Re: [PATCH v2 10/14] arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro

[Dragan Simic <dsimic@manjaro.org>]

Hello Heiko,

On 2024-10-08 22:39, Heiko Stuebner wrote:
> The patch adding display support for the pinephone pro introduced two
> regulators that contain pinctrl-names props but no pinctrl-assignments.
> 
> Looks like someone forgot the pinctrl settings, so remove the orphans
> for now, until that changes.
> 
> Fixes: 3e987e1f22b9 ("arm64: dts: rockchip: Add internal display
> support to rk3399-pinephone-pro")
> Cc: Martijn Braam <martijn@brixit.nl>
> Cc: Javier Martinez Canillas <javierm@redhat.com>
> Cc: Ondrej Jirman <megi@xff.cz>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Looking good to me, thanks for the patch.  The introduced change
is obviously correct.

Reviewed-by: Dragan Simic <dsimic@manjaro.org>

> ---
>  arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> index 1a44582a49fb..09a016ea8c76 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> @@ -166,7 +166,6 @@ vcc1v8_lcd: vcc1v8-lcd {
>  		regulator-max-microvolt = <1800000>;
>  		vin-supply = <&vcc3v3_sys>;
>  		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
> -		pinctrl-names = "default";
>  	};
> 
>  	/* MIPI DSI panel 2.8v supply */
> @@ -178,7 +177,6 @@ vcc2v8_lcd: vcc2v8-lcd {
>  		regulator-max-microvolt = <2800000>;
>  		vin-supply = <&vcc3v3_sys>;
>  		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
> -		pinctrl-names = "default";
>  	};
> 
>  	vibrator {