Re: [PATCH v3 3/4] arm64: dts: amlogic: add fbx8am board

[Neil Armstrong <neil.armstrong@linaro.org>]

On 13/02/2024 18:13, Marc Gonzalez wrote:
> From: Pierre-Hugues Husson <phhusson@freebox.fr>
> 
> The fbx8am boards are based on the Amlogic Meson G12A S905X2 SoC,
> and the SEI510 board design.
> 
> Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 462 ++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 462 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> new file mode 100644
> index 0000000000000..af211d8f39520
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> @@ -0,0 +1,462 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2024 Freebox SAS
> +
> +/*
> + * SEI codename: SEI530FB (based on SEI510)
> + * Freebox codename: fbx8am
> + * Commercial names: Freebox Pop, Player TV Free 4K
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12a.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> +	compatible = "freebox,fbx8am", "amlogic,g12a";
> +	model = "Freebox Player Pop";
> +	chassis-type = "embedded";
> +
> +	firmware {
> +		optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +	};
> +
> +	gpio-keys-polled {
> +		compatible = "gpio-keys-polled";
> +		poll-interval = <100>;
> +
> +		/* Physical user-accessible reset button near USB port */
> +		power-button {
> +			label = "Reset";
> +			linux,code = <BTN_MISC>;
> +			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	spdif_dit: audio-codec-2 {
> +		#sound-dai-cells = <0>;
> +		compatible = "linux,spdif-dit";
> +		status = "okay";
> +		sound-name-prefix = "DIT";
> +	};
> +
> +	aliases {
> +		serial0 = &uart_AO;
> +		ethernet0 = &ethmac;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	emmc_pwrseq: emmc-pwrseq {
> +		compatible = "mmc-pwrseq-emmc";
> +		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&hdmi_tx_tmds_out>;
> +			};
> +		};
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>;
> +	};
> +
> +	ao_5v: regulator-ao-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "AO_5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_in>;
> +		regulator-always-on;
> +	};
> +
> +	dc_in: regulator-dc-in {
> +		compatible = "regulator-fixed";
> +		regulator-name = "DC_IN";
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +		regulator-always-on;
> +	};
> +
> +	emmc_1v8: regulator-emmc-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "EMMC_1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	vddao_3v3: regulator-vddao-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&ao_5v>;
> +		regulator-always-on;
> +	};
> +
> +	vddao_3v3_t: regulator-vddao-3v3-t {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3_T";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vddao_3v3>;
> +		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
> +		enable-active-high;
> +	};
> +
> +	vddcpu: regulator-vddcpu {
> +		/*
> +		 * SY8120B1ABC DC/DC Regulator.
> +		 */
> +		compatible = "pwm-regulator";
> +
> +		regulator-name = "VDDCPU";
> +		regulator-min-microvolt = <721000>;
> +		regulator-max-microvolt = <1022000>;
> +
> +		pwm-supply = <&ao_5v>;
> +
> +		pwms = <&pwm_AO_cd 1 1250 0>;
> +		pwm-dutycycle-range = <100 0>;
> +
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	vddio_ao1v8: regulator-vddio-ao1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_AO1V8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vddao_3v3>;
> +		regulator-always-on;
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> +		post-power-on-delay-ms = <10>; /* required for 43752 */
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	wifi32k: wifi32k {
> +		compatible = "pwm-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> +	};
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "fbx8am";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT",
> +				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
> +				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> +				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
> +
> +		assigned-clocks = <&clkc CLKID_MPLL2>,
> +				  <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* spdif hdmi or toslink interface */
> +		dai-link-4 {
> +			sound-dai = <&spdifout_a>;
> +
> +			codec-0 {
> +			sound-dai = <&spdif_dit>;
> +			};
> +
> +			codec-1 {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> +			};
> +		};
> +
> +		/* spdif hdmi interface */
> +		dai-link-5 {
> +			sound-dai = <&spdifout_b>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-6 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&cecb_AO {
> +	pinctrl-0 = <&cec_ao_b_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +	hdmi-phandle = <&hdmi_tx>;
> +};
> +
> +&clkc_audio {
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&ethmac {
> +	status = "okay";
> +	phy-handle = <&internal_ephy>;
> +	phy-mode = "rmii";
> +};
> +
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
> +&spdifout_a {
> +	pinctrl-0 = <&spdif_out_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&spdifout_b {
> +	status = "okay";
> +};
> +
> +&hdmi_tx {
> +	status = "okay";
> +	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&ir {
> +	status = "okay";
> +	pinctrl-0 = <&remote_input_ao_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&pwm_AO_cd {
> +	pinctrl-0 = <&pwm_ao_d_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&xtal>;
> +	clock-names = "clkin1";
> +	status = "okay";
> +};
> +
> +&pwm_ef {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&xtal>;
> +	clock-names = "clkin0";
> +};
> +
> +&pdm {
> +	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
> +		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
> +		    <&pdm_dclk_z_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vddio_ao1v8>;
> +};
> +
> +/* SDIO */
> +&sd_emmc_a {
> +	status = "okay";
> +	pinctrl-0 = <&sdio_pins>;
> +	pinctrl-1 = <&sdio_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	sd-uhs-sdr50;
> +	max-frequency = <100000000>;
> +
> +	non-removable;
> +	disable-wp;
> +
> +	/* WiFi firmware requires power to be kept while in suspend */
> +	keep-power-in-suspend;
> +
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddio_ao1v8>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> +	status = "okay";
> +	pinctrl-0 = <&sdcard_c_pins>;
> +	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	max-frequency = <50000000>;
> +	disable-wp;
> +
> +	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddao_3v3>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> +	status = "okay";
> +	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
> +	pinctrl-1 = <&emmc_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	max-frequency = <200000000>;
> +	non-removable;
> +	disable-wp;
> +
> +	mmc-pwrseq = <&emmc_pwrseq>;
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&emmc_1v8>;
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};
> +
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +};
> +
> +&uart_AO {
> +	status = "okay";
> +	pinctrl-0 = <&uart_ao_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&usb {
> +	status = "okay";
> +	dr_mode = "host";
> +};

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>