Linux CXL
 help / color / mirror / Atom feed
From: Alison Schofield <alison.schofield@intel.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>,
	Jonathan Cameron <jonathan.cameron@huawei.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	Ira Weiny <ira.weiny@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	linux-cxl@vger.kernel.org
Subject: Re: [PATCH v2 2/2] cxl/region: Remove a soft reserved resource at region teardown
Date: Mon, 14 Aug 2023 17:13:05 -0700	[thread overview]
Message-ID: <ZNrDEY4G5oAwChy9@aschofie-mobl2> (raw)
In-Reply-To: <f0d84d36-44a5-840c-9ff3-0dcdfdeb69ee@intel.com>

On Wed, Aug 09, 2023 at 04:34:43PM -0700, Dave Jiang wrote:
> 
> 
> On 8/4/23 12:31, alison.schofield@intel.com wrote:
> > From: Alison Schofield <alison.schofield@intel.com>
> > 
> > When CXL regions are created through autodiscovery their resource
> > may be a child of a soft reserved resource. Today, when such a
> > region is destroyed, its soft reserved resource remains in place.
> > That means that the HPA range that the region could release, is
> > actually unavailable for reuse.
> 
> I think it reads better without the comma here.

Agree. Thanks!
Alison

> 
> > 
> > Free the soft reserved resource on region teardown by examining
> > the alignment of the resources, and handling accordingly. The
> > two resources, will be exactly aligned, partially aligned, or not
> > aligned at all.
> > 
> > |----------- "Soft Reserved" -----------|
> > |-------------- "Region #" -------------|
> > Exactly aligned. Any dangling children move up to a parent on removal.
> > The removal of this soft reserved seems guaranteed, however, the
> > availability of the address range for use depends on complete cleanup
> > of the region child resources also.
> > 
> > |----------- "Soft Reserved" -----------|
> > |-------- "Region #" -------|
> > or
> > |----------- "Soft Reserved" -----------|
> >              |-------- "Region #" -------|
> > Either start or end aligns. Unlike removing a resource, which simply
> > moves child resources up the resource tree, adjustments fail if any
> > child resources map the range being truncated. So, this one will fail
> > for dangling child resources of the region.
> > 
> > |---------- "Soft Reserved" ----------|
> >          |---- "Region #" ----|
> > No alignment. Freeing the resource of a region in the middle is possible
> > if no child resources map the leading or trailing address space.
> > 
> > Signed-off-by: Alison Schofield <alison.schofield@intel.com>
> > ---
> >   drivers/cxl/core/region.c | 132 +++++++++++++++++++++++++++++++++++---
> >   1 file changed, 123 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> > index 36c0c0dd5697..b8a02afa3514 100644
> > --- a/drivers/cxl/core/region.c
> > +++ b/drivers/cxl/core/region.c
> > @@ -569,22 +569,136 @@ static int alloc_hpa(struct cxl_region *cxlr, resource_size_t size)
> >   	return 0;
> >   }
> > +static int add_soft_reserved(struct resource *parent, resource_size_t start,
> > +			     resource_size_t len, unsigned long flags)
> > +{
> > +	struct resource *res;
> > +	int rc;
> > +
> > +	res = kmalloc(sizeof(*res), GFP_KERNEL);
> > +	if (!res)
> > +		return -ENOMEM;
> > +
> > +	*res = DEFINE_RES_MEM_NAMED(start, len, "Soft Reserved");
> > +
> > +	res->desc = IORES_DESC_SOFT_RESERVED;
> > +	res->flags = res->flags | flags;
> > +	rc = insert_resource(parent, res);
> > +	if (rc)
> > +		kfree(res);
> > +
> > +	return rc;
> > +}
> > +
> > +static void remove_soft_reserved(struct cxl_region *cxlr, struct resource *soft,
> > +				 resource_size_t start, resource_size_t end)
> > +{
> > +	struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(cxlr->dev.parent);
> > +	resource_size_t new_start, new_end;
> > +	struct resource *parent;
> > +	unsigned long flags;
> > +	int rc;
> > +
> > +	/* Prevent new usage while removing or adjusting the resource */
> > +	mutex_lock(&cxlrd->range_lock);
> > +
> > +	/* Aligns at both resource start and end */
> > +	if (soft->start == start && soft->end == end) {
> > +		rc = remove_resource(soft);
> > +		if (rc)
> > +			dev_dbg(&cxlr->dev,
> > +				"cannot remove soft reserved resource %pr\n",
> > +				soft);
> > +		else
> > +			kfree(soft);
> > +
> > +		goto out;
> > +	}
> > +
> > +	/* Aligns at either resource start or end */
> > +	if (soft->start == start || soft->end == end) {
> > +		if (soft->start == start) {
> > +			new_start = end + 1;
> > +			new_end = soft->end;
> > +		} else {
> > +			new_start = soft->start;
> > +			new_end = start + 1;
> > +		}
> > +		rc =  adjust_resource(soft, new_start, new_end - new_start + 1);
> > +		if (rc)
> > +			dev_dbg(&cxlr->dev,
> > +				"cannot adjust soft reserved resource %pr\n",
> > +				soft);
> > +		goto out;
> > +	}
> > +
> > +	/*
> > +	 * No alignment. Attempt a 3-way split that removes the part of
> > +	 * the resource the region occupied, and then creates new soft
> > +	 * reserved resources for the leading and trailing addr space.
> > +	 * adjust_resource() will stop the attempt if there are any
> > +	 * child resources.
> > +	 */
> > +
> > +	/* Save the original soft reserved resource params before adjusting */
> > +	new_start = soft->start;
> > +	new_end = soft->end;
> > +	parent = soft->parent;
> > +	flags = soft->flags;
> > +
> > +	rc = adjust_resource(soft, start, end - start);
> > +	if (rc) {
> > +		dev_dbg(&cxlr->dev,
> > +			"cannot adjust soft reserved resource %pr\n", soft);
> > +		goto out;
> > +	}
> > +	rc = remove_resource(soft);
> > +	if (rc)
> > +		dev_warn(&cxlr->dev,
> > +			 "cannot remove soft reserved resource %pr\n", soft);
> > +
> > +	rc = add_soft_reserved(parent, new_start, start - new_start, flags);
> > +	if (rc)
> > +		dev_warn(&cxlr->dev,
> > +			 "cannot add new soft reserved resource at %pa\n",
> > +			 &new_start);
> > +
> > +	rc = add_soft_reserved(parent, end + 1, new_end - end, flags);
> > +	if (rc)
> > +		dev_warn(&cxlr->dev,
> > +			 "cannot add new soft reserved resource at %pa + 1\n",
> > +			 &end);
> > +out:
> > +	mutex_unlock(&cxlrd->range_lock);
> > +}
> > +
> >   static void cxl_region_iomem_release(struct cxl_region *cxlr)
> >   {
> >   	struct cxl_region_params *p = &cxlr->params;
> > +	struct resource *parent, *res = p->res;
> > +	resource_size_t start, end;
> >   	if (device_is_registered(&cxlr->dev))
> >   		lockdep_assert_held_write(&cxl_region_rwsem);
> > -	if (p->res) {
> > -		/*
> > -		 * Autodiscovered regions may not have been able to insert their
> > -		 * resource.
> > -		 */
> > -		if (p->res->parent)
> > -			remove_resource(p->res);
> > -		kfree(p->res);
> > -		p->res = NULL;
> > +	if (!res)
> > +		return;
> > +	/*
> > +	 * Autodiscovered regions may not have been able to insert their
> > +	 * resource. If a Soft Reserved parent resource exists, try to
> > +	 * remove that also.
> > +	 */
> > +	if (p->res->parent) {
> > +		parent = p->res->parent;
> > +		start = p->res->start;
> > +		end = p->res->end;
> > +		remove_resource(p->res);
> > +		if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags) &&
> > +		    parent->desc == IORES_DESC_SOFT_RESERVED)
> > +			remove_soft_reserved(cxlr, parent, start, end);
> >   	}
> > +
> > +	kfree(p->res);
> > +	p->res = NULL;
> >   }
> >   static int free_hpa(struct cxl_region *cxlr)

      reply	other threads:[~2023-08-15  0:14 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-04 19:31 [PATCH v2 0/2] cxl/region: Improve Soft Reserved resource handling alison.schofield
2023-08-04 19:31 ` [PATCH v2 1/2] cxl/region: Try to add a region resource to a soft reserved parent alison.schofield
2023-08-07 14:24   ` Jonathan Cameron
2023-08-15  0:10     ` Alison Schofield
2023-08-09 23:22   ` Dave Jiang
2023-08-15  0:12     ` Alison Schofield
2023-08-04 19:31 ` [PATCH v2 2/2] cxl/region: Remove a soft reserved resource at region teardown alison.schofield
2023-08-09 23:34   ` Dave Jiang
2023-08-15  0:13     ` Alison Schofield [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZNrDEY4G5oAwChy9@aschofie-mobl2 \
    --to=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox