From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kukjin Kim <kgene.kim@samsung.com>
Subject: RE: [PATCH v2 0/2] ARM: Samsung: Add basic device tree support for
 Exynos4 boards
Date: Wed, 02 Nov 2011 21:45:06 +0900
Message-ID: <005a01cc995d$3fe56bf0$bfb043d0$%kim@samsung.com>
References: <1320109613-2811-1-git-send-email-thomas.abraham@linaro.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Return-path: <linux-samsung-soc-owner@vger.kernel.org>
In-reply-to: <1320109613-2811-1-git-send-email-thomas.abraham@linaro.org>
Content-language: ko
Sender: linux-samsung-soc-owner@vger.kernel.org
To: 'Thomas Abraham' <thomas.abraham@linaro.org>, devicetree-discuss@lists.ozlabs.org, linux-samsung-soc@vger.kernel.org
Cc: grant.likely@secretlab.ca, rob.herring@calxeda.com, arnd@arndb.de, linux-arm-kernel@lists.infradead.org
List-Id: devicetree@vger.kernel.org

Thomas Abraham wrote:
> 
> Changes since v1:
> - Removed unique per-controller compatible string value from gpio
controller
> nodes
>   to align with the updated device tree support for exynos4 gpio
controller.
> - Removed the interrupt combiner controller node.
> 
> This patchset adds a new basic device tree enabled machine/board file
which is
> based on the Samsung's Exynos4 family of SoC's. Also included in this
patchset
> is the
> dts file for Exynos4210 SoC, Samsung's SMDKV310 board and Insignal's
Origen
> board.
> 
> The Exynos4210 dts file includes support for IRQ, GPIO, WDT, RTC, UART,
SDHCI,
> Keypad,
> DMA and I2C controllers. As device tree coverage for Exynos4210 increases,
> additional
> device nodes to represent the controllers should be added.
> 
> The device tree enabled machine file enables boot on two boards based on
the
> Exynos4210 SoC. This provides a starting point to add additional device
tree
> support
> on these boards, migrate other existing Exynos4 based boards to use device
tree
> and enable device tree based boot on new upcoming boards.
> 
> This patchset has been tested on the following tree:
> git://git.linaro.org/git/people/arnd/arm-soc.git  branch: for-next
> 
> Thomas Abraham (2):
>   ARM: Samsung: Add Exynos4 device tree enabled board file
>   ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen
board
> 
>  .../devicetree/bindings/arm/insignal-boards.txt    |    8 +
>  .../devicetree/bindings/arm/samsung-boards.txt     |    8 +
>  arch/arm/boot/dts/exynos4210-origen.dts            |  137 +++++++
>  arch/arm/boot/dts/exynos4210-smdkv310.dts          |  182 +++++++++
>  arch/arm/boot/dts/exynos4210.dtsi                  |  397
> ++++++++++++++++++++
>  arch/arm/mach-exynos4/Kconfig                      |   14 +
>  arch/arm/mach-exynos4/Makefile                     |    2 +
>  arch/arm/mach-exynos4/mach-exynos4-dt.c            |   85 +++++
>  8 files changed, 833 insertions(+), 0 deletions(-)
>  create mode 100644
Documentation/devicetree/bindings/arm/insignal-boards.txt
>  create mode 100644
Documentation/devicetree/bindings/arm/samsung-boards.txt
>  create mode 100644 arch/arm/boot/dts/exynos4210-origen.dts
>  create mode 100644 arch/arm/boot/dts/exynos4210-smdkv310.dts
>  create mode 100644 arch/arm/boot/dts/exynos4210.dtsi
>  create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c

OK. replaced with this in next-samsung-dt branch.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.