Linux CXL
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: "Bowman, Terry" <terry.bowman@amd.com>,
	dave@stgolabs.net, jonathan.cameron@huawei.com,
	alison.schofield@intel.com, dan.j.williams@intel.com,
	bhelgaas@google.com, shiju.jose@huawei.com, ming.li@zohomail.com,
	Smita.KoralahalliChannabasappa@amd.com, rrichter@amd.com,
	dan.carpenter@linaro.org, PradeepVineshReddy.Kodamati@amd.com,
	lukas@wunner.de, Benjamin.Cheatham@amd.com,
	sathyanarayanan.kuppuswamy@linux.intel.com,
	linux-cxl@vger.kernel.org, vishal.l.verma@intel.com,
	alucerop@amd.com, ira.weiny@intel.com
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH v15 7/9] cxl: Update Endpoint AER uncorrectable handler
Date: Tue, 3 Feb 2026 13:21:52 -0700	[thread overview]
Message-ID: <87136790-756f-44c8-b8c5-5d1de50ac5e4@intel.com> (raw)
In-Reply-To: <ea1af897-b05f-4f83-98ad-dc81e473d3fa@intel.com>



On 2/3/26 11:49 AM, Dave Jiang wrote:
> 
> 
> On 2/3/26 11:35 AM, Bowman, Terry wrote:
>> On 2/3/2026 11:31 AM, Dave Jiang wrote:
>>>
>>>
>>> On 2/2/26 7:52 PM, Terry Bowman wrote:
>>>> CXL drivers now implement protocol RAS support. PCI protocol errors,
>>>> however, continue to be reported via the AER capability and must still be
>>>> handled by a PCI error recovery callback.
>>>>
>>>> Replace the existing cxl_error_detected() callback in cxl/pci.c with a
>>>> new cxl_pci_error_detected() implementation that handles only uncorrectable
>>>> PCI protocol errors reported through AER.
>>>
>>> Do we need to explain why only uncorrectable is handled?
>>>
>>
>> Would it be Ok if I removed "only" with s/only// ? 
>>
>> After mentioning an important detail I shoud elaborate. But, how about if 
>> remove it and not refer to the CE at all here? CE shouldnt be mentioned unless 
>> good reason in a primarily UCE patch.
> 
> Is CE handling added later? Maybe just say that.

So it's explained in the commit log of patch 8/9. Maybe just add a line here and say that CE is not needed.

> 
> DJ
> 
>>
>> - Terry
>>
>>>>
>>>> Introduce helper named cxl_handler_aer() amd implement to handle and
>>>> log the CXL device's AER error.
>>>>
>>>> This cleanly separates CXL protocol error handling from PCI AER handling
>>>> and ensures that each subsystem processes only the errors it is
>>>> responsible.
>>>>
>>>> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
>>>>
>>>> ---
>>>>
>>>> Changes in v14->v15:
>>>> - Title update (Terry)
>>>> - Change cxl_pci_error-detected() to handle & log AER (Terry)
>>>> - Update commit message (Terry)
>>>> - Moved cxl_handle_ras()/cxl_handle_cor_ras() to earlier patch (Terry)
>>>>
>>>> Changes in v13->v14:
>>>> - Update commit headline (Bjorn)
>>>> - Rename pci_error_detected()/pci_cor_error_detected() ->
>>>>   cxl_pci_error_detected/cxl_pci_cor_error_detected() (Jonathan)
>>>> - Remove now-invalid comment in cxl_error_detected() (Jonathan)
>>>> - Split into separate patches for UCE and CE (Terry)
>>>>
>>>> Changes in v12->v13:
>>>> - Update commit messaqge (Terry)
>>>> - Updated all the implementation and commit message. (Terry)
>>>> - Refactored cxl_cor_error_detected()/cxl_error_detected() to remove
>>>>   pdev (Dave Jiang)
>>>>
>>>> Changes in v11->v12:
>>>> - None
>>>>
>>>> Changes in v10->v11:
>>>> - cxl_error_detected() - Change handlers' scoped_guard() to guard() (Jonathan)
>>>> - cxl_error_detected() - Remove extra line (Shiju)
>>>> - Changes moved to core/ras.c (Terry)
>>>> - cxl_error_detected(), remove 'ue' and return with function call. (Jonathan)
>>>> - Remove extra space in documentation for PCI_ERS_RESULT_PANIC definition
>>>> - Move #include "pci.h from cxl.h to core.h (Terry)
>>>> - Remove unnecessary includes of cxl.h and core.h in mem.c (Terry)
>>>> ---
>>>>  drivers/cxl/core/ras.c | 68 +++++++++++++++---------------------------
>>>>  drivers/cxl/cxlpci.h   |  9 +++---
>>>>  drivers/cxl/pci.c      |  6 ++--
>>>>  3 files changed, 31 insertions(+), 52 deletions(-)
>>>>
>>>> diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
>>>> index 970ff3df442c..061e6aaec176 100644
>>>> --- a/drivers/cxl/core/ras.c
>>>> +++ b/drivers/cxl/core/ras.c
>>>> @@ -441,55 +441,35 @@ void cxl_cor_error_detected(struct pci_dev *pdev)
>>>>  }
>>>>  EXPORT_SYMBOL_NS_GPL(cxl_cor_error_detected, "CXL");
>>>>  
>>>> -pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
>>>> -				    pci_channel_state_t state)
>>>> +static bool cxl_handle_aer(struct pci_dev *pdev)
>>>
>>> For a function that returns a bool, the function name doesn't sound quite right. Maybe cxl_uncor_aer_present()?
>>>
>>> DJ
>>>
>>
>> I was trying to follow the pattern of detected() function calls the 
>> handle() function as done for cxl_handle_ras() and cxl_handle_cor_ras().
>>
>> I will change to cxl_uncor_aer_present().
>>
>> -Terry
>>
>>>>  {
>>>> -	struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
>>>> -	struct cxl_memdev *cxlmd = cxlds->cxlmd;
>>>> -	struct device *dev = &cxlmd->dev;
>>>> -	bool ue;
>>>> -
>>>> -	scoped_guard(device, dev) {
>>>> -		if (!dev->driver) {
>>>> -			dev_warn(&pdev->dev,
>>>> -				 "%s: memdev disabled, abort error handling\n",
>>>> -				 dev_name(dev));
>>>> -			return PCI_ERS_RESULT_DISCONNECT;
>>>> -		}
>>>> +	struct aer_capability_regs aer;
>>>> +	u32 aer_cap = pdev->aer_cap;
>>>>  
>>>> -		if (cxlds->rcd)
>>>> -			cxl_handle_rdport_errors(cxlds);
>>>> -		/*
>>>> -		 * A frozen channel indicates an impending reset which is fatal to
>>>> -		 * CXL.mem operation, and will likely crash the system. On the off
>>>> -		 * chance the situation is recoverable dump the status of the RAS
>>>> -		 * capability registers and bounce the active state of the memdev.
>>>> -		 */
>>>> -		ue = cxl_handle_ras(&cxlds->cxlmd->dev, cxlds->serial,
>>>> -				    cxlmd->endpoint->regs.ras);
>>>> +	if (!aer_cap) {
>>>> +		pr_warn_ratelimited("%s: AER capability isn't present\n",
>>>> +				    pci_name(pdev));
>>>> +		return false;
>>>>  	}
>>>>  
>>>> -	switch (state) {
>>>> -	case pci_channel_io_normal:
>>>> -		if (ue) {
>>>> -			device_release_driver(dev);
>>>> -			return PCI_ERS_RESULT_NEED_RESET;
>>>> -		}
>>>> -		return PCI_ERS_RESULT_CAN_RECOVER;
>>>> -	case pci_channel_io_frozen:
>>>> -		dev_warn(&pdev->dev,
>>>> -			 "%s: frozen state error detected, disable CXL.mem\n",
>>>> -			 dev_name(dev));
>>>> -		device_release_driver(dev);
>>>> -		return PCI_ERS_RESULT_NEED_RESET;
>>>> -	case pci_channel_io_perm_failure:
>>>> -		dev_warn(&pdev->dev,
>>>> -			 "failure state error detected, request disconnect\n");
>>>> -		return PCI_ERS_RESULT_DISCONNECT;
>>>> -	}
>>>> -	return PCI_ERS_RESULT_NEED_RESET;
>>>> +	pci_read_config_dword(pdev, aer_cap + PCI_ERR_UNCOR_STATUS, &aer.uncor_status);
>>>> +	pci_read_config_dword(pdev, aer_cap + PCI_ERR_UNCOR_MASK, &aer.uncor_mask);
>>>> +
>>>> +	/* The AER driver logged the error */
>>>> +	pci_aer_clear_nonfatal_status(pdev);
>>>> +	pci_aer_clear_fatal_status(pdev);
>>>> +
>>>> +	return (aer.uncor_status & aer.uncor_mask);
>>>> +}
>>>> +
>>>> +pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
>>>> +					pci_channel_state_t error)
>>>> +{
>>>> +	u32 rc = cxl_handle_aer(pdev);
>>>> +
>>>> +	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_CAN_RECOVER;
>>>>  }
>>>> -EXPORT_SYMBOL_NS_GPL(cxl_error_detected, "CXL");
>>>> +EXPORT_SYMBOL_NS_GPL(cxl_pci_error_detected, "CXL");
>>>>  
>>>>  static void cxl_handle_proto_error(struct cxl_proto_err_work_data *err_info)
>>>>  {
>>>> diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
>>>> index 970add0256e9..5534422b496c 100644
>>>> --- a/drivers/cxl/cxlpci.h
>>>> +++ b/drivers/cxl/cxlpci.h
>>>> @@ -79,15 +79,14 @@ void read_cdat_data(struct cxl_port *port);
>>>>  
>>>>  #ifdef CONFIG_CXL_RAS
>>>>  void cxl_cor_error_detected(struct pci_dev *pdev);
>>>> -pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
>>>> -				    pci_channel_state_t state);
>>>>  void devm_cxl_dport_rch_ras_setup(struct cxl_dport *dport);
>>>> +pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
>>>> +					pci_channel_state_t error);
>>>>  void devm_cxl_port_ras_setup(struct cxl_port *port);
>>>>  #else
>>>>  static inline void cxl_cor_error_detected(struct pci_dev *pdev) { }
>>>> -
>>>> -static inline pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
>>>> -						  pci_channel_state_t state)
>>>> +static inline pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
>>>> +						      pci_channel_state_t state)
>>>>  {
>>>>  	return PCI_ERS_RESULT_NONE;
>>>>  }
>>>> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
>>>> index acb0eb2a13c3..ff741adc7c7f 100644
>>>> --- a/drivers/cxl/pci.c
>>>> +++ b/drivers/cxl/pci.c
>>>> @@ -1051,8 +1051,8 @@ static void cxl_reset_done(struct pci_dev *pdev)
>>>>  	}
>>>>  }
>>>>  
>>>> -static const struct pci_error_handlers cxl_error_handlers = {
>>>> -	.error_detected	= cxl_error_detected,
>>>> +static const struct pci_error_handlers pci_error_handlers = {
>>>> +	.error_detected	= cxl_pci_error_detected,
>>>>  	.slot_reset	= cxl_slot_reset,
>>>>  	.resume		= cxl_error_resume,
>>>>  	.cor_error_detected	= cxl_cor_error_detected,
>>>> @@ -1063,7 +1063,7 @@ static struct pci_driver cxl_pci_driver = {
>>>>  	.name			= KBUILD_MODNAME,
>>>>  	.id_table		= cxl_mem_pci_tbl,
>>>>  	.probe			= cxl_pci_probe,
>>>> -	.err_handler		= &cxl_error_handlers,
>>>> +	.err_handler		= &pci_error_handlers,
>>>>  	.dev_groups		= cxl_rcd_groups,
>>>>  	.driver	= {
>>>>  		.probe_type	= PROBE_PREFER_ASYNCHRONOUS,
>>>
>>
>>
> 
> 


  reply	other threads:[~2026-02-03 20:21 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-03  2:52 [PATCH v15 0/9] Enable CXL PCIe Port Protocol Error handling and logging Terry Bowman
2026-02-03  2:52 ` [PATCH v15 1/9] PCI/AER: Introduce AER-CXL Kfifo in new file, pcie/aer_cxl_vh.c Terry Bowman
2026-02-04  4:25   ` dan.j.williams
2026-02-03  2:52 ` [PATCH v15 2/9] cxl: Update CXL Endpoint tracing Terry Bowman
2026-02-04  4:29   ` dan.j.williams
2026-02-03  2:52 ` [PATCH v15 3/9] PCI/ERR: Introduce PCI_ERS_RESULT_PANIC Terry Bowman
2026-02-03  2:52 ` [PATCH v15 4/9] PCI/AER: Dequeue forwarded CXL error Terry Bowman
2026-02-03 15:26   ` Jonathan Cameron
2026-02-03 17:00     ` Bowman, Terry
2026-02-05 17:13       ` Jonathan Cameron
2026-02-04  4:46   ` dan.j.williams
2026-02-03  2:52 ` [PATCH v15 5/9] PCI: Establish common CXL Port protocol error flow Terry Bowman
2026-02-03 15:40   ` Jonathan Cameron
2026-02-03 18:21     ` Bowman, Terry
2026-02-05 17:16       ` Jonathan Cameron
2026-02-04  5:08   ` dan.j.williams
2026-02-04 17:11     ` Bowman, Terry
2026-02-04 21:22       ` dan.j.williams
2026-02-05 16:07         ` Bowman, Terry
2026-02-05 21:17           ` dan.j.williams
2026-02-03  2:52 ` [PATCH v15 6/9] cxl: Update error handlers to support CXL Port protocol errors Terry Bowman
2026-02-03 15:54   ` Jonathan Cameron
2026-02-03  2:52 ` [PATCH v15 7/9] cxl: Update Endpoint AER uncorrectable handler Terry Bowman
2026-02-03 16:18   ` Jonathan Cameron
2026-02-03 17:31   ` Dave Jiang
2026-02-03 18:35     ` Bowman, Terry
2026-02-03 18:49       ` Dave Jiang
2026-02-03 20:21         ` Dave Jiang [this message]
2026-02-03  2:52 ` [PATCH v15 8/9] cxl: Remove Endpoint AER correctable handler Terry Bowman
2026-02-03 16:27   ` Jonathan Cameron
2026-02-03  2:52 ` [PATCH v15 9/9] cxl: Enable CXL protocol error reporting Terry Bowman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87136790-756f-44c8-b8c5-5d1de50ac5e4@intel.com \
    --to=dave.jiang@intel.com \
    --cc=Benjamin.Cheatham@amd.com \
    --cc=PradeepVineshReddy.Kodamati@amd.com \
    --cc=Smita.KoralahalliChannabasappa@amd.com \
    --cc=alison.schofield@intel.com \
    --cc=alucerop@amd.com \
    --cc=bhelgaas@google.com \
    --cc=dan.carpenter@linaro.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=ming.li@zohomail.com \
    --cc=rrichter@amd.com \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=shiju.jose@huawei.com \
    --cc=terry.bowman@amd.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox