From: Sricharan R <sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-remoteproc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v5 5/6] remoteproc: qcom: Add support for q6v5-wcss pil
Date: Tue, 14 Nov 2017 16:26:42 +0530 [thread overview]
Message-ID: <03bd1216-7578-2640-dcc2-afaa7bf85854@codeaurora.org> (raw)
In-Reply-To: <1510656794-3815-6-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
On 11/14/2017 4:23 PM, Sricharan R wrote:
> IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan
> (Lithium) IP. An mdt type single image format is used for the
> firmware. So the mdt_load function can be directly used to load
> the firmware. Also add the relevant resets required for this core.
>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Infact should have said,
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> (DT bindings)
Regards,
Sricharan
> Signed-off-by: Sricharan R <sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> ---
> .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 7 ++-
> drivers/remoteproc/Kconfig | 1 +
> drivers/remoteproc/qcom_q6v5_pil.c | 53 +++++++++++++++++++++-
> 3 files changed, 59 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> index 00d3d58..d52d05e 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> @@ -11,6 +11,7 @@ on the Qualcomm Hexagon core.
> "qcom,msm8916-mss-pil",
> "qcom,msm8974-mss-pil"
> "qcom,msm8996-mss-pil"
> + "qcom,ipq8074-wcss-pil"
>
> - reg:
> Usage: required
> @@ -49,11 +50,15 @@ on the Qualcomm Hexagon core.
> Usage: required
> Value type: <phandle>
> Definition: reference to the reset-controller for the modem sub-system
> + reference to the list of 3 reset-controllers for the
> + wcss sub-system
>
> - reset-names:
> Usage: required
> Value type: <stringlist>
> - Definition: must be "mss_restart"
> + Definition: must be "mss_restart" for the modem sub-system
> + Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
> + for the wcss syb-system
>
> - cx-supply:
> - mss-supply:
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index bf04479..e7e9979 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -113,6 +113,7 @@ config QCOM_Q6V5_PIL
> select MFD_SYSCON
> select QCOM_RPROC_COMMON
> select QCOM_SCM
> + select QCOM_MDT_LOADER
> help
> Say y here to support the Qualcomm Peripherial Image Loader for the
> Hexagon V5 based remote processors.
> diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
> index 75ff02d..3c401ff 100644
> --- a/drivers/remoteproc/qcom_q6v5_pil.c
> +++ b/drivers/remoteproc/qcom_q6v5_pil.c
> @@ -129,6 +129,9 @@ struct q6v5 {
> u32 halt_nc;
>
> struct reset_control *mss_restart;
> + struct reset_control *wcss_aon_reset;
> + struct reset_control *wcss_reset;
> + struct reset_control *wcss_q6_reset;
>
> struct qcom_smem_state *state;
> unsigned stop_bit;
> @@ -181,6 +184,7 @@ enum {
> MSS_MSM8916,
> MSS_MSM8974,
> MSS_MSM8996,
> + WCSS_IPQ8074,
> };
>
> static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
> @@ -354,6 +358,21 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
> return 0;
> }
>
> +static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
> +{
> + struct q6v5 *qproc = rproc->priv;
> +
> + return qcom_mdt_load_no_init(qproc->dev, fw, rproc->firmware,
> + 0, qproc->mba_region, qproc->mba_phys,
> + qproc->mba_size);
> +}
> +
> +static const struct rproc_fw_ops q6v5_wcss_fw_ops = {
> + .find_rsc_table = q6v5_find_rsc_table,
> + .load = q6v5_wcss_load,
> + .get_boot_addr = rproc_elf_get_boot_addr,
> +};
> +
> static const struct rproc_fw_ops q6v5_fw_ops = {
> .find_rsc_table = q6v5_find_rsc_table,
> .load = q6v5_load,
> @@ -1057,6 +1076,26 @@ static int q6v5_init_clocks(struct device *dev, struct clk **clks,
> return i;
> }
>
> +static int q6v5_wcss_init_reset(struct q6v5 *qproc)
> +{
> + qproc->wcss_aon_reset = devm_reset_control_get(qproc->dev,
> + "wcss_aon_reset");
> + if (IS_ERR(qproc->wcss_aon_reset))
> + return PTR_ERR(qproc->wcss_aon_reset);
> +
> + qproc->wcss_reset = devm_reset_control_get(qproc->dev,
> + "wcss_reset");
> + if (IS_ERR(qproc->wcss_reset))
> + return PTR_ERR(qproc->wcss_reset);
> +
> + qproc->wcss_q6_reset = devm_reset_control_get(qproc->dev,
> + "wcss_q6_reset");
> + if (IS_ERR(qproc->wcss_q6_reset))
> + return PTR_ERR(qproc->wcss_q6_reset);
> +
> + return 0;
> +}
> +
> static int q6v5_init_reset(struct q6v5 *qproc)
> {
> qproc->mss_restart = devm_reset_control_get_exclusive(qproc->dev,
> @@ -1116,6 +1155,9 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
> return -EBUSY;
> }
>
> + if (qproc->version == WCSS_IPQ8074)
> + return 0;
> +
> child = of_get_child_by_name(qproc->dev->of_node, "mpss");
> node = of_parse_phandle(child, "memory-region", 0);
> ret = of_address_to_resource(node, 0, &r);
> @@ -1159,6 +1201,7 @@ static int q6v5_probe(struct platform_device *pdev)
> qproc = (struct q6v5 *)rproc->priv;
> qproc->dev = &pdev->dev;
> qproc->rproc = rproc;
> + qproc->version = desc->version;
> platform_set_drvdata(pdev, qproc);
>
> init_completion(&qproc->start_done);
> @@ -1208,7 +1251,6 @@ static int q6v5_probe(struct platform_device *pdev)
> if (ret)
> goto free_rproc;
>
> - qproc->version = desc->version;
> qproc->need_mem_protection = desc->need_mem_protection;
> ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
> if (ret < 0)
> @@ -1358,11 +1400,20 @@ static int q6v5_remove(struct platform_device *pdev)
> .ops = &q6v5_ops,
> };
>
> +static const struct rproc_hexagon_res ipq8074_wcss = {
> + .hexagon_mba_image = "IPQ8074/q6_fw.mdt",
> + .need_mem_protection = false,
> + .version = WCSS_IPQ8074,
> + .init_reset = q6v5_wcss_init_reset,
> + .fw_ops = &q6v5_wcss_fw_ops,
> +};
> +
> static const struct of_device_id q6v5_of_match[] = {
> { .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
> { .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
> { .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
> { .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
> + { .compatible = "qcom,ipq8074-wcss-pil", .data = &ipq8074_wcss},
> { },
> };
> MODULE_DEVICE_TABLE(of, q6v5_of_match);
>
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-11-14 10:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-14 10:53 [PATCH v5 0/6] Add support for Hexagon q6v5-wcss integrated core Sricharan R
[not found] ` <1510656794-3815-1-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-11-14 10:53 ` [PATCH v5 1/6] remoteproc: qcom: mdt_loader: Make the firmware authentication optional Sricharan R
2017-11-14 10:53 ` [PATCH v5 4/6] remoteproc: qcom: Split the head and tail of the q6v5-pil rproc start function Sricharan R
2017-11-14 10:53 ` [PATCH v5 5/6] remoteproc: qcom: Add support for q6v5-wcss pil Sricharan R
[not found] ` <1510656794-3815-6-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-11-14 10:56 ` Sricharan R [this message]
2017-12-19 11:51 ` [PATCH v5 0/6] Add support for Hexagon q6v5-wcss integrated core Sricharan R
2017-11-14 10:53 ` [PATCH v5 2/6] remoteproc: Export rproc_elf_get_boot_addr Sricharan R
2017-11-14 10:53 ` [PATCH v5 3/6] remoteproc: qcom: Push reset ops, fw ops, rproc ops in to of_match data Sricharan R
2017-11-14 10:53 ` [PATCH v5 6/6] remoteproc: qcom: Add q6v5-wcss rproc ops Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03bd1216-7578-2640-dcc2-afaa7bf85854@codeaurora.org \
--to=sricharan-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-remoteproc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).