From: Kukjin Kim <kgene.kim@samsung.com>
To: 'Tomasz Figa' <tomasz.figa@gmail.com>, linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org,
broonie@opensource.wolfsonmicro.com, kwangwoo.lee@gmail.com,
jacmet@sunsite.dk, augulis.darius@gmail.com,
mcuelenaere@gmail.com, linux@arm.linux.org.uk
Subject: RE: [PATCH 0/6] Initial Device Tree support for S3C64xx
Date: Fri, 25 Jan 2013 11:25:12 -0800 [thread overview]
Message-ID: <017001cdfb31$b44bd3d0$1ce37b70$@samsung.com> (raw)
In-Reply-To: <1689405.9Ne2g34LZt@flatron>
Tomasz Figa wrote:
>
> On Sunday 13 of January 2013 02:10:52 Tomasz Figa wrote:
> > This series is adds Device Tree support for Samsung S3C64xx SoC series.
> >
> > It fixes several problems preventing from booting an S3C64xx-based
> > system using Device Tree, adds all the infrastructure for Device
> > Tree-based board support, including mach-s3c64xx-dt and dts include
> > files for S3C64xx SoCs, and (very) basic device tree source for
> > FriendlyARM Mini6410 board.
> >
> > Current support is very limited and allows only basic bootup with UART
> > and SDHCI, but should be fine as a start and will be extended in
> > future, hopefully with help of S3C64xx board maintainers.
> >
> > Tomasz Figa (6):
> > ARM: common: vic: Parse interrupt and resume masks from device tree
> > ARM: common: vic: Fix invalid first IRQ number in OF-based
> > registration
> > ARM: s3c64xx: Add support for OF-based VIC initialization
> > ARM: s3c64xx: Add board file for boot using Device Tree
> > ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
> > ARM: dts: Add dts file for S3C6410-based Mini6410 board
> >
> > Documentation/devicetree/bindings/arm/vic.txt | 6 ++
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/s3c6400.dtsi | 33 +++++++++
> > arch/arm/boot/dts/s3c6410-mini6410.dts | 50 ++++++++++++++
> > arch/arm/boot/dts/s3c6410.dtsi | 33 +++++++++
> > arch/arm/boot/dts/s3c64xx.dtsi | 97
> > +++++++++++++++++++++++++++ arch/arm/common/vic.c
> > | 9 ++-
> > arch/arm/mach-s3c64xx/Kconfig | 13 ++++
> > arch/arm/mach-s3c64xx/Makefile | 1 +
> > arch/arm/mach-s3c64xx/common.c | 16 +++++
> > arch/arm/mach-s3c64xx/common.h | 4 ++
> > arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c | 84
> > +++++++++++++++++++++++ 12 files changed, 345 insertions(+), 2
> > deletions(-)
> > create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
> > create mode 100644 arch/arm/boot/dts/s3c6410-mini6410.dts
> > create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
> > create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
> > create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
>
> Any other comments on this series?
>
Looks good to me. But would be better if the vic changes could get ack ;-)
Thanks.
- Kukjin
prev parent reply other threads:[~2013-01-25 19:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-13 1:10 [PATCH 0/6] Initial Device Tree support for S3C64xx Tomasz Figa
2013-01-13 1:10 ` [PATCH 1/6] ARM: common: vic: Parse interrupt and resume masks from device tree Tomasz Figa
2013-01-14 1:08 ` Rob Herring
2013-01-14 10:44 ` Tomasz Figa
2013-01-13 1:10 ` [PATCH 2/6] ARM: common: vic: Fix invalid first IRQ number in OF-based registration Tomasz Figa
2013-01-13 1:10 ` [PATCH 3/6] ARM: s3c64xx: Add support for OF-based VIC initialization Tomasz Figa
2013-01-13 1:10 ` [PATCH 4/6] ARM: s3c64xx: Add board file for boot using Device Tree Tomasz Figa
2013-01-13 1:10 ` [PATCH 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs Tomasz Figa
2013-01-14 14:48 ` Mark Rutland
2013-01-14 15:05 ` Lorenzo Pieralisi
2013-01-16 10:59 ` Dave Martin
2013-01-25 19:08 ` Tomasz Figa
2013-01-25 19:15 ` Kukjin Kim
2013-01-28 9:02 ` Mark Rutland
2013-01-28 13:04 ` Dave Martin
2013-01-13 1:10 ` [PATCH 6/6] ARM: dts: Add dts file for S3C6410-based Mini6410 board Tomasz Figa
2013-01-25 19:09 ` [PATCH 0/6] Initial Device Tree support for S3C64xx Tomasz Figa
2013-01-25 19:25 ` Kukjin Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='017001cdfb31$b44bd3d0$1ce37b70$@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=augulis.darius@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=jacmet@sunsite.dk \
--cc=kwangwoo.lee@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mcuelenaere@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).