* RE: [RESEND PATCH] dt-bindings: usb: samsung,exynos-usb2: include usb-hcd schema
2022-04-07 19:26 ` [RESEND PATCH] dt-bindings: usb: samsung,exynos-usb2: include usb-hcd schema Krzysztof Kozlowski
@ 2022-04-08 3:03 ` Alim Akhtar
0 siblings, 0 replies; 2+ messages in thread
From: Alim Akhtar @ 2022-04-08 3:03 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Greg Kroah-Hartman',
'Rob Herring', 'Krzysztof Kozlowski', linux-usb,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: 'Rob Herring'
Hi Krzysztof
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@linaro.org]
>Sent: Friday, April 8, 2022 12:56 AM
>To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Rob Herring
><robh+dt@kernel.org>; Krzysztof Kozlowski
><krzysztof.kozlowski+dt@linaro.org>; Alim Akhtar
><alim.akhtar@samsung.com>; linux-usb@vger.kernel.org;
>devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
>samsung-soc@vger.kernel.org; linux-kernel@vger.kernel.org
>Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>; Rob Herring
><robh@kernel.org>
>Subject: [RESEND PATCH] dt-bindings: usb: samsung,exynos-usb2: include
>usb-hcd schema
>
>Remove parts duplicated with usb-hcd.yaml DT schema and include it
directly.
>
>Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>Reviewed-by: Rob Herring <robh@kernel.org>
>---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> .../bindings/usb/samsung,exynos-usb2.yaml | 15 ++-------------
> 1 file changed, 2 insertions(+), 13 deletions(-)
>
>diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-
>usb2.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-
>usb2.yaml
>index 340dff8d19c3..d51f91d1139f 100644
>--- a/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
>+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
>@@ -15,9 +15,6 @@ properties:
> - samsung,exynos4210-ehci
> - samsung,exynos4210-ohci
>
>- '#address-cells':
>- const: 1
>-
> clocks:
> maxItems: 1
>
>@@ -46,15 +43,6 @@ properties:
> Only for controller in EHCI mode, if present, specifies the GPIO
that
> needs to be pulled up for the bus to be powered.
>
>- '#size-cells':
>- const: 0
>-
>-patternProperties:
>- "^.*@[0-9a-f]{1,2}$":
>- description: The hard wired USB devices
>- type: object
>- $ref: /usb/usb-device.yaml
>-
> required:
> - compatible
> - clocks
>@@ -64,6 +52,7 @@ required:
> - phy-names
>
> allOf:
>+ - $ref: usb-hcd.yaml#
> - if:
> properties:
> compatible:
>@@ -73,7 +62,7 @@ allOf:
> properties:
> samsung,vbus-gpio: false
>
>-additionalProperties: false
>+unevaluatedProperties: false
>
> examples:
> - |
>--
>2.32.0
^ permalink raw reply [flat|nested] 2+ messages in thread