From: "Alim Akhtar" <alim.akhtar@samsung.com>
To: "'Krzysztof Kozlowski'" <krzysztof.kozlowski@linaro.org>,
"'Sylwester Nawrocki'" <s.nawrocki@samsung.com>,
"'Tomasz Figa'" <tomasz.figa@gmail.com>,
"'Chanwoo Choi'" <cw00.choi@samsung.com>,
"'Michael Turquette'" <mturquette@baylibre.com>,
"'Stephen Boyd'" <sboyd@kernel.org>,
"'Rob Herring'" <robh+dt@kernel.org>,
"'Conor Dooley'" <conor+dt@kernel.org>,
<linux-samsung-soc@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: RE: [PATCH 04/11] clk: samsung: exynos5260: do not define number of clocks in bindings
Date: Thu, 10 Aug 2023 16:56:06 +0530 [thread overview]
Message-ID: <004701d9cb7d$75ee1cb0$61ca5610$@samsung.com> (raw)
In-Reply-To: <20230808082738.122804-5-krzysztof.kozlowski@linaro.org>
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Tuesday, August 8, 2023 1:58 PM
> To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>; Sylwester
> Nawrocki <s.nawrocki@samsung.com>; Tomasz Figa
> <tomasz.figa@gmail.com>; Chanwoo Choi <cw00.choi@samsung.com>; Alim
> Akhtar <alim.akhtar@samsung.com>; Michael Turquette
> <mturquette@baylibre.com>; Stephen Boyd <sboyd@kernel.org>; Rob
> Herring <robh+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>;
> linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org
> Subject: [PATCH 04/11] clk: samsung: exynos5260: do not define number of
> clocks in bindings
>
> Number of clocks supported by Linux drivers might vary - sometimes we add
> new clocks, not exposed previously. Therefore this number of clocks
should
> not be in the bindings, because otherwise we should not change it.
>
> Define number of clocks per each clock controller inside the driver
directly.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> drivers/clk/samsung/clk-exynos5260.c | 41 +++++++++++++++++++---------
> 1 file changed, 28 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5260.c
b/drivers/clk/samsung/clk-
> exynos5260.c
> index e05d7323669a..16da6ef5ca0c 100644
> --- a/drivers/clk/samsung/clk-exynos5260.c
> +++ b/drivers/clk/samsung/clk-exynos5260.c
> @@ -15,6 +15,21 @@
>
> #include <dt-bindings/clock/exynos5260-clk.h>
>
> +/* NOTE: Must be equal to the last clock ID increased by one */
> +#define CLKS_NR_TOP
> (PHYCLK_USBDRD30_UDRD30_PHYCLOCK + 1)
> +#define CLKS_NR_EGL (EGL_DOUT_EGL1 + 1)
> +#define CLKS_NR_KFC (KFC_DOUT_KFC1 + 1)
> +#define CLKS_NR_MIF
> (MIF_SCLK_LPDDR3PHY_WRAP_U0 + 1)
> +#define CLKS_NR_G3D (G3D_CLK_G3D + 1)
> +#define CLKS_NR_AUD (AUD_SCLK_I2S + 1)
> +#define CLKS_NR_MFC (MFC_CLK_SMMU2_MFCM0
> + 1)
> +#define CLKS_NR_GSCL (GSCL_SCLK_CSIS0_WRAP +
> 1)
> +#define CLKS_NR_FSYS (FSYS_PHYCLK_USBHOST20 +
> 1)
> +#define CLKS_NR_PERI (PERI_SCLK_PCM1 + 1)
> +#define CLKS_NR_DISP
> (DISP_MOUT_HDMI_PHY_PIXEL_USER + 1)
> +#define CLKS_NR_G2D (G2D_CLK_SMMU3_G2D + 1)
> +#define CLKS_NR_ISP (ISP_SCLK_UART_EXT + 1)
> +
> /*
> * Applicable for all 2550 Type PLLS for Exynos5260, listed below
> * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
> @@ -135,7 +150,7 @@ static const struct samsung_cmu_info aud_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(aud_div_clks),
> .gate_clks = aud_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(aud_gate_clks),
> - .nr_clk_ids = AUD_NR_CLK,
> + .nr_clk_ids = CLKS_NR_AUD,
> .clk_regs = aud_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(aud_clk_regs),
> };
> @@ -325,7 +340,7 @@ static const struct samsung_cmu_info disp_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(disp_div_clks),
> .gate_clks = disp_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(disp_gate_clks),
> - .nr_clk_ids = DISP_NR_CLK,
> + .nr_clk_ids = CLKS_NR_DISP,
> .clk_regs = disp_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(disp_clk_regs),
> };
> @@ -389,7 +404,7 @@ static const struct samsung_cmu_info egl_cmu
> __initconst = {
> .nr_mux_clks = ARRAY_SIZE(egl_mux_clks),
> .div_clks = egl_div_clks,
> .nr_div_clks = ARRAY_SIZE(egl_div_clks),
> - .nr_clk_ids = EGL_NR_CLK,
> + .nr_clk_ids = CLKS_NR_EGL,
> .clk_regs = egl_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(egl_clk_regs),
> };
> @@ -489,7 +504,7 @@ static const struct samsung_cmu_info fsys_cmu
> __initconst = {
> .nr_mux_clks = ARRAY_SIZE(fsys_mux_clks),
> .gate_clks = fsys_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(fsys_gate_clks),
> - .nr_clk_ids = FSYS_NR_CLK,
> + .nr_clk_ids = CLKS_NR_FSYS,
> .clk_regs = fsys_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(fsys_clk_regs),
> };
> @@ -580,7 +595,7 @@ static const struct samsung_cmu_info g2d_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(g2d_div_clks),
> .gate_clks = g2d_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(g2d_gate_clks),
> - .nr_clk_ids = G2D_NR_CLK,
> + .nr_clk_ids = CLKS_NR_G2D,
> .clk_regs = g2d_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(g2d_clk_regs),
> };
> @@ -643,7 +658,7 @@ static const struct samsung_cmu_info g3d_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(g3d_div_clks),
> .gate_clks = g3d_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(g3d_gate_clks),
> - .nr_clk_ids = G3D_NR_CLK,
> + .nr_clk_ids = CLKS_NR_G3D,
> .clk_regs = g3d_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs),
> };
> @@ -776,7 +791,7 @@ static const struct samsung_cmu_info gscl_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(gscl_div_clks),
> .gate_clks = gscl_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(gscl_gate_clks),
> - .nr_clk_ids = GSCL_NR_CLK,
> + .nr_clk_ids = CLKS_NR_GSCL,
> .clk_regs = gscl_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(gscl_clk_regs),
> };
> @@ -895,7 +910,7 @@ static const struct samsung_cmu_info isp_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(isp_div_clks),
> .gate_clks = isp_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(isp_gate_clks),
> - .nr_clk_ids = ISP_NR_CLK,
> + .nr_clk_ids = CLKS_NR_ISP,
> .clk_regs = isp_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(isp_clk_regs),
> };
> @@ -959,7 +974,7 @@ static const struct samsung_cmu_info kfc_cmu
> __initconst = {
> .nr_mux_clks = ARRAY_SIZE(kfc_mux_clks),
> .div_clks = kfc_div_clks,
> .nr_div_clks = ARRAY_SIZE(kfc_div_clks),
> - .nr_clk_ids = KFC_NR_CLK,
> + .nr_clk_ids = CLKS_NR_KFC,
> .clk_regs = kfc_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(kfc_clk_regs),
> };
> @@ -1015,7 +1030,7 @@ static const struct samsung_cmu_info mfc_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(mfc_div_clks),
> .gate_clks = mfc_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(mfc_gate_clks),
> - .nr_clk_ids = MFC_NR_CLK,
> + .nr_clk_ids = CLKS_NR_MFC,
> .clk_regs = mfc_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(mfc_clk_regs),
> };
> @@ -1164,7 +1179,7 @@ static const struct samsung_cmu_info mif_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(mif_div_clks),
> .gate_clks = mif_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(mif_gate_clks),
> - .nr_clk_ids = MIF_NR_CLK,
> + .nr_clk_ids = CLKS_NR_MIF,
> .clk_regs = mif_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(mif_clk_regs),
> };
> @@ -1370,7 +1385,7 @@ static const struct samsung_cmu_info peri_cmu
> __initconst = {
> .nr_div_clks = ARRAY_SIZE(peri_div_clks),
> .gate_clks = peri_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(peri_gate_clks),
> - .nr_clk_ids = PERI_NR_CLK,
> + .nr_clk_ids = CLKS_NR_PERI,
> .clk_regs = peri_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(peri_clk_regs),
> };
> @@ -1826,7 +1841,7 @@ static const struct samsung_cmu_info top_cmu
> __initconst = {
> .nr_gate_clks = ARRAY_SIZE(top_gate_clks),
> .fixed_clks = fixed_rate_clks,
> .nr_fixed_clks = ARRAY_SIZE(fixed_rate_clks),
> - .nr_clk_ids = TOP_NR_CLK,
> + .nr_clk_ids = CLKS_NR_TOP,
> .clk_regs = top_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(top_clk_regs),
> };
> --
> 2.34.1
next prev parent reply other threads:[~2023-08-10 11:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-08 8:27 [PATCH 00/11] clk: samsung: remove number of clocks from bindings Krzysztof Kozlowski
2023-08-08 8:27 ` [PATCH 01/11] clk: samsung: exynos3250: do not define number of clocks in bindings Krzysztof Kozlowski
2023-08-10 11:06 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 02/11] clk: samsung: exynos4: " Krzysztof Kozlowski
2023-08-10 11:19 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 03/11] clk: samsung: exynos5250: " Krzysztof Kozlowski
2023-08-10 11:22 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 04/11] clk: samsung: exynos5260: " Krzysztof Kozlowski
2023-08-10 11:26 ` Alim Akhtar [this message]
2023-08-08 8:27 ` [PATCH 05/11] clk: samsung: exynos5410: " Krzysztof Kozlowski
2023-08-10 11:27 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 06/11] clk: samsung: exynos5420: " Krzysztof Kozlowski
2023-08-10 11:27 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 07/11] clk: samsung: exynos5433: " Krzysztof Kozlowski
2023-08-10 11:32 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 08/11] clk: samsung: exynos7885: " Krzysztof Kozlowski
2023-08-10 11:34 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 09/11] clk: samsung: exynos850: " Krzysztof Kozlowski
2023-08-08 17:15 ` Sam Protsenko
2023-08-10 11:36 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 10/11] clk: samsung: exynoautov9: " Krzysztof Kozlowski
2023-08-10 11:37 ` Alim Akhtar
2023-08-08 8:27 ` [PATCH 11/11] dt-bindings: clock: samsung: remove define with number of clocks Krzysztof Kozlowski
2023-08-08 10:53 ` Conor Dooley
2023-08-08 10:56 ` Krzysztof Kozlowski
2023-08-08 17:17 ` Sam Protsenko
2023-08-10 11:39 ` Alim Akhtar
2023-08-10 13:38 ` [PATCH 00/11] clk: samsung: remove number of clocks from bindings Chanwoo Choi
2023-08-15 5:52 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='004701d9cb7d$75ee1cb0$61ca5610$@samsung.com' \
--to=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@kernel.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).