linux-cxl.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: Li Ming <ming.li@zohomail.com>,
	dave@stgolabs.net, jonathan.cameron@huawei.com,
	alison.schofield@intel.com, vishal.l.verma@intel.com,
	ira.weiny@intel.com, dan.j.williams@intel.com,
	shiju.jose@huawei.com
Cc: linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/2] cxl/edac: Fix the min_scrub_cycle of a region miscalculation
Date: Tue, 3 Jun 2025 15:39:26 -0700	[thread overview]
Message-ID: <e664212f-728b-44d3-b0da-ade53c088cb1@intel.com> (raw)
In-Reply-To: <20250603104314.25569-1-ming.li@zohomail.com>



On 6/3/25 3:43 AM, Li Ming wrote:
> When trying to update the scrub_cycle value of a cxl region, which means
> updating the scrub_cycle value of each memdev under a cxl region. cxl
> driver needs to guarantee the new scrub_cycle value is greater than the
> min_scrub_cycle value of a memdev, otherwise the updating operation will
> fail(Per Table 8-223 in CXL r3.2 section 8.2.10.9.11.1).
> 
> Current implementation logic of getting the min_scrub_cycle value of a
> cxl region is that getting the min_scrub_cycle value of each memdevs
> under the cxl region, then using the minimum min_scrub_cycle value as
> the region's min_scrub_cycle. Checking if the new scrub_cycle value is
> greater than this value. If yes, updating the new scrub_cycle value to
> each memdevs. The issue is that the new scrub_cycle value is possibly
> greater than the minimum min_scrub_cycle value of all memdevs but less
> than the maximum min_scrub_cycle value of all memdevs if memdevs have
> a different min_scrub_cycle value. The updating operation will always
> fail on these memdevs which have a greater min_scrub_cycle than the new
> scrub_cycle.
> 
> The correct implementation logic is to get the maximum value of these
> memdevs' min_scrub_cycle, check if the new scrub_cycle value is greater
> than the value. If yes, the new scrub_cycle value is fit for the region.
> 
> The change also impacts the result of
> cxl_patrol_scrub_get_min_scrub_cycle(), the interface returned the
> minimum min_scrub_cycle value among all memdevs under the region before
> the change. The interface will return the maximum min_scrub_cycle value
> among all memdevs under the region with the change.
> 
> Signed-off-by: Li Ming <ming.li@zohomail.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>

> ---
> Changes from RFC:
> 1. Add more description about the max scrub cycle. (Alison)
> 2. Add more description about the min scrub cycle of a region. (Alison)
> 3. Drop RFC tag.
> 
> base-commit: 9f153b7fb5ae45c7d426851f896487927f40e501 cxl/next
> ---
>  drivers/cxl/core/edac.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/cxl/core/edac.c b/drivers/cxl/core/edac.c
> index 2cbc664e5d62..0ef245d0bd9f 100644
> --- a/drivers/cxl/core/edac.c
> +++ b/drivers/cxl/core/edac.c
> @@ -103,10 +103,10 @@ static int cxl_scrub_get_attrbs(struct cxl_patrol_scrub_context *cxl_ps_ctx,
>  				u8 *cap, u16 *cycle, u8 *flags, u8 *min_cycle)
>  {
>  	struct cxl_mailbox *cxl_mbox;
> -	u8 min_scrub_cycle = U8_MAX;
>  	struct cxl_region_params *p;
>  	struct cxl_memdev *cxlmd;
>  	struct cxl_region *cxlr;
> +	u8 min_scrub_cycle = 0;
>  	int i, ret;
>  
>  	if (!cxl_ps_ctx->cxlr) {
> @@ -133,8 +133,12 @@ static int cxl_scrub_get_attrbs(struct cxl_patrol_scrub_context *cxl_ps_ctx,
>  		if (ret)
>  			return ret;
>  
> +		/*
> +		 * The min_scrub_cycle of a region is the max of minimum scrub
> +		 * cycles supported by memdevs that back the region.
> +		 */
>  		if (min_cycle)
> -			min_scrub_cycle = min(*min_cycle, min_scrub_cycle);
> +			min_scrub_cycle = max(*min_cycle, min_scrub_cycle);
>  	}
>  
>  	if (min_cycle)


  parent reply	other threads:[~2025-06-03 22:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-03 10:43 [PATCH v1 1/2] cxl/edac: Fix the min_scrub_cycle of a region miscalculation Li Ming
2025-06-03 10:43 ` [PATCH v1 2/2] cxl/Documentation: Add more description about min/max scrub cycle Li Ming
2025-06-03 22:41   ` Dave Jiang
2025-06-09 17:05   ` Jonathan Cameron
2025-06-10 16:24   ` Davidlohr Bueso
2025-06-03 17:06 ` [PATCH v1 1/2] cxl/edac: Fix the min_scrub_cycle of a region miscalculation Shiju Jose
2025-06-03 22:39 ` Dave Jiang [this message]
2025-06-09 17:06 ` Jonathan Cameron
2025-06-09 20:48 ` Dave Jiang
2025-06-10 16:13 ` Davidlohr Bueso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e664212f-728b-44d3-b0da-ade53c088cb1@intel.com \
    --to=dave.jiang@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ming.li@zohomail.com \
    --cc=shiju.jose@huawei.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).