* [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware @ 2023-01-04 16:29 Wadim Egorov 2023-01-04 16:29 ` [PATCH v4 2/2] arm64: dts: ti: Add support for phyBOARD-Electra-AM642 Wadim Egorov 2023-01-17 13:35 ` [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware Vignesh Raghavendra 0 siblings, 2 replies; 4+ messages in thread From: Wadim Egorov @ 2023-01-04 16:29 UTC (permalink / raw) To: linux-kernel, devicetree, linux-arm-kernel, upstream Cc: krzysztof.kozlowski+dt, robh+dt, kristo, vigneshr, nm Add devicetree bindings for AM64x based phyCORE-AM64 SoM and phyBOARD-Electra RDK. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- v4: No changes v3: No changes v2: - Add Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/arm/ti/k3.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 203faab80142..c55e3fdb7b33 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -38,6 +38,12 @@ properties: - ti,am642-sk - const: ti,am642 + - description: K3 AM642 SoC PHYTEC phyBOARD-Electra + items: + - const: phytec,am642-phyboard-electra-rdk + - const: phytec,am64-phycore-som + - const: ti,am642 + - description: K3 AM654 SoC items: - enum: -- 2.34.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v4 2/2] arm64: dts: ti: Add support for phyBOARD-Electra-AM642 2023-01-04 16:29 [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware Wadim Egorov @ 2023-01-04 16:29 ` Wadim Egorov 2023-01-16 11:20 ` Ravi Gunasekaran 2023-01-17 13:35 ` [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware Vignesh Raghavendra 1 sibling, 1 reply; 4+ messages in thread From: Wadim Egorov @ 2023-01-04 16:29 UTC (permalink / raw) To: linux-kernel, devicetree, linux-arm-kernel, upstream Cc: krzysztof.kozlowski+dt, robh+dt, kristo, vigneshr, nm Add basic support for phyCORE-AM64x SoM & phyBOARD-Electra-AM642 CB. The phyCORE-AM64x [1] is a SoM (System on Module) featuring TI's AM64x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM64x family. A development Kit, called phyBOARD-Electra [2] is used as a carrier board reference design around the AM64x SoM. Supported features: * Debug UART * Heartbeat LED * GPIO buttons & LEDs * SPI NOR flash * eMMC * CAN * Ethernet * Micro SD card * I2C EEPROM * I2C RTC * I2C LED Dimmer * USB For more details, see: [1] Product page SoM: https://www.phytec.com/product/phycore-am64x [2] Product page CB: https://www.phytec.com/product/phyboard-am64x Signed-off-by: Wadim Egorov <w.egorov@phytec.de> --- v4: - Do not override led pinmux in carrier board dts file, extend it - Do not mark tscadc0 and mcu_gpio0 nodes as reserved - Drop note about SPI TPM chip support from commit message v3: - Fix regulator name s/vcc-5v0-som/regulator-vcc-5v0-som - Drop nodes currently without YAML schemes and cause dtbs_check errors: - pmic@61 / ti,lp8733 - rtc@52 / trickle-resistor-ohms - leds@62 / nxp,pca9533 - main_spi0 + tpm@1 / infineon,slb9670 v2: - Update commit message - Add links to product pages for SoM & CB - Drop "fixed" from regulator node names - Use generic node names for pmic, tpm, leds & keys - Update compatible of som.dtsi - Remove not needed node labels for pmic, tpm - Remove not needed R5 core mailbox & reserved memory definitions This is use case specific and should not be defined in the som.dtsi - Provide aliases for used devices by SoM & CB - Fixed led definition: Provide proper default-trigger, function & color - Renamed rtc label to i2c_som_rtc --- arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am64-phycore-som.dtsi | 231 +++++++++++++++ .../dts/ti/k3-am642-phyboard-electra-rdk.dts | 277 ++++++++++++++++++ 3 files changed, 509 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index cf7c509538a4..0f8aa8725673 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi new file mode 100644 index 000000000000..8dfb6301b17d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com + * Author: Matt McKee <mmckee@phytec.com> + * + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phycore-am64x + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-AM64x"; + compatible = "phytec,am64-phycore-som", "ti,am642"; + + aliases { + ethernet0 = &cpsw_port1; + mmc0 = &sdhci0; + rtc0 = &i2c_som_rtc; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + }; + + vcc_5v0_som: regulator-vcc-5v0-som { + /* VIN / VCC_5V0_SOM */ + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0_SOM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + cpsw_mdio_pins_default: cpsw-mdio-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ + AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ + AM64X_IOPAD(0x0100, PIN_OUTPUT, 7) /* (V7) PRG1_PRU0_GPO18.GPIO0_63 */ + >; + }; + + cpsw_rgmii1_pins_default: cpsw-rgmii1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ + AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ + AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ + AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ + AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ + AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ + AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ + AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ + AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ + AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ + AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ + AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ + AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* (V12) PRG1_PRU1_GPO19.GPIO0_84 */ + >; + }; + + eeprom_wp_pins_default: eeprom-wp-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0208, PIN_OUTPUT, 7) /* (D12) SPI0_CS0.GPIO1_42 */ + >; + }; + + leds_pins_default: leds-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* (L18) OSPI0_CSn1.GPIO0_12 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */ + >; + }; + + ospi0_pins_default: ospi0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ + AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_rgmii1_pins_default>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_mdio_pins_default>; + + cpsw3g_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&main_gpio0>; + interrupts = <84 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c32"; + pinctrl-names = "default"; + pinctrl-0 = <&eeprom_wp_pins_default>; + pagesize = <32>; + reg = <0x50>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + }; +}; + +&sdhci0 { + bus-width = <8>; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; + keep-power-in-suspend; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts new file mode 100644 index 000000000000..8d3114d14a8b --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com + * Author: Matt McKee <mmckee@phytec.com> + * + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phyboard-am64x + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> +#include "k3-am642.dtsi" +#include "k3-am64-phycore-som.dtsi" + +/ { + compatible = "phytec,am642-phyboard-electra-rdk", + "phytec,am64-phycore-som", "ti,am642"; + model = "PHYTEC phyBOARD-Electra-AM64x RDK"; + + aliases { + mmc1 = &sdhci1; + serial2 = &main_uart0; + serial3 = &main_uart1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + can_tc1: can-phy0 { + compatible = "ti,tcan1042"; + pinctrl-names = "default"; + pinctrl-0 = <&can_tc1_pins_default>; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; + }; + + can_tc2: can-phy1 { + compatible = "ti,tcan1042"; + pinctrl-names = "default"; + pinctrl-0 = <&can_tc2_pins_default>; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + + key-home { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + key-menu { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default &user_leds_pins_default>; + + led-1 { + color = <LED_COLOR_ID_RED>; + gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + function = LED_FUNCTION_DISK; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + function = LED_FUNCTION_DISK; + }; + }; + + vcc_3v3_mmc: regulator-sd { + /* TPS22963C */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&main_pmx0 { + can_tc1_pins_default: can-tc1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (P16) GPMC0_ADVn_ALE.GPIO0_32 */ + >; + }; + + can_tc2_pins_default: can-tc2-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0090, PIN_OUTPUT, 7) /* (P17) GPMC0_BE0n_CLE.GPIO0_35 */ + >; + }; + + gpio_keys_pins_default: gpio-keys-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */ + AM64X_IOPAD(0x0054, PIN_INPUT, 7) /* (V20) GPMC0_AD6.GPIO0_21 */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */ + AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* (B19) I2C1_SDA */ + >; + }; + + main_mcan0_pins_default: main-mcan0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ + AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ + >; + }; + + main_mcan1_pins_default: main-mcan1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ + AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ + AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ + AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ + AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ + AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ + AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ + AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ + AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ + >; + }; + + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ + AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024C, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_usb0_pins_default: main-usb0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ + >; + }; + + pcie_usb_sel_pins_default: pcie-usb-sel-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ + >; + }; + + pcie0_pins_default: pcie0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ + >; + }; + + user_leds_pins_default: user-leds-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */ + AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */ + >; + }; +}; + +&main_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x51>; + }; +}; + +&main_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&can_tc1>; +}; + +&main_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan1_pins_default>; + phys = <&can_tc2>; +}; + +&main_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&main_uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + uart-has-rtscts; +}; + +&sdhci1 { + vmmc-supply = <&vcc_3v3_mmc>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + bus-width = <4>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; +}; + +&serdes0 { + serdes0_pcie_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_USB>; +}; + +&usbss0 { + ti,vbus-divider; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usb0_pins_default>; + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes0_pcie_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; -- 2.34.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v4 2/2] arm64: dts: ti: Add support for phyBOARD-Electra-AM642 2023-01-04 16:29 ` [PATCH v4 2/2] arm64: dts: ti: Add support for phyBOARD-Electra-AM642 Wadim Egorov @ 2023-01-16 11:20 ` Ravi Gunasekaran 0 siblings, 0 replies; 4+ messages in thread From: Ravi Gunasekaran @ 2023-01-16 11:20 UTC (permalink / raw) To: Wadim Egorov, linux-kernel, devicetree, linux-arm-kernel, upstream Cc: krzysztof.kozlowski+dt, robh+dt, kristo, vigneshr, nm On 04/01/23 9:59 pm, Wadim Egorov wrote: > Add basic support for phyCORE-AM64x SoM & phyBOARD-Electra-AM642 CB. > > The phyCORE-AM64x [1] is a SoM (System on Module) featuring TI's AM64x SoC. > It can be used in combination with different carrier boards. > This module can come with different sizes and models for > DDR, eMMC, SPI NOR Flash and various SoCs from the AM64x family. > > A development Kit, called phyBOARD-Electra [2] is used as a carrier board > reference design around the AM64x SoM. > > Supported features: > * Debug UART > * Heartbeat LED > * GPIO buttons & LEDs > * SPI NOR flash > * eMMC > * CAN > * Ethernet > * Micro SD card > * I2C EEPROM > * I2C RTC > * I2C LED Dimmer > * USB > > For more details, see: > > [1] Product page SoM: https://www.phytec.com/product/phycore-am64x > [2] Product page CB: https://www.phytec.com/product/phyboard-am64x > > Signed-off-by: Wadim Egorov <w.egorov@phytec.de> > --- > v4: > - Do not override led pinmux in carrier board dts file, extend it > - Do not mark tscadc0 and mcu_gpio0 nodes as reserved > - Drop note about SPI TPM chip support from commit message > > v3: > - Fix regulator name s/vcc-5v0-som/regulator-vcc-5v0-som > - Drop nodes currently without YAML schemes and cause dtbs_check errors: > - pmic@61 / ti,lp8733 > - rtc@52 / trickle-resistor-ohms > - leds@62 / nxp,pca9533 > - main_spi0 + tpm@1 / infineon,slb9670 > v2: > - Update commit message > - Add links to product pages for SoM & CB > - Drop "fixed" from regulator node names > - Use generic node names for pmic, tpm, leds & keys > - Update compatible of som.dtsi > - Remove not needed node labels for pmic, tpm > - Remove not needed R5 core mailbox & reserved memory definitions > This is use case specific and should not be defined in the som.dtsi > - Provide aliases for used devices by SoM & CB > - Fixed led definition: Provide proper default-trigger, function & color > - Renamed rtc label to i2c_som_rtc > --- > arch/arm64/boot/dts/ti/Makefile | 1 + > .../boot/dts/ti/k3-am64-phycore-som.dtsi | 231 +++++++++++++++ > .../dts/ti/k3-am642-phyboard-electra-rdk.dts | 277 ++++++++++++++++++ > 3 files changed, 509 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts > > diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile > index cf7c509538a4..0f8aa8725673 100644 > --- a/arch/arm64/boot/dts/ti/Makefile > +++ b/arch/arm64/boot/dts/ti/Makefile > @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb > dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb > > dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb > +dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb > > dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb > diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi > new file mode 100644 > index 000000000000..8dfb6301b17d > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi > @@ -0,0 +1,231 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com > + * Author: Matt McKee <mmckee@phytec.com> > + * > + * Copyright (C) 2022 PHYTEC Messtechnik GmbH > + * Author: Wadim Egorov <w.egorov@phytec.de> > + * > + * Product homepage: > + * https://www.phytec.com/product/phycore-am64x > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/net/ti-dp83867.h> > + > +/ { > + model = "PHYTEC phyCORE-AM64x"; > + compatible = "phytec,am64-phycore-som", "ti,am642"; > + > + aliases { > + ethernet0 = &cpsw_port1; > + mmc0 = &sdhci0; > + rtc0 = &i2c_som_rtc; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + secure_ddr: optee@9e800000 { > + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ > + alignment = <0x1000>; > + no-map; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&leds_pins_default>; > + > + led-0 { > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + function = LED_FUNCTION_HEARTBEAT; > + }; > + }; > + > + vcc_5v0_som: regulator-vcc-5v0-som { > + /* VIN / VCC_5V0_SOM */ > + compatible = "regulator-fixed"; > + regulator-name = "VCC_5V0_SOM"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&main_pmx0 { > + cpsw_mdio_pins_default: cpsw-mdio-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ > + AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ > + AM64X_IOPAD(0x0100, PIN_OUTPUT, 7) /* (V7) PRG1_PRU0_GPO18.GPIO0_63 */ > + >; > + }; > + > + cpsw_rgmii1_pins_default: cpsw-rgmii1-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ > + AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ > + AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ > + AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ > + AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ > + AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ > + AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ > + AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ > + AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ > + AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ > + AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ > + AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ > + AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* (V12) PRG1_PRU1_GPO19.GPIO0_84 */ > + >; > + }; > + > + eeprom_wp_pins_default: eeprom-wp-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0208, PIN_OUTPUT, 7) /* (D12) SPI0_CS0.GPIO1_42 */ > + >; > + }; > + > + leds_pins_default: leds-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* (L18) OSPI0_CSn1.GPIO0_12 */ > + >; > + }; > + > + main_i2c0_pins_default: main-i2c0-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */ > + AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */ > + >; > + }; > + > + ospi0_pins_default: ospi0-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ > + AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ > + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ > + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ > + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ > + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ > + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ > + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ > + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ > + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ > + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ > + >; > + }; > +}; > + > +&cpsw3g { > + pinctrl-names = "default"; > + pinctrl-0 = <&cpsw_rgmii1_pins_default>; > +}; > + > +&cpsw3g_mdio { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&cpsw_mdio_pins_default>; > + > + cpsw3g_phy1: ethernet-phy@1 { > + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + interrupt-parent = <&main_gpio0>; > + interrupts = <84 IRQ_TYPE_EDGE_FALLING>; > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; > + reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>; > + reset-assert-us = <1000>; > + reset-deassert-us = <1000>; > + }; > +}; > + > +&cpsw_port1 { > + phy-mode = "rgmii-rxid"; > + phy-handle = <&cpsw3g_phy1>; > +}; > + > +&cpsw_port2 { > + status = "disabled"; > +}; > + > +&mailbox0_cluster2 { > + status = "disabled"; > +}; > + > +&mailbox0_cluster3 { > + status = "disabled"; > +}; > + > +&mailbox0_cluster4 { > + status = "disabled"; > +}; > + > +&mailbox0_cluster5 { > + status = "disabled"; > +}; > + > +&mailbox0_cluster6 { > + status = "disabled"; > +}; > + > +&mailbox0_cluster7 { > + status = "disabled"; > +}; > + > +&main_i2c0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_i2c0_pins_default>; > + clock-frequency = <400000>; > + > + eeprom@50 { > + compatible = "atmel,24c32"; > + pinctrl-names = "default"; > + pinctrl-0 = <&eeprom_wp_pins_default>; > + pagesize = <32>; > + reg = <0x50>; > + }; > + > + i2c_som_rtc: rtc@52 { > + compatible = "microcrystal,rv3028"; > + reg = <0x52>; > + }; > +}; > + > +&ospi0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&ospi0_pins_default>; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-tx-bus-width = <8>; > + spi-rx-bus-width = <8>; > + spi-max-frequency = <25000000>; > + cdns,tshsl-ns = <60>; > + cdns,tsd2d-ns = <60>; > + cdns,tchsh-ns = <60>; > + cdns,tslch-ns = <60>; > + cdns,read-delay = <0>; > + }; > +}; > + > +&sdhci0 { > + bus-width = <8>; > + non-removable; > + ti,driver-strength-ohm = <50>; > + disable-wp; > + keep-power-in-suspend; > +}; > diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts > new file mode 100644 > index 000000000000..8d3114d14a8b > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts > @@ -0,0 +1,277 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com > + * Author: Matt McKee <mmckee@phytec.com> > + * > + * Copyright (C) 2022 PHYTEC Messtechnik GmbH > + * Author: Wadim Egorov <w.egorov@phytec.de> > + * > + * Product homepage: > + * https://www.phytec.com/product/phyboard-am64x > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/mux/ti-serdes.h> > +#include <dt-bindings/phy/phy.h> > +#include "k3-am642.dtsi" > +#include "k3-am64-phycore-som.dtsi" > + > +/ { > + compatible = "phytec,am642-phyboard-electra-rdk", > + "phytec,am64-phycore-som", "ti,am642"; > + model = "PHYTEC phyBOARD-Electra-AM64x RDK"; > + > + aliases { > + mmc1 = &sdhci1; > + serial2 = &main_uart0; > + serial3 = &main_uart1; > + }; > + > + chosen { > + stdout-path = &main_uart0; > + }; > + > + can_tc1: can-phy0 { > + compatible = "ti,tcan1042"; > + pinctrl-names = "default"; > + pinctrl-0 = <&can_tc1_pins_default>; > + #phy-cells = <0>; > + max-bitrate = <5000000>; > + standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; > + }; > + > + can_tc2: can-phy1 { > + compatible = "ti,tcan1042"; > + pinctrl-names = "default"; > + pinctrl-0 = <&can_tc2_pins_default>; > + #phy-cells = <0>; > + max-bitrate = <5000000>; > + standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; > + }; > + > + keys { > + compatible = "gpio-keys"; > + autorepeat; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_pins_default>; > + > + key-home { > + label = "home"; > + linux,code = <KEY_HOME>; > + gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>; > + }; > + > + key-menu { > + label = "menu"; > + linux,code = <KEY_MENU>; > + gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&leds_pins_default &user_leds_pins_default>; > + > + led-1 { > + color = <LED_COLOR_ID_RED>; > + gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc0"; > + function = LED_FUNCTION_DISK; > + }; > + > + led-2 { > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&main_gpio0 16 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc1"; > + function = LED_FUNCTION_DISK; > + }; > + }; > + > + vcc_3v3_mmc: regulator-sd { > + /* TPS22963C */ > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3_MMC"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > +}; > + > +&main_pmx0 { > + can_tc1_pins_default: can-tc1-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (P16) GPMC0_ADVn_ALE.GPIO0_32 */ > + >; > + }; > + > + can_tc2_pins_default: can-tc2-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0090, PIN_OUTPUT, 7) /* (P17) GPMC0_BE0n_CLE.GPIO0_35 */ > + >; > + }; > + > + gpio_keys_pins_default: gpio-keys-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */ > + AM64X_IOPAD(0x0054, PIN_INPUT, 7) /* (V20) GPMC0_AD6.GPIO0_21 */ > + >; > + }; > + > + main_i2c1_pins_default: main-i2c1-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */ > + AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* (B19) I2C1_SDA */ > + >; > + }; > + > + main_mcan0_pins_default: main-mcan0-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ > + AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ > + >; > + }; > + > + main_mcan1_pins_default: main-mcan1-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ > + AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ > + >; > + }; > + > + main_mmc1_pins_default: main-mmc1-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ > + AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ > + AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ > + AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ > + AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ > + AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ > + AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ > + AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ > + >; > + }; > + > + main_uart0_pins_default: main-uart0-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ > + AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ > + >; > + }; > + > + main_uart1_pins_default: main-uart1-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ > + AM64X_IOPAD(0x024C, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ > + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ > + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ > + >; > + }; > + > + main_usb0_pins_default: main-usb0-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ > + >; > + }; > + > + pcie_usb_sel_pins_default: pcie-usb-sel-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ > + >; > + }; > + > + pcie0_pins_default: pcie0-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ > + >; > + }; > + > + user_leds_pins_default: user-leds-pins-default { > + pinctrl-single,pins = < > + AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */ > + AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */ > + >; > + }; > +}; > + > +&main_i2c1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_i2c1_pins_default>; > + clock-frequency = <400000>; > + > + eeprom@51 { > + compatible = "atmel,24c02"; > + pagesize = <16>; > + reg = <0x51>; > + }; > +}; > + > +&main_mcan0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_mcan0_pins_default>; > + phys = <&can_tc1>; > +}; > + > +&main_mcan1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_mcan1_pins_default>; > + phys = <&can_tc2>; > +}; > + > +&main_uart0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_uart0_pins_default>; > +}; > + > +&main_uart1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_uart1_pins_default>; > + uart-has-rtscts; > +}; > + > +&sdhci1 { > + vmmc-supply = <&vcc_3v3_mmc>; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_mmc1_pins_default>; > + bus-width = <4>; > + ti,driver-strength-ohm = <50>; > + disable-wp; > + no-1-8-v; > +}; > + > +&serdes0 { > + serdes0_pcie_usb_link: phy@0 { > + reg = <0>; > + cdns,num-lanes = <1>; > + #phy-cells = <0>; > + cdns,phy-type = <PHY_TYPE_USB3>; > + resets = <&serdes_wiz0 1>; > + }; > +}; > + > +&serdes_ln_ctrl { > + idle-states = <AM64_SERDES0_LANE0_USB>; > +}; > + > +&usbss0 { > + ti,vbus-divider; > +}; > + > +&usb0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&main_usb0_pins_default>; > + dr_mode = "host"; > + maximum-speed = "super-speed"; > + phys = <&serdes0_pcie_usb_link>; > + phy-names = "cdns3,usb3-phy"; > +}; Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> -- Regards, Ravi ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware 2023-01-04 16:29 [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware Wadim Egorov 2023-01-04 16:29 ` [PATCH v4 2/2] arm64: dts: ti: Add support for phyBOARD-Electra-AM642 Wadim Egorov @ 2023-01-17 13:35 ` Vignesh Raghavendra 1 sibling, 0 replies; 4+ messages in thread From: Vignesh Raghavendra @ 2023-01-17 13:35 UTC (permalink / raw) To: devicetree, Wadim Egorov, linux-kernel, upstream, linux-arm-kernel Cc: Vignesh Raghavendra, kristo, krzysztof.kozlowski+dt, nm, robh+dt Hi Wadim Egorov, On Wed, 4 Jan 2023 17:29:26 +0100, Wadim Egorov wrote: > Add devicetree bindings for AM64x based phyCORE-AM64 SoM > and phyBOARD-Electra RDK. > > I have applied the following to branch ti-k3-next on [1]. Thank you! [1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware commit: 86fc17d8495e7c221283267519561ea04a44f7b4 [2/2] arm64: dts: ti: Add support for phyBOARD-Electra-AM642 commit: c48ac0efe6d71050f635b40116ba714961ad9d4c All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git -- Vignesh ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-01-17 13:36 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-01-04 16:29 [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware Wadim Egorov 2023-01-04 16:29 ` [PATCH v4 2/2] arm64: dts: ti: Add support for phyBOARD-Electra-AM642 Wadim Egorov 2023-01-16 11:20 ` Ravi Gunasekaran 2023-01-17 13:35 ` [PATCH v4 1/2] dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware Vignesh Raghavendra
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).