Re: [PATCH v8 1/2] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 17/05/2022 14:14, Keerthy wrote:
> Add VTM bindings documentation. In the Voltage Thermal
> Management Module(VTM), K3 J72XX supplies a voltage
> reference and a temperature sensor feature that are gathered in the band
> gap voltage and temperature sensor (VBGAPTS) module. The band
> gap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>

It seems I am repeating myself... Tags are still missing...

> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +    wkup_vtm0: thermal-sensor@42040000 {
> +        compatible = "ti,j721e-vtm";
> +        reg = <0x42040000 0x350>,
> +            <0x42050000 0x350>,
> +            <0x43000300 0x10>;

Please align the continued entries with opening <.

> +        power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
> +        #thermal-sensor-cells = <1>;
> +    };
> +
> +    mpu_thermal: mpu-thermal {
> +        polling-delay-passive = <250>; /* milliseconds */
> +        polling-delay = <500>; /* milliseconds */
> +        thermal-sensors = <&wkup_vtm0 0>;
> +
> +        trips {
> +                mpu_crit: mpu-crit {

You still have here incorrect/inconsistent indentation. Entire DTS
example goes usually with 4 spaces.

> +                        temperature = <125000>; /* milliCelsius */
> +                        hysteresis = <2000>; /* milliCelsius */
> +                        type = "critical";
> +                };
> +        };
> +    };
> +...


Best regards,
Krzysztof