Re: [PATCH v2 2/2] iio: adc: adding support for pac193x

[<Marius.Cristea@microchip.com>]

Hi Nuno Sá,

  Thanks for looking over the patch.

On Wed, 2023-10-25 at 16:38 +0200, Nuno Sá wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> On Wed, 2023-10-25 at 16:44 +0300,
> marius.cristea@microchip.com wrote:
> > From: Marius Cristea <marius.cristea@microchip.com>
> > 
> > This is the iio driver for Microchip
> > PAC193X series of Power Monitor with Accumulator chip family.
> > 
> > Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
> > ---
> 
> Hi Marius,
> 
> I'll be honest and I just looked at this for 5min. But I'm seeing
> things like
> shunt resistors, vsense, power, energy... This seems to me that it
> belong to
> drivers/hwmon. Any special reason for IIO?
> 

  Yes, this device is at the boundary between IIO and HWMON if you are
looking just at the "shunt resistors, vsense, power, energy". The
device also has ADC internaly that can measure voltages (up to 4
channels) and also currents (up to 4 channels). Current is measured as
voltage across the shunt_resistor.

  As I said before: I was thinking to start with a simple driver (this
one that is more apropiate to be a HWMON) and add more functionality
later (like data buffering that is quite important for example if
someone wants to profile power consumtion of the procesor itself, or a
pheriperic, or a battery, this kind of functionality was requested by
our customers).



> - Nuno Sá
> 
> 
//Marius