[PATCH v3 33/43] qapi: convert trivial intro sections for crypto.json

[John Snow <jsnow@redhat.com>]

Signed-off-by: John Snow <jsnow@redhat.com>
---
 qapi/crypto.json | 100 +++++++++++++++++------------------------------
 1 file changed, 36 insertions(+), 64 deletions(-)

diff --git a/qapi/crypto.json b/qapi/crypto.json
index 6e3a98ff68b..5e395bc10c7 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -26,8 +26,7 @@
 
 ##
 # @QCryptoSecretFormat:
-#
-# The data format that the secret is provided in
+#     The data format that the secret is provided in
 #
 # @raw: raw bytes.  When encoded in JSON only valid UTF-8 sequences
 #     can be used
@@ -41,8 +40,7 @@
 
 ##
 # @QCryptoHashAlgo:
-#
-# The supported algorithms for computing content digests
+#     The supported algorithms for computing content digests
 #
 # @md5: MD5.  Should not be used in any new code, legacy compat only
 #
@@ -68,8 +66,7 @@
 
 ##
 # @QCryptoCipherAlgo:
-#
-# The supported algorithms for content encryption ciphers
+#     The supported algorithms for content encryption ciphers
 #
 # @aes-128: AES with 128 bit / 16 byte keys
 #
@@ -110,8 +107,7 @@
 
 ##
 # @QCryptoCipherMode:
-#
-# The supported modes for content encryption ciphers
+#     The supported modes for content encryption ciphers
 #
 # @ecb: Electronic Code Book
 #
@@ -150,8 +146,7 @@
 
 ##
 # @QCryptoBlockFormat:
-#
-# The supported full disk encryption formats
+#     The supported full disk encryption formats
 #
 # @qcow: QCow/QCow2 built-in AES-CBC encryption.  Use only for
 #     liberating data from old images.
@@ -165,8 +160,8 @@
 
 ##
 # @QCryptoBlockOptionsBase:
-#
-# The common options that apply to all full disk encryption formats
+#     The common options that apply to all full disk encryption
+#     formats
 #
 # @format: the encryption format
 #
@@ -177,8 +172,7 @@
 
 ##
 # @QCryptoBlockOptionsQCow:
-#
-# The options that apply to QCow/QCow2 AES-CBC encryption format
+#     The options that apply to QCow/QCow2 AES-CBC encryption format
 #
 # @key-secret: the ID of a QCryptoSecret object providing the
 #     decryption key.  Mandatory except when probing image for
@@ -191,8 +185,7 @@
 
 ##
 # @QCryptoBlockOptionsLUKS:
-#
-# The options that apply to LUKS encryption format
+#     The options that apply to LUKS encryption format
 #
 # @key-secret: the ID of a QCryptoSecret object providing the
 #     decryption key.  Mandatory except when probing image for
@@ -205,8 +198,7 @@
 
 ##
 # @QCryptoBlockCreateOptionsLUKS:
-#
-# The options that apply to LUKS encryption format initialization
+#     The options that apply to LUKS encryption format initialization
 #
 # @cipher-alg: the cipher algorithm for data encryption.  Currently
 #     defaults to 'aes-256'.
@@ -239,9 +231,8 @@
 
 ##
 # @QCryptoBlockOpenOptions:
-#
-# The options that are available for all encryption formats when
-# opening an existing volume
+#     The options that are available for all encryption formats when
+#     opening an existing volume
 #
 # Since: 2.6
 ##
@@ -253,9 +244,8 @@
 
 ##
 # @QCryptoBlockCreateOptions:
-#
-# The options that are available for all encryption formats when
-# initializing a new volume
+#     The options that are available for all encryption formats when
+#     initializing a new volume
 #
 # Since: 2.6
 ##
@@ -267,9 +257,8 @@
 
 ##
 # @QCryptoBlockInfoBase:
-#
-# The common information that applies to all full disk encryption
-# formats
+#     The common information that applies to all full disk encryption
+#     formats
 #
 # @format: the encryption format
 #
@@ -280,8 +269,7 @@
 
 ##
 # @QCryptoBlockInfoLUKSSlot:
-#
-# Information about the LUKS block encryption key slot options
+#     Information about the LUKS block encryption key slot options
 #
 # @active: whether the key slot is currently in use
 #
@@ -301,8 +289,7 @@
 
 ##
 # @QCryptoBlockInfoLUKS:
-#
-# Information about the LUKS block encryption options
+#     Information about the LUKS block encryption options
 #
 # @cipher-alg: the cipher algorithm for data encryption
 #
@@ -340,8 +327,7 @@
 
 ##
 # @QCryptoBlockInfo:
-#
-# Information about the block encryption options
+#     Information about the block encryption options
 #
 # Since: 2.7
 ##
@@ -352,8 +338,7 @@
 
 ##
 # @QCryptoBlockLUKSKeyslotState:
-#
-# Defines state of keyslots that are affected by the update
+#     Defines state of keyslots that are affected by the update
 #
 # @active: The slots contain the given password and marked as active
 #
@@ -367,9 +352,8 @@
 
 ##
 # @QCryptoBlockAmendOptionsLUKS:
-#
-# This struct defines the update parameters that activate/de-activate
-# set of keyslots
+#     This struct defines the update parameters that
+#     activate/de-activate set of keyslots
 #
 # @state: the desired state of the keyslots
 #
@@ -409,9 +393,8 @@
 
 ##
 # @QCryptoBlockAmendOptions:
-#
-# The options that are available for all encryption formats when
-# amending encryption settings
+#     The options that are available for all encryption formats when
+#     amending encryption settings
 #
 # Since: 5.1
 ##
@@ -423,8 +406,7 @@
 
 ##
 # @SecretCommonProperties:
-#
-# Properties for objects of classes derived from secret-common.
+#     Properties for objects of classes derived from secret-common.
 #
 # @format: the data format that the secret is provided in
 #     (default: raw)
@@ -465,8 +447,7 @@
 
 ##
 # @SecretKeyringProperties:
-#
-# Properties for secret_keyring objects.
+#     Properties for secret_keyring objects.
 #
 # @serial: serial number that identifies a key to get from the kernel
 #
@@ -479,8 +460,7 @@
 
 ##
 # @TlsCredsProperties:
-#
-# Properties for objects of classes derived from tls-creds.
+#     Properties for objects of classes derived from tls-creds.
 #
 # @verify-peer: if true the peer credentials will be verified once the
 #     handshake is completed.  This is a no-op for anonymous
@@ -505,8 +485,7 @@
 
 ##
 # @TlsCredsAnonProperties:
-#
-# Properties for tls-creds-anon objects.
+#     Properties for tls-creds-anon objects.
 #
 # Since: 2.5
 ##
@@ -516,8 +495,7 @@
 
 ##
 # @TlsCredsPskProperties:
-#
-# Properties for tls-creds-psk objects.
+#     Properties for tls-creds-psk objects.
 #
 # @username: the username which will be sent to the server.  For
 #     clients only.  If absent, "qemu" is sent and the property will
@@ -531,8 +509,7 @@
 
 ##
 # @TlsCredsX509Properties:
-#
-# Properties for tls-creds-x509 objects.
+#     Properties for tls-creds-x509 objects.
 #
 # @sanity-check: if true, perform some sanity checks before using the
 #     credentials (default: true)
@@ -552,8 +529,7 @@
 
 ##
 # @QCryptoAkCipherAlgo:
-#
-# The supported algorithms for asymmetric encryption ciphers
+#     The supported algorithms for asymmetric encryption ciphers
 #
 # @rsa: RSA algorithm
 #
@@ -564,8 +540,7 @@
 
 ##
 # @QCryptoAkCipherKeyType:
-#
-# The type of asymmetric keys.
+#     The type of asymmetric keys.
 #
 # @public: public key
 #
@@ -578,8 +553,7 @@
 
 ##
 # @QCryptoRSAPaddingAlgo:
-#
-# The padding algorithm for RSA.
+#     The padding algorithm for RSA.
 #
 # @raw: no padding used
 #
@@ -592,8 +566,7 @@
 
 ##
 # @QCryptoAkCipherOptionsRSA:
-#
-# Specific parameters for RSA algorithm.
+#     Specific parameters for RSA algorithm.
 #
 # @hash-alg: `QCryptoHashAlgo`
 #
@@ -607,9 +580,8 @@
 
 ##
 # @QCryptoAkCipherOptions:
-#
-# The options that are available for all asymmetric key algorithms
-# when creating a new QCryptoAkCipher.
+#     The options that are available for all asymmetric key algorithms
+#     when creating a new QCryptoAkCipher.
 #
 # @alg: encryption cipher algorithm
 #
-- 
2.55.0