Re: [PATCH v2 3/9] arm64: allwinner: dts: h6: add USB2-related device nodes

[Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>]

于 2018年7月7日 GMT+08:00 上午11:31:39, Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> 写到:
>On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org> wrote:
>> Allwinner H6 has two USB2 ports, one OTG and one host-only.
>>
>> Add device tree nodes related to them.
>>
>> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
>> ---
>>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 90
>++++++++++++++++++++
>>  1 file changed, 90 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> index c72da8cd9ef5..62fc0f5e10ba 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> @@ -174,6 +174,96 @@
>>                         status = "disabled";
>>                 };
>>
>> +               usb2otg: usb@5100000 {
>> +                       compatible = "allwinner,sun8i-a33-musb";
>> +                       reg = <0x05100000 0x0400>;
>> +                       clocks = <&ccu CLK_BUS_OTG>;
>> +                       resets = <&ccu RST_BUS_OTG>;
>> +                       interrupts = <GIC_SPI 23
>IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "mc";
>> +                       phys = <&usb2phy 0>;
>> +                       phy-names = "usb";
>> +                       extcon = <&usb2phy 0>;
>> +                       status = "disabled";
>> +               };
>> +
>> +               usb2phy: phy@5100400 {
>> +                       compatible = "allwinner,sun50i-h6-usb-phy";
>> +                       reg = <0x05100400 0x14>,
>> +                             <0x05101800 0x4>,
>> +                             <0x05311800 0x4>;
>> +                       reg-names = "phy_ctrl",
>> +                                   "pmu0",
>> +                                   "pmu3";
>> +                       clocks = <&ccu CLK_USB_PHY0>,
>> +                                <&ccu CLK_USB_PHY3>;
>> +                       clock-names = "usb0_phy",
>> +                                     "usb3_phy";
>> +                       resets = <&ccu RST_USB_PHY0>,
>> +                                <&ccu RST_USB_PHY3>;
>> +                       reset-names = "usb0_reset",
>> +                                     "usb3_reset";
>> +                       status = "disabled";
>> +                       #phy-cells = <1>;
>> +               };
>> +
>> +               ehci0: usb@5101000 {
>> +                       compatible = "allwinner,sun50i-h6-ehci",
>"generic-ehci";
>> +                       reg = <0x05101000 0x100>;
>> +                       interrupts = <GIC_SPI 24
>IRQ_TYPE_LEVEL_HIGH>;
>> +                       clocks = <&ccu CLK_BUS_OHCI0>,
>> +                                <&ccu CLK_BUS_EHCI0>,
>> +                                <&ccu CLK_USB_OHCI0>;
>> +                       resets = <&ccu RST_BUS_OHCI0>,
>> +                                <&ccu RST_BUS_EHCI0>;
>> +                       status = "disabled";
>> +               };
>> +
>> +               ohci0: usb@5101400 {
>> +                       compatible = "allwinner,sun50i-h6-ohci",
>"generic-ohci";
>> +                       reg = <0x05101400 0x100>;
>> +                       interrupts = <GIC_SPI 25
>IRQ_TYPE_LEVEL_HIGH>;
>> +                       clocks = <&ccu CLK_BUS_OHCI0>,
>> +                                <&ccu CLK_USB_OHCI0>;
>> +                       resets = <&ccu RST_BUS_OHCI0>;
>> +                       status = "disabled";
>> +               };
>> +
>> +               usb3phy: phy@5210000 {
>
>Maybe you should split this one out and put it in the USB 3.0 patch?

Sorry, -EREBASE.

>
>ChenYu
>
>> +                       compatible = "allwinner,sun50i-h6-usb3-phy";
>> +                       reg = <0x5210000 0x10000>;
>> +                       clocks = <&ccu CLK_USB_PHY1>;
>> +                       resets = <&ccu RST_USB_PHY1>;
>> +                       #phy-cells = <0>;
>> +                       status = "disabled";
>> +               };
>> +
>> +               ehci3: usb@5311000 {
>> +                       compatible = "allwinner,sun50i-h6-ehci",
>"generic-ehci";
>> +                       reg = <0x05311000 0x100>;
>> +                       interrupts = <GIC_SPI 28
>IRQ_TYPE_LEVEL_HIGH>;
>> +                       clocks = <&ccu CLK_BUS_OHCI3>,
>> +                                <&ccu CLK_BUS_EHCI3>,
>> +                                <&ccu CLK_USB_OHCI3>;
>> +                       resets = <&ccu RST_BUS_OHCI3>,
>> +                                <&ccu RST_BUS_EHCI3>;
>> +                       phys = <&usb2phy 3>;
>> +                       phy-names = "usb";
>> +                       status = "disabled";
>> +               };
>> +
>> +               ohci3: usb@5311400 {
>> +                       compatible = "allwinner,sun50i-h6-ohci",
>"generic-ohci";
>> +                       reg = <0x05311400 0x100>;
>> +                       interrupts = <GIC_SPI 29
>IRQ_TYPE_LEVEL_HIGH>;
>> +                       clocks = <&ccu CLK_BUS_OHCI3>,
>> +                                <&ccu CLK_USB_OHCI3>;
>> +                       resets = <&ccu RST_BUS_OHCI3>;
>> +                       phys = <&usb2phy 3>;
>> +                       phy-names = "usb";
>> +                       status = "disabled";
>> +               };
>> +
>>                 r_ccu: clock@7010000 {
>>                         compatible = "allwinner,sun50i-h6-r-ccu";
>>                         reg = <0x07010000 0x400>;
>> --
>> 2.17.1
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>> For more options, visit https://groups.google.com/d/optout.
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.