From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-sh@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>,
glaubitz@physik.fu-berlin.de, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
devicetree@vger.kernel.org
Subject: [RFC PATCH v3 26/35] arch/sh/boot/dts: SH7751R SoC Internal peripheral definition dtsi.
Date: Sat, 14 Oct 2023 23:54:01 +0900 [thread overview]
Message-ID: <01c234379a48f89df5150fa2b5eae867df08d858.1697199949.git.ysato@users.sourceforge.jp> (raw)
In-Reply-To: <cover.1697199949.git.ysato@users.sourceforge.jp>
Renesas SuperH SH7751R common definition.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/boot/dts/sh7751r.dtsi | 148 ++++++++++++++++++++++++++++++++++
1 file changed, 148 insertions(+)
create mode 100644 arch/sh/boot/dts/sh7751r.dtsi
diff --git a/arch/sh/boot/dts/sh7751r.dtsi b/arch/sh/boot/dts/sh7751r.dtsi
new file mode 100644
index 000000000000..66f71372baad
--- /dev/null
+++ b/arch/sh/boot/dts/sh7751r.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SH7751R SoC
+ */
+
+#include <dt-bindings/interrupt-controller/sh_intc.h>
+#include <dt-bindings/clock/sh7750.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "renesas,sh4", "renesas,sh";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&cpg SH7750_CPG_ICK>;
+ clock-names = "ick";
+ icache-size = <16384>;
+ icache-line-size = <32>;
+ dcache-size = <32768>;
+ dcache-line-size = <32>;
+ };
+ };
+
+ xtal: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xtal";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&shintc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cpg: clock-controller@ffc00000 {
+ #clock-cells = <1>;
+ #power-domain-cells = <0>;
+ compatible = "renesas,sh7751r-cpg", "renesas,sh7750-cpg";
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ reg = <0xffc00000 20>, <0xfe0a0000 16>;
+ reg-names = "FRQCR", "CLKSTP00";
+ };
+
+ shintc: interrupt-controller@ffd00000 {
+ compatible = "renesas,sh7751-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xffd00000 20>, <0xfe080000 128>;
+ reg-names = "ICR", "INTPRI00";
+ renesas,ipr-map = IPRDEF(0x240, IPRD, IPR_B12), /* IRL0 */
+ IPRDEF(0x2a0, IPRD, IPR_B8), /* IRL1 */
+ IPRDEF(0x300, IPRD, IPR_B4), /* IRL2 */
+ IPRDEF(0x360, IPRD, IPR_B0), /* IRL3 */
+ IPRDEF(0x400, IPRA, IPR_B12), /* TMU0 */
+ IPRDEF(0x420, IPRA, IPR_B8), /* TMU1 */
+ IPRDEF(0x440, IPRA, IPR_B4), /* TMU2 TNUI */
+ IPRDEF(0x460, IPRA, IPR_B4), /* TMU2 TICPI */
+ IPRDEF(0x480, IPRA, IPR_B0), /* RTC ATI */
+ IPRDEF(0x4a0, IPRA, IPR_B0), /* RTC PRI */
+ IPRDEF(0x4c0, IPRA, IPR_B0), /* RTC CUI */
+ IPRDEF(0x4e0, IPRB, IPR_B4), /* SCI ERI */
+ IPRDEF(0x500, IPRB, IPR_B4), /* SCI RXI */
+ IPRDEF(0x520, IPRB, IPR_B4), /* SCI TXI */
+ IPRDEF(0x540, IPRB, IPR_B4), /* SCI TEI */
+ IPRDEF(0x560, IPRB, IPR_B12), /* WDT */
+ IPRDEF(0x580, IPRB, IPR_B8), /* REF RCMI */
+ IPRDEF(0x5a0, IPRB, IPR_B4), /* REF ROVI */
+ IPRDEF(0x600, IPRC, IPR_B0), /* H-UDI */
+ IPRDEF(0x620, IPRC, IPR_B12), /* GPIO */
+ IPRDEF(0x640, IPRC, IPR_B8), /* DMAC DMTE0 */
+ IPRDEF(0x660, IPRC, IPR_B8), /* DMAC DMTE1 */
+ IPRDEF(0x680, IPRC, IPR_B8), /* DMAC DMTE2 */
+ IPRDEF(0x6a0, IPRC, IPR_B8), /* DMAC DMTE3 */
+ IPRDEF(0x6c0, IPRC, IPR_B8), /* DMAC DMAE */
+ IPRDEF(0x700, IPRC, IPR_B4), /* SCIF ERI */
+ IPRDEF(0x720, IPRC, IPR_B4), /* SCIF RXI */
+ IPRDEF(0x740, IPRC, IPR_B4), /* SCIF BRI */
+ IPRDEF(0x760, IPRC, IPR_B4), /* SCIF TXI */
+ IPRDEF(0x780, IPRC, IPR_B8), /* DMAC DMTE4 */
+ IPRDEF(0x7a0, IPRC, IPR_B8), /* DMAC DMTE5 */
+ IPRDEF(0x7c0, IPRC, IPR_B8), /* DMAC DMTE6 */
+ IPRDEF(0x7e0, IPRC, IPR_B8), /* DMAC DMTE7 */
+ IPRDEF(0xa00, INTPRI00, IPR_B0), /* PCIC PCISERR */
+ IPRDEF(0xa20, INTPRI00, IPR_B4), /* PCIC PCIDMA3 */
+ IPRDEF(0xa40, INTPRI00, IPR_B4), /* PCIC PCIDMA2 */
+ IPRDEF(0xa60, INTPRI00, IPR_B4), /* PCIC PCIDMA1 */
+ IPRDEF(0xa80, INTPRI00, IPR_B4), /* PCIC PCIDMA0 */
+ IPRDEF(0xaa0, INTPRI00, IPR_B4), /* PCIC PCIPWON */
+ IPRDEF(0xac0, INTPRI00, IPR_B4), /* PCIC PCIPWDWN */
+ IPRDEF(0xae0, INTPRI00, IPR_B4), /* PCIC PCIERR */
+ IPRDEF(0xb00, INTPRI00, IPR_B8), /* TMU3 */
+ IPRDEF(0xb80, INTPRI00, IPR_B12); /* TMU4 */
+ };
+
+ /* sci0 is rarely used, so it is not defined here. */
+ scif1: serial@ffe80000 {
+ compatible = "renesas,scif-sh7751", "renesas,scif";
+ reg = <0xffe80000 0x100>;
+ interrupts = <evt2irq(0x700) 0>,
+ <evt2irq(0x720) 0>,
+ <evt2irq(0x760) 0>,
+ <evt2irq(0x740) 0>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
+ clocks = <&cpg SH7750_CPG_SCIF_CLK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ };
+
+ /* Normally ch0 and ch1 are used, so we will define ch0 to ch2 here. */
+ tmu0: timer@ffd80000 {
+ compatible = "renesas,tmu-sh", "renesas,tmu";
+ reg = <0xffd80000 12>;
+ interrupts = <evt2irq(0x400) 0>,
+ <evt2irq(0x420) 0>,
+ <evt2irq(0x440) 0>,
+ <evt2irq(0x460) 0>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg SH7750_CPG_TMU012_CLK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ #renesas,channels = <3>;
+ };
+
+ pcic: pci@fe200000 {
+ compatible = "renesas,pci-sh7751";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ bus-range = <0 0>;
+ ranges = <0x02000000 0 0xfd000000 0xfd000000 0 0x01000000>,
+ <0x01000000 0 0x00000000 0xfe240000 0 0x00040000>;
+ reg = <0xfe200000 0x0400>,
+ <0x0c000000 0x04000000>,
+ <0xff800000 0x0030>;
+ };
+ };
+};
--
2.39.2
next prev parent reply other threads:[~2023-10-14 15:10 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1697199949.git.ysato@users.sourceforge.jp>
2023-10-14 14:53 ` [RFC PATCH v3 13/35] Documentation/devicetree/bindings/clock: Add renesas,sh7750-cpg binding document Yoshinori Sato
2023-10-18 13:41 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 15/35] Documentation/devicetree/bindings/interrupt-controller: Add renesas,sh7751-intc.yaml Yoshinori Sato
2023-10-19 11:29 ` Geert Uytterhoeven
2023-10-19 11:38 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 17/35] Documentation/devicetree/bindings/interrupt-controller: Add renesas,sh7751-irl-ext.yaml Yoshinori Sato
2023-10-14 14:54 ` [RFC PATCH v3 25/35] Documentation/devicetree/bindings/sh/cpus.yaml: Add SH CPU Yoshinori Sato
2023-10-18 14:27 ` Geert Uytterhoeven
2023-10-25 11:14 ` Yoshinori Sato
2023-10-25 11:33 ` D. Jeff Dionne
2023-10-25 12:04 ` Geert Uytterhoeven
2023-10-25 12:10 ` D. Jeff Dionne
2023-10-25 12:17 ` Geert Uytterhoeven
2023-10-25 12:34 ` D. Jeff Dionne
2023-10-25 12:07 ` Yoshinori Sato
2023-10-25 12:01 ` Geert Uytterhoeven
2023-10-14 14:54 ` Yoshinori Sato [this message]
2023-10-19 12:18 ` [RFC PATCH v3 26/35] arch/sh/boot/dts: SH7751R SoC Internal peripheral definition dtsi Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 27/35] Documentation/devicetree/bindings: vendor-prefix add IO DATA DEVICE Inc Yoshinori Sato
2023-10-18 18:43 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 28/35] Documentation/devicetree/bindings/ata: ata-generic.yaml add usl-5p and rts7751r2d Yoshinori Sato
2023-10-15 22:25 ` Damien Le Moal
2023-10-14 14:54 ` [RFC PATCH v3 29/35] Documentation/devicetree/bindings/soc/renesas/sh.yaml: Add SH7751 based target Yoshinori Sato
2023-10-18 18:48 ` Geert Uytterhoeven
2023-10-18 18:49 ` Geert Uytterhoeven
2023-10-18 19:44 ` Geert Uytterhoeven
2023-10-25 11:58 ` Yoshinori Sato
2023-10-25 12:05 ` Yoshinori Sato
2023-10-14 14:54 ` [RFC PATCH v3 30/35] arch/sh/boot/dts: RTS7751R2D Plus DeviceTree Yoshinori Sato
2023-10-19 12:13 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 31/35] arch/sh/boot/dts: LANDISK DeviceTree Yoshinori Sato
2023-10-19 12:14 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 32/35] arch/sh/boot/dts: USL-5P DeviceTree Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=01c234379a48f89df5150fa2b5eae867df08d858.1697199949.git.ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=glaubitz@physik.fu-berlin.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-sh@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).