From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Vikram Sharma <quic_vikramsa@quicinc.com>,
rfoss@kernel.org, todor.too@gmail.com, mchehab@kernel.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
andersson@kernel.org, konradybcio@kernel.org,
hverkuil-cisco@xs4all.nl, cros-qcom-dts-watchers@chromium.org,
catalin.marinas@arm.com, will@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 7/7] arm64: dts: qcom: qcs8300: Add support for camss
Date: Wed, 13 Aug 2025 22:37:33 +0100 [thread overview]
Message-ID: <03947c1c-1d60-472b-883f-c9875df20245@linaro.org> (raw)
In-Reply-To: <20250813053724.232494-8-quic_vikramsa@quicinc.com>
On 13/08/2025 06:37, Vikram Sharma wrote:
> Add changes to support the camera subsystem on the QCS8300.
>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/qcs8300.dtsi | 171 ++++++++++++++++++++++++++
> 1 file changed, 171 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> index 3cf1d4bc7e4a..538b55a89f28 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> @@ -4641,6 +4641,177 @@ videocc: clock-controller@abf0000 {
> #power-domain-cells = <1>;
> };
>
> + camss: isp@ac78000 {
> + compatible = "qcom,qcs8300-camss";
> +
> + reg = <0x0 0xac78000 0x0 0x1000>,
> + <0x0 0xac7a000 0x0 0x0f00>,
> + <0x0 0xac7c000 0x0 0x0f00>,
> + <0x0 0xac84000 0x0 0x0f00>,
> + <0x0 0xac88000 0x0 0x0f00>,
> + <0x0 0xac8c000 0x0 0x0f00>,
> + <0x0 0xac90000 0x0 0x0f00>,
> + <0x0 0xac94000 0x0 0x0f00>,
> + <0x0 0xac9c000 0x0 0x2000>,
> + <0x0 0xac9e000 0x0 0x2000>,
> + <0x0 0xaca0000 0x0 0x2000>,
> + <0x0 0xacac000 0x0 0x0400>,
> + <0x0 0xacad000 0x0 0x0400>,
> + <0x0 0xacae000 0x0 0x0400>,
> + <0x0 0xac4d000 0x0 0xf000>,
> + <0x0 0xac60000 0x0 0xf000>,
> + <0x0 0xac85000 0x0 0x0d00>,
> + <0x0 0xac89000 0x0 0x0d00>,
> + <0x0 0xac8d000 0x0 0x0d00>,
> + <0x0 0xac91000 0x0 0x0d00>,
> + <0x0 0xac95000 0x0 0x0d00>;
> + reg-names = "csid_wrapper",
> + "csid0",
> + "csid1",
> + "csid_lite0",
> + "csid_lite1",
> + "csid_lite2",
> + "csid_lite3",
> + "csid_lite4",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "tpg0",
> + "tpg1",
> + "tpg2",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1",
> + "vfe_lite2",
> + "vfe_lite3",
> + "vfe_lite4";
> +
> + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&camcc CAM_CC_CORE_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
> + <&camcc CAM_CC_CPAS_IFE_0_CLK>,
> + <&camcc CAM_CC_CPAS_IFE_1_CLK>,
> + <&camcc CAM_CC_CSID_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY1_CLK>,
> + <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY2_CLK>,
> + <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&gcc GCC_CAMERA_SF_AXI_CLK>,
> + <&camcc CAM_CC_ICP_AHB_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
> + <&camcc CAM_CC_IFE_1_CLK>,
> + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
> + clock-names = "camnoc_axi",
> + "core_ahb",
> + "cpas_ahb",
> + "cpas_fast_ahb_clk",
> + "cpas_vfe_lite",
> + "cpas_vfe0",
> + "cpas_vfe1",
> + "csid",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy_rx",
> + "gcc_axi_hf",
> + "gcc_axi_sf",
> + "icp_ahb",
> + "vfe0",
> + "vfe0_fast_ahb",
> + "vfe1",
> + "vfe1_fast_ahb",
> + "vfe_lite",
> + "vfe_lite_ahb",
> + "vfe_lite_cphy_rx",
> + "vfe_lite_csid";
> +
> + interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "csid0",
> + "csid1",
> + "csid_lite0",
> + "csid_lite1",
> + "csid_lite2",
> + "csid_lite3",
> + "csid_lite4",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "tpg0",
> + "tpg1",
> + "tpg2",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1",
> + "vfe_lite2",
> + "vfe_lite3",
> + "vfe_lite4";
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
> + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "ahb",
> + "hf_0";
> +
> + iommus = <&apps_smmu 0x2400 0x20>;
> +
> + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
> + power-domain-names = "top";
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + };
> + };
> + };
> +
> camcc: clock-controller@ade0000 {
> compatible = "qcom,qcs8300-camcc";
> reg = <0x0 0x0ade0000 0x0 0x20000>;
"Eat recycled food, it's good for the environment and okay for you"
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
prev parent reply other threads:[~2025-08-13 21:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-13 5:37 [PATCH v3 0/7] qcom: qcs8300: Add qcs8300 camss support Vikram Sharma
2025-08-13 5:37 ` [PATCH v3 1/7] media: dt-bindings: Add qcom,qcs8300-camss compatible Vikram Sharma
2025-08-13 21:31 ` Bryan O'Donoghue
2025-08-13 5:37 ` [PATCH v3 2/7] media: qcom: camss: Add qcs8300 compatible Vikram Sharma
2025-08-13 5:37 ` [PATCH v3 3/7] media: qcom: camss: Add CSIPHY support for QCS8300 Vikram Sharma
2025-08-13 21:32 ` Bryan O'Donoghue
2025-08-13 5:37 ` [PATCH v3 4/7] media: qcom: camss: enable csid 690 for qcs8300 Vikram Sharma
2025-08-13 21:33 ` Bryan O'Donoghue
2025-08-14 6:54 ` Vikram Sharma
2025-08-13 5:37 ` [PATCH v3 5/7] media: qcom: camss: enable vfe " Vikram Sharma
2025-08-13 21:35 ` Bryan O'Donoghue
2025-08-13 5:37 ` [PATCH v3 6/7] media: qcom: camss: Enumerate resources for QCS8300 Vikram Sharma
2025-08-13 5:37 ` [PATCH v3 7/7] arm64: dts: qcom: qcs8300: Add support for camss Vikram Sharma
2025-08-13 21:37 ` Bryan O'Donoghue [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03947c1c-1d60-472b-883f-c9875df20245@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=andersson@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=quic_vikramsa@quicinc.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).