[PATCH v2 2/7] iio: magnetometer: yas530: Change range of data in volatile register

[Jakob Hauser <jahau@rocketmail.com>]

In function yas5xx_volatile_reg(), the range for measure data should end at
"YAS5XX_MEASURE_DATA + 7" instead of "+ 8" as we count from 0 to 7 here.

This change is of low importance as the "+ 8" register isn't called.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/iio/magnetometer/yamaha-yas530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index b58a9c51e9ff..2d71ae837bf5 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -527,7 +527,7 @@ static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg)
 {
 	return reg == YAS5XX_ACTUATE_INIT_COIL ||
 		reg == YAS5XX_MEASURE ||
-		(reg >= YAS5XX_MEASURE_DATA && reg <= YAS5XX_MEASURE_DATA + 8);
+		(reg >= YAS5XX_MEASURE_DATA && reg <= YAS5XX_MEASURE_DATA + 7);
 }
 
 /* TODO: enable regmap cache, using mark dirty and sync at runtime resume */
-- 
2.35.1