Re: [PATCH v7] cxl: add RAS status unmasking for CXL

[Dave Jiang <dave.jiang@intel.com>]

On 2/13/23 1:32 PM, Dave Jiang wrote:
> By default the CXL RAS mask registers bits are defaulted to 1's and
> suppress all error reporting. If the kernel has negotiated ownership
> of error handling for CXL then unmask the mask registers by writing 0s.
> 
> PCI_EXP_DEVCTL capability is checked to see uncorrectable or correctable
> errors bits are set before unmasking the respective errors.
> 
> CXL RAS CE and UE masks are checked against PCI_EXP_AER_FLAGS before
> unmasking.

Grrrrr cross eyed. Deleted the first paragraph but somehow missed this one.

> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
> 
> ---
> Patch based on top of:
> ttps://lore.kernel.org/linux-cxl/167632012093.4153151.5360778069735064322.stgit@djiang5-mobl3.local/T/#u
> 
> v7:
> - Check PCI_EXP_DEVCTL to enable related RAS errors.
> v6:
> - Call cxl_pci_ras_unmask() based on return of pci_enable_pcie_error_reporting()
> - Check PCI_EXP_DEVCTL for UE and CE bit before unmasking the respective error reporting.
> 
> v5:
> - Add single debug out to show mask changing. (Dan)
> 
> v4:
> - Fix masking of RAS register. (Jonathan)
> 
> v3:
> - Remove flex bus port status check. (Jonathan)
> - Only unmask known mask bits. (Jonathan)
> 
> v2:
> - Add definition of PCI_EXP_LNKSTA2_FLIT. (Dan)
> - Return error for cxl_pci_ras_unmask(). (Dan)
> - Add dev_dbg() for register bits to be cleared. (Dan)
> - Check Flex Port DVSEC status. (Dan)
> ---
>   drivers/cxl/cxl.h             |    1 +
>   drivers/cxl/pci.c             |   65 +++++++++++++++++++++++++++++++++++++++++
>   include/uapi/linux/pci_regs.h |    1 +
>   3 files changed, 67 insertions(+)
> 
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index b3964149c77b..d640fe61b893 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -130,6 +130,7 @@ static inline int ways_to_eiw(unsigned int ways, u8 *eiw)
>   #define   CXL_RAS_UNCORRECTABLE_STATUS_MASK (GENMASK(16, 14) | GENMASK(11, 0))
>   #define CXL_RAS_UNCORRECTABLE_MASK_OFFSET 0x4
>   #define   CXL_RAS_UNCORRECTABLE_MASK_MASK (GENMASK(16, 14) | GENMASK(11, 0))
> +#define   CXL_RAS_UNCORRECTABLE_MASK_F256B_MASK BIT(8)
>   #define CXL_RAS_UNCORRECTABLE_SEVERITY_OFFSET 0x8
>   #define   CXL_RAS_UNCORRECTABLE_SEVERITY_MASK (GENMASK(16, 14) | GENMASK(11, 0))
>   #define CXL_RAS_CORRECTABLE_STATUS_OFFSET 0xC
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index c87340095a8a..4218581d14b7 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -637,6 +637,67 @@ static int cxl_event_config(struct pci_host_bridge *host_bridge,
>   	return 0;
>   }
>   
> +/*
> + * CXL v3.0 6.2.3 Table 6-4
> + * The table indicates that if PCIe Flit Mode is set, then CXL is in 256B flits
> + * mode, otherwise it's 68B flits mode.
> + */
> +static bool cxl_pci_flit_256(struct pci_dev *pdev)
> +{
> +	u32 lnksta2;
> +
> +	pcie_capability_read_dword(pdev, PCI_EXP_LNKSTA2, &lnksta2);
> +	return lnksta2 & PCI_EXP_LNKSTA2_FLIT;
> +}
> +
> +static int cxl_pci_ras_unmask(struct pci_dev *pdev)
> +{
> +	struct pci_host_bridge *host_bridge = pci_find_host_bridge(pdev->bus);
> +	struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
> +	void __iomem *addr;
> +	u32 orig_val, val, mask;
> +	u16 cap;
> +	int rc;
> +
> +	if (!cxlds->regs.ras) {
> +		dev_dbg(&pdev->dev, "No RAS registers.\n");
> +		return 0;
> +	}
> +
> +	/* BIOS has CXL error control */
> +	if (!host_bridge->native_cxl_error)
> +		return -EOPNOTSUPP;
> +
> +	rc = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap);
> +	if (rc)
> +		return rc;
> +
> +	if (cap & PCI_EXP_DEVCTL_URRE) {
> +		addr = cxlds->regs.ras + CXL_RAS_UNCORRECTABLE_MASK_OFFSET;
> +		orig_val = readl(addr);
> +
> +		mask = CXL_RAS_UNCORRECTABLE_MASK_MASK;
> +		if (!cxl_pci_flit_256(pdev))
> +			mask &= ~CXL_RAS_UNCORRECTABLE_MASK_F256B_MASK;
> +		val = orig_val & ~mask;
> +		writel(val, addr);
> +		dev_dbg(&pdev->dev,
> +			"Uncorrectable RAS Errors Mask: %#x -> %#x\n",
> +			orig_val, val);
> +	}
> +
> +	if (cap & PCI_EXP_DEVCTL_CERE) {
> +		addr = cxlds->regs.ras + CXL_RAS_CORRECTABLE_MASK_OFFSET;
> +		orig_val = readl(addr);
> +		val = orig_val & ~CXL_RAS_CORRECTABLE_MASK_MASK;
> +		writel(val, addr);
> +		dev_dbg(&pdev->dev, "Correctable RAS Errors Mask: %#x -> %#x\n",
> +			orig_val, val);
> +	}
> +
> +	return 0;
> +}
> +
>   static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>   {
>   	struct pci_host_bridge *host_bridge = pci_find_host_bridge(pdev->bus);
> @@ -728,6 +789,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>   	if (rc)
>   		return rc;
>   
> +	rc = cxl_pci_ras_unmask(pdev);
> +	if (rc)
> +		dev_warn(&pdev->dev, "No RAS reporting unmasked\n");
> +
>   	pci_save_state(pdev);
>   
>   	return rc;
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index 85ab1278811e..dc2000e0fe3a 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -693,6 +693,7 @@
>   #define  PCI_EXP_LNKCTL2_TX_MARGIN	0x0380 /* Transmit Margin */
>   #define  PCI_EXP_LNKCTL2_HASD		0x0020 /* HW Autonomous Speed Disable */
>   #define PCI_EXP_LNKSTA2		0x32	/* Link Status 2 */
> +#define  PCI_EXP_LNKSTA2_FLIT		0x0400 /* Flit Mode Status */
>   #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	0x32	/* end of v2 EPs w/ link */
>   #define PCI_EXP_SLTCAP2		0x34	/* Slot Capabilities 2 */
>   #define  PCI_EXP_SLTCAP2_IBPD	0x00000001 /* In-band PD Disable Supported */
> 
>