From: Fan Ni <nifan.cxl@gmail.com>
To: Davidlohr Bueso <dave@stgolabs.net>
Cc: jonathan.cameron@huawei.com, dan.j.williams@intel.com,
a.manzanares@samsung.com, linux-cxl@vger.kernel.org
Subject: Re: [PATCH 2/3] cxl: Support Get/Set Shutdown State commands
Date: Sat, 21 Dec 2024 11:18:48 -0800 [thread overview]
Message-ID: <Z2cUmMEh433UjgKm@gpd> (raw)
In-Reply-To: <20241220160026.204055-3-dave@stgolabs.net>
On Fri, Dec 20, 2024 at 08:00:25AM -0800, Davidlohr Bueso wrote:
> As per the latest spec, add mailbox commands 4203h and 4204h.
> While upon reboot this operation is obviously a nop (flag is
> cleared but the dirty shutdown count is not increased), it
> can still serve to test some basic paths.
>
> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
...
> ---
> hw/cxl/cxl-mailbox-utils.c | 49 +++++++++++++++++++++++++++++++++++++
> include/hw/cxl/cxl_device.h | 2 ++
> 2 files changed, 51 insertions(+)
>
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index f6f993e7bc4f..ff1d3f50610c 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -86,6 +86,9 @@ enum {
> #define GET_PARTITION_INFO 0x0
> #define GET_LSA 0x2
> #define SET_LSA 0x3
> + HEALTH_INFO_ALERTS = 0x42,
> + #define GET_SHUTDOWN_STATE 0x3
> + #define SET_SHUTDOWN_STATE 0x4
> MEDIA_AND_POISON = 0x43,
> #define GET_POISON_LIST 0x0
> #define INJECT_POISON 0x1
> @@ -1721,6 +1724,48 @@ static CXLRetCode cmd_sanitize_overwrite(const struct cxl_cmd *cmd,
> return CXL_MBOX_BG_STARTED;
> }
>
> +/* CXL r3.2 Section 8.2.10.9.3.4: Get Shutdown State (Opcode 4203h) */
> +static CXLRetCode cmd_health_get_shutdown_state(const struct cxl_cmd *cmd,
> + uint8_t *payload_in,
> + size_t len_in,
> + uint8_t *payload_out,
> + size_t *len_out,
> + CXLCCI *cci)
> +{
> + CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> + CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate;
> + struct get_shutdown_state_pl {
> + uint8_t state;
> + } QEMU_PACKED;
> + struct get_shutdown_state_pl *out = (void *)payload_out;
> +
> + out->state = cxl_dstate->shutdown_state;
> + *len_out = sizeof(out);
> +
> + return CXL_MBOX_SUCCESS;
> +}
> +
> +/* CXL r3.2 Section 8.2.10.9.3.5: Set Shutdown State (Opcode 4204h) */
> +static CXLRetCode cmd_health_set_shutdown_state(const struct cxl_cmd *cmd,
> + uint8_t *payload_in,
> + size_t len_in,
> + uint8_t *payload_out,
> + size_t *len_out,
> + CXLCCI *cci)
> +{
> + CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> + CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate;
> + struct set_shutdown_state_pl {
> + uint8_t state;
> + } QEMU_PACKED;
> + struct set_shutdown_state_pl *in = (void *)payload_in;
Do we need to check the input size and return invalid input payload
size?
> +
> + cxl_dstate->shutdown_state = in->state;
> + *len_out = 0;
> +
> + return CXL_MBOX_SUCCESS;
> +}
> +
> static CXLRetCode cmd_get_security_state(const struct cxl_cmd *cmd,
> uint8_t *payload_in,
> size_t len_in,
> @@ -2866,6 +2911,10 @@ static const struct cxl_cmd cxl_cmd_set[256][256] = {
> CXL_MBOX_BACKGROUND_OPERATION_ABORT)},
> [PERSISTENT_MEM][GET_SECURITY_STATE] = { "GET_SECURITY_STATE",
> cmd_get_security_state, 0, 0 },
> + [HEALTH_INFO_ALERTS][GET_SHUTDOWN_STATE] = { "HEALTH_INFO_ALERTS_GET_SHUTDOWN_STATE",
> + cmd_health_get_shutdown_state, 0, 0 },
> + [HEALTH_INFO_ALERTS][SET_SHUTDOWN_STATE] = { "HEALTH_INFO_ALERTS_SET_SHUTDOWN_STATE",
> + cmd_health_set_shutdown_state, 1, 0 },
Per the spec, I think the return value should be CXL_MBOX_IMMEDIATE_POLICY_CHANGE.
Fan
> [MEDIA_AND_POISON][GET_POISON_LIST] = { "MEDIA_AND_POISON_GET_POISON_LIST",
> cmd_media_get_poison_list, 16, 0 },
> [MEDIA_AND_POISON][INJECT_POISON] = { "MEDIA_AND_POISON_INJECT_POISON",
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index a64739be25e9..69e6330fe66d 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -292,6 +292,8 @@ typedef struct cxl_device_state {
> CPMUState cpmu[CXL_NUM_CPMU_INSTANCES];
> CHMUState chmu[1];
> CXLEventLog event_logs[CXL_EVENT_TYPE_MAX];
> +
> + uint8_t shutdown_state;
> } CXLDeviceState;
>
> /* Initialize the register block for a device */
> --
> 2.39.5
>
next prev parent reply other threads:[~2024-12-21 19:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-20 16:00 [PATCH -qemu 0/3] hw/cxl: Support dirty shutdown Davidlohr Bueso
2024-12-20 16:00 ` [PATCH 1/3] cxl: Fix mbox cmd enum order Davidlohr Bueso
2024-12-21 19:05 ` Fan Ni
2024-12-20 16:00 ` [PATCH 2/3] cxl: Support Get/Set Shutdown State commands Davidlohr Bueso
2024-12-21 19:18 ` Fan Ni [this message]
2024-12-23 19:57 ` Jonathan Cameron
2024-12-23 20:01 ` Jonathan Cameron
2024-12-20 16:00 ` [PATCH 3/3] cxl/type3: Add 'dirty-shutdown' parameter Davidlohr Bueso
2024-12-23 20:08 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z2cUmMEh433UjgKm@gpd \
--to=nifan.cxl@gmail.com \
--cc=a.manzanares@samsung.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox