[PATCH v3 1/3] cxl/port: Clear cached dport pointers when a dport is removed

[Dave Jiang <dave.jiang@intel.com>]

Switch decoders cache dport pointers in cxlsd->target[], and nothing
clears them when a dport is freed. Readers then dereference freed memory.

KASAN caught it under a cxl_test load/unload loop with concurrent sysfs
reads (abbreviated).

Clear the matching slots from cxl_dport_remove(), walking the port's
decoders the way cxl_port_update_decoder_targets() does on the add side.
Scan all nr_targets slots, the target[] allocation size, and clear every
hit.

Fixes: 8330671c57c7 ("cxl: Add helper to delete dport")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Assisted-by: LLM
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Gregory Price (Meta) <gourry@gourry.net>
---
Found by KASAN while stress-testing a separate dport locking fix, not from a
failure report.

Reproducer: cxl_test, CONFIG_KASAN=y, 12 concurrent readers cat'ing
/sys/bus/cxl/devices/*/target_list while cxl_test is unloaded and reloaded.

With the fix reverted the UAF lands ~1s into the first unload, on the trace
above. With it applied, 36 cycles across two runs are clean: no KASAN
report, no WARNING, lockdep never self-disables. clear_decoder_target()
fired 2916 times during those runs, so the new path ran under the load.

KASAN only reports once per boot unless kasan_multi_shot is set
(report_enabled(), mm/kasan/report.c), so the reverted-fix run cannot show
a per-cycle count - one report is the ceiling, not the frequency.

target_list output is unaffected. Clearing a slot truncates the list at the
first NULL, so that was the regression to watch for: 88 target_list files,
no empty values before or after, and the multiset of values is unchanged
once the ida-assigned decoder names are stripped.

Enumeration is unchanged too: 15 memdev, 12 port, 15 endpoint, 192 decoder.
---
 drivers/cxl/core/port.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 625e4aa427db..6ff3353865e3 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -1089,11 +1089,40 @@ static void cond_cxl_root_unlock(struct cxl_port *port)
 		device_unlock(&port->dev);
 }
 
+static int clear_decoder_target(struct device *dev, void *data)
+{
+	struct cxl_dport *dport = data;
+	struct cxl_switch_decoder *cxlsd;
+
+	if (!is_switch_decoder(dev))
+		return 0;
+
+	cxlsd = to_cxl_switch_decoder(dev);
+	guard(rwsem_write)(&cxl_rwsem.region);
+
+	/*
+	 * A dport can occupy more than one position of an interleave, so
+	 * scan the whole target list rather than stopping at the first hit.
+	 */
+	for (int i = 0; i < cxlsd->nr_targets; i++) {
+		if (cxlsd->target[i] != dport)
+			continue;
+		cxlsd->target[i] = NULL;
+		dev_dbg(dev, "dport%d removed from target list, index %d\n",
+			dport->port_id, i);
+	}
+
+	return 0;
+}
+
 static void cxl_dport_remove(void *data)
 {
 	struct cxl_dport *dport = data;
 	struct cxl_port *port = dport->port;
 
+	/* counterpart of cxl_port_update_decoder_targets() */
+	device_for_each_child(&port->dev, dport, clear_decoder_target);
+
 	port->nr_dports--;
 	xa_erase(&port->dports, (unsigned long) dport->dport_dev);
 	put_device(dport->dport_dev);
-- 
2.54.0