From: Alison Schofield <alison.schofield@intel.com>
To: Ben Cheatham <Benjamin.Cheatham@amd.com>
Cc: Alison Schofield <alison.schofield@intel.com>,
nvdimm@lists.linux.dev, linux-cxl@vger.kernel.org
Subject: [ndctl PATCH v2] test/cxl-poison.sh: replace sysfs usage with cxl-cli cmds
Date: Fri, 13 Feb 2026 18:32:37 -0800 [thread overview]
Message-ID: <20260214023239.1352245-1-alison.schofield@intel.com> (raw)
cxl-cli commands were recently added for poison inject and clear
operations by memdev. Replace the writes to sysfs with the new
commands in the cxl-poison unit test.
Continue to use the sysfs writes for inject and clear poison
by region offset until that support arrives in cxl-cli.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
---
Hi Ben - This is updated to use the naming we are about to
merge. Please review and add any more testing you'd like to
see covered for the media poison cmds.
Change in v2: use final format of new cxl-cli cmds
inject-media-poison and clear-media-poison
test/cxl-poison.sh | 79 ++++++++++++++++++++++++----------------------
1 file changed, 42 insertions(+), 37 deletions(-)
diff --git a/test/cxl-poison.sh b/test/cxl-poison.sh
index 59e807ece932..05ab7bc1fc6a 100644
--- a/test/cxl-poison.sh
+++ b/test/cxl-poison.sh
@@ -41,32 +41,37 @@ find_auto_region()
echo "$region"
}
-# When cxl-cli support for inject and clear arrives, replace
-# the writes to /sys/kernel/debug with the new cxl commands.
-
-_do_poison_sysfs()
+_do_poison()
{
local action="$1" dev="$2" addr="$3"
local expect_fail=${4:-false}
- if "$expect_fail"; then
- if echo "$addr" > "/sys/kernel/debug/cxl/$dev/${action}_poison"; then
- echo "Expected ${action}_poison to fail for $addr"
- err "$LINENO"
- fi
- else
- echo "$addr" > "/sys/kernel/debug/cxl/$dev/${action}_poison"
+ # Regions use sysfs, memdevs use cxl-cli commands
+ if [[ "$dev" =~ ^region ]]; then
+ local sysfs_path="/sys/kernel/debug/cxl/$dev/${action}_poison"
+ "$expect_fail" && echo "$addr" > "$sysfs_path" && err "$LINENO"
+ "$expect_fail" || echo "$addr" > "$sysfs_path"
+ return
fi
+
+ case "$action" in
+ inject) local cmd=("$CXL" inject-media-poison "$dev" -a "$addr") ;;
+ clear) local cmd=("$CXL" clear-media-poison "$dev" -a "$addr") ;;
+ *) err "$LINENO" ;;
+ esac
+
+ "$expect_fail" && "${cmd[@]}" && err "$LINENO"
+ "$expect_fail" || "${cmd[@]}"
}
-inject_poison_sysfs()
+inject_poison()
{
- _do_poison_sysfs 'inject' "$@"
+ _do_poison 'inject' "$@"
}
-clear_poison_sysfs()
+clear_poison()
{
- _do_poison_sysfs 'clear' "$@"
+ _do_poison 'clear' "$@"
}
check_trace_entry()
@@ -119,27 +124,27 @@ validate_poison_found()
test_poison_by_memdev_by_dpa()
{
find_memdev
- inject_poison_sysfs "$memdev" "0x40000000"
- inject_poison_sysfs "$memdev" "0x40001000"
- inject_poison_sysfs "$memdev" "0x600"
- inject_poison_sysfs "$memdev" "0x0"
+ inject_poison "$memdev" "0x40000000"
+ inject_poison "$memdev" "0x40001000"
+ inject_poison "$memdev" "0x600"
+ inject_poison "$memdev" "0x0"
validate_poison_found "-m $memdev" 4
- clear_poison_sysfs "$memdev" "0x40000000"
- clear_poison_sysfs "$memdev" "0x40001000"
- clear_poison_sysfs "$memdev" "0x600"
- clear_poison_sysfs "$memdev" "0x0"
+ clear_poison "$memdev" "0x40000000"
+ clear_poison "$memdev" "0x40001000"
+ clear_poison "$memdev" "0x600"
+ clear_poison "$memdev" "0x0"
validate_poison_found "-m $memdev" 0
}
test_poison_by_region_by_dpa()
{
- inject_poison_sysfs "$mem0" "0"
- inject_poison_sysfs "$mem1" "0"
+ inject_poison "$mem0" "0"
+ inject_poison "$mem1" "0"
validate_poison_found "-r $region" 2
- clear_poison_sysfs "$mem0" "0"
- clear_poison_sysfs "$mem1" "0"
+ clear_poison "$mem0" "0"
+ clear_poison "$mem1" "0"
validate_poison_found "-r $region" 0
}
@@ -166,15 +171,15 @@ test_poison_by_region_offset()
# Inject at the offset and check result using the hpa
# ABI takes an offset, but recall the hpa to check trace event
- inject_poison_sysfs "$region" "$cache_size"
+ inject_poison "$region" "$cache_size"
check_trace_entry "$region" "$hpa1"
- inject_poison_sysfs "$region" "$((gran + cache_size))"
+ inject_poison "$region" "$((gran + cache_size))"
check_trace_entry "$region" "$hpa2"
validate_poison_found "-r $region" 2
- clear_poison_sysfs "$region" "$cache_size"
+ clear_poison "$region" "$cache_size"
check_trace_entry "$region" "$hpa1"
- clear_poison_sysfs "$region" "$((gran + cache_size))"
+ clear_poison "$region" "$((gran + cache_size))"
check_trace_entry "$region" "$hpa2"
validate_poison_found "-r $region" 0
}
@@ -194,21 +199,21 @@ test_poison_by_region_offset_negative()
if [[ $cache_size -gt 0 ]]; then
cache_offset=$((cache_size - 1))
echo "Testing offset within cache: $cache_offset (cache_size: $cache_size)"
- inject_poison_sysfs "$region" "$cache_offset" true
- clear_poison_sysfs "$region" "$cache_offset" true
+ inject_poison "$region" "$cache_offset" true
+ clear_poison "$region" "$cache_offset" true
else
echo "Skipping cache test - cache_size is 0"
fi
# Offset exceeds region size
exceed_offset=$((region_size))
- inject_poison_sysfs "$region" "$exceed_offset" true
- clear_poison_sysfs "$region" "$exceed_offset" true
+ inject_poison "$region" "$exceed_offset" true
+ clear_poison "$region" "$exceed_offset" true
# Offset exceeds region size by a lot
large_offset=$((region_size * 2))
- inject_poison_sysfs "$region" "$large_offset" true
- clear_poison_sysfs "$region" "$large_offset" true
+ inject_poison "$region" "$large_offset" true
+ clear_poison "$region" "$large_offset" true
}
run_poison_test()
--
2.37.3
reply other threads:[~2026-02-14 2:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260214023239.1352245-1-alison.schofield@intel.com \
--to=alison.schofield@intel.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=linux-cxl@vger.kernel.org \
--cc=nvdimm@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox