Re: [PATCH RFC v2 02/18] cxl/mbox: Flag support for Dynamic Capacity Devices (DCD)

[Ira Weiny <ira.weiny@intel.com>]

Jonathan Cameron wrote:
> On Mon, 28 Aug 2023 22:20:53 -0700
> Ira Weiny <ira.weiny@intel.com> wrote:
> 
> > Per the CXL 3.0 specification software must check the Command Effects
> > Log (CEL) to know if a device supports DC.  If the device does support
> > DC the specifics of the DC Regions (0-7) are read through the mailbox.
> > 
> > Flag DC Device (DCD) commands in a device if they are supported.
> > Subsequent patches will key off these bits to configure a DCD.
> > 
> > Co-developed-by: Navneet Singh <navneet.singh@intel.com>
> > Signed-off-by: Navneet Singh <navneet.singh@intel.com>
> > Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> > 
> 
> Trivial unrelated change seems to have sneaked in. Other than that
> this looks good to me.
> 
> So with that tidied up.
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> 
> Thanks,
> 
> Jonathan
> 
> > +
> >  static bool cxl_is_security_command(u16 opcode)
> >  {
> >  	int i;
> > @@ -677,9 +705,10 @@ static void cxl_walk_cel(struct cxl_memdev_state *mds, size_t size, u8 *cel)
> >  		u16 opcode = le16_to_cpu(cel_entry[i].opcode);
> >  		struct cxl_mem_command *cmd = cxl_mem_find_command(opcode);
> >  
> > -		if (!cmd && !cxl_is_poison_command(opcode)) {
> > -			dev_dbg(dev,
> > -				"Opcode 0x%04x unsupported by driver\n", opcode);
> > +		if (!cmd && !cxl_is_poison_command(opcode) &&
> > +		    !cxl_is_dcd_command(opcode)) {
> > +			dev_dbg(dev, "Opcode 0x%04x unsupported by driver\n",
> > +				opcode);
> 
> Clang format has been playing?
> Better to leave this alone and save reviewers wondering what the change
> in the dev_dbg() was.

Fixed.  Thanks for the review,
Ira

> 
> >  			continue;
> >  		}
>