From: John Groves <John@Groves.net>
To: John Groves <John@Groves.net>, Miklos Szeredi <miklos@szeredi.hu>,
Dan Williams <dan.j.williams@intel.com>,
Bernd Schubert <bschubert@ddn.com>,
Alison Schofield <alison.schofield@intel.com>
Cc: John Groves <jgroves@micron.com>,
Jonathan Corbet <corbet@lwn.net>,
Vishal Verma <vishal.l.verma@intel.com>,
Dave Jiang <dave.jiang@intel.com>,
Matthew Wilcox <willy@infradead.org>, Jan Kara <jack@suse.cz>,
Alexander Viro <viro@zeniv.linux.org.uk>,
David Hildenbrand <david@kernel.org>,
Christian Brauner <brauner@kernel.org>,
"Darrick J . Wong" <djwong@kernel.org>,
Randy Dunlap <rdunlap@infradead.org>,
Jeff Layton <jlayton@kernel.org>,
Amir Goldstein <amir73il@gmail.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Stefan Hajnoczi <shajnocz@redhat.com>,
Joanne Koong <joannelkoong@gmail.com>,
Josef Bacik <josef@toxicpanda.com>,
Bagas Sanjaya <bagasdotme@gmail.com>,
Chen Linxuan <chenlinxuan@uniontech.com>,
James Morse <james.morse@arm.com>, Fuad Tabba <tabba@google.com>,
Sean Christopherson <seanjc@google.com>,
Shivank Garg <shivankg@amd.com>,
Ackerley Tng <ackerleytng@google.com>,
Gregory Price <gourry@gourry.net>,
Aravind Ramesh <arramesh@micron.com>,
Ajay Joshi <ajayjoshi@micron.com>,
venkataravis@micron.com, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, nvdimm@lists.linux.dev,
linux-cxl@vger.kernel.org, linux-fsdevel@vger.kernel.org,
John Groves <john@groves.net>
Subject: [PATCH V3 02/21] dax: add fsdev.c driver for fs-dax on character dax
Date: Wed, 7 Jan 2026 09:33:11 -0600 [thread overview]
Message-ID: <20260107153332.64727-3-john@groves.net> (raw)
In-Reply-To: <20260107153332.64727-1-john@groves.net>
The new fsdev driver provides pages/folios initialized compatibly with
fsdax - normal rather than devdax-style refcounting, and starting out
with order-0 folios.
When fsdev binds to a daxdev, it is usually (always?) switching from the
devdax mode (device.c), which pre-initializes compound folios according
to its alignment. Fsdev uses fsdev_clear_folio_state() to switch the
folios into a fsdax-compatible state.
A side effect of this is that raw mmap doesn't (can't?) work on an fsdev
dax instance. Accordingly, The fsdev driver does not provide raw mmap -
devices must be put in 'devdax' mode (drivers/dax/device.c) to get raw
mmap capability.
In this commit is just the framework, which remaps pages/folios compatibly
with fsdax.
Enabling dax changes:
* bus.h: add DAXDRV_FSDEV_TYPE driver type
* bus.c: allow DAXDRV_FSDEV_TYPE drivers to bind to daxdevs
* dax.h: prototype inode_dax(), which fsdev needs
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: John Groves <john@groves.net>
---
MAINTAINERS | 8 ++
drivers/dax/Kconfig | 17 +++
drivers/dax/Makefile | 2 +
drivers/dax/bus.c | 4 +
drivers/dax/bus.h | 1 +
drivers/dax/fsdev.c | 276 +++++++++++++++++++++++++++++++++++++++++++
include/linux/dax.h | 4 +
7 files changed, 312 insertions(+)
create mode 100644 drivers/dax/fsdev.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 765ad2daa218..90429cb06090 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7184,6 +7184,14 @@ L: linux-cxl@vger.kernel.org
S: Supported
F: drivers/dax/
+DEVICE DIRECT ACCESS (DAX) [fsdev_dax]
+M: John Groves <jgroves@micron.com>
+M: John Groves <John@Groves.net>
+L: nvdimm@lists.linux.dev
+L: linux-cxl@vger.kernel.org
+S: Supported
+F: drivers/dax/fsdev.c
+
DEVICE FREQUENCY (DEVFREQ)
M: MyungJoo Ham <myungjoo.ham@samsung.com>
M: Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/drivers/dax/Kconfig b/drivers/dax/Kconfig
index d656e4c0eb84..491325d914a8 100644
--- a/drivers/dax/Kconfig
+++ b/drivers/dax/Kconfig
@@ -78,4 +78,21 @@ config DEV_DAX_KMEM
Say N if unsure.
+config DEV_DAX_FS
+ tristate "FSDEV DAX: fs-dax compatible device driver"
+ depends on DEV_DAX
+ default DEV_DAX
+ help
+ Support a device-dax driver mode that is compatible with fs-dax
+ filesystems. Unlike the standard device-dax driver which
+ pre-initializes compound folios based on device alignment, this
+ driver leaves folios uninitialized (similar to pmem) allowing
+ fs-dax to manage folio lifecycles dynamically.
+
+ This driver uses MEMORY_DEVICE_FS_DAX type and does not set
+ vmemmap_shift, making it compatible with filesystems like famfs
+ that use the iomap-based fs-dax infrastructure.
+
+ Say M if you plan to use fs-dax filesystems on /dev/dax devices.
+ Say N if you only need raw character device access to DAX memory.
endif
diff --git a/drivers/dax/Makefile b/drivers/dax/Makefile
index 5ed5c39857c8..77aa3df3285c 100644
--- a/drivers/dax/Makefile
+++ b/drivers/dax/Makefile
@@ -4,11 +4,13 @@ obj-$(CONFIG_DEV_DAX) += device_dax.o
obj-$(CONFIG_DEV_DAX_KMEM) += kmem.o
obj-$(CONFIG_DEV_DAX_PMEM) += dax_pmem.o
obj-$(CONFIG_DEV_DAX_CXL) += dax_cxl.o
+obj-$(CONFIG_DEV_DAX_FS) += fsdev_dax.o
dax-y := super.o
dax-y += bus.o
device_dax-y := device.o
dax_pmem-y := pmem.o
dax_cxl-y := cxl.o
+fsdev_dax-y := fsdev.o
obj-y += hmem/
diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c
index a2f9a3cc30a5..0d7228acb913 100644
--- a/drivers/dax/bus.c
+++ b/drivers/dax/bus.c
@@ -84,6 +84,10 @@ static int dax_match_type(const struct dax_device_driver *dax_drv, struct device
!IS_ENABLED(CONFIG_DEV_DAX_KMEM))
return 1;
+ /* fsdev driver can also bind to device-type dax devices */
+ if (dax_drv->type == DAXDRV_FSDEV_TYPE && type == DAXDRV_DEVICE_TYPE)
+ return 1;
+
return 0;
}
diff --git a/drivers/dax/bus.h b/drivers/dax/bus.h
index cbbf64443098..880bdf7e72d7 100644
--- a/drivers/dax/bus.h
+++ b/drivers/dax/bus.h
@@ -31,6 +31,7 @@ struct dev_dax *devm_create_dev_dax(struct dev_dax_data *data);
enum dax_driver_type {
DAXDRV_KMEM_TYPE,
DAXDRV_DEVICE_TYPE,
+ DAXDRV_FSDEV_TYPE,
};
struct dax_device_driver {
diff --git a/drivers/dax/fsdev.c b/drivers/dax/fsdev.c
new file mode 100644
index 000000000000..2a3249d1529c
--- /dev/null
+++ b/drivers/dax/fsdev.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2026 Micron Technology, Inc. */
+#include <linux/memremap.h>
+#include <linux/pagemap.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/slab.h>
+#include <linux/dax.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include "dax-private.h"
+#include "bus.h"
+
+/*
+ * FS-DAX compatible devdax driver
+ *
+ * Unlike drivers/dax/device.c which pre-initializes compound folios based
+ * on device alignment (via vmemmap_shift), this driver leaves folios
+ * uninitialized similar to pmem. This allows fs-dax filesystems like famfs
+ * to work without needing special handling for pre-initialized folios.
+ *
+ * Key differences from device.c:
+ * - pgmap type is MEMORY_DEVICE_FS_DAX (not MEMORY_DEVICE_GENERIC)
+ * - vmemmap_shift is NOT set (folios remain order-0)
+ * - fs-dax can dynamically create compound folios as needed
+ * - No mmap support - all access is through fs-dax/iomap
+ */
+
+
+static void fsdev_cdev_del(void *cdev)
+{
+ cdev_del(cdev);
+}
+
+static void fsdev_kill(void *dev_dax)
+{
+ kill_dev_dax(dev_dax);
+}
+
+/*
+ * Page map operations for FS-DAX mode
+ * Similar to fsdax_pagemap_ops in drivers/nvdimm/pmem.c
+ *
+ * Note: folio_free callback is not needed for MEMORY_DEVICE_FS_DAX.
+ * The core mm code in free_zone_device_folio() handles the wake_up_var()
+ * directly for this memory type.
+ */
+static int fsdev_pagemap_memory_failure(struct dev_pagemap *pgmap,
+ unsigned long pfn, unsigned long nr_pages, int mf_flags)
+{
+ struct dev_dax *dev_dax = pgmap->owner;
+ u64 offset = PFN_PHYS(pfn) - dev_dax->ranges[0].range.start;
+ u64 len = nr_pages << PAGE_SHIFT;
+
+ return dax_holder_notify_failure(dev_dax->dax_dev, offset,
+ len, mf_flags);
+}
+
+static const struct dev_pagemap_ops fsdev_pagemap_ops = {
+ .memory_failure = fsdev_pagemap_memory_failure,
+};
+
+/*
+ * Clear any stale folio state from pages in the given range.
+ * This is necessary because device_dax pre-initializes compound folios
+ * based on vmemmap_shift, and that state may persist after driver unbind.
+ * Since fsdev_dax uses MEMORY_DEVICE_FS_DAX without vmemmap_shift, fs-dax
+ * expects to find clean order-0 folios that it can build into compound
+ * folios on demand.
+ *
+ * At probe time, no filesystem should be mounted yet, so all mappings
+ * are stale and must be cleared along with compound state.
+ */
+static void fsdev_clear_folio_state(struct dev_dax *dev_dax)
+{
+ int i;
+
+ for (i = 0; i < dev_dax->nr_range; i++) {
+ struct range *range = &dev_dax->ranges[i].range;
+ unsigned long pfn, end_pfn;
+
+ pfn = PHYS_PFN(range->start);
+ end_pfn = PHYS_PFN(range->end) + 1;
+
+ while (pfn < end_pfn) {
+ struct page *page = pfn_to_page(pfn);
+ struct folio *folio = (struct folio *)page;
+ struct dev_pagemap *pgmap = page_pgmap(page);
+ int order = folio_order(folio);
+
+ /*
+ * Clear any stale mapping pointer. At probe time,
+ * no filesystem is mounted, so any mapping is stale.
+ */
+ folio->mapping = NULL;
+ folio->share = 0;
+
+ if (order > 0) {
+ int j;
+
+ folio_reset_order(folio);
+ for (j = 0; j < (1UL << order); j++) {
+ struct page *p = page + j;
+
+ ClearPageHead(p);
+ clear_compound_head(p);
+ ((struct folio *)p)->mapping = NULL;
+ ((struct folio *)p)->share = 0;
+ ((struct folio *)p)->pgmap = pgmap;
+ }
+ pfn += (1UL << order);
+ } else {
+ folio->pgmap = pgmap;
+ pfn++;
+ }
+ }
+ }
+}
+
+static int fsdev_open(struct inode *inode, struct file *filp)
+{
+ struct dax_device *dax_dev = inode_dax(inode);
+ struct dev_dax *dev_dax = dax_get_private(dax_dev);
+
+ dev_dbg(&dev_dax->dev, "trace\n");
+ filp->private_data = dev_dax;
+
+ return 0;
+}
+
+static int fsdev_release(struct inode *inode, struct file *filp)
+{
+ struct dev_dax *dev_dax = filp->private_data;
+
+ dev_dbg(&dev_dax->dev, "trace\n");
+ return 0;
+}
+
+static const struct file_operations fsdev_fops = {
+ .llseek = noop_llseek,
+ .owner = THIS_MODULE,
+ .open = fsdev_open,
+ .release = fsdev_release,
+};
+
+static int fsdev_dax_probe(struct dev_dax *dev_dax)
+{
+ struct dax_device *dax_dev = dev_dax->dax_dev;
+ struct device *dev = &dev_dax->dev;
+ struct dev_pagemap *pgmap;
+ u64 data_offset = 0;
+ struct inode *inode;
+ struct cdev *cdev;
+ void *addr;
+ int rc, i;
+
+ if (static_dev_dax(dev_dax)) {
+ if (dev_dax->nr_range > 1) {
+ dev_warn(dev,
+ "static pgmap / multi-range device conflict\n");
+ return -EINVAL;
+ }
+
+ pgmap = dev_dax->pgmap;
+ } else {
+ if (dev_dax->pgmap) {
+ dev_warn(dev,
+ "dynamic-dax with pre-populated page map\n");
+ return -EINVAL;
+ }
+
+ pgmap = devm_kzalloc(dev,
+ struct_size(pgmap, ranges, dev_dax->nr_range - 1),
+ GFP_KERNEL);
+ if (!pgmap)
+ return -ENOMEM;
+
+ pgmap->nr_range = dev_dax->nr_range;
+ dev_dax->pgmap = pgmap;
+
+ for (i = 0; i < dev_dax->nr_range; i++) {
+ struct range *range = &dev_dax->ranges[i].range;
+
+ pgmap->ranges[i] = *range;
+ }
+ }
+
+ for (i = 0; i < dev_dax->nr_range; i++) {
+ struct range *range = &dev_dax->ranges[i].range;
+
+ if (!devm_request_mem_region(dev, range->start,
+ range_len(range), dev_name(dev))) {
+ dev_warn(dev, "mapping%d: %#llx-%#llx could not reserve range\n",
+ i, range->start, range->end);
+ return -EBUSY;
+ }
+ }
+
+ /*
+ * FS-DAX compatible mode: Use MEMORY_DEVICE_FS_DAX type and
+ * do NOT set vmemmap_shift. This leaves folios at order-0,
+ * allowing fs-dax to dynamically create compound folios as needed
+ * (similar to pmem behavior).
+ */
+ pgmap->type = MEMORY_DEVICE_FS_DAX;
+ pgmap->ops = &fsdev_pagemap_ops;
+ pgmap->owner = dev_dax;
+
+ /*
+ * CRITICAL DIFFERENCE from device.c:
+ * We do NOT set vmemmap_shift here, even if align > PAGE_SIZE.
+ * This ensures folios remain order-0 and are compatible with
+ * fs-dax's folio management.
+ */
+
+ addr = devm_memremap_pages(dev, pgmap);
+ if (IS_ERR(addr))
+ return PTR_ERR(addr);
+
+ /*
+ * Clear any stale compound folio state left over from a previous
+ * driver (e.g., device_dax with vmemmap_shift).
+ */
+ fsdev_clear_folio_state(dev_dax);
+
+ /* Detect whether the data is at a non-zero offset into the memory */
+ if (pgmap->range.start != dev_dax->ranges[0].range.start) {
+ u64 phys = dev_dax->ranges[0].range.start;
+ u64 pgmap_phys = dev_dax->pgmap[0].range.start;
+
+ if (!WARN_ON(pgmap_phys > phys))
+ data_offset = phys - pgmap_phys;
+
+ pr_debug("%s: offset detected phys=%llx pgmap_phys=%llx offset=%llx\n",
+ __func__, phys, pgmap_phys, data_offset);
+ }
+
+ inode = dax_inode(dax_dev);
+ cdev = inode->i_cdev;
+ cdev_init(cdev, &fsdev_fops);
+ cdev->owner = dev->driver->owner;
+ cdev_set_parent(cdev, &dev->kobj);
+ rc = cdev_add(cdev, dev->devt, 1);
+ if (rc)
+ return rc;
+
+ rc = devm_add_action_or_reset(dev, fsdev_cdev_del, cdev);
+ if (rc)
+ return rc;
+
+ run_dax(dax_dev);
+ return devm_add_action_or_reset(dev, fsdev_kill, dev_dax);
+}
+
+static struct dax_device_driver fsdev_dax_driver = {
+ .probe = fsdev_dax_probe,
+ .type = DAXDRV_FSDEV_TYPE,
+};
+
+static int __init dax_init(void)
+{
+ return dax_driver_register(&fsdev_dax_driver);
+}
+
+static void __exit dax_exit(void)
+{
+ dax_driver_unregister(&fsdev_dax_driver);
+}
+
+MODULE_AUTHOR("John Groves");
+MODULE_DESCRIPTION("FS-DAX Device: fs-dax compatible devdax driver");
+MODULE_LICENSE("GPL");
+module_init(dax_init);
+module_exit(dax_exit);
+MODULE_ALIAS_DAX_DEVICE(0);
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 9d624f4d9df6..74e098010016 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -51,6 +51,10 @@ struct dax_holder_operations {
#if IS_ENABLED(CONFIG_DAX)
struct dax_device *alloc_dax(void *private, const struct dax_operations *ops);
+
+#if IS_ENABLED(CONFIG_DEV_DAX_FS)
+struct dax_device *inode_dax(struct inode *inode);
+#endif
void *dax_holder(struct dax_device *dax_dev);
void put_dax(struct dax_device *dax_dev);
void kill_dax(struct dax_device *dax_dev);
--
2.49.0
next prev parent reply other threads:[~2026-01-07 15:33 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-07 15:32 [PATCH BUNDLE] famfs: Fabric-Attached Memory File System John Groves
2026-01-07 15:33 ` [PATCH V3 00/21] famfs: port into fuse John Groves
2026-01-07 15:33 ` [PATCH V3 01/21] dax: move dax_pgoff_to_phys from [drivers/dax/] device.c to bus.c John Groves
2026-01-08 10:43 ` Jonathan Cameron
2026-01-08 13:25 ` John Groves
2026-01-08 15:20 ` Jonathan Cameron
2026-01-07 15:33 ` John Groves [this message]
2026-01-08 11:31 ` [PATCH V3 02/21] dax: add fsdev.c driver for fs-dax on character dax Jonathan Cameron
2026-01-08 14:32 ` John Groves
2026-01-08 15:12 ` John Groves
2026-01-08 21:15 ` John Groves
2026-01-08 23:25 ` Gregory Price
2026-01-07 15:33 ` [PATCH V3 03/21] dax: Save the kva from memremap John Groves
2026-01-08 11:32 ` Jonathan Cameron
2026-01-08 15:15 ` John Groves
2026-01-07 15:33 ` [PATCH V3 04/21] dax: Add dax_operations for use by fs-dax on fsdev dax John Groves
2026-01-08 11:50 ` Jonathan Cameron
2026-01-08 15:59 ` John Groves
2026-01-08 16:10 ` Jonathan Cameron
2026-01-07 15:33 ` [PATCH V3 05/21] dax: Add dax_set_ops() for setting dax_operations at bind time John Groves
2026-01-08 12:06 ` Jonathan Cameron
2026-01-08 16:20 ` John Groves
2026-01-07 15:33 ` [PATCH V3 06/21] dax: Add fs_dax_get() func to prepare dax for fs-dax usage John Groves
2026-01-08 12:27 ` Jonathan Cameron
2026-01-08 16:45 ` John Groves
2026-01-07 15:33 ` [PATCH V3 07/21] dax: prevent driver unbind while filesystem holds device John Groves
2026-01-08 12:34 ` Jonathan Cameron
2026-01-08 18:08 ` John Groves
2026-01-12 18:55 ` John Groves
2026-01-07 15:33 ` [PATCH V3 08/21] dax: export dax_dev_get() John Groves
2026-01-07 15:33 ` [PATCH V3 09/21] famfs_fuse: magic.h: Add famfs magic numbers John Groves
2026-01-07 15:33 ` [PATCH V3 10/21] famfs_fuse: Kconfig John Groves
2026-01-08 12:36 ` Jonathan Cameron
2026-01-12 16:46 ` John Groves
2026-01-07 15:33 ` [PATCH V3 11/21] famfs_fuse: Update macro s/FUSE_IS_DAX/FUSE_IS_VIRTIO_DAX/ John Groves
2026-01-09 18:16 ` Joanne Koong
2026-01-09 22:15 ` [PATCH V3 11/21] famfs_fuse: Update macro s/FUSE_IS_DAX/FUSE_IS_VIRTIO_DAX John Groves
2026-01-07 15:33 ` [PATCH V3 12/21] famfs_fuse: Basic fuse kernel ABI enablement for famfs John Groves
2026-01-09 18:29 ` Joanne Koong
2026-01-09 22:58 ` John Groves
2026-01-07 15:33 ` [PATCH V3 13/21] famfs_fuse: Famfs mount opt: -o shadow=<shadowpath> John Groves
2026-01-09 19:22 ` Joanne Koong
2026-01-10 0:38 ` John Groves
2026-01-11 18:20 ` John Groves
2026-01-07 15:33 ` [PATCH V3 14/21] famfs_fuse: Plumb the GET_FMAP message/response John Groves
2026-01-08 12:49 ` Jonathan Cameron
2026-01-09 2:12 ` John Groves
2026-01-07 15:33 ` [PATCH V3 15/21] famfs_fuse: Create files with famfs fmaps John Groves
2026-01-07 21:30 ` John Groves
2026-01-08 13:14 ` Jonathan Cameron
2026-01-09 14:30 ` John Groves
2026-01-07 15:33 ` [PATCH V3 16/21] famfs_fuse: GET_DAXDEV message and daxdev_table John Groves
2026-01-08 14:45 ` Jonathan Cameron
2026-01-07 15:33 ` [PATCH V3 17/21] famfs_fuse: Plumb dax iomap and fuse read/write/mmap John Groves
2026-01-08 15:13 ` Jonathan Cameron
2026-01-09 17:44 ` John Groves
2026-01-07 15:33 ` [PATCH V3 18/21] famfs_fuse: Add holder_operations for dax notify_failure() John Groves
2026-01-08 15:17 ` Jonathan Cameron
2026-01-09 21:00 ` John Groves
2026-01-07 15:33 ` [PATCH V3 19/21] famfs_fuse: Add DAX address_space_operations with noop_dirty_folio John Groves
2026-01-07 15:33 ` [PATCH V3 20/21] famfs_fuse: Add famfs fmap metadata documentation John Groves
2026-01-07 15:33 ` [PATCH V3 21/21] famfs_fuse: Add documentation John Groves
2026-01-08 15:27 ` Jonathan Cameron
2026-01-11 18:53 ` John Groves
2026-01-07 15:34 ` [PATCH V3 0/4] libfuse: add basic famfs support to libfuse John Groves
2026-01-07 15:34 ` [PATCH V3 1/4] fuse_kernel.h: bring up to baseline 6.19 John Groves
2026-01-07 15:34 ` [PATCH V3 2/4] fuse_kernel.h: add famfs DAX fmap protocol definitions John Groves
2026-01-07 15:34 ` [PATCH V3 3/4] fuse: add API to set kernel mount options John Groves
2026-01-07 15:34 ` [PATCH V3 4/4] fuse: add famfs DAX fmap support John Groves
2026-01-08 15:31 ` Jonathan Cameron
2026-01-11 18:24 ` John Groves
2026-01-07 15:34 ` [PATCH 0/2] ndctl: Add daxctl support for the new "famfs" mode of devdax John Groves
2026-01-07 15:34 ` [PATCH 1/2] daxctl: Add support for famfs mode John Groves
2026-01-07 15:34 ` [PATCH 2/2] Add test/daxctl-famfs.sh to test famfs mode transitions: John Groves
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260107153332.64727-3-john@groves.net \
--to=john@groves.net \
--cc=Jonathan.Cameron@huawei.com \
--cc=ackerleytng@google.com \
--cc=ajayjoshi@micron.com \
--cc=alison.schofield@intel.com \
--cc=amir73il@gmail.com \
--cc=arramesh@micron.com \
--cc=bagasdotme@gmail.com \
--cc=brauner@kernel.org \
--cc=bschubert@ddn.com \
--cc=chenlinxuan@uniontech.com \
--cc=corbet@lwn.net \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=david@kernel.org \
--cc=djwong@kernel.org \
--cc=gourry@gourry.net \
--cc=jack@suse.cz \
--cc=james.morse@arm.com \
--cc=jgroves@micron.com \
--cc=jlayton@kernel.org \
--cc=joannelkoong@gmail.com \
--cc=josef@toxicpanda.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miklos@szeredi.hu \
--cc=nvdimm@lists.linux.dev \
--cc=rdunlap@infradead.org \
--cc=seanjc@google.com \
--cc=shajnocz@redhat.com \
--cc=shivankg@amd.com \
--cc=tabba@google.com \
--cc=venkataravis@micron.com \
--cc=viro@zeniv.linux.org.uk \
--cc=vishal.l.verma@intel.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox