From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: wei.fang@nxp.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com, Frank.Li@nxp.com,
shenwei.wang@nxp.com, xiaoning.wang@nxp.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] arm64: dts: imx8dxl: Disable hibernation mode of AR8031 for EQOS
Date: Thu, 15 Dec 2022 11:13:07 +0100 [thread overview]
Message-ID: <035e9326-d507-2930-d1ab-22b95af035f8@linaro.org> (raw)
In-Reply-To: <20221215093627.956417-1-wei.fang@nxp.com>
On 15/12/2022 10:36, wei.fang@nxp.com wrote:
> From: Wei Fang <wei.fang@nxp.com>
>
> The hibernation mode of AR8031 PHY defaults to be enabled after hardware
> reset. When the cable is unplugged, the PHY will enter hibernation mode
> after about 10 senconds and the PHY clocks will be stopped to save
> power. However, due to the design of EQOS, the mac needs the RX_CLK of
> PHY for software reset to complete. Otherwise the software reset of EQOS
> will be failed and do not work correctly. The only way is to disable
> hibernation mode of AR8031 PHY for EQOS, the "qca,disable-hibernation-mode"
> property is used for this purpose and has already been submitted to the
> upstream, for more details please refer to the below link:
> https://lore.kernel.org/netdev/20220818030054.1010660-2-wei.fang@nxp.com/
This is not a patch for net-next as you indicate in the subject. DTS
patches go via SoC platform maintainers.
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-12-15 10:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-15 9:36 [PATCH net] arm64: dts: imx8dxl: Disable hibernation mode of AR8031 for EQOS wei.fang
2022-12-15 10:13 ` Krzysztof Kozlowski [this message]
2022-12-16 1:06 ` Wei Fang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=035e9326-d507-2930-d1ab-22b95af035f8@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=Frank.Li@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shenwei.wang@nxp.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).