_partitions; i++)
-		if (cxlds->part[i].mode == CXL_PARTMODE_PMEM)
-			return resource_size(&cxlds->part[i].res);
-	return 0;
-}
-
-static inline struct cxl_dev_state *mbox_to_cxlds(struct cxl_mailbox *cxl_mbox)
-{
-	return dev_get_drvdata(cxl_mbox->host);
-}
-
 /**
  * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data
  *
-- 
2.34.1