From: Seungwon Jeon <tgih.jun@samsung.com>
To: dinguyen@altera.com, dinh.linux@gmail.com
Cc: 'Jaehoon Chung' <jh80.chung@samsung.com>,
'Rob Herring' <rob.herring@calxeda.com>,
'Pawel Moll' <pawel.moll@arm.com>,
'Mark Rutland' <mark.rutland@arm.com>,
'Stephen Warren' <swarren@wwwdotorg.org>,
'Ian Campbell' <ian.campbell@citrix.com>,
'Chris Ball' <cjb@laptop.org>,
devicetree@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: RE: [PATCHv5 3/3] mmc: dw_mmc: Use phandle to get SDR timing values from sys-mgr
Date: Thu, 29 Aug 2013 20:56:33 +0900 [thread overview]
Message-ID: <001501cea4ae$cf1381f0$6d3a85d0$%jun@samsung.com> (raw)
In-Reply-To: <1377272686-13253-3-git-send-email-dinguyen@altera.com>
On Saturday, August 24, 2013, Dinh Nguyen wrote:
> From: Dinh Nguyen <dinguyen@altera.com>
>
> Update the driver to get the system manager node from a phandle. Also, the
> driver can get the correct clock value from the common clock API, thus the
> "altr,dw-mshc-ciu-div" binding is not needed at all.
>
> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
> Cc: Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Seungwon Jeon <tgih.jun@samsung.com>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ian.campbell@citrix.com>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-mmc@vger.kernel.org
> CC: linux-arm-kernel@lists.infradead.org
>
> v2:
> - Use "altr,ciu-clk-offset" to get the correct CIU clock values to be
> set in the system manager.
> ---
> drivers/mmc/host/dw_mmc-socfpga.c | 33 +++++++++++++++------------------
> 1 file changed, 15 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc-socfpga.c b/drivers/mmc/host/dw_mmc-socfpga.c
> index 14b5961..cfd67e1 100644
> --- a/drivers/mmc/host/dw_mmc-socfpga.c
> +++ b/drivers/mmc/host/dw_mmc-socfpga.c
> @@ -24,21 +24,20 @@
> #include "dw_mmc.h"
> #include "dw_mmc-pltfm.h"
>
> -#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108
> -#define DRV_CLK_PHASE_SHIFT_SEL_MASK 0x7
> -#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
> - ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0))
> +#define DRV_CLK_PHASE_SHIFT_SEL_MASK 0x7
>
> /* SOCFPGA implementation specific driver private data */
> struct dw_mci_socfpga_priv_data {
> - u8 ciu_div; /* card interface unit divisor */
> u32 hs_timing; /* bitmask for CIU clock phase shift */
> struct regmap *sysreg; /* regmap for system manager register */
> + /* Offset for the ciu clock setting register inside the system manager.*/
> + u32 ciu_clk_offset;
> };
>
> static int dw_mci_socfpga_priv_init(struct dw_mci *host)
> {
> struct dw_mci_socfpga_priv_data *priv;
> + struct device_node *np = host->dev->of_node;
>
> priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
> if (!priv) {
> @@ -46,9 +45,9 @@ static int dw_mci_socfpga_priv_init(struct dw_mci *host)
> return -ENOMEM;
> }
>
> - priv->sysreg = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
> + priv->sysreg = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr");
> if (IS_ERR(priv->sysreg)) {
> - dev_err(host->dev, "regmap for altr,sys-mgr lookup failed.\n");
> + dev_err(host->dev, "No sysmgr phandle specified!\n");
> return PTR_ERR(priv->sysreg);
> }
> host->priv = priv;
> @@ -61,11 +60,8 @@ static int dw_mci_socfpga_setup_clock(struct dw_mci *host)
> struct dw_mci_socfpga_priv_data *priv = host->priv;
>
> clk_disable_unprepare(host->ciu_clk);
> - regmap_write(priv->sysreg, SYSMGR_SDMMCGRP_CTRL_OFFSET,
> - priv->hs_timing);
> + regmap_write(priv->sysreg, priv->ciu_clk_offset, priv->hs_timing);
> clk_prepare_enable(host->ciu_clk);
> -
> - host->bus_hz /= (priv->ciu_div + 1);
> return 0;
> }
>
> @@ -82,20 +78,21 @@ static int dw_mci_socfpga_parse_dt(struct dw_mci *host)
> struct dw_mci_socfpga_priv_data *priv = host->priv;
> struct device_node *np = host->dev->of_node;
> u32 timing[2];
> - u32 div = 0;
> + u32 offset[3];
> int ret;
>
> - ret = of_property_read_u32(np, "altr,dw-mshc-ciu-div", &div);
> - if (ret)
> - dev_info(host->dev, "No dw-mshc-ciu-div specified, assuming 1");
> - priv->ciu_div = div;
> -
> ret = of_property_read_u32_array(np,
> "altr,dw-mshc-sdr-timing", timing, 2);
> if (ret)
> return ret;
>
> - priv->hs_timing = SYSMGR_SDMMC_CTRL_SET(timing[0], timing[1]);
> + ret = of_property_read_u32_array(np, "altr,ciu-clk-offset", offset, 3);
> + if (ret)
> + return ret;
> +
> + priv->ciu_clk_offset = offset[0];
> + priv->hs_timing =
> + ((((timing[0]) & 0x7) << offset[2]) | (((timing[1]) & 0x7) << offset[1]));
offset should be gotten from DT?
These are variable?
Thanks,
Seungwon Jeon
> return 0;
> }
>
> --
> 1.7.9.5
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2013-08-29 11:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1377272686-13253-1-git-send-email-dinguyen@altera.com>
[not found] ` <1377272686-13253-2-git-send-email-dinguyen@altera.com>
[not found] ` <5217E24B.3090302@wwwdotorg.org>
[not found] ` <1377298903.26742.14.camel@linux-builds1>
2013-08-26 16:44 ` [PATCHv5 2/3] ARM: socfpga: dts: Add support for SD/MMC Stephen Warren
2013-08-27 15:31 ` Steffen Trumtrar
[not found] ` <1377272686-13253-3-git-send-email-dinguyen@altera.com>
2013-08-29 11:56 ` Seungwon Jeon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001501cea4ae$cf1381f0$6d3a85d0$%jun@samsung.com' \
--to=tgih.jun@samsung.com \
--cc=cjb@laptop.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@altera.com \
--cc=dinh.linux@gmail.com \
--cc=ian.campbell@citrix.com \
--cc=jh80.chung@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).