From: alison.schofield@intel.com
To: Davidlohr Bueso <dave@stgolabs.net>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Dave Jiang <dave.jiang@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Dan Williams <dan.j.williams@intel.com>
Cc: linux-cxl@vger.kernel.org, Steven Rostedt <rostedt@goodmis.org>,
Shiyang Ruan <ruansy.fnst@fujitsu.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v5 3/4] cxl/region: Move cxl_trace_hpa() work to the region driver
Date: Mon, 29 Apr 2024 17:34:23 -0700 [thread overview]
Message-ID: <5d3bd29c90c8081d6f773cd5a71a744e884cea79.1714435815.git.alison.schofield@intel.com> (raw)
In-Reply-To: <cover.1714435815.git.alison.schofield@intel.com>
From: Alison Schofield <alison.schofield@intel.com>
This work belongs in the region driver as it is only useful with
CONFIG_CXL_REGION. Add a stub in core.h for when the region driver
is not built.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
---
drivers/cxl/core/core.h | 7 +++
drivers/cxl/core/region.c | 91 +++++++++++++++++++++++++++++++++++++++
drivers/cxl/core/trace.c | 91 ---------------------------------------
drivers/cxl/core/trace.h | 2 -
4 files changed, 98 insertions(+), 93 deletions(-)
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
index 87008505f8a9..625394486459 100644
--- a/drivers/cxl/core/core.h
+++ b/drivers/cxl/core/core.h
@@ -28,8 +28,15 @@ int cxl_region_init(void);
void cxl_region_exit(void);
int cxl_get_poison_by_endpoint(struct cxl_port *port);
struct cxl_region *cxl_dpa_to_region(const struct cxl_memdev *cxlmd, u64 dpa);
+u64 cxl_trace_hpa(struct cxl_region *cxlr, const struct cxl_memdev *cxlmd,
+ u64 dpa);
#else
+static inline u64
+cxl_trace_hpa(struct cxl_region *cxlr, const struct cxl_memdev *cxlmd, u64 dpa)
+{
+ return ULLONG_MAX;
+}
static inline
struct cxl_region *cxl_dpa_to_region(const struct cxl_memdev *cxlmd, u64 dpa)
{
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index 4b227659e3f8..45eb9c560fd6 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -2723,6 +2723,97 @@ struct cxl_region *cxl_dpa_to_region(const struct cxl_memdev *cxlmd, u64 dpa)
return ctx.cxlr;
}
+static bool cxl_is_hpa_in_range(u64 hpa, struct cxl_region *cxlr, int pos)
+{
+ struct cxl_region_params *p = &cxlr->params;
+ int gran = p->interleave_granularity;
+ int ways = p->interleave_ways;
+ u64 offset;
+
+ /* Is the hpa within this region at all */
+ if (hpa < p->res->start || hpa > p->res->end) {
+ dev_dbg(&cxlr->dev,
+ "Addr trans fail: hpa 0x%llx not in region\n", hpa);
+ return false;
+ }
+
+ /* Is the hpa in an expected chunk for its pos(-ition) */
+ offset = hpa - p->res->start;
+ offset = do_div(offset, gran * ways);
+ if ((offset >= pos * gran) && (offset < (pos + 1) * gran))
+ return true;
+
+ dev_dbg(&cxlr->dev,
+ "Addr trans fail: hpa 0x%llx not in expected chunk\n", hpa);
+
+ return false;
+}
+
+static u64 cxl_dpa_to_hpa(u64 dpa, struct cxl_region *cxlr,
+ struct cxl_endpoint_decoder *cxled)
+{
+ u64 dpa_offset, hpa_offset, bits_upper, mask_upper, hpa;
+ struct cxl_region_params *p = &cxlr->params;
+ int pos = cxled->pos;
+ u16 eig = 0;
+ u8 eiw = 0;
+
+ ways_to_eiw(p->interleave_ways, &eiw);
+ granularity_to_eig(p->interleave_granularity, &eig);
+
+ /*
+ * The device position in the region interleave set was removed
+ * from the offset at HPA->DPA translation. To reconstruct the
+ * HPA, place the 'pos' in the offset.
+ *
+ * The placement of 'pos' in the HPA is determined by interleave
+ * ways and granularity and is defined in the CXL Spec 3.0 Section
+ * 8.2.4.19.13 Implementation Note: Device Decode Logic
+ */
+
+ /* Remove the dpa base */
+ dpa_offset = dpa - cxl_dpa_resource_start(cxled);
+
+ mask_upper = GENMASK_ULL(51, eig + 8);
+
+ if (eiw < 8) {
+ hpa_offset = (dpa_offset & mask_upper) << eiw;
+ hpa_offset |= pos << (eig + 8);
+ } else {
+ bits_upper = (dpa_offset & mask_upper) >> (eig + 8);
+ bits_upper = bits_upper * 3;
+ hpa_offset = ((bits_upper << (eiw - 8)) + pos) << (eig + 8);
+ }
+
+ /* The lower bits remain unchanged */
+ hpa_offset |= dpa_offset & GENMASK_ULL(eig + 7, 0);
+
+ /* Apply the hpa_offset to the region base address */
+ hpa = hpa_offset + p->res->start;
+
+ if (!cxl_is_hpa_in_range(hpa, cxlr, cxled->pos))
+ return ULLONG_MAX;
+
+ return hpa;
+}
+
+u64 cxl_trace_hpa(struct cxl_region *cxlr, const struct cxl_memdev *cxlmd,
+ u64 dpa)
+{
+ struct cxl_region_params *p = &cxlr->params;
+ struct cxl_endpoint_decoder *cxled = NULL;
+
+ for (int i = 0; i < p->nr_targets; i++) {
+ cxled = p->targets[i];
+ if (cxlmd == cxled_to_memdev(cxled))
+ break;
+ }
+ if (!cxled || cxlmd != cxled_to_memdev(cxled))
+ return ULLONG_MAX;
+
+ return cxl_dpa_to_hpa(dpa, cxlr, cxled);
+}
+
static struct lock_class_key cxl_pmem_region_key;
static struct cxl_pmem_region *cxl_pmem_region_alloc(struct cxl_region *cxlr)
diff --git a/drivers/cxl/core/trace.c b/drivers/cxl/core/trace.c
index d0403dc3c8ab..7f2a9dd0d0e3 100644
--- a/drivers/cxl/core/trace.c
+++ b/drivers/cxl/core/trace.c
@@ -6,94 +6,3 @@
#define CREATE_TRACE_POINTS
#include "trace.h"
-
-static bool cxl_is_hpa_in_range(u64 hpa, struct cxl_region *cxlr, int pos)
-{
- struct cxl_region_params *p = &cxlr->params;
- int gran = p->interleave_granularity;
- int ways = p->interleave_ways;
- u64 offset;
-
- /* Is the hpa within this region at all */
- if (hpa < p->res->start || hpa > p->res->end) {
- dev_dbg(&cxlr->dev,
- "Addr trans fail: hpa 0x%llx not in region\n", hpa);
- return false;
- }
-
- /* Is the hpa in an expected chunk for its pos(-ition) */
- offset = hpa - p->res->start;
- offset = do_div(offset, gran * ways);
- if ((offset >= pos * gran) && (offset < (pos + 1) * gran))
- return true;
-
- dev_dbg(&cxlr->dev,
- "Addr trans fail: hpa 0x%llx not in expected chunk\n", hpa);
-
- return false;
-}
-
-static u64 cxl_dpa_to_hpa(u64 dpa, struct cxl_region *cxlr,
- struct cxl_endpoint_decoder *cxled)
-{
- u64 dpa_offset, hpa_offset, bits_upper, mask_upper, hpa;
- struct cxl_region_params *p = &cxlr->params;
- int pos = cxled->pos;
- u16 eig = 0;
- u8 eiw = 0;
-
- ways_to_eiw(p->interleave_ways, &eiw);
- granularity_to_eig(p->interleave_granularity, &eig);
-
- /*
- * The device position in the region interleave set was removed
- * from the offset at HPA->DPA translation. To reconstruct the
- * HPA, place the 'pos' in the offset.
- *
- * The placement of 'pos' in the HPA is determined by interleave
- * ways and granularity and is defined in the CXL Spec 3.0 Section
- * 8.2.4.19.13 Implementation Note: Device Decode Logic
- */
-
- /* Remove the dpa base */
- dpa_offset = dpa - cxl_dpa_resource_start(cxled);
-
- mask_upper = GENMASK_ULL(51, eig + 8);
-
- if (eiw < 8) {
- hpa_offset = (dpa_offset & mask_upper) << eiw;
- hpa_offset |= pos << (eig + 8);
- } else {
- bits_upper = (dpa_offset & mask_upper) >> (eig + 8);
- bits_upper = bits_upper * 3;
- hpa_offset = ((bits_upper << (eiw - 8)) + pos) << (eig + 8);
- }
-
- /* The lower bits remain unchanged */
- hpa_offset |= dpa_offset & GENMASK_ULL(eig + 7, 0);
-
- /* Apply the hpa_offset to the region base address */
- hpa = hpa_offset + p->res->start;
-
- if (!cxl_is_hpa_in_range(hpa, cxlr, cxled->pos))
- return ULLONG_MAX;
-
- return hpa;
-}
-
-u64 cxl_trace_hpa(struct cxl_region *cxlr, struct cxl_memdev *cxlmd,
- u64 dpa)
-{
- struct cxl_region_params *p = &cxlr->params;
- struct cxl_endpoint_decoder *cxled = NULL;
-
- for (int i = 0; i < p->nr_targets; i++) {
- cxled = p->targets[i];
- if (cxlmd == cxled_to_memdev(cxled))
- break;
- }
- if (!cxled || cxlmd != cxled_to_memdev(cxled))
- return ULLONG_MAX;
-
- return cxl_dpa_to_hpa(dpa, cxlr, cxled);
-}
diff --git a/drivers/cxl/core/trace.h b/drivers/cxl/core/trace.h
index 7c5cd069f10c..e303e618aa05 100644
--- a/drivers/cxl/core/trace.h
+++ b/drivers/cxl/core/trace.h
@@ -642,8 +642,6 @@ TRACE_EVENT(cxl_memory_module,
#define cxl_poison_overflow(flags, time) \
(flags & CXL_POISON_FLAG_OVERFLOW ? le64_to_cpu(time) : 0)
-u64 cxl_trace_hpa(struct cxl_region *cxlr, struct cxl_memdev *memdev, u64 dpa);
-
TRACE_EVENT(cxl_poison,
TP_PROTO(struct cxl_memdev *cxlmd, struct cxl_region *cxlr,
--
2.37.3
next prev parent reply other threads:[~2024-04-30 0:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-30 0:34 [PATCH v5 0/4] Add DPA->HPA translation to dram & general_media events alison.schofield
2024-04-30 0:34 ` [PATCH v5 1/4] cxl/trace: Correct DPA field masks for general_media & dram events alison.schofield
2024-04-30 2:12 ` Ira Weiny
2024-04-30 16:27 ` Jonathan Cameron
2024-04-30 0:34 ` [PATCH v5 2/4] cxl/region: Move cxl_dpa_to_region() work to the region driver alison.schofield
2024-04-30 0:34 ` alison.schofield [this message]
2024-04-30 16:29 ` [PATCH v5 3/4] cxl/region: Move cxl_trace_hpa() " Jonathan Cameron
2024-04-30 0:34 ` [PATCH v5 4/4] cxl/core: Add region info to cxl_general_media and cxl_dram events alison.schofield
2024-04-30 2:19 ` Ira Weiny
2024-04-30 4:13 ` Alison Schofield
2024-04-30 16:26 ` Ira Weiny
2024-04-30 16:40 ` Ira Weiny
2024-04-30 16:33 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5d3bd29c90c8081d6f773cd5a71a744e884cea79.1714435815.git.alison.schofield@intel.com \
--to=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=ruansy.fnst@fujitsu.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox