[RESEND PATCH V2 2/2] devicetree: Add bindings for DA9063 OnKey

[S Twiss <stwiss.opensource@diasemi.com>]

From: Steve Twiss <stwiss.opensource@diasemi.com>

Add device tree bindings for the DA9063 OnKey driver


Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>

---
Changes from PATCH V1 to V2
---------------------------
- Remove the circular dependency comment linking patches in the main e-mail
- Search and replace 'keyword' with 'property' in onkey sub-node description
- Reformat onkey sub-node content to move the description for disable-key-power
  into a new optional properties sub-section so it has a more promiment
  position

This patch applies against linux-next and v4.0-rc6 


 Documentation/devicetree/bindings/mfd/da9063.txt | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
index 42c6fa6..c671784 100644
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ b/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -2,9 +2,10 @@
 
 DA9093 consists of a large and varied group of sub-devices (I2C Only):
 
-Device                   Supply Names    Description
-------                   ------------    -----------
+Device			 Supply Names	 Description
+------			 ------------	 -----------
 da9063-regulator        :               : LDOs & BUCKs
+da9063-onkey            :               : On Key
 da9063-rtc              :               : Real-Time Clock
 da9063-watchdog         :               : Watchdog
 
@@ -51,6 +52,18 @@ Sub-nodes:
   the DA9063. There are currently no entries in this binding, however
   compatible = "dlg,da9063-rtc" should be added if a node is created.
 
+- onkey : This node defines the OnKey settings for controlling the key
+  functionality of the device. The node should contain the compatible property
+  with the value "dlg,da9063-onkey".
+
+  Optional onkey properties:
+
+  - dlg,disable-key-power : Disable power-down using a long key-press. If this
+    entry exists the OnKey driver will remove support for the KEY_POWER key
+    press. If this entry does not exist then by default the key-press
+    triggered power down is enabled and the OnKey will support both KEY_POWER
+    and KEY_SLEEP.
+
 - watchdog : This node defines settings for the Watchdog timer associated
   with the DA9063. There are currently no entries in this binding, however
   compatible = "dlg,da9063-watchdog" should be added if a node is created.
@@ -73,6 +86,11 @@ Example:
 			compatible = "dlg,da9063-watchdog";
 		};
 
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			dlg,disable-key-power;
+		};
+
 		regulators {
 			DA9063_BCORE1: bcore1 {
 				regulator-name = "BCORE1";
-- 
end-of-patch for RESEND PATCH V2